Make it clean, make it safe: A review on virus elimination via adsorption

Boosting virus enrichment with macroporous magnetic sorbent based on ketoenamine covalent organic framework

Effective surveillance and discovery of emerging and reemerging infectious viruses are crucial for predicting and controlling epidemic outbreaks. However, these efforts are significantly hindered by the low-titer existence of genetically diverse viruses in most field samples. Here, we report a macroporous-structured magnetic sorbent based on β-ketoenamine covalent organic framework (COF). Leveraging the combined advantages of the chemical and nanotopographical properties of the COF surface, along with the high accessibility of this active surface within the macroporous matrix, the COF-based adsorbent demonstrates enrichment capabilities for a wide range of viruses with varying structural features. These include Tick-borne encephalitis virus, Influenza virus H9N2 subtype, Severe acute respiratory syndrome coronavirus-2, Herpes simplex virus, Japanese encephalitis virus, Adeno virus, Bacteriophage MS2 and Enterovirus 71, achieving an enrichment efficiency exceeding 80 %. Notably, the COF-based sorbent enables a remarkable 9-fold reduction in the threshold concentration required for virus detection via quantitative polymerase chain reaction, demonstrating its immense potential for early virus detection and discovery.

Polycyclic aromatic polymer nanoparticles show potent infectious particle adsorption capability

Nonspecific viral adsorption by polymer nanoparticles is more economical and superior in terms of operating cost and energy efficiency than viral adsorption using virus-specific antibodies and filtration techniques involving size exclusion in the order of tens of nanometres. In this study, we synthesised four types of polycyclic aromatic polymer (ArP) nanoparticles with different structures and evaluated their virus adsorption capability for infectious particles of the newly emerged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). ArP nanoparticles with a diameter of approximately 500 nm were prepared by one-pot precipitation polymerisation using structural isomers of bifunctional dihydroxynaphthalene (1,5-dihydroxynaphthalene and 2,6-dihydroxynaphthalene) as phenol monomers, as well as 3-hydroxybenzoic acid and 3-aminophenol as comonomers to introduce carboxylic acid and amino groups, respectively. This wide range of phenolic monomers offers a powerful molecular design capability, enabling the optimisation of surface properties for the adsorption of various infectious virus particles. The virus adsorption capacity of the ArP nanoparticles exceeded 20 000 plaque-forming units and was found to be correlated with the nitrogen (primary and secondary amines) and quinone contents on the ArP nanoparticle surface. Furthermore, a polyvinylidene difluoride membrane filter uniformly coated with the ArP nanoparticles could remove viruses by filtration in a flow system.

Hospital-borne hazardous air pollutants and air cleaning strategies amid the surge of SARS-CoV-2 new variants

Indoor air pollutants and airborne contamination removal have been challenging in healthcare facilities. The airborne transmission control and HVAC system may collapse in hospitals due to the highly infectious respiratory disease-associated patient surge, like COVID-19. Common air filtration systems and HVAC systems enhance the patients' comfort and support indoor hygiene, hitherto insufficient to control highly infectious airborne pathogens and hospital-borne pollutants such as radon, PM2.5, patient droplets, VOC, high CO2, and anesthetic gases. This review summarized important air cleaning interventions to enhance HVAC efficiency and indoor safety. We discussed efficient air cleaning and ventilation strategies including air filtration, air ionization, passive removal materials (PRM), and UVGI to minimize cross-contamination in hospital wards.

Cellulose acetate/metal-organic framework composite beads with macroporous adsorption channels as a novel hemoadsorbent for effective virus capture

Due to their rapid spread, high variability, and drug-resistant strains, new viral infections are continuously emerging. A lack of effective antiviral drugs and vaccines, resulting in disease and death, has significant socioeconomic consequences. Hemoperfusion can effectively adsorb and remove toxins from the blood, thus purifying the blood and serving as an acute treatment. Therefore, the aim of this study was to construct adsorbents to selectively remove viruses from the blood to quickly treat pathogen infection. We reported on new metal-organic framework (MOF)-polymer beads based on MIL-53(Al) and cellulose acetate (CNC), which were prepared by a one-step phase inversion method and applied as a viral hemo-adsorbent for the first time. The characterization results demonstrated that MIL-53(Al) was well dispersed in the CNC matrix. The adsorption results demonstrated that the capture efficiency of the human immunodeficiency virus (HIV) could exceed 99.93%, and the corresponding infectious titer decreased by approximately 103 times in clinical application. Moreover, CNC/MIL-53 exhibited low hemolysis ratios and good anticoagulant properties. Furthermore, molecular dynamics simulations revealed that the interplay of hydrogen bonding was the governing physisorption mechanism. Overall, CNC/MIL-53 could serve as a new type of hemoperfusion adsorbent for virus removal from blood and provide a new treatment pathway to mitigate epidemics.

