Novel synergistic hydrous iron-nickel-manganese (HINM) trimetal oxide for hazardous arsenite removal

Development of novel Core-shell impregnated polyuronate composite beads for an eco-efficient removal of arsenic

Arsenic (As) can geogenically and anthropogenically contaminate the potable water resources and undoubtedly reduces its availability for human consumption. To circumvent this predicament, present study focuses on the development of a novel biosorbent by impregnating calcium cross-linked polyuronate (alginate) beads (CABs) with bilayer-oleic coated magnetite nanoparticles (CAB@BOFe) for As(V) removal. Initially, the system parameters (i.e., adsorbents dose (0.1- 3.0 g L-1), pH (4.0-13), reaction times (0-180 min) and sorbate concentrations (10-150 µg L-1)) were optimized to establish adsorbent at the lab-scale. CAB@BOFe had higher monolayer (ad)sorption capacity (∼62.5 µg g-1, 120 min) than CABs (∼17.9 µg g-1, 180 min). Electrostatic/Ion-dipole interactions and surface-complexation mechanisms mediated As(V) sorption onto CAB@BOFe mainly obeyed Langmuir isotherm (R2 ∼ 0.9) and well described by intraparticle diffusion process. Furthermore, it demonstrated an excellent arsenate removal performance from the single/multiple anionic contaminants simulated water samples which supported its prospective field applicability.

Recent advances in application of iron-manganese oxide nanomaterials for removal of heavy metals in the aquatic environment

Heavy metal pollution has a serious negative impact on the ecological environment and human health due to its toxicity, persistence, and non-biodegradable properties. Among the technologies applied in heavy metals removal, adsorption has been widely used as the most promising method because of its simple operation, high removal efficiency, strong applicability, and low cost. Iron-manganese oxide nanomaterials, as an effective absorbent, have attracted wide attention due to their simple preparation, wide material sources, and lower ecological impact. So far, no quantitative investigation has been conducted on the preparation and application of iron-manganese oxide nanomaterials in heavy metals removal. This review discussed the preparation methods and characteristics of iron‑manganese oxide nanomaterials over the past decade and provided some basic information for the improvement of preparation methods. The physicochemical properties of iron‑manganese oxide nanomaterials and environmental conditions are regarded as important factors that affect the removal efficiency of heavy metals. In addition, the removal mechanisms of heavy metals in aqueous solution with iron‑manganese oxide nanomaterials were mainly included redox, complex precipitation, electrostatic attraction, and ion exchange. The reusability and practicability in actual wastewater treatment of 3nganese oxide nanomaterials were further discussed. Several key problems still need to be solved in the existing progress, such as improving the ability and stability of the iron‑manganese oxide nanomaterials to remove heavy metals from actual wastewater. In conclusion, this review provides a future direction for the application of iron‑manganese oxide nanomaterials for heavy metals removal and even in the large-scale treatment of actual wastewater.

Efficient Sorption of Arsenic on Nanostructured Fe-Cu Binary Oxides: Influence of Structure and Crystallinity

To study the structure-performance relationship, a series of nanostructured Fe-Cu binary oxides (FCBOs) were prepared by varying synthesis conditions. The obtained binary oxides were well characterized using X-ray diffraction (XRD), transmission electron microscope (TEM), Brunner-Emmet-Teller (BET), magnetic and Zeta potential measurement techniques. Both As(V) and As(III) sorption on the FCBOs were evaluated by batch tests. Results show that the surface structure and crystallinity of FCBOs are greatly dependent on preparation conditions. The crystallinity of FCBOs gradually increases as the synthesis pH value increasing from 9.0 to 13.0, from amorphous phase to well-crystalline one. Simultaneously, the morphology change of FCBOs from irregular agglomerate to relatively uniform polyhedron has been observed. The sorption of arsenic is greatly influenced by the crystallinity and structure of FCBOs, decreasing with increasing degree of crystallinity. The amorphous FCBO has higher surface hydroxyl density than well-crystalline one, which might be the reason of higher sorption performance. As(V) is sorbed by the FCBOs via formation of inner-sphere surface complexes and As(III) is sorbed through formation of both inner- and outer-sphere surface complexes. This investigation provides new insights into structure-performance relationship of the FCBO system, which are beneficial to develop new and efficient sorbents.

