Hexavalent chromium adsorption from aqueous solution using carbon nano-onions (CNOs)

New Zein Protein Composites with High Performance in Phosphate Removal, Intrinsic Antibacterial, and Drug Delivery Capabilities

Herein, poly(N-(4-aminophenyl)methacrylamide)-carbon nano-onions [abbreviated as PAPMA-CNOs (f-CNOs)] integrated gallic acid cross-linked zein composite fibers (ZG/f-CNOs) were developed for the removal/recovery of phosphate from wastewater along with controlled drug delivery and intrinsic antibacterial characteristics. The composite fibers were produced by Forcespinning followed by a heat-pressure technique. The obtained ZG/f-CNOs composite fibers presented several favorable characteristics of nanoadsorbents and drug carriers. The composite fibers exhibited excellent adsorption capabilities for phosphate ions. The adsorption assessment demonstrated that composite fibers process highly selective sequestration of phosphate ions from polluted water, even in the presence of competing anions. The ZG/f-CNOs composite fibers presented a maximum phosphate adsorption capacity (qmax) of 2500 mg/g at pH 7.0. This represents the most efficient phosphate adsorption system among all of the reported nanocomposites to date. The isotherm studies and adsorption kinetics of the adsorbent showed that the adsorption experiments followed the pseudo-second-order and Langmuir isotherm model (R2 = 0.9999). After 13 adsorption/desorption cycles, the adsorbent could still maintain its adsorption efficiency of 96-98% at pH 7.0 while maintaining stability under thermal and chemical conditions. The results mark significant progress in the design of composite fibers for removing phosphates from wastewater, potentially aiding in alleviating eutrophication effects. Owing to the f-CNOs incorporation, ZG/f-CNOs composite fibers exhibited controlled drug delivery. An antibiotic azithromycin drug-encapsulated composite fibers presented a pH-mediated drug release in a controlled manner over 18 days. Furthermore, the composite fibers displayed excellent antibacterial efficiency against Gram-positive and Gram-negative bacteria without causing resistance. In addition, zein composite fibers showed augmented mechanical properties due to the presence of f-CNOs within the zein matrix. Nonetheless, the robust zein composite fibers with inherent stimuli-responsive drug delivery, antibacterial properties, and phosphate adsorption properties can be considered promising multifunctional composites for biomedical applications and environmental remediation.

Adsorptive-Photocatalytic Performance for Antibiotic and Personal Care Product Using Cu0.5Mn0.5Fe2O4

The amount of antibiotics and personal care products entering local sewage systems and ultimately natural waters is increasing and raising concerns about long-term human health effects. We developed an adsorptive photocatalyst, Cu_0.5Mn_0.5Fe₂O₄ nanoparticles, utilizing co-precipitation and calcination with melamine, and quantified its efficacy in removing paraben and oxytetracycline (OTC). During melamine calcination, Cu_0.5Mn_0.5Fe₂O₄ recrystallized, improving material crystallinity and purity for the adsorptive-photocatalytic reaction. Kinetic experiments showed that all four parabens and OTC were removed within 120 and 45 min. We found that contaminant adsorption and reaction with active radicals occurred almost simultaneously with the photocatalyst. OTC adsorption could be adequately described by the Brouers-Sotolongo kinetic and Freundlich isotherm models. OTC photocatalytic degradation started with a series of reactions at different carbon locations (i.e., decarboxamidation, deamination, dehydroxylation, demethylation, and tautomerization). Further toxicity testing showed that Zea mays L. and Vigna radiata L. shoot indexes were less affected by treated water than root indexes. The Zea mays L. endodermis thickness and area decreased considerably after exposure to the 25% (v/v)-treated water. Overall, Cu_0.5Mn_0.5Fe₂O₄ nanoparticles exhibit a remarkable adsorptive-photocatalytic performance for the degradation of tested antibiotics and personal care products.

Biomass-derived carbon nano-onions for the effective elimination of organic pollutants and oils from water

