Application of transient infrared and near infrared spectroscopy to transition metal complex excited states and intermediates

Recent Advances in Probing Electron Delocalization in Conjugated Molecules by Attached Infrared Reporter Groups for Energy Conversion and Storage

This review article reports an overview of the recent developments in the field of electron delocalization study in organic conjugated molecules by utilizing the vibration frequencies exhibited by the attached functional groups such as nitrile (-C≡N), alkyne (-C≡C-), or carbonyl (-C=O). A brief introduction to electron delocalization, methods for study, and their importance is given first, followed by the application of infrared spectroscopy in organic molecules. Details of molecules with various infrared reporter groups have been explained in respective subsections based on the functional groups. All the reported organic molecules have been structured and presented with the electron delocalization properties studied using an infrared reporter group. Finally, an outlook on this recently promising, exciting, and interesting field of probing electron delocalization using infrared reporter groups is provided.

Joint Experimental and Computational Characterization of Sum-Frequency Generation between a Continuous Wave Laser and an Ultrafast Frequency Comb Laser for Tunable Laser Development

Ultrafast optical frequency combs allow for both high spectral and temporal resolution in molecular spectroscopy and have become a powerful tool in many areas of chemistry and physics. Ultrafast lasers and frequency combs generated from ultrafast mode-locked lasers often need to be converted to other wavelengths. Commonly used wavelength conversions are optical parametric oscillators, which require an external optical cavity, and supercontinuum generation combined with optical parametric amplifiers. Whether commercial or home-built, these systems are complex and costly. Here, we investigate an alternative, simple, and easy-to-implement approach to tunable frequency comb ultrafast lasers enabled by new continuous-wave laser technology. Sum-frequency generation between an Nd:YAG continuous-wave laser and a Yb:fiber femtosecond frequency comb in a beta-barium borate (BBO) crystal is explored. The resulting sum-frequency beam is a pulsed frequency comb with the same repetition rate as the Yb:fiber source. SNLO simulation software is used to simulate the results and provide benchmarks for designing future systems to achieve wavelength conversion and tunability in otherwise difficult-to-reach spectral regions.

Scale-Up of Continuous Metallaphotoredox Catalyzed C-O Coupling to a 10 kg-Scale Using Small Footprint Photochemical Taylor Vortex Flow Reactors

We report the development and optimization of a scalable flow process for metallaphotoredox (Ir/Ni) C-O coupling, a mild and efficient approach for forming alkyl-aryl ethers, a common motif in medicinal and process chemistry settings. Time-resolved infrared spectroscopy (TRIR) highlighted the amine as the major quencher of the photocatalyst triplet excited state, along with the formation of an Ir(II) species that, in the presence of the Ni cocatalyst, has its lifetime shortened, suggesting reductive quenching of Ir(III)*, followed by reoxidation facilitated by the Ni cocatalyst. TRIR and batch reaction screening was used to develop conditions transferrable to flow, and many processing benefits of performing the reaction in flow were then demonstrated using a simple to construct/operate, small-footprint FEP coil flow reactor, including short (<10 min) space times and reduced catalyst loadings (down to 0.1 mol % Ir, 1 mol % Ni) while retaining good yield/conversion. Scalability was demonstrated by increasing the length or diameter of the FEP coil flow reactor tubing, however, due to suspected mass transfer/mixing limitations, the yield decreased upon scale-up in some cases. Therefore, we applied a modified version of our previously reported photochemical Taylor Vortex Flow Reactor (PhotoVortex), where Taylor vortices and a short-irradiated path length allow photochemical reactions to be performed efficiently via excellent mixing. In a small PhotoVortex (8 mL irradiated volume), we have demonstrated projected productivities around 1 kg day-1 and >10 kg day-1 in a large PhotoVortex (185 mL irradiated volume) with good product yields (>90%) and low catalyst loadings (0.1 to 0.5 mol % of [Ir{dF(CF3)ppy}2dtbbpy]PF6), enabled by excellent mixing ensuring sufficient mass transfer between short-lived photoexcited and other transient species.

Photoexcitation and One-Electron Reduction Processes of a CO2 Photoreduction Dyad Catalyst Having a Zinc(II) Porphyrin Photosensitizer

We have explored the photophysical properties and one-electron reduction process in the dyad photocatalyst for CO2 photoreduction, ZnP-phen=Re, in which the catalyst of fac-[Re(1,10-phenanthoroline)(CO)3Br] is directly connected with the photosensitizer of zinc(II) porphyrin (ZnP), using time-resolved infrared spectroscopy, transient absorption spectroscopy, and quantum chemical calculations. We revealed the following photophysical properties: (1) the intersystem crossing occurs with a time constant of ∼20 ps, which is much faster than that of a ZnP single unit, and (2) the charge density in the excited singlet and triplet states is mainly localized on ZnP, which means that the excited state is assignable to the π-π* transition in ZnP. The one-electron reduction by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole occurs via the triplet excited state with the time constant of ∼100 ns and directly from the ground state with the time constant of ∼3 μs. The charge in the one-electron reduction species spans ZnP and the phenanthroline ligand, and the dihedral angle between ZnP and the phenanthroline ligand is rotated by ∼24° with respect to that in the ground state, which presumably offers an advantage for proceeding to the next CO2 reduction process. These insights could guide the new design of dyad photocatalysts with porphyrin photosensitizers.

