Ferrous metal-organic frameworks with strong electron-donating properties for persulfate activation to effectively degrade aqueous sulfamethoxazole

Laterite Integrated Persulfate Based Advanced Oxidation and Biological Treatment for Textile Industrial Effluent Remediation: Optimization and Field Application

This study investigated a combined approach of a persulfate-based advanced oxidation process (AOP) followed by biological treatment of a textile industrial effluent. The effluent from the textile industry is primarily composed of various dyes in varying concentrations, resulting in high chemical oxygen demand (COD) and biological oxygen demand (BOD). The model pollutant rhodamine B (RhB) was used in the optimization studies. During the persulfate oxidation process (PSO), persulfate activation is required to generate sulfate radicals (SO4 •-). Raw laterite soil was used as a catalyst for the treatment of RhB in batch studies, and it was able to reduce the dye concentration by about 20% in 60 min of operation, with initial RhB concentrations of 150 mg L-1 and persulfate concentrations of 200 mg L-1. Furthermore, alkali-treated laterite soil (ATLS) was used as a catalyst, achieving 57%-60% removal in 60 min at pH 3 and complete removal after 72 h of biological treatment. Furthermore, the optimized conditions were tested on real field waters to determine efficiency, and it was observed that the PSO removed approximately 45% of COD, with further biological treatment for 72 h increasing the removal efficiency to 64%. All other parameters of water quality were reduced by more than 60%.

Removal of sulfonamides by persulfate-based advanced oxidation: A mini review

Sulfonamides (SAs) are known for their persistence and have become one of the most frequently detected pharmaceuticals and personal care products (PPCPs) in the environments. The widespread presence of SAs in natural waters, wastewater, soil, and sediment has prompted growing concern due to their potential threats to both human health and ecological systems. Persulfate-based advanced oxidation processes (PS-AOPs) have emerged as a promising technology for effectively mitigating the presence of these pollutants in the environment. This review offers a comprehensive overview of the degradation of SAs by PS-AOPs. The various activation methods of persulfate for the purpose of removing SAs are elaborated upon in detail. The factors influencing the removal efficiency of SAs through PS-AOPs is thoroughly discussed. Additionally, the conceivable mechanisms and degradation pathways associated with various types of SAs are discussed. Lastly, existing challenges are identified, and future prospects pertaining to the utilization of PS-AOPs for efficient SA removal are presented.

Advances and challenges in the removal of organic pollutants via sulfate radical-based advanced oxidation processes by Fe-based metal-organic frameworks: A review

Organic contaminants, notorious for their complexity and resistance to degradation, are prevalent in aquatic environments, posing severe threats to ecosystems. Sulfate radical-based advanced oxidation processes (SR-AOPs), known for their stability and high effectiveness, have become a common choice for treating organic wastewater. Metal-organic framework materials (MOFs) have garnered substantial attention due to their facile chemical manipulation, unique structural configurations, and other favorable properties. Therefore, this article critically reviews recent advances in research involving the utilization of Fe-based MOFs (Fe-MOFs) and their derivatives in SR-AOPs. Specifically, it highlights the manipulation of influencing factors within the system to enhance the degradation of organic pollutants. The mechanisms and applications underlying the degradation of organic pollutants in the SR-AOPs system are also elucidated.

Fe3O4/biochar modified with molecularly imprinted polymer as efficient persulfate activator for salicylic acid removal from wastewater: Performance and specific recognition mechanism

In this study, a novel Fe3O4-based biochar coupled surface-imprinted polymer was constructed via simple hydrothermal route for salicylic acid recognition and degradation in advanced oxidation processes. The material exhibited excellent adsorption capability, up to 118.23 mg g-1, and efficient degradation performance, 87.44% removal rate within 240 min, based on integrating the advantages of both huge specific surface area as well as abundant functional groups from biochars and specific recognition sites from imprinted cavities. Moreover, high selectivity coefficient (11.67) showed stable recognition in single and binary systems. SO4•- and •OH were confirmed as reactive oxygen species in catalytic reaction according to quenching experiments and EPR analysis. The degradation mechanism and pathway were unraveled by DFT calculations and LC-MS. Furthermore, the results of toxicity evaluation, stability and reusability demonstrated application potential in the field of water environment restoration. This study confirmed that molecular imprinting provided a promising solution to targeted removal of emerging environmental pollutants by degrading after the enrichment of pollutants to the composites surface.

Progress in the Elimination of Organic Contaminants in Wastewater by Activation Persulfate over Iron-Based Metal-Organic Frameworks

The release of organic contaminants has grown to be a major environmental concern and a threat to the ecology of water bodies. Persulfate-based Advanced Oxidation Technology (PAOT) is effective at eliminating hazardous pollutants and has an extensive spectrum of applications. Iron-based metal-organic frameworks (Fe-MOFs) and their derivatives have exhibited great advantages in activating persulfate for wastewater treatment. In this article, we provide a comprehensive review of recent research progress on the significant potential of Fe-MOFs for removing antibiotics, organic dyes, phenols, and other contaminants from aqueous environments. Firstly, multiple approaches for preparing Fe-MOFs, including the MIL and ZIF series were introduced. Subsequently, removal performance of pollutants such as antibiotics of sulfonamides and tetracyclines (TC), organic dyes of rhodamine B (RhB) and acid orange 7 (AO7), phenols of phenol and bisphenol A (BPA) by various Fe-MOFs was compared. Finally, different degradation mechanisms, encompassing free radical degradation pathways and non-free radical degradation pathways were elucidated. This review explores the synthesis methods of Fe-MOFs and their application in removing organic pollutants from water bodies, providing insights for further refining the preparation of Fe-MOFs.