Oil spillage and leakage of organic solvents have caused severe environmental and ecological damages. It is of great significance to develop a cost-efficient and green adsorbent material with high uptake efficiency to separate the oil-water mixture. In this work, biomass-derived CNOs were first time explored in the adsorption of organic pollutants and oils from water. Carbon nano-onions (CNOs) with hydrophobicity and oleophilicity were cost-effectively synthesized in an energy efficient flame pyrolysis process using flaxseed oil as a carbon source. The as-synthesized CNOs without any further surface modification have shown high adsorption efficiency in removing organic solvents and oils from the oil-water mixture. The CNOs could adsorb diverse organic solvents such as pyridine (36.81 mg g^-1), dichloromethane (90.95 mg mg^-1), aniline (76 mg mg^-1), toluene (64 mg mg^-1), chloroform (36.25 mg mg^-1), methanol (49.25 mg mg^-1), and ethanol (42.25 mg mg^-1). The uptake capacity for petrol and diesel over CNOs was observed at 36.68 mg mg^-1 and 58.1 mg mg^-1, respectively. The adsorption of pyridine followed pseudo-second-order kinetics and Langmuir's isotherm model. Moreover, the adsorption efficiency of CNOs towards the remediation of pyridine was almost similar in real-water samples when tested in tap water, dam water, groundwater, and lake water. Similarly, the practical applicability for the separation of petrol and diesel was also verified in the real sample (sea water) and has been proven to be excellent. By simple evaporation, the recovered CNOs can be reused for more than 5 cycles. CNOs exhibit the promising potential to be used in practical applications for oil-polluted water treatment.

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5-100 mg·L^-1 Cr (VI) with a high flux of 300 L h^-1 m^-2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L^-1, the effluent concentration could still reach drinking water grade (<0.05 mg·L^-1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Turning waste into valuables: In situ deposition of polypyrrole on the obsolete mask for Cr(VI) removal and desalination

The global mask consumption has been exacerbated because of the coronavirus disease 2019 (COVID-19) pandemic. Simultaneously, the traditional mask disposal methods (incineration and landfill) have caused serious environmental pollution and waste of resources. Herein, a simple and green mass-production method has been proposed to recycle carbon protective mask (CPM) into the carbon protective mask/polydopamine/polypyrrole (CPM/PDA/PPy) composite by in situ polymerization of PPy. The CPM/PDA/PPy composite was used for the removal of Cr(VI) and salt ions to produce clean water. The synergistic effect of PPy and the CPM improved the removal capability of Cr(VI). The CPM/PDA/PPy composite provided high adsorption capacity (358.68 mg g^-1) and economic value (811.42 mg $^-1). Consequently, the CPM/PDA/PPy (cathode) was combined with MnO₂ (anode) for desalination in CDI cells, demonstrated excellent desalination capacity (26.65 mg g^-1) and ultrafast salt adsorption rate (6.96 mg g^-1 min^-1), which was higher than conventional CDI cells. Our work proposes a new low-carbon strategy to recycle discarded masks and demonstrates their utilization in Cr(VI) removal and seawater desalination.

Sustainable carbon nano-onions as an adsorbent for the efficient removal of oxo-anions

The increasing threats of oxo-anions in drinking water have posed a serious threat to human health, aquatic environment, ecology, and sustainability. Accordingly, developments of cost-effective and sustainable nanomaterials for water remediation are on top priority and highly sought in global research community. Carbon nano-onions (CNOs) are one of the emerging nanomaterials for water purification because of its unique morphology, surface reactivity, high density of surface-active sites, and microporous structure. Herein, flaxseed oil-derived CNOs are utilized as efficient adsorbent for the removal of toxic oxo-anions. Aside from the green and economic nature, CNOs provide high adsorption efficiency ~ 806.45 mg g^-1 for the removal of [Formula: see text] (99.9%) from aqueous system at ambient temperature, neutral pH in 70 min. The adsorption of [Formula: see text] onto CNOs was well fitted in pseudo-second order kinetics and followed the Langmuir adsorption isotherm model. The adsorption process was determined to be exothermic and spontaneous from the resulting thermodynamic characteristics. Furthermore, the high hydrophobic nature of CNOs make it recycling simpler. The real-life applicability of CNOs towards [Formula: see text] removal was tested in tap water, river water, and dam water. With all these observed results, CNOs show promise for practical water remediation applications.

Enrofloxacin and Sulfamethoxazole Sorption on Carbonized Leonardite: Kinetics, Isotherms, Influential Effects, and Antibacterial Activity toward S. aureus ATCC 25923

