Toxicity of tetramethylammonium hydroxide to aquatic organisms and its synergistic action with potassium iodide

Neurotoxicity of tetramethylammonium ion on larval and juvenile zebrafish: Effects on neurobehaviors and multiple biomarkers

Tetramethylammonium hydroxide (TMAH) is an important compound that utilized and released by the rapidly expanding semiconductor industry, which could hardly be removed by the conventional wastewater treatment techniques. As a cholinergic agonist, the tetramethylammonium ion (TMA+) has been reported to induce toxicity to muscular and respiratory systems of mammals and human, however the toxicity on aquatic biota remains poorly known. We investigated the neurotoxic effects of TMA+ exposure on zebrafish, based on neurobehavior tests and a series of biomarkers. Significant inhibitions on the swimming distance of zebrafish larvae were observed when the exposure level exceeded 50 mg/L, and significant alterations on swimming path angles (straight and deflective movements) occurred even at 10 mg/L. The tested neurobehavioral endpoints of zebrafish larvae were significantly positively correlated with reactive oxygen species (ROS) and malondialdehyde (MDA), significantly negatively related with the activities of antioxidant enzymes, but not significantly correlated with the level of acetylcholinesterase (AChE). Such relationship indicates that the observed neurotoxic effects on swimming behavior of zebrafish larvae is mainly driven by oxidative stress, rather than the alterations of neurotransmitter. At the highest exposure concentration (200 mg/L), TMA+ evoked more severe toxicity on zebrafish juveniles, showing significantly stronger elevation on the MDA activity, and greater inhibitions on the activities of antioxidant enzymes and AChE, suggesting juveniles were more susceptible to TMA+ exposure than larval zebrafish.

Tetraalkylammonium salts (TAS) in solar energy applications - A review on in vitro and in vivo toxicity

Tetraalkylammonium salt (TAS) is an organic salt widely employed as a precursor, additive or electrolyte in solar cell applications, such as perovskite or dye-sensitized solar cells. Notably, Perovskite solar cells (PSCs) have garnered acclaim for their exceptional efficiency. However, PSCs have been associated with environmental and health concerns due to the presence of lead (Pb) content, the use of hazardous solvents, and the incorporation of TAS in their fabrication processes, which significantly contributes to environmental and human health toxicity. As a response, there is a growing trend towards transitioning to safer and biobased materials in PSC fabrication to address these concerns. However, the potential health hazards associated with TAS necessitate a thorough evaluation, considering the widespread use of this substance. Nevertheless, the overexploitation of TAS could potentially increase the disposal of TAS in the ecosystem, thus, posing a major health risk and severe pollution. Therefore, this review article presents a comprehensive discussion on the in vitro and in vivo toxicity assays of TAS as a potential material in solar energy applications, including cytotoxicity, genotoxicity, in vivo dermal, and systemic toxicity. In addition, this review emphasizes the toxicity of TAS compounds, particularly the linear tetraalkyl chain structures, and summarizes essential findings from past studies as a point of reference for the development of non-toxic and environmentally friendly TAS derivatives in future studies. The effects of the TAS alkyl chain length, polar head and hydrophobicity, cation and anion, and other properties are also included in this review.

Research on carbon and nitrogen removal of tetramethylammonium hydroxide containing wastewater by combined anaerobic/integrated fixed film activated sludge process

Tetramethylammonium hydroxide (TMAH) is widely used as a developer and etchant in the thin-film transistor liquid crystal display industry, which is the main component of developer wastewater with low C/N ratio. This study investigated TMAH degradation by combined anaerobic/integrated fixed film activated sludge (A/IFAS) process, especially for nitrogen removal. Effects of process condition on the TMAH degradation were studied, including dissolved oxygen concentration in IFAS reactor and the temperature of anaerobic reactor. Especially, the nitrogen removal was studied through the monitoring of intermediate products during TMAH biodegradation. The results indicated that lower the anaerobic treatment temperature can provide more available organic matters to enhance the denitrification in the subsequent IFAS reactor. Less oxygen supply in the IFAS reactor contributed to simultaneous nitrification and denitrification. Removal efficiency of total organic carbon and total nitrogen was up to 95.8% and 80.7%, when the temperature of anaerobic treatment was controlled at 30 °C with the DO kept at 0.7 mg/L. It indicated that A/IFAS process was efficient in carbon and nitrogen removal for TMAH degradation. The results also confirmed intermediate products of TMAH biodegradation can be used as the electron donor during denitrification, including trimethylamine, dimethylamine and methylamine. Illumina MiSeq sequencing showed that Proteobacteria was the dominant phylum contribute to nitrogen removal. Compared to sludge flocs in IFAS reactor, richer community and higher microbial diversity were observed in the biofilm.