Boosted micropollutant removal over urchin-like structured hydroxyapatite-incorporated nickel magnetite catalyst via peroxydisulfate activation

In this work, urchin-like structured hydroxyapatite-incorporated nickel magnetite (NiFe3O4/UHdA) microspheres were developed for the efficient removal of micropollutants (MPs) via peroxydisulfate (PDS) activation. The prepared NiFe3O4/UHdA degraded 99.0 % of sulfamethoxazole (SMX) after 15 min in 2 mM PDS, having a first-order kinetic rate constant of 0.210 min-1. In addition, NiFe3O4/UHdA outperformed its counterparts, i.e., Fe3O4/UHdA and Ni/UHdA, by giving rise to corresponding 3.6-fold and 8.6-fold enhancements in the SMX removal rate. The outstanding catalytic performance can be ascribed to (1) the urchin-like mesoporous structure with a large specific surface area and (2) the remarkable synergistic effect caused by the redox cycle of Ni3+/Ni2+ and Fe2+/Fe3+ that enhances multipath electron transfers on the surface of NiFe3O4/UHdA to produce more reactive oxygen species. Moreover, the effects of several reaction parameters, in this case the initial solution pH, PDS dosage, SMX concentration, catalyst loading, co-existing MPs and humic acid level on the catalytic performance of the NiFe3O4/UHdA + PDS system were systematically investigated and discussed in detail. The plausible catalytic mechanisms in the NiFe3O4/UHdA + PDS system were revealed via scavenging experiments and electron paramagnetic resonance analysis, which indicated a radical (•OH and SO4•-) as the major pathway and a nonradical (1O2) as the minor pathway for SMX degradation. Furthermore, NiFe3O4/UHdA exhibited fantastic magnetically separation and retained good catalytic activity with a low leached ion concentration during the performance of four cycles. Overall, the prepared NiFe3O4/UHdA with outstanding PDS activation could be a promising choice for the degradation of persistent organic pollutants from wastewater.

Mechanisms of interaction between metal-organic framework-based material and persulfate in degradation of organic contaminants (OCs): Activation, reactive oxygen generation, conversion, and oxidation

Metal-organic frameworks (MOFs)-based materials have been of great public interest in persulfate (PS)-based catalytic oxidation for wastewater purification, because of their excellent performance and selectiveness in organic contaminants (OCs) removal in complex water environments. The formation, fountainhead and reaction mechanism of reactive oxygen species (ROSs) in PS-based catalytic oxidation are crucial for understanding the principles of PS activation and the degradation mechanism of OCs. In the paper, we presented the quantitative structure-activity relationship (QSAR) of MOFs-based materials for PS activation, including the relationship of structure and removal efficiency, active sites and ROSs as well as OCs. In various MOFs-based materials, there are many factors will affect their performances. We discussed how various surface modification projects affected the characteristics of MOFs-based materials used in PS activation. Moreover, we revealed the process of ROSs generation by active sites and the oxidation of OCs by ROSs from the micro level. At the end of this review, we putted forward an outlook on the development trends and faced challenges of MOFs for PS-based catalytic oxidation. Generally, this review aims to clarify the formation mechanisms of ROSs via the active sites on the MOFs and the reaction mechanism between ROSs and OCs, which is helpful for reader to better understand the QSAR in various MOFs/PS systems.

Sulfate Radical-Based Degradation of Organic Pollutants: A Review on Application of Metal-Organic Frameworks as Catalysts

The degradation of organic pollutants present in domestic and industrial effluents is a matter of concern because of their high persistence and ecotoxicity. Recently, advanced oxidation processes (AOPs) are being emphasized for organic pollutant removal from effluents, as they have shown higher degradation efficiencies when compared to conventional activated sludge processes. Sulfate radical-based methods are some of the AOPs, mainly carried out using persulfate (PS) and peroxymonosulfate (PMS), which have gained attention due to the ease of sulfate radical generation and the effective degradation of organic molecules. PMS is gaining more popularity because of its high reactivity and ability to generate excess sulfate radicals. PMS has been the major focus; therefore, its mechanism has been explained, and limitations have been elaborated. The involvement of metal-organic frameworks for PMS/PS activation applied to organic pollutant removal and recent advances in the application of biochar and hydrogel-assisted metal-organic frameworks have been discussed.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

The potential of a natural iron ore residue application in the efficient removal of tetracycline hydrochloride from an aqueous solution: insight into the degradation mechanism

In the existing research, most of the heterogeneous catalysts applied in the activation of persulfate to degrade organic pollutants were synthesized from chemical reagents in the laboratory. In this paper, we have obtained a spent iron ore (IO) residue directly collecting from the iron ore plants, and efficiently activating peroxydisulfate (PS) to produce reactive free radicals. The experimental results demonstrated that the IO could effectively activate PS to degrade tetracycline hydrochloride (TCH), with TCH removal rate reaching up to 85.6% within 2 h at room temperature. The TCH removal rate was increased with increasing iron ore dosage, while the more acidic pH condition would be favorable to TCH removal process. The material characterization results demonstrated that the dominant components of IO were Fe₃O₄ and FeOOH. The transformation from Fe(II) to Fe(III) at the surface IO was observed after TCH degradation. What's more, the quenching experiment and EPR detection results confirmed that the sulfate radical (SO₄^•-) and hydroxyl radicals (•OH) would be acting as the main free radicals for TCH degradation. This study could not only explore a novel way to recycle the discarded iron ore, but also further expand its application in an effective activation of PS in an aqueous solution.

