Chiral pillar[n]arenes: Conformation inversion, material preparation and applications

Preparation of novel chiral stationary phases based on a chiral trianglsalen macrocycle by thiol-ene click chemistry for enantioseparation in high-performance liquid chromatography

Macrocyclic compounds, with unique cyclic structures, well-defined molecular cavities and diverse functional properties, have shown broad application prospects in the fields of molecular recognition, catalysis, separation, and supramolecular chemistry. In this study, a novel chiral trianglsalen macrocycle (CTSM) was synthesized by a one-step condensation reaction of 3,3'-dihydroxy-(1,1'-biphenyl)-4,4'-dicarboxaldehyde with (1R,2R)-1,2-diaminocyclohexane. Then, the CTSM was bonded to thiol-functionalized silica by a thiol-ene click approach to prepare two chiral stationary phases (CSPs), CSP-A and CSP-B, with different spacers for high-performance liquid chromatography (HPLC). The two prepared CSPs exhibit excellent chiral separation performance, and 22 racemates were enantioseparated on these two CSPs, including alcohols, ketones, esters, phenols, organic acids, epoxides, and amines. Among them, 20 racemates achieved baseline separation on CSP-A, while 15 racemates achieved baseline separation on CSP-B. CSP-A shows better chiral separation capability than CSP-B, and most racemates obtain higher resolution (Rs) values because CSP-A features a cationic imidazolium spacer that enhances enantioseparation. Compared with commercial chiral columns (Chiralpak AD-H and Chiralcel OD-H), the prepared CSP-A shows peculiar advantages, achieving the separation of some enantiomers that cannot be separated or cannot be well separated by the two commercial columns. Furthermore, the effects of analyte mass, mobile phase composition, and column temperature on enantioseparation were studied. The two fabricated columns also exhibit good reproducibility and stability. After hundreds of uses of the columns, the relative standard deviations (RSDs, n = 5) for separations were less than 1.16% for the retention time and 3.29% for the Rs value, respectively. Moreover, the RSDs (n = 3) of the Rs value and retention time in terms of column-to-column reproducibility were less than 8.79% and 5.04%, respectively. This work demonstrates the promising potential of CTSM for chiral separation in HPLC.

Diastereoselective Polypseudorotaxane Formation with Planar Chiral Pillar[5]arenes via Co-crystallization Processes

As the number of chiral ring molecules in chiral polyrotaxane increases, the number of possible stereoisomers exponentially increases. Consequently, the selective synthesis of a specific stereoisomer becomes much more challenging. To address this problem, we co-crystallized poly(ethylene glycol) and a diastereomeric ring molecule, pillar[5]arene, in the solid state. The co-crystallization formed polypseudorotaxanes with a high diastereomeric excess (ca. 88 % de), meaning that polypseudorotaxanes containing (S, pS) stereoisomer pillar[5]arene rings were synthesized selectively. By contrast, in solution and evaporation systems, the selectivity remained low (ca. 10 % de). The results suggested that the packing effect by the co-crystallization contributed to the denser assembly of ring molecules on the polymeric chain, resulting in the diastereoselective formation. High diastereoselectivity was also observed even in higher-molecular-weight poly(ethylene glycol)s. These selectivities arose from the cooperative effects of the ring molecules on the polymeric chain, which were supported by calculating the stabilization energy.

Catalytic Enantioselective Synthesis of Planar Chiral Pillar[5]arenes via Asymmetric Sonogashira Coupling

As a novel type of macrocycles with attractive planar chirality, pillar[5]arenes have gained increasing research interest over the past decades, enabling their widespread applications in diverse fields such as porous materials, molecular machines, and chiral luminescence materials. However, the catalytic methodology towards the enantioselective synthesis of planar chiral pillar[5]arenes remains elusive. Here we report a novel method for the enantioselective synthesis of planar chiral pillar[5]arenes via asymmetric Sonogashira coupling, giving access to a wide range of highly functionalized planar chiral pillar[5]arenes, including both homo- and hetero-rimmed ones, with excellent enantioselectivities. Attractively, the resultant planar chiral pillar[5]arenes show great potential for widespread use in many areas such as chiral luminescent materials. This work not only enables the successful synthesis of planar chiral pillar[5]arenes with abundant structural and functional diversity as key building blocks for practical applications but also enriches the asymmetric cross-coupling methodologies in organic synthetic chemistry.