Plastisphere-hosted viruses: A review of interactions, behavior, and effects

Microbial communities, including bacteria, diatoms, and fungi, colonize plastic surfaces, forming biofilms known as the "plastisphere." Recent research has revealed that plastispheres also host a wide range of viruses, sparking interest in microbial ecology and virology. This shared habitat allows viruses to replicate, interact, infect, and spread, potentially impacting the environment and human health. Consequently, viruses attached to microplastics are now recognized to have broad effects on cellular and immune responses. However, the ecology and implications of viruses hosted in plastisphere habitats remain poorly understood, highlighting their fundamental importance as a subject of study. This review explores various pathways for virus attachment to plastispheres, factors influencing these interactions, their impacts within plastisphere and host-associated environments, and associated issues. It also summarizes current research and identifies knowledge gaps. We anticipate that this paper will help improve our predictive understanding of plastisphere viruses in natural settings and emphasizes the need for more research in real-world environments to advance the field.

Central Countries' and Brazil's Contributions to Nanotechnology

Abstract:

Nanotechnology is a cornerstone of the scientific advances witnessed over the past few years. Nanotechnology applications are extensively broad, and an overview of the main trends worldwide can give an insight into the most researched areas and gaps to be covered. This document presents an overview of the trend topics of the three leading countries studying in this area, as well as Brazil for comparison. The data mining was made from the Scopus database and analyzed using the VOSviewer and Voyant Tools software. More than 44.000 indexed articles published from 2010 to 2020 revealed that the countries responsible for the highest number of published articles are The United States, China, and India, while Brazil is in the fifteenth position. Thematic global networks revealed that the standing-out research topics are health science, energy, wastewater treatment, and electronics. In a temporal observation, the primary topics of research are: India (2020), which was devoted to facing SARS-COV 2; Brazil (2019), which is developing promising strategies to combat cancer; China (2018), whit research on nanomedicine and triboelectric nanogenerators; the United States (2017) and the Global tendencies (2018) are also related to the development of triboelectric nanogenerators. The collected data are available on GitHub. This study demonstrates the innovative use of data-mining technologies to gain a comprehensive understanding of nanotechnology's contributions and trends and highlights the diverse priorities of nations in this cutting-edge field.

Innovative DIY drinking water disinfection for underserved communities

Waterborne pathogens threaten 2.2 billion people lacking access to safely managed drinking water services, causing over a million annual diarrheal deaths. Individuals without access to chlorine reagents or filtration devices often resort to do-it-yourself (DIY) methods, such as boiling or solar disinfection (SODIS). However, these methods are not simple to implement. In this study, we introduced an innovative and easily implemented disinfection approach. We discovered that immersing aluminum foil in various alkaline solutions produces alkali-treated aluminum foil (ATA foil) that effectively adsorbs Escherichia coli (E. coli), Salmonella, and Acinetobacter through the generated surface aluminum hydroxide. For example, a 25 cm2 ATA foil efficiently captures all 104E. coli DH5α strains in 100 mL water within 30 min. Using a saturated suspension of magnesium hydroxide, a type of fertilizer, as the alkaline solution, the properties of the saturated suspension eliminate the need for measuring reagents or changing solutions, making it easy for anyone to create ATA foil. ATA foils can be conveniently produced within mesh bags and placed in household water containers, reducing the risk of recontamination. Replacing the ATA foil with a foil improves the adsorption efficiency, and re-immersing the used foil in the production suspension restores its adsorption capacity. Consequently, ATA foil is an accessible and user-friendly alternative DIY method for underserved communities. Verification experiments covering variations in the water quality and climate are crucial for validating the efficacy of the foil. Fortunately, the ATA foil, with DIY characteristics similar to those of boiling and SODIS, is well-suited for testing under diverse global conditions, offering a promising solution for addressing waterborne pathogens worldwide.

Recent advances in designing and developing efficient sillenite-based materials for photocatalytic applications

Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.