Perspective on Fe0-PS synergetic effect and reaction mechanism in the thallium(I) contaminated water treatment

Due to extreme toxicity of the element of thallium (Tl), increasing aqueous Tl pollution incidents have aroused growing concerns. As the prevalent and stable form, i.e., monovalent Tl, the highly efficient removal methodologies of Tl(I) from (waste)water remains limited and challenging. In this study, an advanced oxidation method, the feasibility of using zero valent iron (Fe⁰) coupled with persulfate (PS) to treat Tl(I)-containing synthetic wastewater was investigated. Its influence parameters, including reaction time, initial Tl concentration, dosages of PS and Fe⁰, initial and coagulation pH, temperature, coexisting ions and organic matter (NO₃^-, SO₄^2-, Cl^- and HA) were examined. The results revealed that the system can be applied to a wide range of pH and temperature and the reaction equilibrium can be reached in about 30 min. Favorable Tl(I) removal rate (>98%) was observed in the synthetic wastewater with medium and relatively high Tl(I) concentration (≤0.250 mM). The analyses of characterization results including electron spin resonance spectrometer and X-ray photoelectron spectroscopy indicated that ·OH played a vital role in the removal of Tl(I), which was oxidized and removed by co-precipitation. Fe⁰ can be served as a stable source of Fe²⁺ to efficiently catalyze PS. The remaining Fe⁰ can be easily separated because of its magnetism, assuring the promising reusability of the reactant. The study aims to provide references for treatment of real Tl polluted wastewater.

Accelerate sulfamethoxazole degradation and detoxification by persulfate mediated with Fe2+&dithionite: Experiments and DFT calculation

Advanced oxidation process (AOPs) is one of the most effective technologies for organic pollutants removal. In this study, diverse reactive species generation and enhanced sulfamethoxazole (SMX) degradation were investigated based on persulfate (PDS) activated by Fe²⁺&dithionite (DTN). When involving Fe²⁺&dithionite in PDS, SMX degradation efficiency reached 84 % within 30 min following a pseudo-first-order kinetic, which was higher than those in Fe²⁺/PDS (50.4 %) and Fe²⁺/O₂/DTN (41.3 %). SO₄^•- and ^•OH were identified as dominant reactive species with a crucial role of FeSO₃⁺ based on quenching experiment and electron spin resonance (ESR). The contributions of SO₄^·-, ^·OH, and other species to SMX degradation were 60.1 %, 33.9 %, and 6 %, respectively. In Fe²⁺/DTN/PDS system, SMX was effectively degraded under nearly neutral pH (5.0-9.0), with activation energy of 96.04 kJ·mol^-1. The experiments and density functional theory (DFT) calculation demonstrated that three functional groups (benzenesulfonamido, benzene ring, and oxazole ring) were attacked for SMX degradation. Moreover, acute toxicity to Vibrio fischeri has enhanced in the earlier degradation process due to the intermediates and weaken with the continuous reaction. This work not only provides a high-activity SO₄^·--AOP for refractory pollutant treatment with possible dual radical generation resources, but elucidated diverse reactive species formation with Fe²⁺&dithionite.

Recent progress of functional metal-organic framework materials for water treatment using sulfate radicals

Human health is being threatened by the ever-increasing water pollution. Sulfate radical (SO₄^•-)-based advanced oxidation processes (SR-AOPs) are rapidly being developed and gaining considerable attention due to their high oxidation potential and selectivity as a way to purify water by degrading organic contaminants in it. Among the catalytic materials that can activate the precursor to generate SO₄^•-, metal-organic frameworks (MOFs) are the most promising heterogeneous catalytic material in SR-AOPs because of their various structure possibilities, large surface area, ordered porous structure, and regular activation sites. Herein, an in-depth overview of MOFs and their derivatives for water purification with SR-AOPs is provided. The latest studies on pristine MOFs, MOF composites, and MOF derivatives (metal oxides, metal-carbon hybrids, and carbon materials) are summarized. The mechanisms of decomposition of pollutants in water via radical and non-radical pathways are also discussed. This review suggests future research directions for water purification through MOF-based SR-AOP.

Strategies for improving the catalytic activity of metal-organic frameworks and derivatives in SR-AOPs: Facing emerging environmental pollutants

As persulfate activator, Metal organic frameworks (MOFs) and derivatives are widely concerned in degradation of emerging environmental pollutants by advanced oxygen technology dominated by sulfate radical () (SR-AOPs). However, the poor stability and low catalytic efficiency limit the performance of MOFs, requiring multiple strategies to further enhance their catalytic activity. The aim of this paper is to improve the catalytic activity of MOFs and their derivatives by physical and chemical enhancement strategies. Physical enhancement strategies mainly refer to the activation strategies including thermal activation, microwave activation and photoactivation. However, the physical enhancement strategies need energy consumption and require high stability of MOFs. As a substitute, chemical enhancement strategies are more widely used and represented by optimization, modification, composites and derivatives. In addition, the identification of reactive oxygen species, active site and electron distribution are important for distinguishing radical and non-radical pathways. Finally, as a new wastewater treatment technology exploration of unknown areas in SR-AOPs could better promote the technology development.

