Fluorescent linear polyurea based on toluene diisocyanate: Easy preparation, broad emission and potential applications

High-Toughness CO2-Sourced Ionic Polyurea Adhesives

Polyurea (PUa) adhesives are renowned for their exceptional adhesion to diverse substrates even in harsh environments. However, the presence of quadruple bidentate intermolecular hydrogen bonds in the polymer chains creates a trade-off between cohesive energy and interfacial adhesive energy. To overcome this challenge, a series of CO2-sourced ionic PUa adhesives with ultratough adhesion to various substrates are developed. The incorporated ionic segments within the adhesive serve to partially mitigate the intermolecular hydrogen bonding interactions while conferring unique electrostatic interactions, leading to both high cohesive energy and interfacial adhesive energy. The maximum adhesive strength of 10.9 MPa can be attained by ionizing the CO2-sourced PUa using bromopropane and subsequently exchanging the anion with lithium bis(trifluoromethylsulfonyl)imide. Additionally, these ionic PUa adhesives demonstrate several desirable properties such as low-temperature stability (-80 °C), resistance to organic solvents and water, high flame retardancy, antibacterial activity, and UV-fluorescence, thereby expanding their potential applications. This study presents a general and effective approach for designing high-strength adhesives suitable for a wide array of uses.

Spectroscopic probing of ultraviolet-induced degradation in elastomeric polyurea

Aromatic polyurea has garnered assiduous research due to its excellent impact, shock, abrasion, moisture, and chemical resistance properties. Polyurea can be used in protective coating and impact mitigation applications but is inevitably exposed to harsh deployment conditions such as extended ultraviolet (UV) radiation. Fourier Transform Infrared (FTIR) spectroscopy, Terahertz-time domain spectroscopy (THz-TDS), and Excitation-Emission Matrix spectroscopy (EEMS) deciphered the effects of UV radiation on radiated polyurea samples under ambient and nitrogen-rich conditions. Samples were radiated continuously for up to 15 weeks in increments of 3 weeks. Comprehensive FTIR analyses revealed a monotonic increase in disordered hydrogen bonding as a function of exposure duration in an ambient environment. Otherwise, marginal changes were observed in UV-radiated samples under nitrogen. The hydrogen bond length exhibited significant variations in the former compared to their nitrogen atmosphere counterparts. The results infer the nitrogen shielding effect, protecting polyurea from the photodegradation and photo-oxidation observed in samples radiated under the ambient atmosphere. THz-TDS spectra affirmed the FTIR results by probing changes in the complex refractive index. Terahertz spectral peaks associated with torsional vibrations of intermolecular hydrogen bonds in polyurea were notably correlated with increased exposure duration in the ambient atmosphere. Changes in the complex index as a function of exposure duration under nitrogen are minimal. The excitation-emission spectra of polyurea samples reveal a strong fluorescent behavior in 9-week and 12-week ambient-exposed polyurea due to cluster-triggered emission mechanisms. The results synthesized based on three different spectroscopy techniques paint a holistic portrait of the adverse effects of extended ultraviolet radiation of macromolecules deployed in harsh environmental conditions.

Nonconventional Luminescent Piperazine-Containing Hyperbranched Polysiloxanes with Pure n-electron

Nonconventional luminogens with high quantum yield (QY) possess very potential applications in various fields. However, the preparation of such luminogens remains a great challenge. Herein, the first example of piperazine-containing hyperbranched polysiloxane exhibiting blue and green fluorescence is reported under the irradiation of different excitation wavelength and a high QY of 20.9%. The density functional theory (DFT) calculations and experimental results revealed that the through-space conjugation (TSC) within the clusters of N and O atoms is produced via the induction of multiple intermolecular hydrogen bonds and flexible SiO units, which is accountable for the fluorescence. Meanwhile, the introduction of the rigid piperazine units not only rigidifies the conformation, but also enhances the TSC. In addition, the fluorescence of both P1 and P2 shows concentration-, excitation-, and solvent-dependent emission, especially exhibits significant pH-dependent emission and obtains an ultrahigh QY of 82.6% at pH 5. The synthetic luminogens show excellent applications in fluorescence detection for Fe3+ and Co2+ , information encryption, and fluorescent film. This study provides a novel strategy to rationally design high-efficiency nonconventional luminogens.