Excessive antibiotic use in veterinary applications has resulted in water contamination and potentially poses a serious threat to aquatic environments and human health. The objective of the current study was to quantify carbonized leonardite (cLND) adsorption capabilities to remove sulfamethoxazole (SMX)- and enrofloxacin (ENR)-contaminated water and to determine the microbial activity of ENR residuals on cLND following adsorption. The cLND samples prepared at 450 °C and 850 °C (cLND450 and cLND550, respectively) were evaluated for structural and physical characteristics and adsorption capabilities based on adsorption kinetics and isotherm studies. The low pyrolysis temperature of cLND resulted in a heterogeneous surface that was abundant in both hydrophobic and hydrophilic functional groups. SMX and ENR adsorption were best described using a pseudo-second-order rate expression. The SMX and ENR adsorption equilibrium data on cLND450 and cLND550 revealed their better compliance with a Langmuir isotherm than with four other models based on 2.3-fold higher values of q_mENR than q_mSMX. Under the presence of the environmental interference, the electrostatic interaction was the main contributing factor to the adsorption capability. Microbial activity experiments based on the growth of Staphylococcus aureus ATCC 25923 revealed that cLND could successfully adsorb and subsequently retain the adsorbed antibiotic on the cLND surface. This study demonstrated the potential of cLND550 as a suitable low-cost adsorbent for the highly efficient removal of antibiotics from water.

Squaramide-Immobilized Carbon Nanoparticles for Rapid and High-Efficiency Elimination of Anthropogenic Mercury Ions from Aquatic Systems

Water pollution due to environmental remediation and poor waste administration in certain areas of the globe signifies a serious problem in acquiring safe and clean drinking water. This problem is especially critical in rural areas, where advanced water purification techniques are deficient, and it remains a daunting task for ecosystem and public health protection. This critical task can be addressed herein by developing scalable poly squaramide-phenyl methacrylamide (PSQ)-functionalized carbon nanoparticles (CNPs) (PSQ-CNPs) with densely populated chelating sites with strong Hg²⁺-binding capacity. The PSQ-CNPs have shown high efficiency in removing Hg²⁺ from aqueous solution, providing a Hg²⁺ capacity of 2840 mg g^-1, surpassing all the amine and thiol-based adsorbents reported hitherto. More significantly, the adsorbent reveals the largest distribution coefficient value (K_d) of 9.09 × 10¹⁰ mL g^-1, which allows it to reduce Hg²⁺ content from 10 ppm to less than 0.011 ppb, well below the United States Environmental Protection Agency (EPA) limits for drinking water standards (2 ppb). The adsorption measurements of the adsorbent followed the Langmuir isotherm model and pseudo-second order. The practical applicability of PSQ-CNPs was verified with the real samples (the lake, river, and industrial wastewater) and has been proven to be excellent. The adsorbent could still retain its Hg²⁺ removal efficacy even after 12 sorption cycles. It is attributed that the remarkable performance of PSQ-CNPs arises from the high-density chelating sites and pores on the surface of CNPs. The present work shows a new benchmark for Hg²⁺-removal adsorbents and presents a novel practical approach for decontaminating Hg²⁺ and other heavy metal ions from wastewater.

Adsorption of Phenol onto Aluminum Oxide Nanoparticles: Performance Evaluation, Mechanism Exploration, and Principal Component Analysis (PCA) of Thermodynamics

The removal of phenolic compounds from aqueous solutions using novel adsorption techniques becomes a key research item. Of those, nanoparticles in particular, the low-cost and the high-strength aluminum oxide nanoparticles showed promising results in pollutant uptake and increase in the adsorption efficiency. This study examined various physicochemical process parameters such as temperature, pH, initial phenol concentration, and adsorbent doses, in addition to the impact of those parameters on the adsorption removal mechanism of phenol. The results highlighted that aluminum oxide nanoparticles successfully exhibited superior phenol removal from an aqueous solution in addition to a high potential regeneration of the consumed nanoparticles by HCl. For the adsorbent mass of 0.5 g, phenol adsorption uptake reached 92%. Kinetic studies performed using several models demonstrated the data best fitting with a pseudo-second-order kinetic model. Examining equilibrium studies of various isotherms, the adsorption data of phenol into aluminum oxide nanoparticles was confirmed to be controlled by film diffusion and best represented by the Langmuir isotherm. The maximum capacity of adsorption was 16.97 mg/g. For thermodynamics studies, the results indicated that the adsorption process can vary between endothermic and exothermic reactions. Such relative differences in heat generation and spontaneity in adsorption processes were demonstrated and confirmed by principal component analysis (PCA). This evidence is key for future investigations for the efficiency of adsorption conditions concerning the contaminant type and adsorbate compounds.