Helical-Sense Matching Facilitates Supramolecular Copolymerization of Helical-Chiral Pillar[5]arenes

Supramolecular polymerization using two-dimensional π-conjugated chiral monomers has been mainly demonstrated because the supramolecular polymerization can be controlled by stereocommunication through π-π stacking between the two-dimensional chiral monomers. We herein report supramolecular copolymerization utilizing three-dimensional pentahedrons with twisted helical chirality through different combinations of helical-chiral acidic and basic pillar[5]arenes as comonomers. In this case, helical-sense matching is key to facilitating the supramolecular copolymerization. Based on the unique helical chirality of the three-dimensional pillared structure of the pillar[5]arenes and alternate ion-pairing interactions between acidic and basic groups on their bilateral rims, the homochiral helical-sense matching system forms kinetically stable nanowire-shaped supramolecular copolymers, generating the supramolecular gel in high concentrations. At elevated temperatures, the nanowire structure undergoes a transformation into thermodynamically stable nanoparticles, resulting in a gel-to-sol transition. This process can be hindered by introducing linear guest molecules, which prohibit the unit swing of pillar[5]arenes and stabilize the nanowires and supramolecular gel. By tailoring the enantiomeric ratio (e.r.) values of the chiral combinations, the helical-sense-dependent gel-to-sol transition was realized, specifically by decreasing the e.r. values. Because of helical-sense mismatching, the heterochiral system generates short, branched nanowires and presents as a turbid solution. These distinct differences reveal that the helical-sense matching between three-dimensional chiral pillar[5]arene comonomers is important for supramolecular copolymerization.

Chiral ionic organic single-crystal and its exfoliated two-dimensional nanosheets with enhanced enantioseparation

A chiral ionic organic single-crystal (CIOC) was prepared for the first time through ionic self-assembly using bipyridium chiral ionic liquid (CIL) and 4,4'-biphenyldisulfonic acid (BDA). The CIOC can be ultrasonically exfoliated to produce two-dimensional nanosheets (2D-NSs). The 2D-NSs presented enhanced enantioseparation compared to the CIOC and CIL when used as gas chromatography stationary phase, which may be due to the exfoliated 2D-NSs exhibiting greater exposure of functional groups. Additionally, better resolution of other organic compounds such as positional isomers, n-alkanes and n-alkanols, Grob mixture, phenols and anilines was obtained in 2D-NSs than CIOC and CIL. This work not only provides a reference for the preparation of chiral ionic organic single-crystals and two-dimensional nanosheets for chiral separation, but also stimulates the preparation of such new ionic organic single-crystals via self-assembly for other potential applications.

A Pillararene-Based Cavitand: Synthesis and Solid-State Capsular Assemblies Induced by Linear Alkanes with Specific Lengths

Herein, a novel pillararene-based cavitand with fixed planar chirality was synthesized by the SuFEx reaction. As demonstrated by single crystal X-ray analysis, host-guest capsules involving this cavitand and linear alkanes with specific lengths are observed in the solid state. The formation of each capsule is driven by hydrogen bonding interactions between a linear alkane molecule and two cavitand molecules, as well as noncovalent interactions between the two cavitand molecules in this capsule.

Histidine-modified pillar[5]arene-functionalized mesoporous silica materials for highly selective enantioseparation

Chiral enantiomers, especially the enantiomers of chiral drugs often exhibit different pharmacological activity, metabolism and toxicity, thus it is of great research significance to scientifically and reasonably develop single chiral drugs with low toxicity and high efficiency. Among them, high performance liquid chromatographic techniques based on chiral stationary phases (CSPs) has become one of the most attractive methods used to evaluate the enantiomeric purity of single-enantiomers compound of pharmacological relevance. In this work, pillar[5]arene functionalized with L- and D-histidine, respectively, were modified on the surface of mesoporous silica as novel chiral stationary phases called L/DHis-BP5-Sil. Notably, L/D-histidine had the characteristics of low steric hindrance and easy derivatization. Although the π-π interaction of imidazole group was weaker than that of benzene ring, the benzene ring bonding imidazole-conjugated ring in the structure produced better enantioseparation effect. The results showed that L/DHis-BP5-Sil can separate a variety of complex structural enantiomers with excellent reproducibility, thermal stability and separation performance. Hence, the unique advantage of the highly selective separation of L/DHis-BP5-Sil provides new insights into the enantioseparation field.