Full Green Detection of Antibiotic Tetracyclines Using Fluorescent Poly(ethylene glycol) as the Sensor and the Mechanism Study

Tetracyclines are well-known antibiotics and widely used against a variety of bacterial infections. Their monitoring and detection have been an important issue. To this end, a vast number of methods have been developed; fluorescence sensing is one of the most reported. However, most of the reported sensors are made from transition metals with sophisticated multiprocesses; polymers are hardly seen for this purpose, particularly biocompatible ones. Herein, an aqueous solution of poly(ethylene glycol) (PEG), well known for being biocompatible, is shown to emit under excitation of 280 nm, while the solutions of selected tetracyclines, namely, doxycycline (DOX) and tetracycline (TC), are non-emissive under the same conditions. In the binary solutions of PEG-DOX or PEG-TC, PEG emission is sharply quenched with high sensitivity and selectivity. PEG was then used as a sensor for DOX and TC detections in water with high performance compared to reported studies. The same tests were also done by DOX spiking in milk and tap water, demonstrating that DOX was practically fully recovered. The quenching mechanism was ascribed to the interaction between the O atoms of PEG in clusters and specific heteroatom groups on tetracycline molecules through hydrogen bonding, elucidated from FTIR and NMR analyses. Therefore, this work provides a novel, fully green, easy to operate, low cost, and reliable protocol for tetracycline monitoring and detection and opens new potential application for PEG.

Structure-Dependent Nontraditional Intrinsic Fluorescence of Aliphatic Hyperbranched Polyureas

The nontraditional intrinsic fluorescence (NTIF) of polymers containing heteroatoms has gained considerable attention due to its promising applications in label-free bioimaging. Aliphatic hyperbranched polyureas (aBPUs), which have recently shown great promise in the field of nanomedicine, bear controllable urea groups distributed on the branch points and thus are potential candidate luminogens. However, their NTIF properties and how their structures influence the NTIF properties have not been illustrated yet. Here, we addressed these issues by synthesizing a series of aBPUs with different degrees of branching (DBs) or different modifications. aBPUs exhibited an obvious NTIF phenomenon and with the increase of DBs, the NTIF enhanced as well. Chemical modifications either at the branching ends or in the interior of aBPUs could affect the NTIF performances, which were highly dependent on the types of modification. Disruption of the intra-/intermolecular hydrogen-bonding interactions decreased the NTIF. In addition, poly(ethylene glycol) (PEG)-modified aBPUs could self-assemble into nanospheres, and the formation of nanoassembly led to 89% enhancement on NTIF compared with the homogeneous solution of aBPUs-PEG in dimethylformamide (DMF). Finally, aBPUs-PEG nanoassembly demonstrated a capability in realizing label-free material imaging in vitro. These results shed light on the rational design of the polymer structures to achieve desired fluorescence with unconventional luminophores.

Truly Multicolor Emissive Hyperbranched Polysiloxane: Synthesis, Mechanism Study, and Visualization of Controlled Drug Release

Unconventional fluorescent polymers have attracted increasing attention due to their facile synthesis, excellent biocompatibility, and novel photophysical properties. In this work, a truly multicolor emissive hyperbranched polysiloxane (HBPSi-β-CD) is obtained through adjusting the distribution of electron-rich atoms and grafting β-cyclodextrin; the quantum yields of HBPSi-β-CD after being excited by 360, 420, 450, and 550 nm are 19.36, 31.46, 46.14 and 44.84%, respectively. The density functional theory calculations reveal that the truly multicolor emission is derived from the formed electron delocalization among the hydroxyl, amine, ether, and -Si(O)₃ groups due to the strong intermolecular interaction, high density of electron-rich atoms, and low steric hindrance among functional groups. The prepared polymers could serve as a multisensitivity sensor in detecting Fe³⁺, Cu²⁺, and Co²⁺. The HBPSi-β-CD shows low cytotoxicity and excellent cellular imaging capability. The self-assembly of HBPSi-β-CD also possesses high drug loading capacity and pH-controlled drug release, especially, the drug delivery system could be applied in the visualization of controlled drug delivery.

Nonconventional luminophores: characteristics, advancements and perspectives

Nonconventional luminophores devoid of remarkable conjugates have attracted considerable attention due to their unique luminescence behaviors, updated luminescence mechanism of organics and promising applications in optoelectronic, biological and medical fields. Unlike classic luminogens consisting of molecular segments with greatly extended electron delocalization, these unorthodox luminophores generally possess nonconjugated structures based on subgroups such as ether (-O-), hydroxyl (-OH), halogens, carbonyl (CO), carboxyl (-COOH), cyano (CN), thioether (-S-), sulfoxide (SO), sulfone (OSO), phosphate, and aliphatic amine, as well as their grouped functionalities like amide, imide, anhydride and ureido. They can exhibit intriguing intrinsic luminescence, generally featuring concentration-enhanced emission, aggregation-induced emission, excitation-dependent luminescence and prevailing phosphorescence. Herein, we review the recent progress in exploring these nonconventional luminophores and discuss the current challenges and future perspectives. Notably, different mechanisms are reviewed and the clustering-triggered emission (CTE) mechanism is highlighted, which emphasizes the clustering of the above mentioned electron rich moieties and consequent electron delocalization along with conformation rigidification. The CTE mechanism seems widely applicable for diversified natural, synthetic and supramolecular systems.