Biomanagement of hexavalent chromium: Current trends and promising perspectives

Chromium (Cr) is most widely used heavy metal with vast applications in industrial sectors such as metallurgy, automobile, leather, electroplating, etc. Subsequently, these industries discharge large volumes of toxic Cr containing industrial wastewaters without proper treatment/management into the environment, causing severe damage to human health and ecology. This review gives some novel insights on the existing, successful and promising bio-based approaches for Cr remediation. In lieu of the multiple limitations of the physical and chemical methods for remediation, various biological means have been deciphered, wherein dead and live biomass have shown immense capabilities of removing/reducing and/or remediating Cr from polluted environmental niches. Adsorption of Cr by various agro-based waste and reduction/precipitation by different microbial groups have shown promising results in chromium removal/recovery. Various microbial based agents and aquatic plants like duckweeds are emerging as efficient adsorbents of metals and their role in chromium bioremediation is an effective green technology that needs to be harnessed effectively. The role of iron and sulphur reducing bacteria have shown potential for enhanced Cr remediation. Biosurfactants have revealed immense scope as enhancers of microbial metal bioremediation and have been reported to have potential for use in chromium recovery as well. The authors also explore the combined use of biochar and biosurfactants as a potential strategy for chromium bioremediation for the development of technology worth adopting. Cr is non-renewable and finite resource, therefore its safe removal/recovery from wastes is of major significance for achieving social, economic and environmental sustainability.

Multiple applications of bio-graphene foam for efficient chromate ion removal and oil-water separation

This paper presents the synthesis of bio-graphene foams (bGFs) from renewable sources, and the application of bGFs as new adsorbents in removal of chromate ions and oil contaminants from waste water. A two-step synthetic method was developed to produce bGFs with unique porous architecture and high specific surface area (up to 805 m² g^-1) that is highly desirable for environmental applications. The adsorption performance of prepared bGFs for removal of chromate ions from water was studied in relation to CrO₄^2- concentration, adsorbent load, pH, and contact time to confirm adsorption capacity, kinetics and pH dependence. The adsorption isotherms of chromate ions were consistent with the Langmuir model, revealing an outstanding adsorption capacity of 245 mg of Cr(VI)/g bGFs (pH∼7). bGFs were capable of reducing Cr(VI) in water below the maximum permissible level (0.050 mg dm^-3) for human consumption (WHO). In a second application, our results convincingly showed excellent performance of bGFs in separating organic solvents and oils from water in a continuous oil-water separation process showing 99.1% and 98.8% separation efficiency for toluene and petroleum, respectively. Our findings confirm that the outstanding performance of bGFs, and suggest their use as efficient adsorbents for environmental remediation.

Novel carbon nano-onions from paraffinum liquidum for rapid and efficient removal of industrial dye from wastewater

Carbon nano-onions (CNOs) are fascinating zero-dimensional carbon materials owning distinct multi-shell architecture. Their physicochemical properties are highly related to the parent material selected and the synthesis protocol involved. In the present work, we report for the first time novel CNO structures encompassing discrete carbon allotropes, namely, H₁₈ carbon, Rh6 carbon, and n-diamond. These structures were cost-effectively synthesized in gram scale by facile flame pyrolysis of paraffinum liquidum, a highly refined mineral oil. The as-synthesized and chemically refashioned CNOs are quasi-spherical self-assembled mesopores, manifesting remarkable stability and hydrophilicity. The CNO structures exhibit excellent dye adsorption characteristics with high removal capacity of 1397.35 mg/g and rapid adsorption kinetics with a minimal adsorbent dosage of 10 mg/L, for a low concentration of 20 mg/L methylene blue dye. The novel CNOs assure potential implementation in the remediation of low concentration and high volume of dye-contaminated wastewater.Graphical abstract.

Adsorption Mechanism of Hexavalent Chromium on Biochar: Kinetic, Thermodynamic, and Characterization Studies

The adsorption mechanism of Cr⁶⁺ on biochar prepared from corn stalks (raw carbon) was studied by extracting the organic components (OC) and inorganic components (IC). Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the properties of three kinds of carbon. Kinetic and thermodynamic experiments were performed. The results showed that the experimental data were fitted well by the Freundlich model and the pseudo-second-order kinetic model, and the adsorptions on the three kinds of carbon were all spontaneous, endothermic processes. The adsorption of Cr⁶⁺ by biochar was in accordance with a chemisorption process. The adsorption contribution rate of the OC was 97%, which was much higher than that of the IC. Electrostatic attraction and redox reaction were the main mechanisms of adsorption, and among them, the contribution rate of the redox reaction accounted for 61.49%. The reduced Cr³⁺ could both exchange ions with K⁺ and dissociate into solution by electrostatic repulsion; the amount of Cr³⁺ released into the solution was approximately 17.07 mg/g, and the amount of Cr³⁺ ions exchanged with K⁺ was 0.29 mg/g. These results further elucidate the adsorption mechanism of Cr⁶⁺ by biochar.