Pillar[5]arenes decorated with six-membered-ring aromatics at all the substitution positions

Macrocyclic molecules have characteristic properties different from linear ones, such as high symmetry and guest-inclusion ability. To bring drastic changes to these properties, direct introduction of many substituents is a challenging but effective tool. Herein, we attain direct installation of ten six-membered-ring aromatic π-units into both rims of a pillar[5]arene. In contrast to previous pillar[n]arenes with less hindered five-membered-ring units, which showed conformational complexity and crushed crystal structures, the per-phenyl-substituted pillar[5]arene has a cylinder-shaped crystal structure with a dichloromethane inside the cavity and is obtained as a single pair of D 5-symmetric enantiomers. The average dihedral angles between the core and peripheral benzene rings sharply increase from 38° to 66°. These differences indicate the importance of local steric repulsion on both rims for determining the structures and properties of macrocycles.

Construction of a pillar[5]arene-based supramolecular chiral polymer linked to aminophosphine salt for chiral recognition of enantiomers of mandelic acid

In recent years, supramolecular chirality has been greatly developed in asymmetric synthesis, chiral sensing and other research fields, but its application in molecular chiral recognition has not been extensively studied. In this paper, L-Boc-tyrosine methoxyester and phosphorus chloride salts were introduced into the framework of pillar[n]arene, and a pillar[5]arene-based supramolecular chiral polymer L-TPP-P was constructed. The supramolecular polymer had stable supramolecular chiral properties and could be used as a chiral solvation reagent for chiral recognition of mandelic acid MA. The molar ratio method and Scatchard plot showed that the complexation ratio of L-TPP-P (pillar[5]arene monomer as the reference object) and MA was 1 : 1, and the complexation constants of L-TPP-P with R-MA and S-MA were 4.51 × 105 M-1 and 6.5 × 104 M-1, respectively. The significant affinity difference of L-TPP-P for different enantiomers of MA showed the excellent chiral recognition and stereoselectivity of pillar[5]arene-based supramolecular polymers for MA. This study provides a new idea for a novel supramolecular polymer chiral recognition reagent or chiral recognition method.

Tuning vibration-induced emission through macrocyclization and catenation

In order to investigate the effect of macrocyclization and catenation on the regulation of vibration-induced emission (VIE), the typical VIE luminogen 9,14-diphenyl-9,14-dihydrodibenzo[a, c]phenazine (DPAC) was introduced into the skeleton of a macrocycle and corresponding [2]catenane to evaluate their dynamic relaxation processes. As investigated in detail by femtosecond transient absorption (TA) spectra, the resultant VIE systems revealed precisely tunable emissions upon changing the solvent viscosity, highlighting the key effect of the formation of [2]catenane. Notably, the introduction of an additional pillar[5]arene macrocycle featuring unique planar chirality endows the resultant chiral VIE-active [2]catenane with attractive circularly polarized luminescence in different states. This work not only develops a new strategy for the design of new luminescent systems with tunable vibration induced emission, but also provides a promising platform for the construction of smart chiral luminescent materials for practical applications.

Preparation and evaluation of two chiral stationary phases based on imidazolyl-functionalized bromoethoxy pillar[5]arene-bonded silica

Chiral pillar[5]arene-based mesoporous silica, an emerging class of chiral structure, possesses excellent characteristics such as abundant chiral active sites, encapsulated cavity and excellent chiral modification, which make them a promising candidate as new chiral stationary phases (CSPs) in enantioseparation. In this study, two imidazole-containing (S)-1-(4-phenyl-1H-imidazol-2-yl)ethanamine and (S)-Histidinol were respectively modified to bromoethoxy pillar[5]arene-bonded silica to construct new chiral stationary phases (sPIE-BP5-Sil and sHol-BP5-Sil) for the separation and analysis of enantiomers. The separation conditions such as mobile phase composition, flow rate and temperature were optimized. Under optimal conditions, both sPIE-BP5-Sil and sHol-BP5-Sil showed good separation performance for different types of enantiomers. Interestingly, sPIE-BP5-Sil and sHol-BP5-Sil showed better enantioselectivity for chiral aromatic compounds and chiral aliphatic compounds, respectively. This enantioseparation result was closely related to the presence of additional aromatic rings and abundant hydroxyl groups in the side chains of the two chiral groups. In addition, the enantioseparation process was further studied by molecular docking simulation. Therefore, this work provided a new strategy for the preparation and application of imidazolyl-derived pillar[5]arene-based chiral stationary phases, which can be efficiently used for screening and separating enantiomers.

