Control strategy for filamentous sludge bulking: Bench-scale test and full-scale application

Filamentous bacteria in activated sludge: Geographic distribution and impact of treatment processes

In this study, a global activated sludge communities database was used to investigate the global distribution of filamentous bacteria. The dominant filamentous bacteria worldwide were Zoogloea ramigera and Eikelboom type 1863. The incidence of sludge bulking in samples from Europe (22.4%), South America (18.8%), and North America (15.6%) was significantly higher than in other continents. The distribution of remaining filamentous bacteria shows significant regional variability. In addition, climate significantly affects the distribution of filamentous bacterial populations. The filamentous bacterial abundance in samples from polar climates (7.36%) and cold climates (4.13%) was significantly higher than in other climates. Candidatus Microthrix parvicella and Tetrasphaera spp. were the dominant filamentous bacteria in cold region. Wastewater treatment processes are also key factors affecting filamentous bacterial populations. The incidence of sludge bulking (21.6%) and the average abundance of filamentous bacteria (5.08%) in samples from CM processes were the highest, mainly induced by Thiothrix spp. In addition, filamentous sludge bulking is easily induced by Thiothrix spp. in SBR processes, and sludge bulking is easily induced by Zoogloea ramigera in PFR processes. This study provides new insights into preventing and controlling filamentous sludge bulking globally.

Multi-agent large language model frameworks: Unlocking new possibilities for optimizing wastewater treatment operation

Wastewater treatment plants (WWTPs) are highly complex systems where biological, chemical, and physical processes interact dynamically, creating significant operational challenges. Traditional modeling approaches, such as Activated Sludge Models (ASMs) and machine learning algorithms (MLAs), struggle to process the unstructured and multimodal data generated in WWTPs, limiting their effectiveness. Large Language Models (LLMs) offer a promising solution by integrating diverse data sources, recognizing patterns, and enabling human-in-the-loop interactions for informed decision-making. However, the complexity of WWTP operations exceeds the capabilities of a single LLM, necessitating a multi-agent framework where specialized agents collaborate to analyze diverse data streams and generate targeted recommendations. This perspective paper highlights how multi-agent, tool-equipped LLMs can enhance process control, optimize decision-making, and improve real-time adaptability in WWTPs. A case study on sludge bulking illustrates their potential over traditional methods. While challenges such as computational costs and AI-driven decision risks exist, they can be mitigated through validation, human oversight, and interpretability tools. Multi-agent LLMs represent a scalable and adaptable approach, positioning AI-driven decision support as a key innovation for WWTP operations.

Effects of silica fume powder modified by oleic acid on the settleability of bulking sludge

Modified silica fume powder with oleic acid through coupling agent was prepared based on the in situ utilizing long-chain fatty acids (LCFA) properties of Microthrix parvicella (M. parvicella) in the activated sludge system. The modification was confirmed by XRD and infrared spectrum. The contact angle analysis showed that the modification gave the silica fume powder a hydrophobic surface. The modified silica fume powder had a good combination with M. parvicella from the SEM and Gram staining measurements. The addition of modified silica powder has a certain effect on the settling capacity of sludge, but has little effect on the sludge treatment capacity, while the SVI dropped from 400.1 to 100.0 mL/g. These suggested that the modified silica fume powder could be used as an excellent weight-increasing agent to inhibit sludge bulking.

Elucidating performance failure in the use of an Anaerobic-Oxic-Anoxic (AOA) plug-flow system for biological nutrient removal

The Anaerobic-oxic-anoxic (AOA) process is a carbon-saving and high-efficiency way to treat municipal wastewater and gets more attention. Recent reports suggest that in the AOA process, well-performed endogenous denitrification (ED), conducted by glycogen accumulating organisms (GAOs), is crucial to advanced nutrient removal. However, the consensuses about starting up and optimizing AOA, and in-situ enriching GAOs, are still lacking. Hence, this study tried to verify whether AOA could be established in an ongoing anaerobic-oxic (AO) system. For this aim, a lab-scale plug-flow reactor (working volume of 40 L) previously operated under AO mode for 150 days, during that 97.87 % of ammonium was oxidized to nitrate and 44.4 % of orthophosphate was absorbed. Contrary to expectations, under AOA mode, little nitrate reduction (only 6.3 mg/L within 5.33 h) indicated the failure of ED. According to high-throughput sequencing analysis, GAOs (Candidatus_Competibacter and Defluviicoccus) were enriched within the AO period (14.27 % and 3 %) and then still dominated during the AOA period (13.9 % and 10.07 %) but contributed little to ED. Although apparent alternate orthophosphate variations existed in this reactor, no typical phosphorus accumulating organisms were abundant (< 2 %). More than that, within the long-term AOA operation (109 days), the nitrification weakened (merely 40.11 % of ammonium been oxidized) since the dual effects of low dissolved oxygen and long unaerated duration. This work reveals the necessity of developing practical strategies for starting and optimizing AOA, and then three aspects in future studying are pointed out.