Adsorptive performance of activated carbon reused from household drinking water filter for hexavalent chromium-contaminated water

Powdered activated carbon blocks (PACBs) are waste products obtained from household drinking water purification systems. In this study, we demonstrate that they can be used as adsorbents for the cost-effective and environmentally benign removal of hexavalent chromium (Cr(VI)) from contaminated-water and rinse electroplating wastewater. To evaluate Cr(VI) sorption onto the PACB, studies on equilibrium, kinetics, and thermodynamics were performed using batch mode experiments. The experimental results indicated that Cr(VI) ions were efficiently adsorbed under acidic conditions (i.e., at initial pH below 3) and low initial Cr(VI) concentrations. The adsorptive behaviors of the PACB for Cr(VI) were well explained by the Langmuir isotherm, as well as pseudo-second-order kinetic models, suggesting that a Cr(VI) monolayer was adsorbed onto the PACB surface via chemisorption. The maximum adsorption capacity of Cr(VI) onto the PACB was determined to be 6.207 mg/g. The results of thermodynamic studies revealed that the adsorption process of Cr(VI) onto PACB was endothermic and non-spontaneous. Additionally, analysis of the PACB after Cr(VI) adsorption at an initial pH of 2 using scanning electron microscopy, energy dispersive spectrometry, Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) revealed that the interaction between the surface oxygenic functional groups on the PACB and Cr(VI) was primarily responsible for Cr(VI) sorption via surface complexation and electrostatic interactions. Based on the result of XPS analysis, the presence of trivalent chromium on the PACB surfaces indicated that some synergistic redox reactions involving Cr(VI) could have occurred during the sorption process. Although a commercially available powdered activated carbon outperformed the PACB adsorbent with respect to Cr(VI) removal from wastewater, complete Cr(VI) adsorption could be achieved using relatively large quantities of the PACB. These findings indicate that the PACB adsorbent could be used as a cheap and efficient material for the removal of Cr(VI) from wastewater.

Efficient Removal of Cr(VI) Ions by a Novel Magnetic 4-Vinyl Pyridine Grafted Ni3Si2O5(OH)4 Multiwalled Nanotube

The contamination of water systems by heavy metals greatly threatens human health and ecological safety. An efficient adsorbent is critical for the removal of these contaminants. In this work, magnetic Ni3Si2O5(OH)4 nanotubes (NTs) have been synthesized via in situ hydrothermal reduction and further functionalized by grafting poly(4-vinyl pyridine) (P4VP) brushes on its surface via atom transfer radical polymerization. Characterizations by Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, and X-ray photoelectron spectroscopy proved that P4VP was successfully grafted on the surface of magnetic Ni3Si2O5(OH)4 NTs. The resultant Ni3Si2O5(OH)4-g-P4VP NTs are efficient nanosorbents for removing Cr(VI) anions from water. The Cr(VI) adsorption capacity of Ni3Si2O5(OH)4-g-P4VP NTs reaches 1.49 mmol/g at a pH of 3. The pseudo-second-order kinetic model and the Freundlich isothermal model are suitable to describe the adsorption process. The analysis using Weber-Morris and Boyd models indicates that both intraparticle diffusion and external film diffusion affect the Cr(VI) adsorption process. The adsorption enthalpy is estimated to be 18.37 kJ/mol. More than 90% of the Cr(VI) adsorption capacity of the Ni3Si2O5(OH)4-g-P4VP NTs remains after eight adsorption and desorption cycles.

Magnetic magnesium ferrite-doped multi-walled carbon nanotubes: an advanced treatment of chromium-containing wastewater

Magnetic magnesium ferrite (MgFe₂O₄) nanoparticles (MMFNPs) were synthesized by employing the sol-gel method. These nanoparticles were ultrasonically decorated onto the multi-walled carbon nanotubes (MWCNTs) to produce magnetic magnesium ferrite nanocomposites (MMFNCs). The as-prepared materials were investigated for their capability to treat wastewater loaded with heavy metals. The synthesized nanocomposites were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transmission infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and zeta analyzer. Besides, the effect of the environmental chemistry of the solution was determined by varying the critical parameters. The adsorption isotherm of Cr(VI) adsorption onto the as-synthesized MMFNC best fitted the Langmuir adsorption isotherm model. The high adsorption capacity of 175.43 mg/g was achieved at a temperature of 40 °C under optimized conditions. Due to the magnetic nature of MMFNC, they are easily recoverable from the aqueous solution making them cost-friendly. Even after seven consecutive adsorption-desorption cycles, the MMFNC presented an efficiency loss of less than 20% for the removal of Cr(VI) ions. The presented development method offers prospects in developing a highly effective magnetic adsorbent for heavy metal removal from wastewater.