Dual Stimuli-Responsive [2]Rotaxanes with Tunable Vibration-Induced Emission and Switchable Circularly Polarized Luminescence

Aiming at the construction of novel stimuli-responsive fluorescent system with precisely tunable emissions, the typical 9,14-diphenyl-9,14-dihydrodibenzo[a, c]phenazine (DPAC) luminogen with attractive vibration-induced emission (VIE) behavior has been introduced into [2]rotaxane as a stopper. Taking advantage of their unique dual stimuli-responsiveness towards solvent and anion, the resultant [2]rotaxanes reveal both tunable VIE and switchable circularly polarized luminescence (CPL). Attributed to the formation of mechanical bonds, DPAC-functionalized [2]rotaxanes display interesting VIE behaviors including white-light emission upon the addition of viscous solvent, as evaluated in detail by femtosecond transient absorption (TA) spectra. In addition, ascribed to the regulation of chirality information transmission through anion-induced motions of chiral wheel, the resolved chiral [2]rotaxanes reveal unique switchable CPL upon the addition of anion, leading to significant increase in the dissymmetry factors (glum ) values with excellent reversibility. Interestingly, upon doping the chiral [2]rotaxanes in stretchable polymer, the blend films reveal remarkable emission change from white light to light blue with significant 6.5-fold increase in glum values up to -0.035 under external tensile stresses. This work provides not only a new design strategy for developing molecular systems with fluorescent tunability but also a novel platform for the construction of smart chiral luminescent materials for practical use.

Alignment and Dynamic Inversion of Planar Chirality in Pillar[n]arenes

Pillar[n]arenes are symmetrical macrocyclic compounds composed of benzene panels with para-methylene linkages. Each panel usually exhibits planar chirality and prefers chirality-aligned states. Because of this feature, pillar[n]arenes are attractive scaffolds for chiroptical materials that are easy to prepare and optically resolve and show intense circular dichroism (CD) signals. In addition, rotation of the panels endows the chirality of pillar[n]arenes with a dynamic nature. The chirality in tubular oligomers and supramolecular assemblies sometimes show time- and procedure-dependent alignment phenomena. Furthermore, the CD signals of some pillar[n]arenes respond to the addition of chiral guests when their dynamic chirality is coupled with host-guest properties. By using diastereomeric pillar[n]arenes with additional chiral structures, the response can also be caused by achiral guests and changes of the environment, providing molecular sensors.

Recent advances in chiral liquid chromatography stationary phases for pharmaceutical analysis

Chirality is a common phenomenon in nature. Different enantiomers of chiral drug compounds have obvious differences in their effects on the human body. Therefore, the separation of chiral drugs plays an extremely important role in the safe utilization of drugs. High-performance liquid chromatography (HPLC) is an effective tool for the separation and analysis of compounds, in which the chromatographic packing plays a key role in the separation. Chiral pharmaceutical separation and analysis in HPLC rely on chiral stationary phases (CSPs). Thus, various CSPs are being developed to meet the needs of chiral drug separation and analysis. In this review, recent developments in CSPs, including saccharides (cyclodextrin, cellulose, amylose and chitosan), macrocycles (macrocyclic glycopeptides, pillar[n]arene and polyamide) and porous organic materials (metal-organic frameworks, covalent organic frameworks, and porous organic cages), for pharmaceutical analysis in HPLC were summarized, the advantages and disadvantages of various stationary phases were introduced, and their development prospects were discussed.

