Design strategies and mechanism studies of CO2 electroreduction catalysts based on coordination chemistry

Atomic Design of Copper Active Sites in Pristine Metal-Organic Coordination Compounds for Electrocatalytic Carbon Dioxide Reduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) has emerged as a promising and sustainable approach to cut carbon emissions by converting greenhouse gas CO2 to value-added chemicals and fuels. Metal-organic coordination compounds, especially the copper (Cu)-based coordination compounds, which feature well-defined crystalline structures and designable metal active sites, have attracted much research attention in electrocatalytic CO2RR. Herein, the recent advances of electrochemical CO2RR on pristine Cu-based coordination compounds with different types of Cu active sites are reviewed. First, the general reaction pathways of electrocatalytic CO2RR on Cu-based coordination compounds are briefly introduced. Then the highly efficient conversion of CO2 on various kinds of Cu active sites (e.g., single-Cu site, dimeric-Cu site, multi-Cu site, and heterometallic site) is systematically discussed, along with the corresponding catalytic reaction mechanisms. Finally, some existing challenges and potential opportunities for this research direction are provided to guide the rational design of metal-organic coordination compounds for their practical application in electrochemical CO2RR.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

1,2-Azolylamidino ruthenium(II) complexes with DMSO ligands: electro- and photocatalysts for CO2 reduction

New 1,2-azolylamidino complexes fac-[RuCl(DMSO)3(NHC(R)az*-κ2N,N)]OTf [R = Me (2), Ph (3); az* = pz (pyrazolyl, a), indz (indazolyl, b)] are synthesized via chloride abstraction from their corresponding precursors cis,fac-[RuCl2(DMSO)3(az*H)] (1) after subsequent base-catalyzed coupling of the appropriate nitrile with the 1,2-azole previously coordinated. All the compounds are characterized by 1H NMR, 13C NMR and IR spectroscopy. Those derived from MeCN are also characterized by X-ray diffraction. Electrochemical studies showed several reduction waves in the range of -1.5 to -3 V. The electrochemical behavior in CO2 media is consistent with CO2 electrocatalytic reduction. The catalytic activity expressed as [icat(CO2)/ip(Ar)] ranged from 1.7 to 3.7 for the 1,2-azolylamidino complexes at voltages of ca. -2.7 to -3 V vs. ferrocene/ferrocenium. Controlled potential electrolysis showed rapid decomposition of the Ru catalysts. Photocatalytic CO2 reduction experiments using compounds 1b, 2b and 3b carried out in a CO2-saturated MeCN/TEOA (4 : 1 v/v) solution containing a mixture of the catalyst and [Ru(bipy)3]2+ as the photosensitizer under continuous irradiation (light intensity of 150 mW cm-2 at 25 °C, λ > 300 nm) show that compounds 1b, 2b and 3b allowed CO2 reduction catalysis, producing CO and trace amounts of formate. The combined turnover number for the production of formate and CO is ca. 100 after 8 h and follows the order 1b < 2b ≈ 3b.

Hydrogenation of CO2 by a Bifunctional PC(sp3 )P Iridium(III) Pincer Complex Equipped with Tertiary Amine as a Functional Group

Reversible hydrogen storage in the form of stable and mostly harmless chemical substances such as formic acid (FA) is a cornerstone of a fossil fuels-free economy. In the past, we have reported a primary amine-functionalized bifunctional iridium(III)-PC(sp3 )P pincer complex as a mild and chemoselective catalyst for the additive-free decomposition of neat formic acid. In this manuscript, we report on the successful application of a redesigned complex bearing tertiary amine functionality as a catalyst for mild hydrogenation of CO2 to formic acid. The catalyst demonstrates TON up to 6×104 and TOF up to 1.7×104  h-1 . In addition to the practical value of the catalyst, experimental and computational mechanistic studies provide the rationale for the design of improved next-generation catalysts.