A facial strategy to efficiently improve catalytic performance of CoFe2O4 to peroxymonosulfate

Cobalt iron spinel (CoFe₂O₄) has been considered as a good heterogeneous catalysis to peroxymonosulfate (PMS) in the degradation of persistent organic pollutants due to its magnetic properties and good chemical stability. However, its catalytic activity needs to be further improved. Here, a facial strategy, "in-situ substitution", was adopted to modify CoFe₂O₄ to improve its catalytic performance just by suitably increasing the Co/Fe ratio in synthesis process. Compared with CoFe₂O₄, the newly synthesized Co_1.5Fe_1.5O₄, could not only significantly improve the degradation efficiency of phenol, from 50.69 to 93.6%, but also exhibited more effective mineralization ability and higher PMS utilization. The activation energy advantage for phenol degradation using Co_1.5Fe_1.5O₄ was only 44.2 kJ/mol, much lower than that with CoFe₂O₄ (127.3 kJ/mol). A series of related representations of CoFe₂O₄ and Co_1.5Fe_1.5O₄ were compared to explore the possible reasons for the outstanding catalytic activity of Co_1.5Fe_1.5O₄. Results showed that Co_1.5Fe_1.5O₄ as well represented spinel crystal as CoFe₂O₄ and the excess cobalt just partially replaced the position of iron without changing the original structure. Co_1.5Fe_1.5O₄ had smaller particle size (8.7 nm), larger specific surface area (126.3 m²/g), which was more favorable for exposure of active sites. Apart from the superior physical properties, more importantly, more reactive centers Co (Ⅱ) and surface hydroxyl compounds generated on Co_1.5Fe_1.5O₄, which might be the major reason. Furthermore, Co_1.5Fe_1.5O₄ behaved good paramagnetism, wide range of pH suitability and strong resistance to salt interference, making it a new prospect in environmental application.

A novel polydopamine-modified metal organic frameworks catalyst with enhanced catalytic performance for efficient degradation of sulfamethoxazole in wastewater

In this study, a novel polydopamine (PDA)-modified metal organic frameworks (MOFs) catalyst (MIL/PDA) was successfully fabricated to activate persulfate (PS) for the degradation of sulfamethoxazole (SMX) in wastewater. The experimental results indicated that PDA-modified catalyst exhibited superior catalytic performance and enhanced the degradation of SMX (91.5%) compared to pure MOFs. The physical-chemical properties of the MIL/PDA catalyst were comprehensively characterized, and the applications in the catalytic degradation of SMX were evaluated. It was found that the modification of PDA enhanced the electron transfer, while promoting the redox cycle of Fe(III)/Fe(II), which in turn boosted the production of active oxygen species. Furthermore, MIL/PDA showed high stability and reusable performance over multiple cycles. Both radical and non-radical pathways were jointly involved in the activation process of PS were confirmed by quenching experiments combined with electron paramagnetic resonance (EPR). Based on this, the possible mechanism of the catalytic reaction was investigated. Finally, five degradation pathways of SMX degradation were proposed according to the results of liquid chromatography-mass spectrometry (LC-MS). This work provided a new insight into the design of novel and efficient heterogeneous catalysts for advanced wastewater treatment.

Modulated construction of Fe-based MOF via formic acid modulator for enhanced degradation of sulfamethoxazole：Design, degradation pathways, and mechanism

Metal-organic frameworks (MOFs) have attracted more attention because of their excellent environmental catalytic capabilities. Modulation approach as an advanced assistant strategy is vital essential to enhancing the performance of MOFs. In this study, the modulated method was used to successfully synthesize a group of Fe-based MOFs, with formic acid as the modulator on the synthesis mixture. The most modulated sample Fe-MOFs-2 exhibit high specific surface areas and higher catalytic activity, which could effectively degrade SMX via PS activation, with almost 95% removal efficiency within 120 min. The results revealed that the % RSE of modulated Fe-MOFs-2 increased from 2.31 to 3.27 when compared with the origin Fe-MOFs. This may be due to the addition of formic acid induces the formation of more coordinatively unsaturated metal sites in the catalyst, resulting in structural defects. In addition, the quenching experiment and EPR analysis verified SO₄^-·and·OH as the major active free radicals in the degradation process. Modulated Fe-MOFs-2 demonstrated good reusability and stability under fifth cycles. Finally, four possible degradation pathways and catalytic mechanism of Fe-MOFs-2 was tentatively proposed. Our work provides insights into the rational design of modulated Fe-MOFs as promising heterogeneous catalysts for advanced wastewater treatment.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

In Situ EPR Spin Trapping and Competition Kinetics Demonstrate Temperature-Dependent Mechanisms of Synergistic Radical Production by Ultrasonically Activated Persulfate

Ultrasound coupled with activated persulfate can synergistically degrade aqueous organic contaminants. Here, in situ electron paramagnetic resonance spin trapping was used to compare radicals produced by ultrasonically activated persulfate (US-PS) and its individual technologies, ultrasound alone (US) and heat-activated persulfate (PS), with respect to temperature. Radicals were trapped using 5,5-dimethyl-1-pyrroline-N-oxide, DMPO, to form detectable nitroxide adducts. Using initial rates of radical adduct formation, and compared to US and PS, US-PS at 40 and 50 °C resulted in the largest synergistic production of radicals. Radicals generated from US were reasonably consistent from 40 to 70 °C, indicating that temperature had little effect on cavitational bubble collapse over this range. However, synergy indexes calculated from initial rates showed that ultrasonic activation of persulfate at the bubble interface changes with temperature. From these results, we speculate that higher temperatures enhance persulfate uptake into cavitation bubbles via nanodroplet injection. DMPO-OH was the predominant adduct detected for all conditions. However, competition modeling and spin trapping in the presence of nitrobenzene and atrazine probes showed that SO₄^•- predominated. Therefore, the DMPO-OH signal is derived from SO₄^•- trapping with subsequent DMPO-SO₄^- hydrolysis to DMPO-OH. Spin trapping is effective in quantifying total radical adduct formation but limited in measuring primary radical speciation in this case.