Self-enhanced and efficient removal of As(III) from water using Fe-Cu-Mn composite oxide under visible-light irradiation: Synergistic oxidation and mechanisms

Here, we prepared a novel nanostructured Fe-Cu-Mn composite oxide (FCMO_x) adsorbent using an ultrasonic coprecipitation method. The maximum adsorption capacity of As(III) and As(V) reached 158.5 and 115.2 mg/g under neutral conditions, respectively. The effects of several environmental factors (coexisting ions, solution pH, etc.) on the removal of inorganic arsenic using FCMO_x were studied through batch experiments. The results showed that except for PO₄^3- and high initial pH, it was not significantly affected by ionic strength and other existing anions, implying a higher selectivity and adaptability. Combined with EPR, FTIR, and XPS analysis, we concluded that the Cu component and the reactive oxygen species (ROS) it generates played a decisive role in maintaining the stability of the redox cycle between Mn(IV)/Mn(III)/Mn(II) and enhancing the oxidation efficiency of As(III). Meanwhile, the adsorption mechanism of As(V) was mainly through the replacement of the FCMO_x surface -OH to form stable inner-sphere arsenic complexes, while the removal mechanism of As(III) may involve the process of synergistic oxidation and chemisorption coupling. Additionally, the effective removal of As from the simulated As-contaminated water and its satisfactory reuse performance make FCMO_x adsorbents favorable candidates for the removal of As-contaminated water in the future.

Review on heterogeneous oxidation and adsorption for arsenic removal from drinking water

The long term exposure of arsenic via drinking water has resulted in wide occurrence of arsenisim globally, and the oxidation of the non-ionic arsenite (As(III)) to negatively-charged arsenate (As(V)) is of crucial importance for the promising removal of arsenic. The chemical oxidants of ozone, chlorine, chlorine dioxide, and potassium permanganate may achieve this goal; however, their application in developing countries is sometimes restricted by the complicate operation and high cost. This review paper focuses on the heterogeneous oxidation of As(III) by solid oxidants such as manganese oxide, and the adsorption of As(V) accordingly. Manganese oxide may be prepared by both chemical and biological methods to achieve good oxidation performance towards As(III). Additionally, manganese oxide may be combined with other metal oxides, e.g., iron oxide, to improve the adsorption capability towards As(V). Furthermore, manganese oxide may be coated onto porous materials of metal organic frameworks to develop novel adsorbents for arsenic removal. To achieve the application in engineering works, the adsorbents granulation may be achieved by drying and calcination, agglomeration, and the active components may also be in situ coated onto the porous materials to maintain the oxidation and adsorption activities as much as possible. The novel adsorbents with heterogeneous oxidation and adsorption capability may be carefully designed for the removal of arsenic in household purifiers, community-level decentralized small systems, and the large-scale drinking water treatment plants (DWTPs). This review provides insight into the fundamental studies on novel adsorbents, the development of innovative technologies, and the demonstration engineering works involved in the heterogeneous oxidation and adsorption, and may be practically valuable for the arsenic pollution control globally.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

A review on the potential of photocatalysis in combatting SARS-CoV-2 in wastewater

Photocatalytic technology offers powerful virus disinfection in wastewater via oxidative capability with minimum harmful by-products generation. This review paper aims to provide state-of-the-art photocatalytic technology in battling transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in wastewater. Prior to that, the advantages and limitations of the existing conventional and advanced oxidation processes for virus disinfection in water systems were thoroughly examined. A wide spectrum of virus degradation by various photocatalysts was then considered to understand the potential mechanism for deactivating this deadly virus. The challenges and future perspectives were comprehensively discussed at the end of this review describing the limitations of current photocatalytic technology and suggesting a realistic outlook on advanced photocatalytic technology as a potential solution in dealing with similar upcoming pandemics. The major finding of this review including discovery of a vision on the possible photocatalytic approaches that have been proven to be outstanding against other viruses and subsequently combatting SARS-CoV-2 in wastewater. This review intends to deliver insightful information and discussion on the potential of photocatalysis in battling COVID-19 transmission through wastewater.

Adsorption of As(V) and Ni(II) by Fe-Biochar composite fabricated by co-pyrolysis of orange peel and red mud

This study aimed to compare the adsorption performance of Fe-biochar composites (Fe-C-N₂ and Fe-C-CO₂), fabricated by co-pyrolysis of red mud and orange peel in N₂ and CO₂, for As(V) and Ni(II). By the syngas production comparison test, it was confirmed that CO₂ was more advantageous than N₂ as a pyrolytic medium gas to produce more CO. The resulting Fe-biochar composite showed the aggregate morphology consisting of different Fe phases (magnetite or metal Fe) from the inherent hematite phase in red mud and carbonized carbon matrix, and there was no distinct difference between the structural shapes of two Fe-biochar composites. Adsorption experiments showed that the adsorption capacities for As(V) and Ni(II) in single mode were almost similar with 7.5 and 16.2 mg g^-1 for Fe-C-N₂ and 5.6 and 15.1 mg g^-1 for Fe-C-CO₂, respectively. The adsorption ability of Fe-C-CO₂ for both As(V) and Ni(II) was further enhanced in binary adsorption mode (As(V): 13.4 mg g^-1, Ni(II):17.6 mg g^-1) through additional removal of those ions by Ni(II)-As(V) complexation. The overall results demonstrated CO₂-assisted pyrolysis can provide a viable platform to convert waste materials into fuel gases and environmental media for co-adsorption of cationic and anionic heavy metals.