Anaerobic hydrolysis of recalcitrant tetramethylammonium from semiconductor wastewater: Performance and mechanisms

The treatment of tetramethylammonium hydroxide (TMAH)-bearing wastewater, generated in the electronic and semiconductor industries, raises significant concerns due to the neurotoxic, recalcitrant, and bio-inhibiting effects of TMAH. In this study, we proposed the use of an anaerobic hydrolysis bioreactor (AHBR) for TMAH removal, achieving a high removal efficiency of approximately 85%, which greatly surpassed the performance of widely-used advanced oxidation processes (AOPs). Density functional theory calculations indicated that the unexpectedly poor efficiency (5.8-8.0%) of selected AOPs can be attributed to the electrostatic repulsion between oxidants and the tightly bound electrons of TMAH. Metagenomic analyses of the AHBR revealed that Proteobacteria and Euryarchaeota played a dominant role in the transformation of TMAH through processes such as methyl transfer, methanogenesis, and acetyl-coenzyme A synthesis, utilizing methyl-tetrahydromethanopterin as a substrate. Moreover, several potential functional genes (e.g., mprF, basS, bcrB, sugE) related to TMAH resistance have been identified. Molecular docking studies between five selected proteins and tetramethylammonium further provided evidence supporting the roles of these potential functional genes. This study demonstrates the superiority of AHBR as a pretreatment technology compared to several widely-researched AOPs, paving the way for the proper design of treatment processes to abate TMAH in semiconductor wastewater.

Isolation and physiological properties of methanogenic archaea that degrade tetramethylammonium hydroxide

Tetramethylammonium hydroxide (TMAH) is a known toxic chemical used in the photolithography process of semiconductor photoelectronic processes. Significant amounts of wastewater containing TMAH are discharged from electronic industries. It is therefore attractive to apply anaerobic treatment to industrial wastewater containing TMAH. In this study, a novel TMAH-degrading methanogenic archaeon was isolated from the granular sludge of a psychrophilic upflow anaerobic sludge blanket (UASB) reactor treating synthetic wastewater containing TMAH. Although the isolate (strain NY-STAYD) was phylogenetically related to Methanomethylovorans uponensis, it was the only isolated Methanomethylovorans strain capable of TMAH degradation. Strain NY-STAYD was capable of degrading methylamine compounds, similar to the previously isolated Methanomethylovorans spp. While the strain was able to grow at temperatures ranging from 15 to 37°C, the cell yield was higher at lower temperatures. The distribution of archaeal cells affiliated with the genus Methanomethylovorans in the original granular sludge was investigated by fluorescence in situ hybridization (FISH) using specific oligonucleotide probe targeting 16S rRNA. The results demonstrated that the TMAH-degrading cells associated with the genus Methanomethylovorans were not intermingled with other microorganisms but rather isolated on the granule's surface as a lone dominant archaeon. KEY POINTS: • A TMAH-degrading methanogenic Methanomethylovorans strain was isolated • This strain was the only known Methanomethylovorans isolate that can degrade TMAH • The highest cell yield of the isolate was obtained at psychrophilic conditions.

Treatment of Semiconductor Wastewater Containing Tetramethylammonium Hydroxide (TMAH) Using Nanofiltration, Reverse Osmosis, and Membrane Capacitive Deionization

As the semiconductor industry has grown tremendously over the last decades, its environmental impact has become a growing concern, including the withdrawal of fresh water and the generation of harmful wastewater. Tetramethylammonium hydroxide (TMAH), one of the toxic compounds inevitably found in semiconductor wastewater, should be removed before the wastewater is discharged. However, there are few affordable technologies available to remove TMAH from semiconductor wastewater. Therefore, the objective of this study was to compare different treatment options, such as Membrane Capacitive Deionization (MCDI), Reverse Osmosis (RO), and Nanofiltration (NF), for the treatment of semiconductor wastewater containing TMAH. A series of bench-scale experimental setups were conducted to investigate the removal efficiencies of TMAH, TDS, and TOC. The results confirmed that the MCDI process showed its great ability as well as RO to remove them, while the NF could not make a sufficient removal under identical recovery conditions. MCDI showed higher removals of monovalent ions, including TMA+, than divalent ions. Moreover, the removal of TMA+ by MCDI was higher under the basic solution than under both neutral and acidic conditions. These results were the first to demonstrate that MCDI has significant potential for treating semiconductor wastewater that contains TMAH.

Quorum quenching bacteria isolated from industrial wastewater sludge to control membrane biofouling

N-acylhomoserine lactone (AHL)-based bacterial communication through quorum sensing (QS) is one of the main causes of biofouling. Although quorum quenching (QQ) has proven to be an effective strategy against biofouling in membrane bioreactors (MBRs) for municipal wastewater treatment, its applicability for industrial wastewater treatment has rarely been studied. This is the first study to isolate QQ strains from the activated sludge used to treat industrial wastewater containing toxic tetramethylammonium hydroxide (TMAH) and 1-methyl-2-pyrrolidinone. The two QQ strains from genus Bacillus (SDC-U1 and SDC-A8) survived and effectively degraded QS signals in the presence of TMAH. They also showed resistance to toxic byproducts of TMAH degradation such as ammonium and formaldehyde. They effectively reduced the biofilm formation of Pseudomonas aeruginosa PAO1 and mixed community of activated sludge. The strains isolated in this study thus have the potential to be employed to reduce membrane biofouling in MBRs during the treatment of TMAH-containing wastewater.