IR792-MCN@ZIF-8-PD-L1 siRNA drug delivery system enhances photothermal immunotherapy for triple-negative breast cancer under near-infrared laser irradiation

Background

Despite extensive investigations on photothermal therapy, the clinical application is restricted due to poor stability, low therapeutic efficacy of photothermal therapy agents and its affinity loss in the multistep synthesis of delivery carriers. To address this, we designed an IR792-MCN@ZIF-8-PD-L1 siRNA (IM@ZP) nanoparticle drug delivery system. IM@ZP was prepared by in situ synthesis and physical adsorption, followed by characterization. Photothermal conversion ability of IM@ZP was assessed by irradiation of near-infrared (NIR) laser, followed by analysis of its effect on 4T1 cell viability, maturation of dendritic cells (DCs) and the secretion of related cytokines in vitro, and the changes of tumor infiltrating T cells and natural killer (NK) cells in vivo. Subcutaneous 4T1 tumor-bearing mouse and lung metastasis models were established to investigate the role of IM@ZP in killing tumor and inhibiting metastasis in vivo.

Results

IM@ZP was uniform nanoparticles of 81.67 nm with the characteristic UV absorption peak of IR792, and could effectively adsorb PD-L1 siRNA. Under the irradiation of 808 nm laser, IM@ZP exhibited excellent photothermal performance. IM@ZP could be efficiently uptaken by 4T1 cells, and had high transfection efficiency of PD-L1 siRNA. Upon NIR laser irradiation, IM@ZP effectively killed 4T1 cells, upregulated HSP70 expression, induced DC maturation and increased secretion of TNF-α and IL-6 in vitro. Moreover, in vivo experimental results revealed that IM@ZP enhanced photothermal immunotherapy as shown by promoted tumor infiltrating CD8 +  and CD4 +  T cells and NK cells, and inhibited tumor growth and lung metastasis.

Conclusion

Together, biocompatible IM@ZP nanoparticles result in high photothermal immunotherapy efficiency and may have a great potential as a delivery system for sustained cancer therapy.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01255-6.

Brønsted-acid sites promoted degradation of phthalate esters over MnO2: Mineralization enhancement and aquatic toxicity assessment

Advanced oxidation processes (AOPs) are important technologies for aqueous organics removal. Despite organic pollutants can be degraded via AOPs generally, high mineralization of them is hard to achieve. Herein, we synthesized a manganese oxide nanomaterial (H2-OMS-2) with abundant Brønsted-acid sites via ion-exchange of cryptomelane-type MnO₂ (OMS-2), and tested its catalytic performance for the degradation of phthalate esters via peroxymonosulfate (PMS) activation. About 99% of dimethyl phthalate (DMP) at a concentration of 20 mg/L could be degraded within 90 min and 82% of it could be mineralized within 180 min over 0.6 g/L of catalyst and 1.8 g/L of PMS. The catalyst could activate PMS to generate SO₄^-˙ and ·OH as the dominant reactive oxygen species to reach complete degradation of DMP. Especially, the higher TOC removal rate was obtained due to the rich Brønsted-acid sites and surface oxygen vacancies on the catalyst. Kinetics and mechanism study showed that Mn^II/Mn^III might work as the active sites during the catalytic process with a lower reaction energy barrier of 55.61 kJ/mol. Furthermore, the catalyst could be reused for many times through the regeneration of the catalytic ability. The degradation and TOC removal efficiencies were still above 98% and 65% after seven consecutive cycles, respectively. Finally, H2-OMS-2-catalyzed AOPs significantly reduced the organismal developmental toxicity of the DMP wastewater through the investigation of zebrafish model system. The present work, for the first time, provides an idea for promoting the oxidative degradation and mineralization efficiencies of aqueous organic pollutants by surface acid-modification on the catalysts.

Sulfur-modified chitosan derived N,S-co-doped carbon as a bifunctional material for adsorption and catalytic degradation sulfamethoxazole by persulfate

N,S-co-doped carbons were synthesized through the calcination of sulfur-modified chitosan for the first time, and utilized as persulfate activators for sulfamethoxazole (SMX) remediation in water. The chitosan and sulfonyl chloride underwent one-step sulfonylation reaction to generate S-modified chitosan. The catalyst NSC-3 showed both excellent adsorption and catalytic oxidation efficiency, corresponding 98.62% removal and 81.34% mineralization rate within 90 min. The rate constant (k_obs) was up to 0.0578 min^-1, with 75.60-folders higher than that of sulfur-free catalyst NC (7.6580 ×10^-4 min^-1). The synergy of N and S contributed to the improvement of removal efficiency. The adsorption and oxidation performance were highly depended on the S/N atomic ratio. At the S/N ratio of 0.18, the maximum adsorption and oxidation capability were obtained. The NSC-3/PS system exhibited outstanding adaptability at the wide pH range from 3.07 to 9.28, while the inhibitory effect occurred at strong basic conditions (pH = 11.01). The thiophene sulfur and structural defects were identified as the catalytic sites in activating PS. Both radical and non-radical pathways were responsible for degradation process, where ¹O₂ played a major role, SO₄^·-exerted a minor contribution, and O₂^·- acts as the precursor for the production of ¹O₂. Another source of ¹O₂ was assigned to the activation of PS by structure defects. This work indicates that N,S-co-doped carbon at an optimal S/N atomic ratio effectively catalyzes persulfate, and provides an innovative method to construct bifunctional carbon materials of adsorption and oxidization.