Spectroscopic Characterization of Highly Excited Neutral Chromium Tricarbonyl

Spectroscopic characterization of highly excited neutral transition-metal complexes is important for understanding the multifaceted reaction mechanisms between metals and ligands. In this work, the reactions of neutral chromium atoms with carbon monoxide were probed by size-specific infrared spectroscopy. Interestingly, Cr(CO)3 was found to have an unprecedented 7A2″ septet excited state rather than the singlet ground state. A combination of experiment and theory shows that the gas-phase formation of this highly excited Cr(CO)3 is facile both thermodynamically and kinetically. Electronic structure and bonding analyses indicate that the valence electrons of Cr atoms in the septet Cr(CO)3 are in a relatively stable configuration, which facilitate the highly excited structure and the planar geometric shape (D3h symmetry). The observed septet Cr(CO)3 affords a paradigm for exploring the structure, properties, and formation mechanism of a large variety of excited neutral compounds.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Coupling Pulse Radiolysis with Nanosecond Time-Resolved Step-Scan Fourier Transform Infrared Spectroscopy: Broadband Mid-Infrared Detection of Radiolytically Generated Transients

We describe the first implementation of broadband, nanosecond time-resolved step-scan Fourier transform infrared (S²-FT-IR) spectroscopy at a pulse radiolysis facility. This new technique allows the rapid acquisition of nano- to microsecond time-resolved infrared (TRIR) spectra of transient species generated by pulse radiolysis of liquid samples at a pulsed electron accelerator. Wide regions of the mid-infrared can be probed in a single experiment, which often takes < 20-30 min to complete. It is therefore a powerful method for rapidly locating the IR absorptions of short-lived, radiation-induced species in solution, and for directly monitoring their subsequent reactions. Time-resolved step-scan FT-IR detection for pulse radiolysis thus complements our existing narrowband quantum cascade laser-based pulse radiolysis-TRIR detection system, which is more suitable for acquiring single-shot kinetics and narrowband TRIR spectra on small-volume samples and in strongly absorbing solvents, such as water. We have demonstrated the application of time-resolved step-scan FT-IR spectroscopy to pulse radiolysis by probing the metal carbonyl and organic carbonyl vibrations of the one-electron-reduced forms of two Re-based CO₂ reduction catalysts in acetonitrile solution. Transient IR absorption bands with amplitudes on the order of 1 × 10^-3 are easily detected on the sub-microsecond timescale using electron pulses as short as 250 ns.

Photochemistry of transition metal carbonyls

The purpose of this Tutorial Review is to outline the fundamental photochemistry of metal carbonyls, and to show how the advances in technology have increased our understanding of the detailed mechanisms, particularly how relatively simple experiments can provide deep understanding of complex problems. We recall some important early experiments that demonstrate the key principles underlying current research, concentrating on the binary carbonyls and selected substituted metal carbonyls. At each stage, we illustrate with examples from recent applications. This review first considers the detection of photochemical intermediates in three environments: glasses and matrices; gas phase; solution. It is followed by an examination of the theory underpinning these observations. In the final two sections, we briefly address applications to the characterization and behaviour of complexes with very labile ligands such as N₂, H₂ and alkanes, concentrating on key mechanistic points, and also describe some principles and examples of photocatalysis.

IR linewidth and intensity amplifications of nitrile vibrations report nuclear-electronic couplings and associated structural heterogeneity in radical anions

Conjugated molecular chains have the potential to act as "molecular wires" that can be employed in a variety of technologies, including catalysis, molecular electronics, and quantum information technologies. Their successful application relies on a detailed understanding of the factors governing the electronic energy landscape and the dynamics of electrons in such molecules. We can gain insights into the energetics and dynamics of charges in conjugated molecules using time-resolved infrared (TRIR) detection combined with pulse radiolysis. Nitrile ν(C[triple bond, length as m-dash]N) bands can act as IR probes for charges, based on IR frequency shifts, because of their exquisite sensitivity to the degree of electron delocalization and induced electric field. Here, we show that the IR intensity and linewidth can also provide unique and complementary information on the nature of charges. Quantifications of IR intensity and linewidth in a series of nitrile-functionalized oligophenylenes reveal that the C[triple bond, length as m-dash]N vibration is coupled to the nuclear and electronic structural changes, which become more prominent when an excess charge is present. We synthesized a new series of ladder-type oligophenylenes that possess planar aromatic structures, as revealed by X-ray crystallography. Using these, we demonstrate that C[triple bond, length as m-dash]N vibrations can report charge fluctuations associated with nuclear movements, namely those driven by motions of flexible dihedral angles. This happens only when a charge has room to fluctuate in space.