A novel pillar[3]trianglimine macrocycle with a deep cavity used as a chiral selector to prepare a chiral stationary phase by thiol-ene click reaction for enantioseparation in high-performance liquid chromatography

A chiral pillar[3]trianglimine (C60 H72 N6 O6 ) with a deep cavity has been developed as a chiral selector and bonded to thiolated silica by thiol-ene click reaction to fabricate a novel chiral stationary phase for enantioseparation in high-performance liquid chromatography. The enantioseparation performance of the fabricated chiral stationary phase has been evaluated by separating various racemic compounds, including alcohols, esters, amines, ketones, amino acids, and epoxides, in both normal-phase and reversed-phase elution modes. In total, 14 and 17 racemates have been effectively separated in these two separation modes, respectively. In comparison with two widely used chiral columns (Chiralcel OD-H and Chiralpak AD-H), our novel chiral stationary phase offered good chiral separation complementarity, separating some of the tested racemates that could not be separated or were only partially separated on these two commercial columns. The influences of analyte mass, mobile phase composition, and column temperature on chiral separation have been investigated. Good repeatability, stability, and column-to-column reproducibility of the chiral stationary phase for enantioseparation have been observed. After the fabricated column had been eluted up to 400 times, the relative standard deviations (n = 5) of resolution (Rs) and retention time of the separated analytes were < 0.39% and < 0.20%, respectively. The relative standard deviations (n = 3) of Rs and retention time for column-to-column reproducibility were < 4.6% and < 5.2%, respectively. This study demonstrated that the new chiral stationary phase has great prospects for chiral separation in high-performance liquid chromatography.

One-pot synthesis of pillar[5]quinone-amine polymer coated silica as stationary phase for high-performance liquid chromatography

To expand the application of pillararene in chromatographic separation, we designed and fabricated a pillar[5]quinone-amine polymer coated silica through quinone-amine reaction by facile one-pot synthesis method, which was applied as a stationary phase for high-performance liquid chromatography. Separation of hydrophobic compounds, hydrophilic compounds, halogenated aromatic compounds, and 11 aromatic positional isomers was achieved successfully in this stationary phase. Reverse-phase separation mode and hydrophilic-interaction separation mode were proved to exist, indicating the potential application of the mix-mode stationary phase. Studies of chromatographic retention behavior and molecular simulation showed that multiple interactions might play an important role in the separation process, including hydrophobic interaction, hydrogen-bonding interaction, aromatic π-π interaction, electron donor-acceptor interaction, and host-guest interaction. Column repeatability and stability were tested, which showed relative standard deviations of retention time less than 0.2% for continuous 11 injections, and the durability relative standard deviations of retention time were less than 0.91% after 90 days. This novel design strategy would broaden the application of pillararene-based covalent organic polymer in chromatography and separation science.

Homochiral organic molecular cage RCC3-R-modified silica as a new multimodal and multifunctional stationary phase for high-performance liquid chromatography

In this work, homochiral reduced imine cage was covalently bonded to the surface of the silica to prepare a novel high-performance liquid chromatography stationary phase, which was applied for the multiple separation modes such as normal phase, reversed-phase, ion exchange, and hydrophilic interaction chromatography. The successful preparation of the homochiral reduced imine cage bonded silica stationary phase was confirmed by performing a series of methods including X-ray photoelectron spectroscopy, thermogravimetric analysis, and infrared spectroscopy. From the extracted results of the chiral resolution in normal phase and reversed-phase modes, it was demonstrated that seven chiral compounds were successfully separated, among which the resolution of 1-phenylethanol reached the value of 3.97. Moreover, the multifunctional chromatographic performance of the new molecular cage stationary phase was systematically investigated in the modes of reversed-phase, ion exchange, and hydrophilic interaction chromatography for the separation and analysis of a total of 59 compounds in eight classes. This work demonstrated that the homochiral reduced imine cage not only achieved multiseparation modes and multiseparation functions performance with high stability, but also expanded the application of the organic molecular cage in the field of liquid chromatography.