Targeted degradation of TBBPA using novel molecularly imprinted polymer encapsulated C-Fe-Nx nanocomposite driven from MOFs

To improve the efficacy of organic pollutant removal using sulfate radicals, we designed MIP@C-Fe-Nx, a molecularly imprinted material capable of targeting the degradation of tetrabromobisphenol A (TBBPA), which can be used as both adsorbent and catalyst to recognize and degrade Tetrabromobisphenol A (TBBPA) accurately, and the final removal rate of TBBPA can reach 104.6 mg·g^-1. Based on the synergistic effects of MIP@C-Fe-Nx on the excellent organic pollutant recognition and catalytic performance, low concentrations of TBBPA can be pre-targeted, concentrated, and fixed on the surface of MIP, and degraded simultaneously in-situ by·OH and SO₄^•- which are produced by activating PS with C-Fe-Nx. Recognition experiments demonstrated that MIPs had perfect performance in recognizing and adsorbing TBBPA and debromination intermediates. The DFT calculations and HPLC-MS analysis indicated that MIP@C-Fe-Nx had a targeted recognition and accumulation for TBBPA and debromination intermediates, for example, dibromobisphenol A, monobromobisphenol A, and bisphenol A, thus avoid the formation of toxic intermediates causing secondary contamination.

Activation of peroxymonosulfate by iron oxychloride with hydroxylamine for ciprofloxacin degradation and bacterial disinfection

Iron oxychloride (FeOCl) is a known effective iron-based catalyst and has been used in advanced oxidation processes (AOPs). This study intends to achieve more facile free radicals generation from peroxymonosulfate (PMS) activation by exploring the Fe(III)/Fe(II) cycle of FeOCl in the presence of hydroxylamine (HA). With 0.2 g/L FeOCl, 1.5 mM PMS, and 1 mM HA, the PMS/FeOCl/HA system could effectively achieve 98.88% of the oxidative degradation of 5 mg/L ciprofloxacin (CIP) in 15 min and quickly inactivate 99.99% of E. coli (10⁸ CFU/mL) in 5 min at near-neutral pH. HA played an important role in promoting the Fe(III)/Fe(II) cycle, thereby greatly improving the oxidation activity of the system. The reactive oxygen species (ROS) such as HO, SO₄^- and O₂^- were identified as the dominated free radicals produced in the system. The intermediate products of CIP detected by liquid chromatograph-mass spectrometer (LC-MS) and three possible degradation pathways of CIP were proposed. The presence of common anions in the PMS/FeOCl/HA system, including HCO₃^-, Cl^-, SO₄^2-, and NO₃^-, enhanced the degradation efficiency of CIP to varying degrees at the concentrations of 10 mM. Moreover, FeOCl maintained a high degradation capability for CIP after several recycles. This work offers a new promising means of catalyzing the PMS-based AOPs in the degradation of refractory organics.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

Application of Magnetic Composites in Removal of Tetracycline through Adsorption and Advanced Oxidation Processes (AOPs): A Review

Water pollution induced by the tetracycline (TC) has caused global increasing attention owing to its extensive use, environmental persistence, and potential harm for human health. Adsorption and advanced oxidation processes (AOPs) have been promising techniques for TC removal due to ideal effectiveness and efficiency. Magnetic composites (MCs) which exploit the combined advantages of nano scale, alternative sources, easy preparation, and separation from wastewater are widely used for catalysis and adsorption. Herein, we intensively reviewed the available literature in order to provide comprehensive insight into the applications and mechanisms of MCs for removal of TC by adsorption and AOPs. The synthesis methods of MCs, the TC adsorption, and removal mechanisms are fully discussed. MCs serve as efficient adsorbents and photocatalysts with superior performance of photocatalytic performance in TC degradation. In addition, the TC can be effectively decomposed by the Fenton-based and SO4•− mediated oxidation under catalysis of the reported MCs with excellent catalytic performance. Based on the existing literature, we further discuss the challenge and future perspectives in MCs-based adsorption and AOPs in removing TC.

Porous loofah-sponge-like ternary heterojunction g-C3N4/Bi2WO6/MoS2 for highly efficient photocatalytic degradation of sulfamethoxazole under visible-light irradiation

A novel porous loofah-sponge-like ternary heterojunction g-C₃N₄/Bi₂WO₆/MoS₂ (CN-BM) was prepared via a facile method. The introduction of binary Bi₂WO₆/MoS₂ into g-C₃N₄ could be qualified for constructing reasonable heterostructure while regulating photocatalysts morphology. Benefiting from the unique structure, the ternary heterojunction composites not only inhibited the agglomeration but also exhibited the prominent visible-light harvest capacity and abundant active sites, which could accelerate the photogenerated carriers separation and preserve the robust redox ability. The results showed that the optimized sample (CN-BM2) displayed the excellent degradation efficiency of sulfamethoxazole (SMX) under visible-light irradiation (over 99% within 60 min), and the fitted pseudo-first-order kinetic rate constant reached to 0.089 min^-1, where it was 3.17 times than that of pure CN. Additionally, the radical scavenger experiments and electron spin resonance experiments indicated that the active species super-oxide radical and hole played a major role in the degradation experiment. The charge transfer mechanism was proposed and the main intermediates indicated that the active radicals attacked on the benzene ring and isoxazole ring in SMX, and further mineralized to inorganic molecules eventually.