Excited-State Switching in Rhenium(I) Bipyridyl Complexes with Donor-Donor and Donor-Acceptor Substituents

The optical properties of two Re(CO)₃(bpy)Cl complexes in which the bpy is substituted with two donor (triphenylamine, TPA, ReTPA₂) as well as both donor (TPA) and acceptor (benzothiadiazole, BTD, ReTPA-BTD) groups are presented. For ReTPA₂ the absorption spectra show intense intraligand charge-transfer (ILCT) bands at 460 nm with small solvatochromic behavior; for ReTPA-BTD the ILCT transitions are weaker. These transitions are assigned as TPA → bpy transitions as supported by resonance Raman data and TDDFT calculations. The excited-state spectroscopy shows the presence of two emissive states for both complexes. The intensity of these emission signals is modulated by solvent. Time-resolved infrared spectroscopy definitively assigns the excited states present in CH₂Cl₂ to be MLCT in nature, and in MeCN the excited states are ILCT in nature. DFT calculations indicated this switching with solvent is governed by access to states controlled by spin-orbit coupling, which is sufficiently different in the two solvents, allowing to select out each of the charge-transfer states.

Determining Excited-State Structures and Photophysical Properties in Phenylphosphine Rhenium(I) Diimine Biscarbonyl Complexes Using Time-Resolved Infrared and X-ray Absorption Spectroscopies

We have explored the structural factors on the photophysical properties in two rhenium(I) diimine complexes in acetonitrile solution, cis,trans-[Re(dmb)(CO)₂(PPh₂Et)₂]⁺ (Et(2,2)) and cis,trans-[Re(dmb)(CO)₂(PPh₃)₂]⁺ ((3,3)) (dmb = 4,4'-dimethyl-2,2'-bipyridine, Ph = phenyl, Et = ethyl) using the combination method of time-resolved infrared spectroscopy, time-resolved extended X-ray absorption fine structure, and quantum chemical calculations. The difference between these complexes is the number of phenyl groups in the phosphine ligand, and this only indirectly affects the central Re(I). Despite this minor difference, the complexes exhibit large differences in emission wavelength and excited-state lifetime. Upon photoexcitation, the bond length of Re-P and angle of P-Re-P are significantly changed in both complexes, while the phenyl groups are largely rotated by ∼20° only in (3,3). In contrast, there is little change in charge distribution on the phenyl groups when Re to dmb charge transfer occurs upon photoexcitation. We concluded that the instability from steric effects of phenyl groups and diimine leads to a smaller Stokes shift of the lowest excited triplet state (T₁) in (3,3). The large structural change between the ground and excited states causes the longer lifetime of T₁ in (3,3).

Study of Excited States and Electron Transfer of Semiconductor-Metal-Complex Hybrid Photocatalysts for CO2 Reduction by Using Picosecond Time-Resolved Spectroscopies

A semiconductor-metal-complex hybrid photocatalyst was previously reported for CO₂ reduction; this photocatalyst is composed of nitrogen-doped Ta₂ O₅ as a semiconductor photosensitizer and a Ru complex as a CO₂ reduction catalyst, operating under visible light (>400 nm), with high selectivity for HCOOH formation of more than 75 %. The electron transfer from a photoactive semiconductor to the metal-complex catalyst is a key process for photocatalytic CO₂ reduction with hybrid photocatalysts. Herein, the excited-state dynamics of several hybrid photocatalysts are described by using time-resolved emission and infrared absorption spectroscopies to understand the mechanism of electron transfer from a semiconductor to the metal-complex catalyst. The results show that electron transfer from the semiconductor to the metal-complex catalyst does not occur directly upon photoexcitation, but that the photoexcited electron transfers to a new excited state. On the basis of the present results and previous reports, it is suggested that the excited state is a charge-transfer state located between shallow defects of the semiconductor and the metal-complex catalyst.

Vibrational Spectra of the Ruthenium-Tris-Bipyridine Dication and Its Reduced Form in Vacuo

Experimental IR spectra in the 500–1850 cm^–1 fingerprint frequency range are presented for the isolated, gaseous redox pair ions [Ru(bpy)₃]²⁺, and [Ru(bpy)₃]⁺, where bpy = 2,2′-bipyridine. Spectra are obtained using the FELIX free-electron laser and a quadrupole ion trap mass spectrometer. The 2+ complex is generated by electrospray ionization and the charge-reduced radical cation is produced by gas-phase one-electron reduction in an ion–ion reaction with the fluoranthene radical anion. Experimental spectra are compared against computed spectra predicted by density functional theory (DFT) using different levels of theory. For the closed-shell [Ru(bpy)₃]²⁺ ion, the match between experimental and computed IR spectra is very good; however, this is not the case for the charge-reduced [Ru(bpy)₃]⁺ ion, which demands additional theoretical investigation. When using the hybrid B3LYP functional, we observe that better agreement with experiment is obtained upon reduction of the Hartree–Fock exact-exchange contribution from 20% to about 14%. Additionally, calculations using the M06 functional appear to be promising in terms of the prediction of IR spectra; however, it is unclear if the correct electronic structure is obtained. The M06 and B3LYP functionals indicate that the added electron in [Ru(bpy)₃]⁺ is delocalized over the three bpy ligands, while the long-range corrected LC-BLYP and the CAM-B3LYP functionals show it to be more localized on a single bpy ligand. Although these latter levels of theory fail to reproduce the experimentally observed IR frequencies, one may argue that the unusually large bandwidths observed in the spectrum are due to the fluxional character of a complex with the added electron not symmetrically distributed over the ligands. The experimental IR spectra presented here can serve as benchmark for further theoretical investigations.