Regulation of exogenous acyl homoserine lactones on sludge settling performance: Monitoring via ultrasonic time-domain reflectometry

Despite extensive studies, a comprehensive solution for sludge bulking has not yet been found. This study improves the sludge settling performance via quorum sensing (QS) by adding exogenous acyl homoserine lactones (AHLs). First, a novel approach based on ultrasonic time-domain reflectometry, which can automatically and in-situ assess a sludge volume index (SVI), was developed using the displacement in the ultrasonic spectra as a feasible indicator (R² = 0.98, p < 0.01). Next, the effects of typical AHLs, i.e., 3OC6-HSL, C12-HSL, and 3OC14-HSL, on sludge settling properties were investigated. Results indicated that the three AHLs significantly promoted the sludge settleability by 1.90, 2.03, and 1.62 times, respectively. The regulation mechanisms were investigated from the perspective of sludge physicochemical properties and biological community interactions. The draining degree of water to extracellular polymeric substances (EPS) significantly increased (p < 0.05) with all three AHLs. Meanwhile, the hydrophobic tryptophan content increased with the addition of 3OC6-HSL and C12-HSL. Hence, EPS hydrophobicity was promoted, which is conducive to microbial aggregation. In addition, molecular ecological networks of activated sludge (AS) indicated that bacterial community structures were more complex and species interactions were more intense when adding 3OC6-HSL and C12-HSL. Meanwhile, additional keystones were identified, with the proportion of QS species increasing by 63.6% and 22.2%, respectively. Exogenous 3OC6-HSL eventually decreased the gross relative abundance of filamentous bacteria by 2.37%. Overall, appropriate AHLs could enhance community stability and microbial cooperation by strengthening the communication hub role of QS species, thereby suppressing the overgrowth of filamentous bacteria and improving the sludge settleability. This study provides an effective strategy to determine the appropriate AHL to rapidly eliminate filamentous bulking problems.

A Multi-View Image Feature Fusion Network Applied in Analysis of Aeration Velocity for WWTP

The instability of the aeration system brings a significant challenge to the management of wastewater treatment plants (WWTP). Using image recognition methods to monitor aeration conditions accurately and enhance management efficiency is a promising way to solve this problem. To improve the efficiency of aeration condition identification and provide support for troubleshooting, we propose a method for aeration velocity condition identification based on a multi-view image feature fusion network (MVNN). Firstly, an experimental platform for simulating aeration tanks is established, and two cameras are used to acquire aeration images from different perspectives. Secondly, an image data set with 10 aeration velocity gradients is constructed and applied to the network’s training. Finally, the MVNN is used to extract and fuse the features of aeration images, and the model’s performance is evaluated on the dataset. Experiments show that the average accuracy of the method is over 98.3%, and the AUC of aeration identification is above 0.98, which indicates that the model has the potential for practical application in WWTP.

Impact of starvation conditions on the nitrifying performance and sludge properties in SBR system with a limited filamentous bulking state

Limited filamentous bulking (LFB) induced by low dissolved oxygen in activated sludge system is an effective energy saving process. However, starvation environment is liable to result in the unbalance between filaments and flocs, affecting the LFB system performance. The variations in nitrifying performance and properties of LFB sludge during 14 days of four starvation conditions (aerobic, alternating anaerobic/aerobic, anaerobic and anoxic) and their subsequent recovery were investigated in sequencing batch reactor (SBR) system. The results showed that the highest activity decay rates of ammonia- and nitrite-oxidizing bacteria (AOB and NOB) were observed under aerobic starvation condition, followed by anoxic, anaerobic, and alternating anaerobic/aerobic starvation conditions. In the reactivation period, the faster recovery of AOB activity and cell number, relative to NOB, particularly in aerobic case, led to temporary nitrite accumulation. Besides, the sludge settleability rapidly improved (SVI of ~30 mL/g) due to filamentous bacteria suppression under aerobic starvation, while the filaments (e.g. Type 0092) overgrew (SVI of ~250 mL/g) under anoxic starvation, triggering unexpected biomass loss and going against the nitrifying performance recovery of the system. In contrast, alternating anaerobic/aerobic and anaerobic starvations avoid pure aerobic or anoxic starvation condition, effectively maintaining the nitrifying performance and LFB state, and therefore are the best storage strategies for LFB sludge.