Generating circularly polarized luminescence from clusterization-triggered emission using solid phase molecular self-assembly

Purely-organic clusterization-triggered emission (CTE) has displayed promising abilities in bioimaging, chemical sensing, and multicolor luminescence. However, it remains absent in the field of circularly polarized luminescence (CPL) due to the difficulties in well-aligning the nonconventional luminogens. We report a case of CPL generated with CTE using the solid phase molecular self-assembly (SPMSA) of poly-L-lysine (PLL) and oleate ion (OL), that is, the macroscopic CPL supramolecular film self-assembled by the electrostatic complex of PLL/OL under mechanical pressure. Well-defined interface charge distribution, given by lamellar mesophases of OL ions, forces the PLL chains to fold regularly as a requirement of optimal electrostatic interactions. Further facilitated by hydrogen bonding, the through-space conjugation (TSC) of orderly aligned electron-rich O and N atoms leads to CTE-based CPL, which is capable of transferring energy to an acceptor via a Förster resonance energy transfer (FRET) process, making it possible to develop environmentally friendly and economic CPL from sustainable and renewable materials.

Role of the Anilinium Ion on the Selective Polymerization of Anilinium 2-Acrylamide-2-methyl-1-propanesulfonate

The development of anilinium 2-acrylamide-2-methyl-1-propanesulfonate (Ani-AMPS) monomer, confirmed by ¹H NMR, ¹³C NMR, and FTIR, is systematically studied. Ani-AMPS contains two polymerizable functional groups, so it was submitted to selective polymerization either by free-radical or oxidative polymerization. Therefore, poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonic) [Poly(Ani-AMPS)] and polyaniline doped with 2-acrylamide-2-methyl-1-propanesulfonic acid [PAni-AMPS] can be obtained. First, the acrylamide polymer, poly(Ani-AMPS), favored the π-stacking of the anilinium group produced by the inter- and intra-molecular interactions and was studied utilizing ¹H NMR, ¹³C NMR, FTIR, and UV-Vis-NIR. Furthermore, poly(Ani-AMPS) fluorescence shows quenching in the presence of Fe²⁺ and Fe³⁺ in the emission spectrum at 347 nm. In contrast, the typical behavior of polyaniline is observed in the cyclic voltammetry analysis for PAni-AMPS. The optical properties also show a significant change at pH 4.4. The PAni-AMPS structure was corroborated through FTIR, while the thermal properties and morphology were analyzed utilizing TGA, DSC (except PAni-AMPS), and FESEM.

Facile and scalable design of light-emitting and ROS-generating hybrid materials made of polyurea gels embedding a molybdenum cluster-based salt

Here, we demonstrate a facile and scalable preparation via sol-gel chemistry of hybrid polyurea gels containing various amounts of a phosphorescent inorganic octahedral molybdenum cluster-based ternary salt, namely Cs2Mo6Br14. The influence of the Cs2Mo6Br14 content (1-10 wt%) on the polyurea matrix and its physical properties are studied in depth by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and X-ray fluorescence microanalysis (μ-XRF). Regardless of the amount of cluster loaded into the polyurea, the integrity of these species was preserved and their dispersion is homogeneous as shown by μ-XRF mapping. Spectroscopic-structural analyses reveal a significant increase of the chain mobility (glass transition temperature Tg) from -65 °C to -55 °C after the incorporation of Cs2Mo6Br14 (DSC analyses). The FTIR studies show that the homogeneity of the dispersion is ensured by supramolecular interactions between the ether-type oxygen atoms of the PEO chains and the cluster compound. Photoluminescence studies show that the metal cluster emission properties are well retained within the host matrix whatever the loaded content. Such a combination of materials demonstrates the feasibility to fabricate a rubber NIR-emitting device. Moreover, the loaded polyurea is also able to produce reactive oxygen species (ROS) upon irradiation in the UV-A region, opening new perspectives as versatile membranes in the field of photodynamic therapy.

A Fluorescent Polyurethane with Covalently Cross-Linked Rhodamine Derivatives

Rhodamine derivatives (RDs) with three reactive hydrogens were synthesized and well characterized by Fourier transform infra-red spectroscopy (FTIR), 1H nuclear magnetic resonance (1H NMR) and electrospray ionization mass spectra (ESI mass). Then, the obtained RD was covalently cross-linked into polyurethane (PU) matrix through chemical linkages to fabricate a network structure, and the fluorescent properties, mechanical properties, thermal stability, and emulsion particle size were systematically investigated. Results demonstrate that PU-RD maintains initial fluorescent properties and emits desirable yellow fluorescence under ultraviolet irradiation. Moreover, compared with linear PU without fluorescers, PU-RD shows clearly improved mechanical properties and thermal stability, on account of the formed network structures.