Water reclamation and microbial community investigation: Treatment of tetramethylammonium hydroxide wastewater through an anaerobic osmotic membrane bioreactor hybrid system

Tetramethylammonium hydroxide (TMAH) is a toxic photoresist developer used in the photolithography process in thin-film transistor liquid crystal display (TFT-LCD) production, and it can be removed through anaerobic treatment. TMAH cannot be released into the environment because of its higher toxicity. A tight membrane, such as a forward osmosis (FO) membrane, together with an anaerobic biological process can ensure that no TMAH is released into the environment. Thus, for the first time, an anaerobic osmotic membrane bioreactor (AnOMBR) hybrid system was developed in this study to treat a low-strength TMAH wastewater and to simultaneously investigate its microbial community. Microfiltration extraction was used to mitigate the salinity accumulation, and a periodically physical water cleaning was utilized to mitigate the FO membrane fouling. The diluted draw solute (MgSO₄) was reconcentrated and reused by a membrane distillation (MD) process in the AnOMBR to achieve 99.99% TMAH removal in this AnOMBR-MD hybrid system, thereby ensuring that no TMAH is released into the natural environment. Moreover, the membrane fouling in the feed and draw sides were analyzed through the fluorescence excitation-emission matrix (FEEM) spectrophotometry to confirm that the humic acid-like materials were the primary membrane fouling components in this AnOMBR. Additionally, 16S rRNA metagenomics analysis indicated that Methanosaeta was the predominant contributor to methanogenesis and proliferated during the long-term operation. The methane yield was increased from 0.2 to 0.26 L CH₄/g COD when the methanogen species acclimatized to the saline system.

Removal of tetramethylammonium hydroxide (TMAH) in semiconductor wastewater using the nano-ozone H2O2 process

In this study, we used a nano-ozone bubble to enhance the efficiency of the ozone/H₂O₂ process for the degradation of tetramethylammonium hydroxide (TMAH) found in semiconductor wastewater at high levels. The nano-ozone bubble significantly increased ozone mass transfer rate compared to that of the macro-ozone bubble. The half-life of nano-ozone bubbles was 23 times longer than that of the nano-ozone bubbles. Due to the high ozone mass transfer rate and its durability, the nano-ozone bubble increased the TMAH degradation rate compared to that of the macro-ozone. The addition of H₂O₂ significantly increased the TMAH degradation rate constant by OH production during the nano-ozone bubbles/H₂O₂ process. The optimum conditions for TMAH removal was 25 °C and pH 10. Within 90 min of the nano-ozone/H₂O₂ process, TOC removal was 65 % while 80 % of nitrogen was converted into nitrate (NO₃^-) with 95 % of TMAM removal. Decreases in acute (40-fold) and chronic (2-fold) toxicity were achieved after applying the nano-ozone/H₂O₂ process to TMAH containing wastewater. However, there was no significant chronic toxicity decrease during the nano-ozone/H₂O₂ process of TMAH.

Green Nanofabrication Opportunities in the Semiconductor Industry: A Life Cycle Perspective

The turn of the 21st century heralded in the semiconductor age alongside the Anthropocene epoch, characterised by the ever-increasing human impact on the environment. The ecological consequences of semiconductor chip manufacturing are the most predominant within the electronics industry. This is due to current reliance upon large amounts of solvents, acids and gases that have numerous toxicological impacts. Management and assessment of hazardous chemicals is complicated by trade secrets and continual rapid change in the electronic manufacturing process. Of the many subprocesses involved in chip manufacturing, lithographic processes are of particular concern. Current developments in bottom-up lithography, such as directed self-assembly (DSA) of block copolymers (BCPs), are being considered as a next-generation technology for semiconductor chip production. These nanofabrication techniques present a novel opportunity for improving the sustainability of lithography by reducing the number of processing steps, energy and chemical waste products involved. At present, to the extent of our knowledge, there is no published life cycle assessment (LCA) evaluating the environmental impact of new bottom-up lithography versus conventional lithographic techniques. Quantification of this impact is central to verifying whether these new nanofabrication routes can replace conventional deposition techniques in industry as a more environmentally friendly option.