Vibrations tell the tale. A time-resolved mid-infrared perspective of the photochemistry of iron complexes

Time-resolved infrared spectroscopies are used to elucidate multiscalar photochemical processes of iron complexes.

Spectroscopic characterization of a new Re(i) tricarbonyl complex with a thiosemicarbazone derivative: towards sensing and electrocatalytic applications

A novel Re(i) complex with a thiosemicarbazone derivative is described and fully characterized. Its was further explored as CO₂ reduction electrocatalyst, being the first complex with a thiosemicarbazone derivative applied to this goal.

Fluorescence-Encoded Infrared Spectroscopy: Ultrafast Vibrational Spectroscopy on Small Ensembles of Molecules in Solution

Fluorescence-encoded infrared (FEIR) spectroscopy is an ultrafast technique that uses a visible pulse to up-convert information about IR-driven vibrations into a fluorescent electronic population. Here we present an updated experimental approach to FEIR that achieves high sensitivity through confocal microscopy, high repetition rate excitation, and single-photon counting. We demonstrate the sensitivity of our experiment by measuring ultrafast vibrational transients and Fourier transform spectra of increasingly dilute solutions of a coumarin dye. We collect high-quality data at 40 μM (∼2 orders of magnitude below the limit for conventional IR) and make measurements down to the 10-100 nM range (∼5 orders of magnitude) before background signals become overwhelming. At 10 nM we measure the average number of molecules in the focal volume to be ∼20 using fluorescence correlation spectroscopy. This level of sensitivity opens up the possibility of performing fluctuation correlation vibrational spectroscopy or-with further improvement-single-molecule measurements.

Towards measuring reactivity on micro-to-millisecond timescales with laser pump, NMR probe spectroscopy

We present a quantitative analysis of the timescales of reactivity that are accessible to a laser pump, NMR probe spectroscopy method using para-hydrogen induced polarisation (PHIP) and identify three kinetic regimes: fast, intermediate and slow.

Vibrational circular dichroism under the quantum magnifying glass: from the electronic flow to the spectroscopic observable

A chemically intuitive method to analyse and interpret vibrational circular dichroism spectra based on the vibrational transition current density.

Insight into the mechanism of CO-release from trypto-CORM using ultra-fast spectroscopy and computational chemistry

Photolysis of trypto-CORM results in ultra-fast CO-dissociation and formation of a 16-e triplet followed by solvation.

Investigation of excited state, reductive quenching, and intramolecular electron transfer of Ru(ii)-Re(i) supramolecular photocatalysts for CO2 reduction using time-resolved IR measurements

Supramolecular photocatalysts in which Ru(ii) photosensitizer and Re(i) catalyst units are connected to each other by an ethylene linker are among the best known, most effective and durable photocatalytic systems for CO2 reduction. In this paper we report, for the first time, time-resolved infrared (TRIR) spectra of three of these binuclear complexes to uncover why the catalysts function so efficiently. Selective excitation of the Ru unit with a 532 nm laser pulse induces slow intramolecular electron transfer from the 3MLCT excited state of the Ru unit to the Re unit, with rate constants of (1.0-1.1) × 104 s-1 as a major component and (3.5-4.3) × 106 s-1 as a minor component, in acetonitrile. The produced charge-separated state has a long lifetime, with charge recombination rate constants of only (6.5-8.4) × 104 s-1. Thus, although it has a large driving force (-ΔG0CR ∼ 2.6 eV), this process is in the Marcus inverted region. On the other hand, in the presence of 1-benzyl-1,4-dihydronicotinamide (BNAH), reductive quenching of the excited Ru unit proceeds much faster (kq[BNAH (0.2 M)] = (3.5-3.8) × 106 s-1) than the abovementioned intramolecular oxidative quenching, producing the one-electron-reduced species (OERS) of the Ru unit. Nanosecond TRIR data clearly show that intramolecular electron transfer from the OERS of the Ru unit to the Re unit (kET > 2 × 107 s-1) is much faster than from the excited state of the Ru unit, and that it is also faster than the reductive quenching process of the excited Ru unit by BNAH. To measure the exact value of kET, picosecond TRIR spectroscopy and a stronger reductant were used. Thus, in the case of the binuclear complex with tri(p-fluorophenyl)phosphine ligands (RuRe(FPh)), for which intramolecular electron transfer is expected to be the fastest among the three binuclear complexes, in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), kET was measured as kET = (1.4 ± 0.1) × 109 s-1. This clearly shows that intramolecular electron transfer in these RuRe binuclear supramolecular photocatalysts is not the rate-determining process in the photocatalytic reduction of CO2, which is one of the main reasons why they work so efficiently.