Diastereoselective Rotaxane Synthesis with Pillar[5]arenes via Co-crystallization and Solid-State Mechanochemical Processes

Chiral rotaxanes have attracted much attention in recent decades for their unique chirality based on their interlocked structures. Thus, selective synthesis methods of chiral rotaxanes have been developed. The introduction of substituents with chiral centers to produce diastereomers is a powerful strategy for the construction of chiral rotaxanes. However, in case of a small energy difference between the diastereomers, diastereoselective synthesis is extremely difficult. Herein, we report a new diastereoselective rotaxane synthesis method using solid-phase diastereoselective [3]pseudorotaxane formation and mechanochemical solid-phase end-capping reactions of the [3]pseudorotaxanes. By co-crystallization of stereodynamic planar chiral pillar[5]arene with stereogenic carbons at both rims and axles with suitable end groups and lengths, the [3]pseudorotaxane with a high diastereomeric excess (ca. 92% de) was generated in the solid state because of higher effective molarity with aid by packing effects and significant energy differences between [3]pseudorotaxane diastereomers. In contrast, the de of the pillar[5]arene was low in solution (ca. 10% de) because of a small energy difference between diastereomers. Subsequent end-capping reactions of the polycrystalline [3]pseudorotaxane with high de in solvent-free conditions successfully yielded rotaxanes while maintaining the high de generated by the co-crystallization.

Chiral metal-organic frameworks and their composites as stationary phases for liquid chromatography chiral separation: A minireview

Chiral metal organic frameworks (CMOFs) are a kind of crystal porous framework material that has attracted increasing attention due to the customizable combination of metal nodes and organic ligands. In particular, the highly ordered crystal structure and rich adjustable chiral structure make it a promising material for developing new chiral separation material systems. In this review, the progress of CMOFs and their different types of composites used as chiral stationary phases (CSPs) in liquid chromatography for enantioseparation are discussed. The characteristics of CMOFs and their composites are summarized, aiming to provide new ideas for the development of CMOFs with better performance and further promote the application of CMOFs materials in enantioselective high-performance liquid chromatography (HPLC).

Per-Arylation of Pillar[n]arenes: An Effective Tool to Modify the Properties of Macrocycles

Installation of various substituents is a reliable and versatile way to alter the properties of macrocyclic molecules, but high-yield and controlled methods are not always available especially for multifold reactions. Herein, we report 10- and 12-fold introduction of aryl substituents onto both rims of cylinder-shaped pillar[n]arenes, which usually have alkoxy substituents slanting to the cylinder axes. Although alkoxy pillar[5]arenes exist as D₅-symmetric enantiomeric pairs, arylated pillar[5]arenes provide crushed single-crystal structures and stereoisomerism including C₂-symmetric conformations depending on the aryl groups. Pillar[n]arenes with 2-benzofuranyl groups display bright fluorescence with quantum yields of 88-90% and no host-guest complexation with electron-deficient molecules in solution due to large deviation from alkoxy compounds. A benzofuran-appended pillar[6]arene instead captures small gaseous molecules in the solid state, probably owing to outside spaces surrounded by aromatic rings.

Grafting of Tetraphenylethylene on Silica Surface, Characterizations, and Their Chromatographic Performance as Reversed-Phase Stationary Phases

Surface modification is an effective way to functionalize the materials so as to get some special properties. Tetraphenylethylene (TPE) has been widely investigated as a well-known reagent which has the nature of aggregation-induced emission (AIE), but has never been reported in the liquid chromatography stationary phase. In this work, TPE-grafted silica (Sil-TPE) was obtained successfully using the derivative of 1-(4-hydroxyphenyl)-1,2,2-triphenylethylene as a ligand, and then characterized by elemental analysis, Fourier transform infrared spectra, thermogravimetric analysis, and so forth. Laser scanning confocal microscopy images reflected the AIE phenomenon of grafted TPE because the internal vibration and rotation of TPE molecules were restrained in the confined silica space. The contact angle test showed superhydrophobic properties of Sil-TPE. In order to understand thoroughly the mechanism of chromatographic performance and retention behavior for Sil-TPE, Tanaka test mixture, alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), and phenols were separated. This reveals that Sil-TPE has strong aromaticity and certain shape selectivity, especially, has excellent separation performance for PAHs and phenols. The thermodynamic properties and repeatability of Sil-TPE were further studied, which showed the stability of Sil-TPE. This work shows that TPE can be successfully grafted on silica surface and it has the potential to be a new kind of promising stationary phases in the future.