Gellan gum gel tissue phantoms and gel dosimeters with tunable electrical, mechanical and dosimetric properties

Gellan gum gels have been proposed as tissue- and water-mimicking materials (phantoms) applied in medical imaging and radiotherapy dosimetry. Phantoms often require ionic additives to induce desirable electrical conductivity, resistance to biological spoilage, and radical scavenging properties. However, gellan gum is strongly crosslinked by the typically used sodium salts, forming difficult-to-work with gels with reduced optical clarity. Herein we investigated lithium and tetramethylammonium chloride to induce the required electrical conductivity while maintaining optical clarity; lithium formate and methylparaben were used as a radical scavenger and antimicrobial additive, respectively. Using a multifactorial design of experiments, we studied and modeled the electrical and mechanical properties and liquid expulsion (syneresis) properties of the gels. Finally, by the addition of a radiation-sensitive tetrazolium salt, dosimeters with favorable properties were produced. The results described herein may be used to prepare tissue phantoms and dosimeters with tuned electrical, mechanical, and dosimetric properties.

Microbial properties of the granular sludge in a psychrophilic UASB reactor fed with electronics industry wastewater containing organic chemicals

In this study, a lab-scale upflow anaerobic sludge blanket (UASB) reactor was applied to the treatment of artificial electronics industry wastewater containing tetramethylammonium-hydroxide (TMAH), monoethanolamine (MEA), and isopropyl-alcohol (IPA) in order to evaluate process performance and degradation properties. During 800 days of operation, 96% efficiency of chemical oxygen demand (COD) removal was stably achieved at an organic loading rate of 8.5 kgCOD/m³/day at 18-19 °C. MEA degradation, carried out by acid-forming eubacteria, was confirmed within a week. The physical properties of the retained granular sludge were degraded by feeding with TMAH wastewater, but maintained by feeding with MEA wastewater due to an accumulation of species from the genus Methanosaeta and family Geobacteraceae. Analysis of the microbial community structure via SEM and 16S rRNA genes showed a proliferation of Methanomethylovorans-like cells and Methanosaeta-like cells at the surface and in the core of the granular sludge with TMAH, MEA and IPA acclimation. Furthermore, a batch degradation experiment confirmed that process inhibition due to increasing chemical concentration was relatively stronger for TMAH than for MEA or IPA. Thus, controlling the TMAH concentration of the influent to below 1 gCOD/L will be important for the stable treatment of electronics industry wastewater by UASB technology.

Synergistic and antagonistic interactions among organic and metallic components of the ambient particulate matter (PM) for the cytotoxicity measured by Chinese hamster ovary cells

Although PM_2.5 toxicity is known to be related to its chemical composition, the effect of interactions among various particles' components on the toxicity is not well explored. To understand these interactions, especially metals and organic compounds on PM_2.5 cytotoxicity, we chose several redox-active substances known to be present in the ambient particles such as metals (Cu, Fe, and Mn) and quinones [9,10-phenanthraquinone (PQ), 1,2-naphthoquinone (1,2-NQ), 1,4-naphthoquinone (1,4-NQ), and 5-hydroxy-1,4-naphthoquinone (5,H-1,4-NQ)]. Cytotoxicity was assessed through a Chinese hamster ovary (CHO) cells assay and expressed by a median lethal concentration (LC₅₀). Two methods were employed to assess the interactions. In the first method, we tested the impact of nontoxic level of a component on the LC₅₀ of other components. In the second method, we mixed two components in different concentration ratios to expose the cells and calculated a mixture toxicity index (MTI). MTI is a composite value to quantify the nature of interactions such that the interactions are considered synergistic when MTI > 1, additive when 0 < MTI ≤ 1 and antagonistic when MTI < 0. The interactions between quinones and metals were largely synergistic by both methods. To further assess the environmental relevance of these mixtures, we extracted organic compounds termed as water-soluble Humic-like substances (HULIS) from real ambient PM samples and mixed them with individual metals. A similar pattern, as observed from the interaction of quinones and metals, was found. Moreover, the interactions became more synergistic as the relative concentration of metals with respect to water-soluble HULIS was decreased in these mixtures. With environmentally relevant mass concentration ratios of organics to metals (75-7500), the interactions were strongly synergistic (MTI = 1-115). These results indicate the importance of incorporating the interaction among various PM components for estimating the net toxicity of ambient PM_2.5.

Multifunctionality of Polypyrrole Polyethyleneoxide Composites: Concurrent Sensing, Actuation and Energy Storage

In films of conducting polymers, the electrochemical reaction(s) drive the simultaneous variation of different material properties (reaction multifunctionality). Here, we present a parallel study of actuation-sensing-energy storage triple functionality of polypyrrole (PPy) blends with dodecylbenzenesulfonate (DBS-), PPy/DBS, without and with inclusion of polyethyleneoxide, PPy-PEO/DBS. The characterization of the response of both materials in aqueous solutions of four different salts indicated that all of the actuating, sensing and charge storage responses were, independent of the electrolyte, present for both materials, but stronger for the PPy-PEO/DBS films: 1.4× higher strains, 1.3× higher specific charge densities, 2.5× higher specific capacitances and increased ion-sensitivity towards the studied counterions. For both materials, the reaction energy, the material potential and the strain variations adapt to and sense the electrical and chemical (exchanged cation) conditions. The driving and the response of actuation, sensing and charge can be controlled/read, simultaneously, via just two connecting wires. Only the cooperative actuation of chemical macromolecular motors from functional cells has such chemical multifunctionality.

