Increasing the photocatalytic efficiency of ZnWO4 by synthesizing a Bi2WO6/ZnWO4 composite photocatalyst

A novel ZnO/Fe3+-doped Bi2WO6 photocatalyst with triple synergistic effect for solar-driven tetracycline degradation

To address the limited visible-light absorption and rapid charge recombination of Bi2WO6 photocatalysts, this work constructs a Z-scheme ZnO/Fe3+-doped Bi2WO6 heterojunction via a hydrothermal-calcination method. The Fe3+ doping induces the formation of oxygen vacancies and optimizes the band structure, which cooperates with the interface reconstruction of ZnO to expand the light absorption to 480 nm. The hierarchical pore structure simultaneously enhances the mass transfer efficiency, and finally realizes the efficient degradation of tetracycline under visible light (the removal rate is 95.5% in 60 minutes, and the rate is 2.28 times higher than that of the pure phase) and the stable cycle performance is good. Mechanistic studies demonstrate that Z-scheme charge transfer driven by an interfacial built-in electric field ensures effective carrier separation, with photogenerated holes (h+) as key reactive species. The proposed "defect-heterojunction-interface trinity" strategy establishes a new design scheme for bismuth-based Z-scheme photocatalysts.

InVO4 nanosheets decorated with ZnWO4 nanorods: A novel composite and its enhanced photocatalytic performance under solar light

InVO₄ is the most attractive inorganic new-generation material for advanced scientific research, especially in the fields of energy and environmental science. In theory, this stable, non-toxic, energy-efficient metal vanadate semiconductor is expected to exhibit significant catalytic activity owing to its narrow bandgap energy. However, this has not been achieved in practice because of its inherent defects in terms of the separation and migration of charge carriers. In fact, the exploration of this material is still in its infancy, and more research is needed to improve its efficiency and speed up its commercialization. Band gap engineering using heterojunction formation offers better results than other methods, such as morphological variations and doping efforts. In this context, the present study offers a significant solution substantiated by experimental results. This includes the successful synthesis of a novel nanocomposite of InVO₄ nanosheets decorated with ZnWO₄ nanorods with a unique improved light absorption ability. Three composites with 26.48-33.85 nm crystal sizes and 11.74-19.98 m²/g surface area were prepared with tailor-made bandgap energies in the range of 2.52-2.97 eV. Furthermore, they produced high photoexcitation currents with low EIS resistance with respect to their constituents. The as-prepared InVO₄-based novel catalyst almost completely (98.33%) decomposed tetracycline (TC) antibiotic in just 90 min, proving its high efficacy. The enhanced performance of the novel catalyst is 7.6 times that of InVO₄ and 10 times that of ZnWO₄. Moreover, the catalyst intake was significantly small (15 mg/100 mL TC solution).

Synergistic Effect of Amorphous Ti(IV)-Hole and Ni(II)-Electron Cocatalysts for Enhanced Photocatalytic Performance of Bi2WO6

Bi2WO6 has become a common photocatalyst due to its advantages of simple synthesis and high activity. However, the defects of pure Bi2WO6 such as low light reception hinder its application in photocatalysis. In this study, based on the modification of Bi2WO6 with Ti(IV) as a cavity co-catalyst, new Ni- and Ti-doped nanosheets of Bi2WO6 (Ni/Ti-Bi2WO6) were prepared by a one-step wet thermal impregnation method and used for the photocatalytic degradation of tetracycline. The experimental results showed that the photocatalytic activity of Ni/Ti-Bi2WO6 modified by the two-component catalyst was significantly better than those of pure Bi2WO6 and Ti-Bi2WO6 modified with Ti(IV) only. The photocatalytic effect of Ni/Ti-Bi2WO6 with different Ni/Ti molar ratios was investigated by the degradation of TC. The results showed that 0.4Ni/Ti-Bi2WO6 possessed the best photocatalytic performance, with a degradation rate of 92.9% at 140 min TC. The results of cycling experiments showed that the catalyst exhibited high stability after five cycles. The scavenger experiment demonstrated that the h+ and O2− were the main reactive species. The enhanced photocatalytic activity of Bi2WO6 could be attributed to the synergistic effect between the Ti(IV) as a hole cocatalyst and Ni(II) as an electron cocatalyst, which effectively promoted the separation of photogenerated carriers.

Advances in Bi2WO6-Based Photocatalysts for Degradation of Organic Pollutants

With the rapid development of modern industries, water pollution has become an urgent problem that endangers the health of human and wild animals. The photocatalysis technique is considered an environmentally friendly strategy for removing organic pollutants in wastewater. As an important member of Bi-series semiconductors, Bi₂WO₆ is widely used for fabricating high-performance photocatalysts. In this review, the recent advances of Bi₂WO₆-based photocatalysts are summarized. First, the controllable synthesis, surface modification and heteroatom doping of Bi₂WO₆ are introduced. In the respect of Bi₂WO₆-based composites, existing Bi₂WO₆-containing binary composites are classified into six types, including Bi₂WO₆/carbon or MOF composite, Bi₂WO₆/g-C₃N₄ composite, Bi₂WO₆/metal oxides composite, Bi₂WO₆/metal sulfides composite, Bi₂WO₆/Bi-series composite, and Bi₂WO₆/metal tungstates composite. Bi₂WO₆-based ternary composites are classified into four types, including Bi₂WO₆/g-C₃N₄/X, Bi₂WO₆/carbon/X, Bi₂WO₆/Au or Ag-based materials/X, and Bi₂WO₆/Bi-series semiconductors/X. The design, microstructure, and photocatalytic performance of Bi₂WO₆-based binary and ternary composites are highlighted. Finally, aimed at the existing problems in Bi₂WO₆-based photocatalysts, some solutions and promising research trends are proposed that would provide theoretical and practical guidelines for developing high-performance Bi₂WO₆-based photocatalysts.