A review of chromite mining in Sukinda Valley of India: impact and potential remediation measures

Sukinda Valley, one of the highly polluted areas of the world is generating tons of mining waste and causing serious health and environmental issues in its surroundings. Several reports are available reporting the severity of hexavalent chromium, yet little efforts have been made to address the pollution and its remediation due to a lack of proper remedial measures. The review highlights the pros and cons of various physical, chemical and biological techniques used worldwide for the treatment of chromium waste and also suggests better and reliable bioremediation measures. Microbes such as Acidophilium and Acidithiobacillus caldus (Bioleaching), Pseudomonas, Micrococcus and Bacillus (Bioreduction), Aereobacterium and Saccharomyces (Biosorption), are widely used for bioremediation of hexavalent chromium owing to their unique metabolic activities, ionic movement through an extracellular membrane, and other cellular adsorptions and reduction properties. The use of native and hybrid combinations of microbes supported by organic supplements is projected as a fast and efficient technique that not only reduces chromium quantity but also maintains the integrity of the microbial sources. Innovation and emphasis on nano-based products like nanocomposite, nano adsorbent, nanoscale zerovalent iron (nZVI) particles and multifunctional plant-growth-promoting bacteria (PGPB) will serve as the next generation environmental remediation technologies in the near future.

Highly efficient visible-light-driven reduction of Cr(vi) from water by porphyrin-based metal–organic frameworks: effect of band gap engineering on the photocatalytic activity

Highly efficient visible-light-assisted photocatalytic reduction of Cr(vi) to Cr(iii) from aqueous phase using Zr(iv)-porphyrin MOFs, Zr₆(μ₃-OH)₈(OH)₈(MTCPP)₂, (PCN-222(M)) (M = H₂, Zn^II, Cu^II, Ni^II, Co^II, Fe^IIICl, and Mn^IIICl) is presented.

Efficient visible light-driven core–shell-structured ZnS@Ag2S nanoparticles-anchored reduced graphene oxide for the reduction of Cr(vi)

Synthesis of a ZnS@Ag₂S/RGO nanocomposite with high photocatalytic performance for the removal of Cr(vi) based on the photo-induced interfacial charge transfer.

Two-Dimensional Titanium Carbides (Ti3C2Tx) Functionalized by Poly(m-phenylenediamine) for Efficient Adsorption and Reduction of Hexavalent Chromium

Titanium carbides (MXenes) are promising multifunctional materials. However, the negative surface charge and layer-by-layer restacking of MXenes severely restrict their application in the field of anionic pollutants, including in hexavalent chromium (Cr(VI)). Herein, Ti₃C₂T_x MXenes was functionalized through in situ polymerization and intercalation of poly(m-phenylenediamine) (PmPD), then Ti₃C₂T_x/PmPD composites were obtained. Delightedly, Ti₃C₂T_x/PmPD composites exhibited positive surface charge, expanded interlayer spacing, and enhanced hydrophobicity. Furthermore, the specific surface area of Ti₃C₂T_x/PmPD composite was five and 23 times that of Ti₃C₂T_x and PmPD, respectively. These advantages endowed Ti₃C₂T_x/PmPD composite with an excellent adsorption capacity of Cr(VI) (540.47 mg g^-1), which was superior to PmPD (384.73 mg g^-1), Ti₃C₂T_x MXene (137.45 mg g^-1), and the reported MXene-based adsorbents. The Cr(VI) removal mechanism mainly involved electrostatic adsorption, reduction, and chelation interaction. This study developed a simple functionalization strategy, which would greatly explore the potential of MXenes in the field of anionic pollutants.

Use of metal-organic framework to remove chromium (VI) from aqueous solutions

Chromium is one of the heavy metals found in industrial wastewaters, which have highly toxic to human beings and the environment. Exposure with it may cause some hazard diseases including stomach ulcers, liver, vomiting, kidney and nerve tissue damage, cancer in the lungs, and eventually death. The main objective of this study was to evaluate the efficiency of Uio-66 and ZIF-8 in removing chromium from aqueous solutions. For the synthesis of Uio-66 and ZIF-8, hydrothermal and sol-gel methods were used, respectively. The prepared Uio-66 and ZIF-8 were identified by FTIR, XRD, FE-SEM, EDX, and BET. All experiments were done in batch conditions. Uio-66 and ZIF-8 efficiency for chromium adsorption from aqueous solutions were investigated by variables like initial concentration (10-200 mg/l), pH (3 to 11), Uio-66 and ZIF-8 dosage (0.2 to 1 g/l) and contact time (45 min). The FE-SEM image showed that the sizes of Uio-66 crystals were between 140 and 280 nm. The specific surface area and total pore volume of the prepared Uio-66 and ZIF-8 were 800 m2/g, 0.45 m3/g, 1050 m2/g, and 0.57 m3/g, respectively. The results show chromium adsorption has increased in acid conditions. Equilibrium dosage for Uio-66 and ZIF-8 was 0.4 g/l and 0.6 g/l, respectively. Adsorption equilibrium was performed after 60 min and after this time, chromium adsorption did not significantly change. The study results showed that the experimental data obtained fitted with kinetic model pseudo-order- reaction and isotherm model of Langmuir.