Mathematical Modeling Approaches for Assessing the Joint Toxicity of Chemical Mixtures Based on Luminescent Bacteria: A Systematic Review

Developments in industrial applications inevitably accelerate the discharge of enormous substances into the environment, whereas multi-component mixtures commonly cause joint toxicity which is distinct from the simple sum of independent effect. Thus, ecotoxicological assessment, by luminescent bioassays has recently brought increasing attention to overcome the environmental risks. Based on the above viewpoint, this review included a brief introduction to the occurrence and characteristics of toxic bioassay based on the luminescent bacteria. In order to assess the environmental risk of mixtures, a series of models for the prediction of the joint effect of multi-component mixtures have been summarized and discussed in-depth. Among them, Quantitative Structure-Activity Relationship (QSAR) method which was widely applied in silico has been described in detail. Furthermore, the reported potential mechanisms of joint toxicity on the luminescent bacteria were also overviewed, including the Trojan-horse type mechanism, funnel hypothesis, and fishing hypothesis. The future perspectives toward the development and application of toxicity assessment based on luminescent bacteria were proposed.

Pilot study of specific microbe immobilization cells (SMICs) technology in removing tetramethyl ammonium hydroxide for reuse of low-strength electronics wastewater

This study describes the specific microbe immobilization cell (SMIC) as an innovative technology for reuse of low-strength electronics wastewater. Pilot tests were performed to evaluate feasibility of this technology for removing slowly biodegradable organics including tetramethyl ammonium hydroxide (TMAH). SMIC pellets were prepared by entrapping concentrated culture of TMAH degrading bacteria inside media through polymerization. The operating conditions including hydraulic retention time, packing ratio of SMIC pellets, and recirculation ratio were optimized. The comparison data with conventional biological activated carbon (BAC) process exhibited superior removals in total organic carbon (TOC) as well as TMAH. SMIC process was applicable to the wastewater stream of up to 10 mg TOC/L. In addition, it was confirmed that sufficient amount of microorganisms were actively survived in SMIC pellets after 150 days of operation. Furthermore, economic analysis results showed that SMIC process was more cost-effective than BAC process.

Aerobic Treatment of Waste Process Solutions from the Semiconductor Industry: From Lab to Pilot Scale

Tetramethylammonium hydroxide (TMAH) is widely used as a solvent in the semiconductor industry. After the photo-impression process, it is necessary to remove the photoresist (PR) layer from the surface of the circuits; for this purpose, a TMAH solution is usually used. This chemical compound is highly toxic and corrosive and cannot be discharged into the environment. This study was carried out in collaboration with LFoundry (SMIC group), in order to prove the feasibility of biodegradation under aerobic conditions, using microorganisms coming from the LFoundry’s wastewater treatment plant (WWTP) at different operating conditions. The feed composition was modified in order to add a small but increasing amount of TMAH and PR. The aim was to verify if the increase of TMAH concentration was harmful to bacteria. The feed stream, containing TMAH and PR, was the only carbon source for the metabolism of the aerobic microorganisms. The results of this study demonstrated an effective biological degradation of TMAH and showed a total removal efficiency of more than 99.3%, with a final concentration of 7 mg/L. Moreover, the kinetic parameters of the Monod model were also calculated. The results obtained from the experimental campaign were used to design a pilot plant that will treat around 25 L/h of waste TMAH/PR solution.

Indoor and Outdoor Exposure to Volatile Organic Compounds and Health Risk Assessment in Residents Living near an Optoelectronics Industrial Park

This study aimed to determine indoor and outdoor levels of volatile organic compounds (VOCs) and to assess potential risks among residents living in the vicinity of an optoelectronics industrial park in 2006–2007. We used steel canisters to collect 72 indoor samples and 80 outdoor samples over 24 h. Gas chromatography with a mass-selective detector was used for qualitative and quantitative analyses. The amounts of time residents spent doing activities in different microenvironments were determined by the self-administered questionnaire. The chronic hazard index (HIc) and cancer risk were applied to assess the non-carcinogenic and carcinogenic risks of VOCs among residents. Four VOCs of ethanol (indoor: 77.8 ± 92.8 μg/m3; outdoor: 26.8 ± 49.6 μg/m3), toluene (67.0 ± 36.7 μg/m3; 56.9 ± 19.0 μg/m3), m/p-xylene (50.8 ± 66.1 μg/m3; 21.2 ± 20.3 μg/m3), and acetone (37.7 ± 27.5 μg/m3; 25.8 ± 9.8 μg/m3) were identified as dominant components in both the indoor and outdoor environments. Total VOCs and six VOCs of benzene, toluene, ethylbenzene, m/p-xylene, o-xylene, and ethanol in indoor sites were significantly higher than those in outdoor sites (all p-values < 0.05). All estimated HIc values were less than unity and the cancer risk of benzene exposure was 1.8 × 10−4 (range: 9.3 × 10−5 to 3.4 × 10−4) based on resident time-weighted patterns. Strategies to reduce benzene exposure should be implemented to protect public health.