Insight into degradation mechanism of sulfamethoxazole by metal-organic framework derived novel magnetic Fe@C composite activated persulfate

Novel Fe@C composites derived from metal-organic framework (MOF) were synthesized. Being subject to pyrolysis under different temperatures endows these Fe@Cs diverse physical-chemical properties, including morphology, crystal structure, defect level, magnetism, and most importantly, iron phase composition. Fe@C-800 consists mainly of Fe₃C and α-Fe, thus possesses strong ferromagnetic properties, which imparts the ability to be separated and recycled. Its catalytic activity towards the activation of persulfate (PS) and the decomposition of sulfamethoxazole (SMX) was found to be the best among all the Fe@Cs, and this activity can be regenerated by simple heat treatment. Given the mixed form of iron and N-doped carbon, α-Fe/Fe₃C species provide electrons for PS to decompose and generate sulfate radical (SO₄·^-), hydroxyl radical (·OH), and superoxide radical (O₂·^-), initiating the radical pathway for partial SMX degradation. The positively charged C atoms on PS bonded Fe@C, as well as the conversion of O₂·^- give rise to the generation of singlet oxygen (¹O₂), which was responsible for the non-radical pathway for SMX degradation. As a consequence, SMX was degraded to intermediates through five degradation pathways, and finally mineralized to inorganic molecules. The results indicate that Fe@C-800 has great potential to serve as a promising activator for persulfate-mediated environmental remediation.

Water stable SiO2-coated Fe-MOF-74 for aqueous dimethyl phthalate degradation in PS activated medium

The poor water stability of metal-organic frameworks (MOFs) significantly hindered their catalytic application in advanced oxidation system. A protective outer layer was an effective strategy to solve this problem. However, the commonly used coating techniques are too complicated or too difficult to accurately control, thus, the applicability was relatively low. In this study, a water stable MOF core-SiO₂ shell nanomaterial (Fe-MOF-74@SiO₂) was synthesized by a facile hydrothermal method, and applied to activate persulfate (PS) for dimethyl phthalate (DMP) degradation. The catalyst water stability and DMP degradation in the system were investigated, suggesting that the SiO₂-coated catalyst was more stable and exhibited higher DMP degradation efficiency over the pure MOF. It was found that pH had negligible effects on Fe-MOF-74@SiO₂ + PS system, while, higher temperature facilitated the degradation of DMP. The activation mechanism was studied by quenching experiments combined with electron paramagnetic resonance, indicating that SO₄^⋅- played a major role in the activation of PS with Fe-MOF-74@SiO₂ for DMP removal, while ^⋅OH also involved in the catalytic process. Finally, possible DMP degradation pathways were proposed. These findings indicated that the core-shell structured Fe-MOF-74@SiO₂ showed promise for DMP degradation by PS advanced oxidation system.

Degradation of antibiotics in aqueous media using manganese nanocatalyst-activated peroxymonosulfate

ε-MnO₂ effectively activates peroxymonosulfate (PMS) for the efficient degradation of emerging pollutants. ε-MnO₂ was synthesized by a facile thermal-treatment method and its long-term stability and efficiency for the elimination of emerging pollutants, including sulfamethoxazole (SMX), sulfachloropyridazine (SCP), sulfamethazine (SMT), ciprofloxacin (CIP), and azithromycin (AZI), from aqueous media were evaluated. ε-MnO₂ was found to activate PMS more efficiently than α-MnO₂, β-MnO₂, or δ-MnO₂, owing to its high - OH-group content, unique structure, and high surface area. Sulfate (SO₄^•-), hydroxyl (•OH), and superoxide (O₂^•-) radicals, as well as singlet oxygen (¹O₂) were generated, with O₂^•- acting as the ¹O₂ precursor. The ε-MnO₂/PMS system proved to be effective in the pH range of 3.5-9.0 and the rate of SMX degradation was not significantly affected by the presence of inorganic anions or natural organic matter. The proposed pathway for the activation of PMS by ε-MnO₂ includes inner-sphere interactions between ε-MnO₂ and PMS, and electron transfer to PMS via the MnIII ↔ MnIV redox cycle, which generates reactive oxygen species. These findings provide new insight into PMS activation by less-toxic metal oxides as catalysts and demonstrate that Mn-based materials can be used to effectively treat water matrices containing emerging pollutants.

Targeted degradation of dimethyl phthalate by activating persulfate using molecularly imprinted Fe-MOF-74

Adsorptive removal of dimethyl phthalate (DMP) in water combined with advanced oxidation processes (AOPs) has attracted interest. In this work, the adsorptive and catalytic properties of an Fe-based metal-organic framework (Fe-MOF-74) have been improved by molecular imprinting technique. The adsorption behaviors have been evaluated by the Freundlich and pseudo-second-order model. The results have shown that selective adsorption ability of the material for DMP was highly enhanced and chemisorption was dominating. A 1.5-fold increase in catalytic rate after being modified by molecular imprinting indicated that the selective adsorption is crucial. In the synergy of adsorption and catalysis, DMP was first specifically adsorbed on the surface of the material by hydrogen bonds and electrostatic interactions. Then, hydroxyl radicals and sulfate radicals, which were both generated via activation of persulfate (PS), catalytically oxidized DMP. The degradation rate can rapidly reach around 90% in 30 min and three possible degradation pathways were proposed. The molecular imprinting modified catalyst can be used for DMP effective degradation in water.