Insights of phytoremediation mechanisms for viruses based on in-vitro, in-vivo and in-silico assessments of selected herbal plants

Waterborne pathogenic viruses present unrelenting challenges to the global health and wastewater treatment industry. Phytoremediation offers promising solutions for wastewater treatment through plant-based technologies. This study investigated antiviral mechanisms in-vivo using bacteriophages MS2 and T4 as surrogates for effective herbs screened in-vitro from three embryophytes (Ocimum basilicum, Mentha sp., Plectranthus amboinicus), two macrophytes (Eichhornia crassipes, Pistia stratiotes) and a perennial grass (Cyperus rotundas). In-silico virtual screening predicted antiviral phytochemicals for further antiviral potency assessment. Results suggested in-vitro antiviral activities of embryophytes and macrophytes were higher (43-62%) than grass (21-26%). O. basilicum (OB, 57-62%) and P. stratiotes (PS, 59-60%) exhibited the highest antiviral activities. In-vivo tests showed notable virus reduction (>60%) in culture solution, attributed to rhizofiltration (66-74%) and phytoinactivation/phytodegradation (63-84%). In-silico analysis identified rutin as a primary antiviral phytochemical for MS2 (-9.7 kcal/mol) and T4 (-10.9 kcal/mol), correlating with dose-response inactivation (∼58-62%). In-vivo tests suggested additional phytocompounds may contribute to viral inactivation, presenting new opportunities for herb-based wastewater treatment solutions. Consequently, this study not only demonstrates the antiviral capabilities of OB and PS but also introduces an innovative approach for addressing viral contaminants in water.

Inactivation of airborne pathogenic microorganisms by plasma-activated nebulized mist

The airborne microorganisms in the aerosols are one main transmission way of pathogenic microorganisms and therefore inactivation of microorganisms in aerosols could effectively prevent the transmission of pathogenic microorganisms to control epidemics. The mist nebulized by plasma-activated air could effectively inactivate bacteria and could be developed for the sterilization of microorganisms in aerosols. In this study, the plasma-activated nebulized mist (PANM) was applied for the inactivation of microorganisms in aerosols and efficiently inactivated the bacteria, yeast, and viruses in aerosols after 2-min treatment. The PANM treatment caused morphologic changes and damage to the bacteria cells in aerosols. The PANM could also inactivate the microorganisms attached to the surface of the treatment chamber and the bacteria attached to the skin of mice within 6-min treatment. The biosafety assays demonstrated that the PANM treatment exhibited no effects on the behavior, hematological and serum biochemical parameters of blood, and organs from the mice. This study would supply an efficient, broad-spectrum, and safe aerosol sterilization strategy based on plasma technology to prevent the transmission of airborne microorganisms.

Passive Sampler Technology for Viral Detection in Wastewater-Based Surveillance: Current State and Nanomaterial Opportunities

Although wastewater-based surveillance (WBS) is an efficient community-wide surveillance tool, its implementation for pathogen surveillance remains limited by ineffective sample treatment procedures, as the complex composition of wastewater often interferes with biomarker recovery. Moreover, current sampling protocols based on grab samples are susceptible to fluctuant biomarker concentrations and may increase operative costs, often rendering such systems inaccessible to communities in low-to-middle-income countries (LMICs). As a response, passive samplers have emerged as a way to make wastewater sampling more efficient and obtain more reliable, consistent data. Therefore, this study aims to review recent developments in passive sampling technologies to provide researchers with the tools to develop novel passive sampling strategies. Although promising advances in the development of nanostructured passive samplers have been reported, optimization remains a significant area of opportunity for researchers in the area, as methods for flexible, robust adsorption and recovery of viral genetic materials would greatly improve the efficacy of WBS systems while making them more accessible for communities worldwide.