A hydrofluoric acid-free method to dissolve and quantify silica nanoparticles in aqueous and solid matrices

As the commercial use of synthetic amorphous silica nanomaterials (SiO2-NPs) increases, their effects on the environment and human health have still not been explored in detail. An often-insurmountable obstacle for SiO2-NP fate and hazard research is the challenging analytics of solid particulate silica species, which involves toxic and corrosive hydrofluoric acid (HF). We therefore developed and validated a set of simple hydrofluoric acid-free sample preparation methods for the quantification of amorphous SiO2 micro- and nanoparticles. To circumvent HF, we dissolved the SiO2-NPs by base-catalyzed hydrolysis at room temperature or under microwave irradiation using potassium hydroxide, replacing the stabilizing fluoride ions with OH-, and exploiting the stability of the orthosilicic acid monomer under a strongly basic pH. Inductively coupled plasma - optical emission spectroscopy (ICP-OES) or a colorimetric assay served to quantify silicon. The lowest KOH: SiO2 molar ratio to effectively dissolve and quantify SiO2-NPs was 1.2 for colloidal Stöber SiO2-NPs at a pH >12. Fumed SiO2-NPs (Aerosil®) or food grade SiO2 (E551) containing SiO2-NPs were degradable at higher KOH: SiO2 ratios >8000. Thus, hydrofluoric acid-free SiO2-NP digestion protocols based on KOH present an effective (recoveries of >84%), less hazardous, and easy to implement alternative to current methods.

Selection of organosilicone surfactants for tank-mixed pesticides considering the balance between synergistic effects on pests and environmental risks

In this study, the bioactivities of binary mixtures of organosilicone surfactants and indoxacarb against two Lepidopteran pests were investigated along with their environmental risks. All of the tested organosilicone surfactants had obvious synergistic effects on the contact toxicity of indoxacarb against Spodoptera exigua and Agrotis ipsilon. However, all of the organosilicone surfactants exhibited certain antagonism for indoxacarb against S. exigua in terms of stomach & contact toxicity; both Silwet-408 and Silwet-806 exhibited additivity against A. ipsilon, whereas Silwet-618 and Silwet-DRS-60 exhibited synergism and slight antagonism, respectively. All of the tested chemicals were highly toxic to Daphnia magna, among which Silwet-DRS-60 had the lowest acute toxicity (EC₅₀ of 94.91 μg/L). However, these chemicals were less toxic to Brachydanio rerio. Silwet-DRS-60 had a low toxicity to B. rerio, while Silwet-408, Silwet-806 and Silwet-618 were moderately toxic to B. rerio. For the joint toxicity evaluation of organosilicone surfactants and indoxacarb to D. magna and B. rerio, the additive index method, concentration addition method and toxicity unit method were robust in judging synergism or antagonism, whereas other methods were more conservative; the V-value method and equilibrium curve method exhibited high robustness and viability in evaluating the combined effects of binary mixtures. Overall, we should carefully select organosilicone surfactants for premixed or tank-mixed pesticides in agriculture to obtain a balance between synergistic effects on pests and environmental risks.

Anti-apoptosis effect of amino acid modified gadofullerene via a mitochondria mediated pathway

A proposed molecular mechanism of the anti-apoptosis effect of GF-Ala through a mitochondria mediated pathway.

Methanogenic degradation of tetramethylammonium hydroxide by Methanomethylovorans and Methanosarcina

This study evaluated the methanogens responsible for methanogenic degradation of tetramethylammonium hydroxide (TMAH) in a continuous flow bioreactor. The enriched methanogens attained an estimated maximum specific TMAH degradation rate and half-saturation constant of 39.5 mg TMAH/gVSS/h and 820 mg/L, following the Monod-type kinetic expression for methanogenic TMAH degradation. Presence of sulfide more than 20 mg/L significantly extended lag period and slowed down specific TMAH degradation rates. The results of terminal restriction fragment length polymorphism (T-RFLP), cloning/sequencing, and quantitative real-time PCR analyses targeting on the methyl coenzyme M reductase alpha subunit (mcrA) genes retrieved from the bioreactor and batch experiments indicated that Methanomethylovorans species were the dominant methanogens responsible for methanogenic degradation of TMAH. The isolated TMAH-degrading methanogen from the bioreactor, however, was identified closely related to Methanosarcina mazei. It is likely that a very low TMAH environment in the bioreactor favored the growth of Methanomethylovorans hollandica, while the much higher TMAH in the isolation growth medium proliferated Methanosarcina mazei.