Dynamic equilibria in supported ionic liquid phase (SILP) catalysis: in situ IR spectroscopy identifies [Ru(CO)xCly]n species in water gas shift catalysis

Ru-based SILP systems efficiently catalyze the low-temperature water-gas shift reaction (WGSR).

Ultrafast structural molecular dynamics investigated with 2D infrared spectroscopy methods

Ultrafast, multi-dimensional infrared (IR) spectroscopy has been advanced in recent years to a versatile analytical tool with a broad range of applications to elucidate molecular structure on ultrafast timescales, and it can be used for samples in a many different environments. Following a short and general introduction on the benefits of 2D IR spectroscopy, the first part of this chapter contains a brief discussion on basic descriptions and conceptual considerations of 2D IR spectroscopy. Outstanding classical applications of 2D IR are used afterwards to highlight the strengths and basic applicability of the method. This includes the identification of vibrational coupling in molecules, characterization of spectral diffusion dynamics, chemical exchange of chemical bond formation and breaking, as well as dynamics of intra- and intermolecular energy transfer for molecules in bulk solution and thin films. In the second part, several important, recently developed variants and new applications of 2D IR spectroscopy are introduced. These methods focus on (i) applications to molecules under two- and three-dimensional confinement, (ii) the combination of 2D IR with electrochemistry, (iii) ultrafast 2D IR in conjunction with diffraction-limited microscopy, (iv) several variants of non-equilibrium 2D IR spectroscopy such as transient 2D IR and 3D IR, and (v) extensions of the pump and probe spectral regions for multi-dimensional vibrational spectroscopy towards mixed vibrational-electronic spectroscopies. In light of these examples, the important open scientific and conceptual questions with regard to intra- and intermolecular dynamics are highlighted. Such questions can be tackled with the existing arsenal of experimental variants of 2D IR spectroscopy to promote the understanding of fundamentally new aspects in chemistry, biology and materials science. The final part of the chapter introduces several concepts of currently performed technical developments, which aim at exploiting 2D IR spectroscopy as an analytical tool. Such developments embrace the combination of 2D IR spectroscopy and plasmonic spectroscopy for ultrasensitive analytics, merging 2D IR spectroscopy with ultra-high-resolution microscopy (nanoscopy), future variants of transient 2D IR methods, or 2D IR in conjunction with microfluidics. It is expected that these techniques will allow for groundbreaking research in many new areas of natural sciences.

Coherent evolution of parahydrogen induced polarisation using laser pump, NMR probe spectroscopy: Theoretical framework and experimental observation

We recently reported a pump-probe method that uses a single laser pulse to introduce parahydrogen (p-H₂) into a metal dihydride complex and then follows the time-evolution of the p-H₂-derived nuclear spin states by NMR. We present here a theoretical framework to describe the oscillatory behaviour of the resultant hyperpolarised NMR signals using a product operator formalism. We consider the cases where the p-H₂-derived protons form part of an AX, AXY, AXYZ or AA'XX' spin system in the product molecule. We use this framework to predict the patterns for 2D pump-probe NMR spectra, where the indirect dimension represents the evolution during the pump-probe delay and the positions of the cross-peaks depend on the difference in chemical shift of the p-H₂-derived protons and the difference in their couplings to other nuclei. The evolution of the NMR signals of the p-H₂-derived protons, as well as the transfer of hyperpolarisation to other NMR-active nuclei in the product, is described. The theoretical framework is tested experimentally for a set of ruthenium dihydride complexes representing the different spin systems. Theoretical predictions and experimental results agree to within experimental error for all features of the hyperpolarised ¹H and ³¹P pump-probe NMR spectra. Thus we establish the laser pump, NMR probe approach as a robust way to directly observe and quantitatively analyse the coherent evolution of p-H₂-derived spin order over micro-to-millisecond timescales.

Photochemical Processes in a Rhenium(I) Tricarbonyl N-Heterocyclic Carbene Complex Studied by Time-Resolved Measurements

We carried out time-resolved infrared (TR-IR) and emission lifetime measurements on a Re(I) carbonyl complex having an N-heterocyclic carbene ligand, namely, fac-[Re(CO)₃(PyImPh)Br], under photochemically reactive (in solution in acetonitrile) and nonreactive (in solution in dichloromethane) conditions to investigate the mechanism of photochemical ligand substitution reactions. The TR-IR measurements revealed that no reaction occurs on a picosecond time scale and the cationic product, namely, fac-[Re(CO)₃(PyImPh)(MeCN)]⁺, is produced on a nanosecond time scale only in solution in acetonitrile, which indicates that the reaction proceeds thermally from the excited state. Because no other products were observed by TR-IR, we concluded that this cationic product is an intermediate species for further reactions. The measurements of the temperature-dependent emission lifetime and analysis using transition-state theory revealed that the photochemical substitution reaction proceeds from a metal-to-ligand charge transfer excited state, the structure of which allows the potential coordination of a solvent molecule. Thus, the coordinating capacity of the solvent determines whether the reaction proceeds or not. This mechanism is different from those of photochemical reactions of other types of Re(I) carbonyl complexes owing to the unique characteristics of the carbene ligand.