Ultrastable Cu-Based Dual-Channel Heterowire for the Switchable Electro-/Photocatalytic Reduction of CO2

Catalytic conversion of CO2 into high value-added chemicals using renewable energy is an attractive strategy for the management of CO2 . However, achieving both efficiency and product selectivity remains a great challenge. Herein, a brand-new family of 1D dual-channel heterowires, Cu NWs@MOFs are constructed by coating metal-organic frameworks (MOFs) on Cu nanowires (Cu NWs) for electro-/photocatalytic CO2 reductions, where Cu NWs act as an electron channel to directionally transmit electrons, and the MOF cover acts as a molecule/photon channel to control the products and/or undertake photoelectric conversion. Through changing the type of MOF cover, the 1D heterowire is switched between electrocatalyst and photocatalyst for the reduction of CO2 with excellent selectivity, adjustable products, and the highest stability among the Cu-based CO2 RR catalysts, which leads to heterometallic MOF covered 1D composite, and especially the first 1D/1D-type Mott-Schottky heterojunction. Considering the diversity of MOF materials, the ultrastable heterowires offer a highly promising and feasible solution for CO2 reduction.

Advances in CO2 utilization employing anisotropic nanomaterials as catalysts: a review

Anisotropic nanomaterials are materials with structures and properties that vary depending on the direction in which they are measured. Unlike isotropic materials, which exhibit uniform physical properties in all directions, anisotropic materials have different mechanical, electrical, thermal, and optical properties in different directions. Examples of anisotropic nanomaterials include nanocubes, nanowires, nanorods, nanoprisms, nanostars, and so on. These materials have unique properties that make them useful in a variety of applications, such as electronics, energy storage, catalysis, and biomedical engineering. One of the key advantages of anisotropic nanomaterials is their high aspect ratio, which refers to the ratio of their length to their width, which can enhance their mechanical and electrical properties, making them suitable for use in nanocomposites and other nanoscale applications. However, the anisotropic nature of these materials also presents challenges in their synthesis and processing. For example, it can be difficult to align the nanostructures in a specific direction to impart modulation of a specific property. Despite these challenges, research into anisotropic nanomaterials continues to grow, and scientists are working to develop new synthesis methods and processing techniques to unlock their full potential. Utilization of carbon dioxide (CO₂) as a renewable and sustainable source of carbon has been a topic of increasing interest due to its impact on reducing the level of greenhouse gas emissions. Anisotropic nanomaterials have been used to improve the efficiency of CO₂ conversion into useful chemicals and fuels using a variety of processes such as photocatalysis, electrocatalysis, and thermocatalysis. More study is required to improve the usage of anisotropic nanomaterials for CO₂ consumption and to scale up these technologies for industrial use. The unique properties of anisotropic nanomaterials, such as their high surface area, tunable morphology, and high activity, make them promising catalysts for CO₂ utilization. This review article discusses briefly about various approaches towards the synthesis of anisotropic nanomaterials and their applications in CO₂ utilization. The article also highlights the challenges and opportunities in this field and the future direction of research.

Theoretical Exploration of Peculiar Sandwich-Type Clusters Formed by the Coordination of E92- (E = Si, Ge, Sn) Zintl Clusters: Structural Properties, Active Sites, and Hydrogen Storage

A peculiar heterogeneous metal sandwich fragment {(Ge₉)₂[η⁶-Ge(PdPPh₃)₃]}^4- anion cluster was synthesized for the first time by Xu et al. (Xu, H. L.; Tkachenko, N. V.; Wang, Z. C.; Chen, W. X.; Qiao, L.; Munoz-Castro, A.; Boldyrev, A. I.; Sun, Z. M. Nat. Commun.2020, 11, 5286). In this work, novel analogous sandwich compounds ({(E₉)₂[η⁶-E(PdPH₃)₃]}^4- (E = Si (1), Ge (2), Sn (3)) were studied using quantum chemical calculations and wave function analysis to determine the geometry, bonding nature, aromaticity, active sites, and hydrogen storage. Structural analysis revealed that the clusters were compounds formed by the coordination of two E₉^2- (E = Si, Ge, Sn) Zintl clusters with a central E@Pd₃ (E = Si, Ge, Sn) interlayer. The steric hindrance at both ends is small, facilitating facile attachment to other molecules. The valence states of the central atom E (E = Si, Ge, Sn) are close to zero, indicating that they are stable novel heterometallic sandwich compounds, and the Zintl ligands at both ends are negative, thus they can react with Lewis acids. Bonding analysis showed that the E₉^2- (E = Si, Ge, Sn) cluster has a delocalized framework bonding mode. For aromaticity analysis, we used AdNDP, ELF, LOL, ICSS, and NICS to qualitatively and quantitatively clarify that these clusters possess the characteristics of overall delocalization, σ aromaticity, and remarkable stability. By analyzing the unique structure and predicting the reaction sites, we concluded that the E₉^2- ligand reacts with Lewis acids. Finally, through the adsorption of hydrogen molecules, the average adsorption energies of 1-3 were 0.387, 0.374, and 0.325 eV per H₂ molecule, respectively, meeting the physical adsorption standard, with the adsorption effect of 3 being slightly more superior than that of 1 and 2. Our study represents a substantial step forward in the study of high-density materials for volumetric H₂ storage applications.