Aero-manufacture of nanobulges for an in-place anticoronaviral on air filters

The interest in removing contagious viruses from indoor air using ventilation and filtration systems is increasing rapidly because people spend most of the day indoors. The development of an effective platform to regenerate the antiviral function of air filters during use and safe abrogation of used filters containing infectious viruses is a challenging task, because an on-demand safe-by-design manufacture system is essential for in-place antiviral coatings, but it has been rarely investigated. With these considerations, an electrically operable dispenser was prepared for decorating continuous ultrafine Fe-Zn, Fe-Ag, or Fe-Cu particles (<5 nm) onto SiO₂ nanobeads (ca. 130 nm) to form nanobulges (i.e., nanoroughness for engaging coronavirus spikes) in the aerosol state for 3 min direct deposition on the air filter surfaces. The resulting nanobulges were exposed to human coronaviruses (HCoV; surrogates of SARS-CoV-2) to assess antiviral function. The results were compared with similar-sized individual Zn, Ag, and Cu particles. The nanobulges exhibited comparable antiviral activity to Zn, Ag, and Cu particles while retaining biosafety in both in vitro and in vivo models because of the significantly smaller metallic fractions. This suggests that the bimetallic bulge structures generate reactive oxygen species and Fenton-mediated hydroxyl radicals for inactivating HCoV.

Synthesis of hybrid framework of tenorite and octahedrally coordinated aluminosilicate for the robust adsorption of cationic and anionic dyes

Adsorption is an important process for the industrial dye effluent treatment. Many adsorbents are employed such as activated carbon, metal oxide, molecular sieves etc. All those adsorbents are having their own setbacks like longer adsorption time and lower adsorption capacity. So development of fast adsorption and higher adsorption capacity is very much essential. In this view, we synthesized hybrid crystal system of tenorite and aluminosilicate framework (CuO@AS) for the faster adsorption. It is characterized by FT-IR, HRTEM and WAXRD. WAXRD proved the hybridization of two crystal systems viz tenorite & alumina in monoclinic phase and silica in trigonal phase. The crystal structure drawn based on the WAXRD data. It is observed that the tenorite and aluminosilicate framework are separate, but they are interlinked through Cu-O-Al and Cu-O-Si bond. This interconnection makes the aluminium in six coordination and Cu in four coordination. Aluminium and copper has 3 and 2 Brønsted acid sites respectively. Moreover, copper has three more OH group, so totally 5 H⁺ and 3 OH^- sites in copper and aluminium are responsible for the faster adsorption with high adsorption capacity compared to reported literature. To test the adsorption tendency, Victoria Blue (VB) and Metanil Yellow (MY) dyes are employed at room temperature. The rate constant of Pseudo-second order kinetics for the VB and MY are 0.002462 g mg^-1 min^-1 and 0.001619 g mg^-1 min^-1 which indicated faster adsorption of VB than MY. Moreover, total adsorption capacity for VB (636 mg/g) is higher than MY (52 mg/g). This is due to the hybridization of tenorite and aluminosilicate. Thermodynamic data such as ΔG°, ΔH° and ΔS° revealed that the adsorption is spontaneous, chemisorption and highly disordered in the adsorbent-adsorbate interface. This disorderness is due to the disordered pores present in the material.

A Roadmap for Building Waterborne Virus Traps

Outbreaks of waterborne viruses pose a massive threat to human health, claiming the lives of hundreds of thousands of people every year. Adsorption-based filtration offers a promising facile and environmentally friendly approach to help provide safe drinking water to a world population of almost 8 billion people, particularly in communities that lack the infrastructure for large-scale facilities. The search for a material that can effectively trap viruses has been mainly driven by a top-down approach, in which old and new materials have been tested for this purpose. Despite substantial advances, finding a material that achieves this crucial goal and meets all associated challenges remains elusive. We suggest that the road forward should strongly rely on a complementary bottom-up approach based on our fundamental understanding of virus interactions at interfaces. We review the state-of-the-art physicochemical knowledge of the forces that drive the adsorption of viruses at solid-water interfaces. Compared to other nanometric colloids, viruses have heterogeneous surface chemistry and diverse morphologies. We advocate that advancing our understanding of virus interactions would require describing their physicochemical properties using novel descriptors that reflect their heterogeneity and diversity. Several other related topics are also addressed, including the effect of coadsorbates on virus adsorption, virus inactivation at interfaces, and experimental considerations to ensure well-grounded research results. We finally conclude with selected examples of materials that made notable advances in the field.

Recent advances in aqueous virus removal technologies

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses challenges of combining biochemical, membrane and disinfection processes for synergistic treatment of viruses in order to reduce the dissemination of waterborne diseases. Certainly, the combination technologies are proactive in minimizing and restraining the outbreaks of the virus. It emphasizes the importance of health authorities to confront the outbreaks of unknown viruses in the future.