Study of the properties and mechanism of deep reduction and efficient adsorption of Cr(VI) by low-cost Fe3O4-modified ceramsite

To efficiently treat low-concentration chromium wastewater at low cost, adsorbent iron-modified ceramsite (FCM) was successfully prepared. The adsorbent was characterized by SEM, XRD, FT-IR, XPS, ζ potential and VSM. From the experimental results, the optimum adsorption pH, adsorbent dosage and adsorption time were 4, 1g/L and 120min, respectively. The percentage removal of Cr(VI) was 93% and the reduction efficiency of Cr(VI) was 74.3% when the concentration was 2mg/L. After 5cycles, using 0.1mol/L NaOH as the regeneration agent, the removal rate of Cr(VI) did not decrease significantly. Furthermore, the mechanism of deep reduction and adsorption, the process of regeneration, the kinetics and adsorption isotherms were also explored. This paper can provide theoretical and technical support for reducing the toxicity and the advanced treatment of hexavalent chromium.

Synthesis of carbon nano-onion embedded metal-organic frameworks as an efficient adsorbent for cadmium ions: kinetic and thermodynamic studies

Carbon nano-onions (CNOs), metal-organic frameworks (MOF-199), and carbon nano-onion embedded metal-organic frameworks (CMOF-199) were synthesized from garlic peels as a green source of carbon atoms while MOF-199 was prepared by solvothermal interaction between 1,3,5-benzenetricarboxylic acid and copper nitrate trihydrate. All the prepared solid materials were characterized by nitrogen adsorption/desorption isotherm, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA), point of zero charge (pH_PZC), and Fourier transform infrared spectroscopy (FTIR). Adsorption of cadmium ions from aqueous solution was investigated onto all prepared solid materials considering different application conditions such as adsorbent dosage, pH, contact time, initial concentration of Cd⁺², and temperature. Adsorption of Cd⁺² was investigated by Langmuir, Freundlich, Temkin, and Dubinin-Radhushkevich adsorption isotherm models. Maximum adsorption capacity (113.3 mg g^-1) was achieved by CMOF-199 at 40 °C. The adsorption of Cd⁺² obeys pseudo-second-order kinetic model. Thermodynamic studies confirmed that the adsorption process is spontaneous, favorable, endothermic, and physisorption. Adsorption results proved that carbon nano-onion embedded metal-organic frameworks are promising solid adsorbents for cadmium ion adsorption.

Removal of hexavalent chromium from water using polyaniline/ wood sawdust/ poly ethylene glycol composite: an experimental study

Polyaniline/ Sawdust /Poly Ethylene Glycol/ (PANi/SD/PEG) composite synthesized chemically is used as an adsorbent to remove hexavalent chromium from water. Adsorption experiments have been done in batch and continuous (column) mode. Some parameter such as pH, contact time, PANi/SD/PEG dose, isotherms in batch mode and pH, column bed depth and fluid flow rate in column mode were investigated. Result shows that PANi/SD/PEG has a good performance to remove hexavalent chromium ion from aqueous media. By presence of PEG, prepared composite has been homogenized and further absorption has been occurred. The best adsorption occurs under pH 2 and optimum contact time for removal of hexavalent chromium ion in batch experiment was about 30 min. Adsorption of Cr (VI) by PANi/SD/PEG fitted well in Langmuir isotherms. Maximum adsorption of hexavalent chromium was calculated 3.2 (mg/g). In column experiments, pH and column bed depth were found to be more prominent than fluid flow rate. Though, about 22% of Cr (VI) can be recovered using 0.1 M NaOH in the batch system, the recovered Cr (VI) in column system was less than 7.9%.