Ultrafast transient IR spectroscopy and DFT calculations of ruthenium(ii) polypyridyl complexes

Ultrafast time-resolved infrared spectroscopy of [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine), [Ru(mbpy)₃]²⁺ (mbpy = 6-methyl-2,2'-bipyridine) and [Ru(mphen)₃]²⁺ (mphen = 2-methyl-1,10'-phenanthroline) in deuterated acetonitrile serves to elucidate the evolution of the system following pulsed excitation into the ¹MLCT band at 400 nm. While for [Ru(bpy)₃]²⁺ no intermediate state can be evidenced for the relaxation of the corresponding ³MLCT state back to the ground state, for [Ru(mbpy)₃]²⁺ and [Ru(mphen)₃]²⁺ an intermediate state with a lifetime of about 400 ps is observed. The species associated IR difference spectra of this state are in good agreement with the calculated difference spectra of the lowest energy ³dd state using DFT. The calculated potential energy curves for all the complexes in the triplet manifold along the metal-ligand distance show that for [Ru(bpy)₃]²⁺ the ³dd state is at a higher energy than the ³MLCT state and that there is a substantial barrier between the two minima. For [Ru(mbpy)₃]²⁺ and [Ru(mphen)₃]²⁺, the ³dd state is at a lower energy than the ³MLCT state.

Photochemical pump and NMR probe to monitor the formation and kinetics of hyperpolarized metal dihydrides

Pulsed-laser experiments validate photochemical pump-NMR probe spectroscopy for monitoring the rate of rapid H₂ oxidative addition to a metal centre.

On reaction of IrI(CO)(PPh₃)₂1 with para-hydrogen (p-H₂), Ir(H)₂I(CO)(PPh₃)₂2 is formed which exhibits strongly enhanced ¹H NMR signals for its hydride resonances. Complex 2 also shows similar enhancement of its NMR spectra when it is irradiated under p-H₂. We report the use of this photochemical reactivity to measure the kinetics of H₂ addition by laser-synchronized reactions in conjunction with NMR. The single laser pulse promotes the reductive elimination of H₂ from Ir(H)₂I(CO)(PPh₃)₂2 in C₆D₆ solution to form the 16-electron precursor 1, back reaction with p-H₂ then reforms 2 in a well-defined nuclear spin-state. The build up of this product can be followed by incrementing a precisely controlled delay (τ), in millisecond steps, between the laser and the NMR pulse. The resulting signal vs. time profile shows a dependence on p-H₂ pressure. The plot of k_obs against p-H₂ pressure is linear and yields the second order rate constant, k₂, for H₂ addition to 1 of (3.26 ± 0.42) × 10² M^–1 s^–1. Validation was achieved by transient-UV-vis absorption spectroscopy which gives k₂ of (3.06 ± 0.40) × 10² M^–1 s^–1. Furthermore, irradiation of a C₆D₆ solution of 2 with multiple laser shots, in conjunction with p-H₂ derived hyperpolarization, allows the detection and characterisation of two minor reaction products, 2a and 3, which are produced in such low yields that they are not detected without hyperpolarization. Complex 2a is a configurational isomer of 2, while 3 is formed by substitution of CO by PPh₃.

Contrasting photophysical properties of rhenium(i) tricarbonyl complexes having carbazole groups attached to the polypyridine ligand

The fac-[Re(CO)₃(cbz₂phen)(L)]^0/+1 complexes showed a remarkable presence of the ILCT_cbz2phen fluorescence in addition to the usually observed ³MLCT_{Re→cbz2phen}. In PMMA films the emission is completely turned into a triplet excited state manifold.

Comparison of rhenium-porphyrin dyads for CO2 photoreduction: photocatalytic studies and charge separation dynamics studied by time-resolved IR spectroscopy