Antiviral Effects of Heparan Sulfate Analogue‐Modified Two‐Dimensional MXene Nanocomposites on PRRSV and SARS‐CoV‐2

Due to the worldwide impact of viruses such as SARS‐CoV‐2, researchers have paid extensive attention to antiviral reagents against viruses. Despite extensive research on two‐dimensional (2D) transition metal carbides (MXenes) in the field of biomaterials, their antiviral effects have received little attention. In this work, heparan sulfate analogue (sodium 3‐mercapto‐1‐propanesulfonate, MPS) modified 2D MXene nanocomposites (Ti₃C₂‐Au‐MPS) for prevention of viral infection are prepared and investigated using severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) pseudovirus and porcine reproductive and respiratory syndrome virus (PRRSV) as two model viruses. Ti₃C₂‐Au‐MPS nanocomposites are shown to possess antiviral properties in the different stages of PRRSV proliferation, such as direct interaction with PRRS virions and inhibiting their adsorption and penetration in the host cell. Additionally, Ti₃C₂‐Au‐MPS nanocomposites can strongly inhibit the infection of SARS‐CoV‐2 pseudovirus as shown by the contents of its reporter gene GFP and luciferase. These results demonstrate the potential broad‐spectrum antiviral property of Ti₃C₂‐Au‐MPS nanocomposites against viruses with the receptor of heparin sulfate. This work sheds light on the specific antiviral effects of MXene‐based nanocomposites against viruses and may facilitate further exploration of their antiviral applications.

Disinfection of corona and myriad viruses in water by non-thermal plasma: a review

Nowadays, in parallel to the appearance of the COVID-19 virus, the risk of viruses in water increases leading to the necessity of developing novel disinfection methods. This review focuses on the route of virus contamination in water and introduces non-thermal plasma technology as a promising method for the inactivation of viruses. Effects of essential parameters affecting the non-thermal discharge for viral inactivation have been exposed. The review has also illustrated a critical discussion of this technology with other advanced oxidation processes. Additionally, the inactivation mechanisms have also been detailed based on reactive oxygen and nitrogen species.

Multifunctional π-Conjugated Additives for Halide Perovskite

Additive is a conventional way to enhance halide perovskite active layer performance in multiaspects. Among them, π-conjugated molecules have significantly special influence on halide perovskite due to the superior electrical conductivity, rigidity property, and good planarity of π-electrons. In particular, π-conjugated additives usually have stronger interaction with halide perovskites. Therefore, they help with higher charge mobility and longer device lifetime compared with alkyl-based molecules. In this review, the detailed effect of conjugated molecules is discussed in the following parts: defect passivation, lattice orientation guidance, crystallization assistance, energy level rearrangement, and stability improvement. Meanwhile, the roles of conjugated ligands played in low-dimensional perovskite devices are summarized. This review gives an in-depth discussion about how conjugated molecules interact with halide perovskites, which may help understand the improved performance mechanism of perovskite device with π-conjugated additives. It is expected that π-conjugated organic additives for halide perovskites can provide unprecedented opportunities for the future improvement of perovskite devices.

Removal of MS2 and fr Bacteriophages Using MgAl2O4-Modified, Al2O3-Stabilized Porous Ceramic Granules for Drinking Water Treatment

Point-of-use ceramic filters are one of the strategies to address problems associated with waterborne diseases to remove harmful microorganisms in water sources prior to its consumption. In this study, development of adsorption-based ceramic depth filters composed of alumina platelets was achieved using spray granulation (calcined at 800 °C). Their virus retention performance was assessed using cartridges containing granular material (4 g) with two virus surrogates: MS2 and fr bacteriophages. Both materials showed complete removal, with a 7 log10 reduction value (LRV) of MS2 up to 1 L. MgAl2O4-modified Al2O3 granules possessed a higher MS2 retention capacity, contrary to the shortcomings of retention limits in pure Al2O3 granules. No significant decline in the retention of fr occurred during filtration tests up to 2 L. The phase composition and morphology of the materials were preserved during filtration, with no magnesium or aluminum leakage during filtration, as confirmed by X-ray diffractograms, electron micrographs, and inductively coupled plasma-optical emission spectrometry. The proposed MgAl2O4-modified Al2O3 granular ceramic filter materials offer high virus retention, achieving the criterion for virus filtration as required by the World Health Organization (LRV ≥ 4). Owing to their high thermal and chemical stability, the developed materials are thus suitable for thermal and chemical-free regeneration treatments.