Design strategy of a Cu-based catalyst for optimizing the performance in the electrochemical CO2 reduction reaction to multicarbon alcohols

The electrochemical CO₂ reduction reaction (ECRR) is a promising method to reduce excessive CO₂ emissions and achieve a sustainable carbon cycle. Due to the high reaction kinetics and efficiency, copper-based catalysts have shown great application potential for preparing multicarbon (C₂₊) products. C₂₊ alcohols have high economic value and use-value, playing an essential role in modern industry. Therefore, we summarize the latest research progress of the ECRR to synthesize C₂₊ alcohols on Cu-based catalysts and discuss the state-of-the-art catalyst design strategies to improve CO₂ reduction performance. Moreover, we analyzed in detail the specific reaction pathways for the conversion of CO₂ to C₂₊ alcohols based on DFT calculations. Finally, we propose the problems and possible solutions for synthesizing C₂₊ alcohols with copper-based catalysts. We hope that this review can provide ideas for devising ECRR catalysts for C₂₊ alcohols.

CO2 Electroreduction on Carbon-Based Electrodes Functionalized with Molecular Organometallic Complexes—A Mini Review

Heterogeneous electrochemical CO2 reduction has potential advantages with respect to the homogeneous counterpart due to the easier recovery of products and catalysts, the relatively small amounts of catalyst necessary for efficient electrolysis, the longer lifetime of the catalysts, and the elimination of solubility problems. Unfortunately, several disadvantages are also present, including the difficulty of designing the optimized and best-performing catalysts by the appropriate choice of the ligands as well as a larger heterogeneity in the nature of the catalytic site that introduces differences in the mechanistic pathway and in electrogenerated products. The advantages of homogeneous and heterogeneous systems can be preserved by anchoring intact organometallic molecules on the electrode surface with the aim of increasing the dispersion of active components at a molecular level and facilitating the electron transfer to the electrocatalyst. Electrode functionalization can be obtained by non-covalent or covalent interactions and by direct electropolymerization on the electrode surface. A critical overview covering the very recent literature on CO2 electroreduction by intact organometallic complexes attached to the electrode is summarized herein, and particular attention is given to their catalytic performances. We hope this mini review can provide new insights into the development of more efficient CO2 electrocatalysts for real-life applications.

Selective electrochemical reduction of CO2 on compositionally variant bimetallic Cu-Zn electrocatalysts derived from scrap brass alloys

The electrocatalytic reduction of carbon dioxide (CO₂RR) into value-added fuels is a promising initiative to overcome the adverse effects of CO₂ on climate change. Most electrocatalysts studied, however, overlook the harmful mining practices used to extract these catalysts in pursuit of achieving high-performance. Repurposing scrap metals to use as alternative electrocatalysts would thus hold high privilege even at the compromise of high performance. In this work, we demonstrated the repurposing of scrap brass alloys with different Zn content for the conversion of CO₂ into carbon monoxide and formate. The scrap alloys were activated towards CO₂RR via simple annealing in air and made more selective towards CO production through galvanic replacement with Ag. Upon galvanic replacement with Ag, the scrap brass-based electrocatalysts showed enhanced current density for CO production with better selectivity towards the formation of CO. The density functional theory (DFT) calculations were used to elucidate the potential mechanism and selectivity of the scrap brass catalysts towards CO₂RR. The d-band center in the different brass samples with different Zn content was elucidated.