Candidatus Kaistella beijingensis sp. nov., Isolated from a Municipal Wastewater Treatment Plant, Is Involved in Sludge Foaming

Biological foaming (or biofoaming) is a frequently occurring problem in wastewater treatment plants (WWTPs) and is attributed to the overwhelming growth of filamentous bulking and foaming bacteria (BFB). Biological foaming has been intensively investigated, with BFB like Microthrix and Skermania having been identified from WWTPs and implicated in foaming. Nevertheless, studies are still needed to improve our understanding of the microbial diversity of WWTP biofoams and how microbial activities contribute to foaming. In this study, sludge foaming at the Qinghe WWTP of China was monitored, and sludge foams were investigated using culture-dependent and culture-independent microbiological methods. The foam microbiomes exhibited high abundances of Skermania, Mycobacterium, Flavobacteriales, and Kaistella. A previously unknown bacterium, Candidatus Kaistella beijingensis, was cultivated from foams, its genome was sequenced, and it was phenotypically characterized. Ca. K. beijingensis exhibits hydrophobic cell surfaces, produces extracellular polymeric substances (EPS), and metabolizes lipids. Ca. K. beijingensis abundances were proportional to EPS levels in foams. Several proteins encoded by the Ca. K. beijingensis genome were identified from EPS that was extracted from sludge foams. Ca. K. beijingensis populations accounted for 4 to 6% of the total bacterial populations in sludge foam samples within the Qinghe WWTP, although their abundances were higher in spring than in other seasons. Cooccurrence analysis indicated that Ca. K. beijingensis was not a core node among the WWTP community network, but its abundances were negatively correlated with those of the well-studied BFB Skermania piniformis among cross-season Qinghe WWTP communities. IMPORTANCE Biological foaming, also known as scumming, is a sludge separation problem that has become the subject of major concern for long-term stable activated sludge operation in decades. Biological foaming was considered induced by foaming bacteria. However, the occurrence and deterioration of foaming in many WWTPs are still not completely understood. Cultivation and characterization of the enriched bacteria in foaming are critical to understand their genetic, physiological, phylogenetic, and ecological traits, as well as to improve the understanding of their relationships with foaming and performance of WWTPs.

Formation of filamentous fungal pellets in aerobic granular sludge via reducing temperature and dissolved oxygen: Characteristics of filamentous fungi and denitrification performance

A lab-scale sequencing batch reactor (SBR) using glucose as carbon source was operated for 500 days to investigate the formation of filamentous organisms and their function on stability of AGS system. After 250 days' stable operation under conditions of 25 ± 2 °C and dissolved oxygen (DO) of 4-5 mg/L (stage I), the temperature and DO were reduced to 10 ± 2 °C and DO of 1-2 mg/L until 280 days (stage II), to induce the growth of filamentous microorganisms. After that until 500 days (stage III), overgrowth of filamentous microorganisms with relative abundances of up to 19.46%, formation of black filamentous fungal pellets, and reconstruction of AGS granules were observed in turn. The relation between settling of AGS (SVI 30-72 mL/g) and filamentous microorganisms was revealed. Filamentous pellets were purified and identified as fungal Bradymyces and Knufia, with stronger denitrification performance on nitrite than nitrate. The results indicated that filamentous fungal pellets contributed to good sludge settling performance and promoted the denitrification process in AGS.

Low Global Diversity of Candidatus Microthrix, a Troublesome Filamentous Organism in Full-Scale WWTPs

Candidatus Microthrix is one of the most common bulking filamentous microorganisms found in activated sludge wastewater treatment plants (WWTPs) across the globe. One species, Ca. M. parvicella, is frequently observed, but global genus diversity, as well as important aspects of its ecology and physiology, are still unknown. Here, we use the MiDAS ecosystem-specific 16S rRNA gene database in combination with amplicon sequencing of Danish and global WWTPs to investigate Ca. Microthrix spp. diversity, distribution, and factors affecting their global presence. Only two species were abundant across the world confirming low diversity of the genus: the dominant Ca. M. parvicella and an unknown species typically present along with Ca. M. parvicella, although usually in lower abundances. Both species were mostly found in Europe at low-to-moderate temperatures and their growth was favored in municipal WWTPs with advanced process designs. As no isolate is available for the novel species, we propose the name "Candidatus Microthrix subdominans." Ten high-quality metagenome-assembled genomes recovered from Danish WWTPs, including 6 representing the novel Ca. M. subdominans, demonstrated high genetic similarity between the two species with a likely preference for lipids, a putative capability to reduce nitrate and nitrite, and the potential to store lipids and poly-P. Ca. M. subdominans had a potentially more versatile metabolism including additional sugar transporters, higher oxygen tolerance, and the potential to use carbon monoxide as energy source. Newly designed fluorescence in situ hybridization probes revealed similar filamentous morphology for both species. Raman microspectroscopy was used to quantify the in situ levels of intracellular poly-P. Despite the observed similarities in their physiology (both by genomes and in situ), the two species showed different seasonal dynamics in Danish WWTPs through a 13-years survey, possibly indicating occupation of slightly different niches. The genomic information provides the basis for future research into in situ gene expression and regulation, while the new FISH probes provide a useful tool for further characterization in situ. This study is an important step toward understanding the ecology of Ca. Microthrix in WWTPs, which may eventually lead to optimization of control strategies for its growth in this ecosystem.