Nutrient removal by Chlorella vulgaris F1068 under cetyltrimethyl ammonium bromide induced hormesis

Toxicants are generally harmful to biotechnology in wastewater treatment. However, trace toxicant can induce microbial hormesis, but to date, it is still unknown how this phenomenon affects nutrient removal during municipal wastewater treatment process. Therefore, this study focused on the effects of hormesis induced by cetyltrimethyl ammonium bromide (CTAB), a representative quaternary ammonium cationic surfactant, on nutrient removal by Chlorella vulgaris F1068. Results showed that when the concentration of CTAB was less than 10 ng/L, the cellular components chlorophyll a, proteins, polysaccharides, and total lipids increased by 10.11, 58.17, 38.78, and 11.87 %, respectively, and some enzymes in nutrient metabolism of algal cells, such as glutamine synthetase (GS), acid phosphatase (ACP), H(+)-ATPase, and esterase, were also enhanced. As a result, the removal efficiencies of ammonia nitrogen (NH4 (+)) and total phosphorus (TP) increased by 14.66 and 8.51 %, respectively, compared to the control during a 7-day test period. The underlying mechanism was mainly due to an enhanced photosynthetic activity of C. vulgaris F1068 indicated by the increase in chlorophyll fluorescence parameters (the value of Fv/Fm, ΦII, Fv/Fo, and rETR increased by 12.99, 7.56, 25.59, and 8.11 %, respectively) and adenylate energy charge (AEC) (from 0.68 to 0.72). These results suggest that hormesis induced by trace toxicants could enhance the nutrient removal, which would be further considered in the design of municipal wastewater treatment processes. Graphical abstract The schematic mechanism of C. vulgaris F1068 under CTAB induced hormesis. Green arrows ( ) represent the increase and the red arrow ( ) represents the decrease.

Expanded and Practical Use of Logistic Equations in Eco-Toxicity Evaluation: Cases of Lethal Metal Toxicity Curves in Green Paramecia with Minimal-Sized Experiments

In ecological systems, living organisms are surrounded by a number of chemicals, among which certain portion may be toxic to organisms. Therefore, from the environment-centric point of view, importance of accurate eco-toxicological analyses is increasing day-by-day. Eco-toxicity responses in animals and other organisms against chemicals can be scored by several parameters such as median lethal concentration (LC50) and median lethal dose (LD50), for examples. In the present study, we attempted to perform simulations of eco-toxicological nature of given chemicals based on limited data size (showing apparently incomplete curves of toxicity response) through model experiments performed with green paramecia (Paramecium bursaria) exposed to toxic metal ions, by using practically re-arranged logistic equation and Hill-type equations with an aid by graphical elucidation of Gauss-Newton algorithm determining the constants and/or coefficients.

Biodegradability and aquatic toxicity of quaternary ammonium-based gemini surfactants: Effect of the spacer on their ecological properties

Aerobic biodegradability and aquatic toxicity of five types of quaternary ammonium-based gemini surfactants have been examined. The effect of the spacer structure and the head group polarity on the ecological properties of a series of dimeric dodecyl ammonium surfactants has been investigated. Standard tests for ready biodegradability assessment (OECD 310) were conducted for C12 alkyl chain gemini surfactants containing oxygen, nitrogen or a benzene ring in the spacer linkage and/or a hydroxyethyl group attached to the nitrogen atom of the head groups. According to the results obtained, the gemini surfactants examined cannot be considered as readily biodegradable compounds. The negligible biotransformation of the gemini surfactants under the standard biodegradation test conditions was found to be due to their toxic effects on the microbial population responsible for aerobic biodegradation. Aquatic toxicity of gemini surfactants was evaluated against Daphnia magna. The acute toxicity values to Daphnia magna, IC50 at 48 h exposure, ranged from 0.6 to 1 mg/L. On the basis of these values, the gemini surfactants tested should be classified as toxic or very toxic to the aquatic environment. However, the dimeric quaternary ammonium-based surfactants examined result to be less toxic than their corresponding monomeric analogs. Nevertheless the aquatic toxicity of these gemini surfactants can be reduced by increasing the molecule hydrophilicity by adding a heteroatom to the spacer or a hydroxyethyl group to the polar head groups.

Biodegradation of tetramethylammonium hydroxide (TMAH) in completely autotrophic nitrogen removal over nitrite (CANON) process

This study conducted a completely autotrophic nitrogen removal over nitrite (CANON) process in a continuous anoxic upflow bioreactor to treat synthetic wastewater with TMAH (tetramethylammonium hydroxide) ranging from 200 to 1000mg/L. The intermediates were analyzed for understanding the metabolic pathway of TMAH biodegradation in CANON process. In addition, (15)N-labeled TMAH was used as the substrate in a batch anoxic bioreactor to confirm that TMAH was converted to nitrogen gas in CANON process. The results indicated that TMAH was almost completely biodegraded in CANON system at different influent TMAH concentrations of 200, 500, and 1000mg/L. The average removal efficiencies of total nitrogen were higher than 90% during the experiments. Trimethylamine (TMA) and methylamine (MA) were found to be the main biodegradation intermediates of TMAH in CANON process. The production of nitrogen gas with (15)N-labeled during the batch anaerobic bioreactor indicated that CANON process successfully converted TMAH into nitrogen gas.