Immobilization of Lead and Nickel Ions from Polluted Yam Peels Biomass Using Cement-Based Solidification/Stabilization Technique

Nowadays, biomass has been employed to prepare biosorbents for heavy metals uptake; however, further disposal of polluted material has limited its application. In this work, nickel and lead removal was performed using yam peels and the resulting polluted biomass was mixed with concrete to produce bricks. The biomass was characterized by FT-IR analysis for testing functional groups diversification before and after adsorption process. The effect of adsorbent dosage, temperature, and initial solution concentration was evaluated to select suitable values of these parameters. Adsorption results were adjusted to kinetic and isotherm models to determine adsorption mechanism. Desorption experiments were also performed to determine the appropriate desorbing agent as well as its concentration. Immobilization technique of cement-based solidification/stabilization was applied and the polluted biomass was incorporated to concrete bricks at 5 and 10%. Mechanical resistance and leaching tests were carried out to analyze the suitability of heavy metals immobilization. The suitable values for dosage, temperature, and initial solution concentration were 0.5 g/L, 40°C and 100 ppm, respectively. The kinetic model that best fitted experimental results was pseudo-second order indicating a dominant physicochemical interaction between the two phases. The highest desorption yields were found in 52.47 and 74.84% for nickel and lead ions. The concrete bricks exhibited compression resistance above 5 MPa and all the leachate reported concentrations below the environmental limit. These results suggested that nickel and lead immobilization using concrete bricks is a good alternative to meet disposal problems of contaminated biomass.

Highly enhanced photocatalytic Cr(vi) reduction using In-doped Zn(O,S) nanoparticles

Efficient photocatalytic reduction of highly toxic hexavalent chromium pollutants obtained from wastewater has become the focus of research these days due to their ecological and environmental influence.

Strong chromate-adsorbent based on pyrrolic nitrogen structure: An experimental and theoretical study on the adsorption mechanism

Chromate is considered a toxic contaminant in various water sources because it poses a risk to animal and human health. To meet the stringent limits for chromium in water and wastewater, pyrrolic nitrogen structure was investigated as a chromate adsorbent for aqueous solutions, employing a polypyrrole coating on carbon black. The characteristics of the adsorbent were analyzed by high-resolution transmission electron microscopy, energy-filtered transmission electron microscopy, and X-ray photoelectron spectroscopy. Chromate was adsorbed as both Cr(III) and Cr(VI). The chromate adsorption capacity increased (from 50.84 to 174.81 mg/g) with increasing amounts of pyrrole monomers (from 50 to 86%) in the adsorbent. The adsorption capacity was well-correlated with the pyrrolic nitrogen content (from 2.06 to 6.57 at%) in the adsorbent, rather than other types of nitrogen. The optimized adsorption capacity (174.81 mg/g in the equilibrium batch experiment and 211.10 mg/g at an initial pH of 3) was far superior to those of conventional adsorbents. We investigated the mechanism behind this powerful chromate adsorption on pyrrolic nitrogen via physical/chemical analyses of the pH-dependent adsorption behavior, supported by first-principles calculation based on density functional theory. We found that Cr(III) and Cr(VI) adsorption followed different reaction paths. Cr(III) adsorption occurred in two sequential steps: 1) A Jones oxidation reaction (JOR)-like reaction of Cr(VI) with pyrrolic N that generates Cr(III), and 2) Cr(III) adsorption on the deprotonated pyrrolic N through Cr(III)-N covalent bonding. Cr(VI) adsorption followed an alternative path: hydrogen-bonding to the deprotonation-free pyrrolic N sites. The pH-dependent fractional deprotonation of the pyrrolic N sites by the JOR-like reaction in the presence of chromate played an important role in the adsorption.

Kinetic and thermodynamic studies on the adsorption of heavy metals from aqueous solution by melanin nanopigment obtained from marine source: Pseudomonas stutzeri

The difficulty in removal of heavy metals at concentrations below 10 mg/L has led to the exploration of efficient adsorbents for removal of heavy metals. The adsorption capacity of biosynthesized melanin for Mercury (Hg(II)), Chromium (Cr(VI)), Lead (Pb(II)) and Copper (Cu(II)) was investigated at different operating conditions like pH, time, initial concentration and temperature. The heavy metals adsorption process was well illustrated by the Lagergren's pseudo-second-order kinetic model and the equilibrium data fitted excellently to Langmuir isotherm. Maximum adsorption capacity obtained from Langmuir isotherm for Hg(II) was 82.4 mg/g, Cr(VI) was 126.9 mg/g, Pb(II) was 147.5 mg/g and Cu(II) was 167.8 mg/g. The thermodynamic parameters revealed that the adsorption of heavy metals on melanin is favorable, spontaneous and endothermic in nature. Binding of heavy metals on melanin surface was proved by Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). Contemplating the results, biosynthesized melanin can be a potential adsorbent for efficient removal of Hg(II), Cr(VI), Pb(II) and Cu(II) ions from aqueous solution.