We report a study of the photocatalytic reduction of CO2 to CO by zinc porphyrins covalently linked to [ReI(2,2'-bipyridine)(CO)3L]+/0 moieties with visible light of wavelength >520 nm. Dyad 1 contains an amide C6H4NHC(O) link from porphyrin to bipyridine (Bpy), Dyad 2 contains an additional methoxybenzamide within the bridge C6H4NHC(O)C6H3(OMe)NHC(O), while Dyad 3 has a saturated bridge C6H4NHC(O)CH2; each dyad is studied with either L = Br or 3-picoline. The syntheses, spectroscopic characterisation and cyclic voltammetry of Dyad 3 Br and [Dyad 3 pic]OTf are described. The photocatalytic performance of [Dyad 3 pic]OTf in DMF/triethanolamine (5 : 1) is approximately an order of magnitude better than [Dyad 1 pic]PF6 or [Dyad 2 pic]OTf in turnover frequency and turnover number, reaching a turnover number of 360. The performance of the dyads with Re-Br units is very similar to that of the dyads with [Re-pic]+ units in spite of the adverse free energy of electron transfer. The dyads undergo reactions during photocatalysis: hydrogenation of the porphyrin to form chlorin and isobacteriochlorin units is detected by visible absorption spectroscopy, while IR spectroscopy reveals replacement of the axial ligand by a triethanolaminato group and insertion of CO2 into the latter to form a carbonate. Time-resolved IR spectra of [Dyad 2 pic]OTf and [Dyad 3 pic]OTf (560 nm excitation in CH2Cl2) demonstrated electron transfer from porphyrin to Re(Bpy) units resulting in a shift of ν(CO) bands to low wavenumbers. The rise time of the charge-separated species for [Dyad 3 pic]OTf is longest at 8 (±1) ps and its lifetime is also the longest at 320 (±15) ps. The TRIR spectra of Dyad 1 Br and Dyad 2 Br are quite different showing a mixture of 3MLCT, IL and charge-separated excited states. In the case of Dyad 3 Br, the charge-separated state is absent altogether. The TRIR spectra emphasize the very different excited states of the bromide complexes and the picoline complexes. Thus, the similarity of the photocatalytic data for bromide and picoline dyads suggests that they share common intermediates. Most likely, these involve hydrogenation of the porphyrin and substitution of the axial ligand at rhenium.

Synthesis and Photophysical Study of a [NiFe] Hydrogenase Biomimetic Compound Covalently Linked to a Re-diimine Photosensitizer

The synthesis, photophysics, and photochemistry of a linked dyad ([Re]-[NiFe₂]) containing an analogue ([NiFe₂]) of the active site of [NiFe] hydrogenase, covalently bound to a Re-diimine photosensitizer ([Re]), are described. Following excitation, the mechanisms of electron transfer involving the [Re] and [NiFe₂] centers and the resulting decomposition were investigated. Excitation of the [Re] center results in the population of a diimine-based metal-to-ligand charge transfer excited state. Reductive quenching by NEt₃ produces the radically reduced form of [Re], [Re]⁻ (k_q = 1.4 ± 0.1 × 10⁷ M^–1 s^–1). Once formed, [Re]⁻ reduces the [NiFe₂] center to [NiFe₂]⁻, and this reduction was followed using time-resolved infrared spectroscopy. The concentration dependence of the electron transfer rate constants suggests that both inter- and intramolecular electron transfer pathways are involved, and the rate constants for these processes have been estimated (k_inter = 5.9 ± 0.7 × 10⁸ M^–1 s^–1, k_intra = 1.5 ± 0.1 × 10⁵ s^–1). For the analogous bimolecular system, only intermolecular electron transfer could be observed (k_inter = 3.8 ± 0.5 × 10⁹ M^–1 s^–1). Fourier transform infrared spectroscopic studies confirms that decomposition of the dyad occurs upon prolonged photolysis, and this appears to be a major factor for the low activity of the system toward H₂ production in acidic conditions.

Excitation of the [Re] center in the linked-dyad complex ([Re]-[NiFe₂]) populates the ³MLCT excited state, and reductive quenching by NEt₃ produces [Re]⁻. [Re]⁻ reduces the [NiFe₂] center to [NiFe₂]⁻ via inter- and intramolecular electron transfer pathways (k_inter = 5.9 ± 0.7 × 10⁸ M⁻¹ s⁻¹, k_intra = 1.5 ± 0.1 × 10⁵ s⁻¹). For the analogous bimolecular system, where only intermolecular electron transfer could be observed, k_inter = 3.8 ± 0.5 × 10⁹ M⁻¹ s⁻¹.

Spectroelectrochemical identification of charge-transfer excited states in transition metal-based polypyridyl complexes

Identification of transient species is a necessary part of delineating the kinetics and mechanisms associated with chemical dynamics; when dealing with photo-induced processes, this can be an exceptionally challenging task due to the fact that spectra associated with excited state(s) sampled over the course of a photochemical event often cannot be uniquely identified nor readily calculated. Using Group 8 complexes of the general form [M(terpy)2](2+) and [M(bpy)3](2+) as a platform (where terpy is 2,2':6',2''-terpyridine and bpy is 2,2'-bipyridine), we demonstrate how spectroelectrochemical measurements can serve as an effective tool for identifying spectroscopic signatures of charge-transfer excited states of transition metal-based chromophores. Formulating the metal-to-ligand charge-transfer (MLCT) excited state(s) as M(3+)-L(-), the extent to which a linear combination of the spectra of the oxidized and reduced forms of the parent complexes can be used to simulate the characteristic absorptions of MLCT-based transient species is examined. Quantitative agreement is determined to be essentially unachievable due to the fact that certain transitions associated with the optically prepared excited states are either overcompensated for in the spectroelectrochemical data, or simply cannot be replicated through electrochemical means. Despite this limitation, it is shown through several illustrative examples that this approach can still be extremely useful as a qualitative if not semi-quantitative guide for interpreting time-resolved electronic absorption data of charge-transfer compounds, particularly in the ultrafast time domain.