Polyvinyl alcohol-stabilized granular Fe-Mn binary oxide as an effective adsorbent for simultaneous removal of arsenate and arsenite

A novel granular Fe-Mn (GFM) binary oxide sorbent, with a diameter of approximate 2.0 mm and a length of 2.0-3.0 mm, was successfully prepared using extrusion granulation method in this study. The GFM sorbent is highly porous with a BET-specific surface area of 210.3 m²/g. It shows high effectiveness in simultaneously adsorbing As(V) and As(III). The maximal sorption capacities for As(V) and As(III) are 33.2 and 50.7 mg/g at pH 7.0 ± 0.1, respectively, which are superior to most of granular sorbents reported in the literature. The present Ca²⁺, Mg²⁺, humic acids and fulvic acids do not have obvious influence on the arsenic sorption. But, coexisting anions affect negatively arsenic sorption in the following order: H₂PO₄ ^- > SiO₃ ^2- > HCO₃ ^- > SO₄ ^2-. NaOH solution is an effective eluent for regeneration of the arsenic-loaded GFM. The GFM packed in the fixed-bed column can treat approximately 3400 and 6500 bed volumes of simulated groundwater containing 233 μg/L As(V) and As(III), respectively, before the arsenic concentration in the effluent reached a drinking water limit of 10 μg/L. The features of high effectiveness, selectivity and reusability make the GFM a potential alternative to remove simultaneously As(V) and As(III) from groundwater.

Adsorption of arsenite by core–shell K-OMS-2@UiO-66 microspheres: performance and mechanism

Arsenite (As(iii)) is more toxic and more difficult to remove from water than arsenate (As(v)).

Reducing arsenic and groundwater contaminants down to safe level for drinking purposes via Fe3+-attached hybrid column

Monitoring of groundwater is fundamentally important due to it has emerged as a major source of drinking water and also used for irrigation purposes in many places in the world. Arsenic contamination in surface water and groundwater resources is a major concern due to its presence at high concentration and associated adverse health effects. Thus, the remediation of As in water resources, alongside other chemical species including fluoride, lithium, vanadium aluminium and nitrate is necessary. We have designed a hybrid [polyethyleneimine (PEI)-supported Fe³⁺-attached poly-(HEMA-co-GMA)] column for the reduction of arsenic (III and V) and other groundwater chemicals from natural groundwater as a potential contribution to water resource management. Swelling behaviour and scanning electron microscopy (SEM) were performed for the characterization of hybrid material. For the optimization of experimental conditions, the effects of pH and initial arsenic concentrations on adsorption were studied using arsenic solutions. Maximum adsorption capacity in equilibrium was 11.44 and 5.79 mg/g polymer for As(III) and As(V), respectively at pH 7. The reduction of metalloids and other subsurface chemicals were carried out with natural groundwater samples obtained from local sources. The mean concentrations of arsenic were recorded between 44.96 and 219.04 μg/L and of which 71.3-95.4 % (0.32-1.22 mg/g) were removed. The average removals were determined as F^-1 50-86%, Li⁺ 43.2-99.7%, Al⁺³ 83.8-91.4%, NO₃^- 48.4-72.2% and V 91.3-95.7. Chemical-loaded hybrid columns were regenerated successfully 15 times with only a loss of 5% in adsorption capacity by 0.01 M NaCl^- treatment for potential adaptation into water industry. No pre-oxidation of As species was performed for the treatment of ground water samples prior to the hybrid column testing.

Adsorptive nanocomposite membranes for heavy metal remediation: Recent progresses and challenges

Heavy metal contamination in aqueous system has attracted global attention due to the toxicity and carcinogenicity effects towards living bodies. Among available removal techniques, adsorptive removal by nanosized materials such as metal oxide, metal organic frameworks, zeolite and carbon-based materials has attracted much attention due to the large active surface area, large number of functional groups, high chemical and thermal stability which led to outstanding adsorption performance. However, the usage of nanosized materials is restricted by the difficulty in separating the spent adsorbent from aqueous solution. The shift towards the use of adsorptive composite membrane for heavy metal ions removal has attracted much attention due to the synergistic properties of adsorption and filtration approaches in a same chamber. Thus, this review critically discusses the development of nanoadsorbents and adsorptive nanocomposite membranes for heavy metal removal over the last decade. The adsorption mechanism of heavy metal ions by the advanced nanoadsorbents is also discussed using kinetic and isotherm models. The challenges and future prospect of adsorptive membrane technology for heavy metal removal is presented at the end of this review.