Comparison of acoustic and hydrodynamic cavitation based hybrid AOPs for COD reduction of commercial effluent from CETP

The present work investigates the treatment of commercial effluent obtained from Common Effluent Treatment Plants (CETP) using acoustic cavitation (AC) and hydrodynamic cavitation (HC) based hybrid AOPs. Comparison of different hybrid AOPs viz. H₂O₂, Fe²⁺/H₂O₂, Fe²⁺/H₂O₂/Air, Fe²⁺/H₂O₂/S₂O₈^2- and Fe²⁺/H₂O₂/S₂O₈^2-/Air in combination with both AC and HC has been performed in terms of extent of chemical oxygen demand (COD) reduction and kinetic rate constants. The best results of COD reduction as 95.2% and 97.28% were obtained for AC/Fe²⁺/H₂O₂/Air and HC/Fe²⁺/H₂O₂/Air systems respectively at Fe²⁺/H₂O₂ ratio of 0.1 and pH of 2 within 60 min of treatment under conditions of ultrasonic power dissipation as 150 W, inlet pressure for HC as 4 bar (as applicable depending on process) and temperature of 30 ± 2 °C. Slightly lower efficacy was established for the combination approach involving AC or HC coupled with Fe²⁺-activated S₂O₈^2- and H₂O₂ yielding COD reduction of 82.9% and 86.93% for the AC/Fe²⁺/H₂O₂/S₂O₈^2-/Air and HC/Fe²⁺/H₂O₂/S₂O₈^2-/Air systems respectively at Fe²⁺/H₂O₂/S₂O₈^2- ratio of 1:40:17.5. Cost estimation on the basis of cavitational yield performed on the AC and HC based treatment systems revealed economical nature of HC based treatment. Kinetic studies were also performed by fitting the experimental data with pseudo first order kinetic model (PFOKM), generalized kinetic model (GKM) and Behnajady-Modirshahla-Ghanbery kinetic model (BMGKM). It was demonstrated that GKM provided best fitting for all the experiments whereas BMGKM was most suitable for Fenton based reactions. It was clearly established that complex CETP effluent can be effectively treated using the combined approaches based on HC with potential for larger scale operation.

Single-atom catalysis in advanced oxidation processes for environmental remediation

This review presents the recent advances in synthetic strategies, characterisation, and computations of carbon-based single-atom catalysts, as well as their innovative applications and mechanisms in advanced oxidation technologies.

Progress and challenges of metal-organic frameworks-based materials for SR-AOPs applications in water treatment

As environmental problems become more and more severe, sulfate radical (SO₄^-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal efficiency of recalcitrant organic pollutants in water. Metal-organic frameworks (MOFs) have attracted wide attention in SR-AOPs due to their outstanding properties (e.g. large surface area, ultra-high porosity, and diversity of material design, etc). Herein, we present an overview of the development and challenges in the synthesis of different types of MOFs, combination of MOFs with other materials (metal centers, conductors, cellulose, etc.) and the construction of catalysts with special structures (core-shell structures and hollow structures) as well as their applications in SR-AOPs for the degradation of organic pollutants. Several review papers have already mentioned the application of a branch of MOFs or simple composites of MOFs in SR-AOP, whereas the latest progresses on the application of MOFs-based materials to SR-AOPs was described rarely. Besides, the degradation mechanism of MOFs as catalysts has not been systematically discussed. To this end, the mechanisms of MOFs and MOF-based materials as catalysts to activate PMS/PS in different systems are analyzed, including radicals and non-radicals pathways. Meanwhile, considering that the research in this field is still in its infancy, a lot of improvements are still needed to effectively promote and implement this technology.

Lanthanum Nickel Oxide: An Effective Heterogeneous Activator of Sodium Persulfate for Antibiotics Elimination

In recent years, the presence of pharmaceutically active compounds (PhACs) in surface waters and wastewaters has b the effectiveness of conventional water treatment methods. Towards this direction, advanced oxidation processes (AOPs) for the complete elimination of micro pollutants in waters have become an emerging area of research. The present study reports the heterogeneous activation of sodium persulfate (SPS) by LaNiO3 (LNO) perovskite oxide for the degradation of sulfamethoxazole (SMX), an antibiotic agent. LNO was prepared according to a combustion method, and its physicochemical characteristics were identified by means of XRD, BET, TEM, and SEM/EDS. SMX degradation results showed the great efficiency of LNO for SPS activation. Increasing LNO and SPS dosage up to 250 mg/L enhanced the SMX degradation. In contrast, increasing SMX concentration resulted in longer time periods for its degradation. Considering the pH effect, SMX removal was obstructed under basic conditions, while the efficiency was enhanced at near-neutral conditions. The present system’s activity was also tested for piroxicam (PIR) and methylparaben (MeP) degradation, showing promising results. Unfortunately, experiments conducted in real water matrices such as bottled water (BW) and wastewater (WW), showed that SMX removal was limited to less than 25% in both cases. The hindering effects were mainly attributed to bicarbonate ions and organic matter present in aqueous media. The results obtained using suitable radical scavengers revealed the contribution of both hydroxyl and sulfate radicals in degradation reactions. Finally, LNO exhibited good stability under consecutive experimental runs.