Nanoparticle and bioparticle deposition kinetics

Mechanisms and kinetic of particle deposition at solid surfaces leading to the formation of self-assembled layers of controlled structure and density were reviewed. In the first part theoretical aspects were briefly discussed, comprising limiting analytical solutions for the linear transport under flow and diffusion. Methods of the deposition kinetics analysis for non-linear regimes affected by surface blocking were also considered. Characteristic monolayer formation times under diffusion and flow for the nanoparticle size range were calculated. In the second part illustrative experimental results obtained for micro- and nanoparticles were discussed. Deposition at planar substrates was analyzed with emphasis focused on the stability of layers and the release kinetics of silver particles. Applicability of the quartz microbalance measurements (QCM) for quantitative studies of nanoparticle deposition kinetic was also discussed. Except for noble metal and polymer particles, representative results for virus deposition at abiotic surfaces were analyzed. Final part of the review was devoted to nanoparticle corona formation at polymer carrier particles investigated by combination of the concentration depletion, AFM, SEM and the in situ electrokinetic method. It is argued that the results obtained for colloid particles can be used as reliable reference systems for interpretation of protein and other bioparticle deposition, confirming the thesis that simple is universal.

Application fields of kitchen waste biochar and its prospects as catalytic material: A review

In China, a large amount of kitchen waste (KW) is generated each year, and the resource utilisation of the KW has become a problem. KW has a high carbon content and can be used as a raw material for biochar. Kitchen waste biochar (KWB) can be used to prepare adsorption materials, soil amendments, energy materials, carbon quantum dots, and electrode materials. However, few studies have used KWB as a raw material for catalytic materials. The application of sulfur (S) and nitrogen (N) doped biochar in the field of catalysis has proved effective and feasible. KWB contained a certain mass percentage of N and S elements, which has good application potential for use in the field of catalysis by KWB. In the process of preparing KWB by KW, keeping S and N as much as possible and converting them into pyridine N and thiophene S benefit the application of catalysis. This review provides a reference for the future application of KWB in China.

Fate and Transportation of Viruses from Reclaimed Water into a Floatation System

The fate and transport of viruses in floatation systems is considerably important for accurate determination of the safety of reusing reclaimed water in the flotation process. Herein, simulation experiments on the floatation, adsorption and desorption were performed to examine the effect of initial virus concentration, pH and floatation reagents on the adsorption of viruses ΦΧ174 and MS2 onto copper–molybdenum ores. The transport of viruses in the flotation systems was also investigated. The viruses in the reclaimed water were rapidly adsorbed onto the ore particles, suggesting that tailing wastewater can be safely reused for floatation. However, the adsorbed viruses in the concentrates, middlings and tailings may pose health risks at certain exposure levels. The transport of viruses was dominated by their attachment to ore particles, with most being inactivated or irreversibly adsorbed. The removal and adsorption rates decreased as the initial virus concentration increased, and the removal rate decreased as pH was increased from 7.5 to 9.5. In comparison with MS2, ΦΧ174 was removed more effectively. This suggested that electrostatic repulsion is an important mechanism because MS2 has a greater negative charge. The attachment of both ΦΧ174 and MS2 onto the mineral particles increased significantly in the presence of PJ053 and CaO.

Metal–organic-framework-based photocatalysts for microorganism inactivation: a review

A metal–organic framework (MOF) is a porous coordination material composed of multidentate organic ligands and metal ions or metal clusters.

SARS-CoV-2 virion physicochemical characteristics pertinent to abiotic substrate attachment

The structure, size, and main physicochemical characteristics of the SARS-CoV-2 virion with the spike transmembrane protein corona were discussed. Using these data, diffusion coefficients of the virion in aqueous media and in air were calculated. The structure and dimensions of the spike protein derived from molecular dynamic modeling and thorough cryo-electron microscopy measurements were also analyzed. The charge distribution over the molecule was calculated and shown to be largely heterogeneous. Although the stalk part is negatively charged, the top part of the spike molecule, especially the receptor binding domain, remains positively charged for a broad range of pH. It is underlined that such a charge distribution promotes the spike corona stability and enhances the virion attachment to receptors and surfaces, mostly negatively charged. The review is completed by the analysis of experimental data pertinent to the spike protein adsorption at abiotic surfaces comprising nanoparticle carrier particles. It is argued that these theoretical and experimental data can be used for developing quantitative models of virus attachment to surfaces, facilitating adequate analysis of future experimental results.