Effect of competing amines on the removal of tetramethylammonium hydroxide from solution using ion exchange

Tetramethylammonium hydroxide (TMAH, TMA(+)) has been widely used as the photoresist developer in semiconductor and thin film transistor liquid crystal display manufacturing. In this study, TMAH-containing wastewater was treated by ion exchange method. Strong acid cation exchange resin was used. A kinetics study revealed that the ion exchange reaction reached equilibrium within 20 min and it could be described by a pseudo-second-order model. To assess the effects of competing ions, wastewater was spiked with three different amines, namely ethylamine (EA(+)), diethylamine (DEA(+)), and triethylamine (TEA(+)). TMAH uptake decreased when in the presence of amines, and it decreased in the order EA(+) < DEA(+) < TEA(+). It could be attributed to different proton affinity (PA) and the strength of affinity between amine molecules and resin matrix, as found from the ab initio calculation values and Langmuir isotherm parameters. However, the interaction energy between sulphonic acid groups and interfering amines in solution using density functional theory (DFT) calculation resulted in a different trend compared with that of PA. The difference might be caused by stabilization of amines by resin matrix and different molecular structures.

Laccase-syringaldehyde-mediated degradation of trace organic contaminants in an enzymatic membrane reactor: Removal efficiency and effluent toxicity

Redox-mediators such as syringaldehyde (SA) can improve laccase-catalyzed degradation of trace organic contaminants (TrOCs) but may increase effluent toxicity. The degradation performance of 14 phenolic and 17 non-phenolic TrOCs by a continuous flow enzymatic membrane reactor (EMR) at different TrOC and SA loadings was assessed. A specific emphasis was placed on the investigation of the toxicity of the enzyme (laccase), SA, TrOCs and the treated effluent. Batch tests demonstrated significant individual and interactive toxicity of the laccase and SA preparations. Reduced removal of resistant TrOCs by the EMR was observed for dosages over 50μg/L. SA addition at a concentration of 10μM significantly improved TrOC removal, but no removal improvement was observed at the elevated SA concentrations of 50 and 100μM. The treated effluent showed significant toxicity at SA concentrations beyond 10μM, providing further evidence that higher dosage of SA must be avoided.

Toxicological evaluation of clay minerals and derived nanocomposites: a review

Clays and clay minerals are widely used in many facets of our society. This review addresses the main clays of each phyllosilicate groups, namely, kaolinite, montmorillonite (Mt) and sepiolite, placing special emphasis on Mt and kaolinite, which are the clays that are more frequently used in food packaging, one of the applications that are currently exhibiting higher development. The improvements in the composite materials obtained from clays and polymeric matrices are remarkable and well known, but the potential toxicological effects of unmodified or modified clay minerals and derived nanocomposites are currently being investigated with increased interest. In this sense, this work focused on a review of the published reports related to the analysis of the toxicological profile of commercial and novel modified clays and derived nanocomposites. An exhaustive review of the main in vitro and in vivo toxicological studies, antimicrobial activity assessments, and the human and environmental impacts of clays and derived nanocomposites was performed. From the analysis of the scientific literature different conclusions can be derived. Thus, in vitro studies suggest that clays in general induce cytotoxicity (with dependence on the clay, concentration, experimental system, etc.) with different underlying mechanisms such as necrosis/apoptosis, oxidative stress or genotoxicity. However, most of in vivo experiments performed in rodents showed no clear evidences of systemic toxicity even at doses of 5000mg/kg. Regarding to humans, pulmonary exposure is the most frequent, and although clays are usually mixed with other minerals, they have been reported to induce pneumoconiosis per se. Oral exposure is also common both intentionally and unintentionally. Although they do not show a high toxicity through this pathway, toxic effects could be induced due to the increased or reduced exposure to mineral elements. Finally, there are few studies about the effects of clay minerals on wildlife, with laboratory trials showing contradictory outcomes. Clay minerals have different applications in the environment, thus with a strict control of the concentrations used, they can provide beneficial uses. Despite the extensive number of reports available, there is also a need of systematic in vitro-in vivo extrapolation studies, with still scarce information on toxicity biomarkers such as inmunomodulatory effects or alteration of the genetic expression. In conclusion, a case by case toxicological evaluation is required taking into account that different clays have their own toxicological profiles, their modification can change this profile, and the potential increase of the human/environmental exposure to clay minerals due to their novel applications.