Copper(II) Frameworks with Varied Active Site Distribution for Modulating Selectivity of Carbon Dioxide Electroreduction

Metal-organic frameworks (MOFs) can be utilized as electrocatalysts for CO₂ reduction reaction (CO₂RR) due to their well dispersed metal centers. However, the influence of metal node distribution on electrochemical CO₂RR was rarely explored. Here, three Cu-MOFs with different copper(II) site distribution were employed for CO₂ electroreduction. The Cu-MOFs [Cu(L)SO₄]·H₂O (Cu1), [Cu(L)₂(H₂O)₂](CH₃COO)₂·H₂O (Cu2), and [Cu(L)₂(H₂O)₂](ClO₄)₂ (Cu3) were achieved by using the same ligand 1,3,5-tris(1-imidazolyl)benzene (L) but different Cu(II) salts. The results show that the Faraday efficiency of CO (FE_CO) for Cu1 is 4 times that of the FE_H2, while the FE_CO of Cu2 is twice that of the FE_H2. As for Cu3, there is not much difference between FE_CO and FE_H2. Such difference may arise from the distinct electrochemical active surface area and charge transfer kinetics caused by different copper site distribution. Furthermore, the different framework structures also affect the activity of the copper sites, which was supported by the theoretically calculated Gibbs free energy and electron density, contributing to the selectivity of CO₂RR. This study provides a strategy for modulating the selectivity of CO₂RR by tuning the distribution of the active centers in MOFs.

Influence of Co2+, Cu2+, Ni2+, Zn2+, and Ga3+ on the iron-based trimetallic layered double hydroxides for water oxidation

In this work, we synthesized five novel iron-based trimetallic layered double hydroxides (LDHs) by the urea-assisted co-precipitation method for the electrocatalytic water oxidation reaction (WOR).

A Facile Strategy for Constructing a Carbon-Particle-Modified Metal-Organic Framework for Enhancing the Efficiency of CO2 Electroreduction into Formate

Electrocatalytic reduction of CO₂ by metal-organic frameworks (MOFs) has been widely investigated, but insufficient conductivity limits application. Herein, a porous 3D In-MOF {(Me₂ NH₂ )[In(BCP)]⋅2 DMF}_n (V11) with good stability was constructed with two types of channels (1.6 and 1.2 nm diameter). V11 exhibits moderate catalytic activity in CO₂ electroreduction with 76.0 % of Faradaic efficiency for formate (FE_HCOO- ). Methylene blue molecules of suitable size and pyrolysis temperature were introduced and transformed into carbon particles (CPs) after calcination. The performance of the obtained CPs@V11 is significantly improved both in FE_HCOO- (from 76.0 % to 90.1 %) and current density (2.2 times). Control experiments show that introduced CPs serve as accelerant to promote the charges and mass transfer in framework, and benefit to sufficiently expose active sites. This strategy can also work on other In-MOFs, demonstrating the universality of this method for electroreduction of CO₂ .

Boosting the charge transfer of FeOOH/Ni(OH)2 for excellent oxygen evolution reaction via Cr modification

For the electrocatalytic oxygen evolution reaction (OER) in alkaline media, there is an urgent need to optimize the adsorption strength of OH*. Here, a flower-like hybrid of Cr-doped FeOOH/Ni(OH)2 was used as an OER catalyst with a low overpotential of 291 mV at 50 mA cm-2. The results showed that faster charge transfer was achieved at the electrode/solution interface during the OER process after the FeOOH/Ni(OH)2 was modified by Cr, which facilitates the rate-determining step of the Volmer reaction. Furthermore, the results of faradaic efficiency and X-ray photoelectron spectroscopy (XPS) measurements confirmed that the synergistic effect between the ternary metal and oxygen vacancies led to excellent OER performance. This work provides a new strategy for the preparation of high-efficiency and low-cost oxygen evolution electrocatalysts.

A water-stable terbium metal–organic framework as a highly sensitive fluorescent sensor for nitrite

A terbium metal–organic framework was synthesized for highly sensitive nitrite detection. The mechanism of the quenching process was also studied in detail.