Probing organometallic reactions by time-resolved infrared spectroscopy in solution and in the solid state using quantum cascade lasers

The photochemistry and photophysics of metal carbonyl compounds (W(CO)6, Cp*Rh(CO)2 (Cp* = η(5)-C5Me5), and fac-[Re(CO)3(4,4'-bpy)2Br] [bpy = bipyridine]) have been examined on the nanosecond timescale using a time-resolved infrared spectrometer with an external cavity quantum cascade laser (QCL) as the infrared source. We show the photochemistry of W(CO)6 in alkane solution is easily monitored, and very sensitive measurements are possible with this approach, meaning it can monitor small transients with absorbance changes less than 10(-6) ΔOD. The C-H activation of Cp*Rh(CO)(C6H12) to form Cp*Rh(CO)(C6H11)H occurs within the first few tens of nanoseconds following photolysis, and we demonstrate that kinetics obtained following deconvolution are in excellent agreement with those measured using an ultrafast laser-based spectrometer. We also show that the high flux and tunability of QCLs makes them suited for solid-state and time-resolved measurements.

Photophysical studies of metal to ligand charge transfer involving quadruply bonded complexes of molybdenum and tungsten

Photoinduced metal-to-ligand charge transfer transitions afford numerous applications in terms of photon energy harvesting. The majority of metal complexes studied to date involve diamagnetic systems of d(6), d(8), and d(10) transition metals. These typically have very short-lived, ∼100 fs, singlet metal to ligand charge transfer ((1)MLCT) states that undergo intersystem crossing to triplet metal to ligand charge transfer ((3)MLCT) states that are longer lived and are responsible for much of the photophysical studies. In contrast, the metal-metal quadruply bonded complexes of molybdenum and tungsten supported by carboxylate, O2CR, and related amidinate ligands (RN)2C(R') have relatively long-lived (1)MLCT states arising from M2δ to Lπ* transitions. These have lifetimes in the range 1-20 ps prior to intersystem crossing to T1 states that may be (3)MLCT or (3)MMδδ* with lifetimes of 1-100 ns and 1-100 μs, respectively. The M2 quadruply bonded complexes take the form M2L4 or M2L4-nL'n where n = 1-3. Thus, in their photoexcited MLCT states, these compounds pose the question of how the charge resides on the ligands. This Account reviews the current knowledge of how charge is positioned with time in S1 and T1 states with the aid of active IR reported groups located on the ligands, for example, C≡X multiple bonds (X = C, N, or O). Several examples of localized and delocalized charge distributions are noted along with kinetic barriers to the interconversion of MLCT and δδ* states. On the 50th anniversary of the recognition of the MM quadruple bond, these complexes are revealing some remarkable features in the study of the photophysical properties of metal-ligand charge transfer states.

Altering molecular photophysics by merging organic and inorganic chromophores

Photofunctional molecules and assemblies lie at the heart of many important fundamental processes in nature, and researchers have generated multitudes of artificial chromophores intended to mimic these naturally occurring systems. As dynamic spectroscopic techniques are becoming more widely available, ultrafast techniques in particular, substantial insight continues to be gleaned from the initial photon stimulation event through internal conversion, structural rearrangements, intersystem crossing, energy migration, electron transfer events, and ultimately regeneration of the ground state chromophores in both naturally occurring and inspired chromophores. This Account details research endeavors motivated by the concept that merging organic and inorganic chromophores can lead to new molecules exhibiting novel excited state properties. Moreover, these excited state properties can be fundamentally understood using combinations of static and dynamic spectroscopic tools, yielding systematic improvements to molecules poised for application in diverse research areas including light-harvesting, lifetime engineering, photocatalysis, and photochemical upconversion. Initial explorations focused on utilizing Förster energy transfer processes in Ru(II)-based metal-organic chromophores for solar light-harvesting while maintaining long excited state lifetimes. This eventually led to molecules exhibiting triplet-triplet energy transfer between energetically proximate triplet states featuring thermally activated photoluminescence from the upper charge transfer excited state with markedly extended lifetimes. Interest in systematically producing long-lived excited states with concomitant large Stokes shifts inspired the development of numerous Pt(II) bipyridyl and terpyridyl acetylide charge transfer chromophores featuring ultrafast intramolecular energy migration, high quantum yield ligand-localized phosphorescence at room temperature, and synthetically tunable excited state absorption properties. This structural motif also made it possible to access the triplet excited states of perylenediimide chromophores, permitting quantitative examination of internal conversion and intersystem crossing processes in these complex molecules. The generation of new metal-organic structures featuring unique photophysics appears limitless and simply requires the continued ingenuity of researchers.

Time-resolved IR spectroscopy of a trinuclear palladium complex in solution

Time-resolved IR spectroscopic methods covering the femto- to microsecond range in combination with (TD-)DFT computations were used to investigate the electronically excited state structure of a trinuclear Pd complex.