Nitrification characteristics of long-term idle aerobic activated sludge during domestication

Nitrite accumulation usually occurred when domesticating the idle aerobic activated sludge. A sequencing batch reactor (SBR) was used to investigate whether the short-cut nitrification sludge could be cultivated using the idle sludge as inoculated sludge. The results showed that the nitrification process consisted of three stages. In the first stage, the activity of ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) were very low with almost no nitrification performance. In the second stage, the activity of AOB started to recover with the effluent NH₄⁺-N gradually decreased to 0.29 mg L^-1, while NOB was alternately inhibited by free ammonia (FA), free nitrous acid (FNA), and nitrite. The effluent NO_x^--N was mainly NO₂^--N with an average nitrite accumulation ratio of 74.00%. In the third stage, the nitrification altered from short-cut nitrification to complete nitrification, and the nitrification kinetics of AOB and NOB were both well-fitted to the Monod equation (R² > 0.92). The variations of effluent pH and ORP between cycles could indicate the recovery stage of the nitrifying ability. Through monitoring the curves of effluent pH and ORP, when the domestication process is between the pH peak and ORP plateau, the short-cut nitrification sludge could be cultivated. This study revealed the mechanism of nitrite accumulation during the domestication of long-term idle aerobic activated sludge, and established a control strategy to accelerate the domestication.

Use of sodium chloride to rapidly restore polyhydroxyalkanoates production from filamentous bulking without polyhydroxyalkanoates productivity impairment

Occurrence of filamentous bulking would lead to excess biomass washout to fail the polyhydroxyalkanoate (PHA) production process. A strategy using sodium chloride (NaCl) addition to enhance sludge settleability so that high PHA productivity could be retained was tested in two sequencing batch reactors (SBR #1 and #2) fed with different organic acid mixtures but at identical NaCl gradients (0, 5 and 10 g/L). Significant improved sludge settleability was observed at 10 g/L NaCl regardless of occurrence of filamentous bulking. The NaCl addition strategy suppressed the growth of principal filamentous bacterium, Meganema, and enriched the PHA producers (Paracoccus and Thauera) to reach enhanced PHA productivities of 0.244-0.298 g/L^-1 d^-1 for the present studied system.

Exploring the operating factors controlling Kouleothrix (type 1851), the dominant filamentous bacterial population, in a full-scale A2O plant

This study reveals that the abundance of the filament Kouleothrix (Eikelboom type 1851) correlated positively with poor settleability of activated sludge biomass in a Japanese full-scale nutrient removal wastewater treatment plant sampled over a one-year period. 16S rRNA amplicon sequence data confirmed that Kouleothrix was the dominant filament in the plant, with a relative abundance of 3.06% positively correlated with sludge volume index (SVI) (R = 0.691). Moreover, Kouleothrix (type 1851) appeared to form interfloc bridges, typical of bulking sludge, regardless of season. Together with earlier studies that indicated the responsibility of Kouleothrix (type 1851) on bulking events, these data suggest that their high relative abundances alone may be responsible for sludge bulking. 16S rRNA qPCR data for this filament showed changes in its relative abundance correlated with changes in several operational parameters, including mixed liquor temperature, sludge retention time, and suspended solids concentration, and it may be that manipulating these may help control Kouleothrix bulking.

Foams in Wastewater Treatment Plants: From Causes to Control Methods

The formation of persistent foams can be a critical problem in wastewater treatment plants (WWTPs) as it could lead to a series of operational problems, especially the reduction of the overall system performance. To date, the effects of foaming in the WWTPs are a problem that is currently very common and shared, but which to date is treated mainly only at the management level and still too little studied through a globally shared scientific method: the complexity of the phenomenon and the systems have led to numerous partially contradictory descriptions and hypotheses over the years. The goal must be to suggest future research directions and indicate promising strategies to prevent or control the formation of foams in WWTPs. This study examines and investigates the problem of foams by a methodological approach of research through a review on the state of the art: the factors influencing the formation of foams are described first (such as surfactants and/or extracellular polymeric substances (EPSs)), then the known methods for the evaluation of foaming, both direct and indirect, are presented, with the aim of identifying the correct and best (from the management point of view) control and/or prevention strategies to be applied in the future in WWTPs.

Factors influencing Candidatus Microthrix parvicella growth and specific filamentous bulking control: A review

Candidatus Microthrix parvicella has been frequently detected as the dominant filamentous bacteria in bulking sludge and thus seriously affects the stable operation of activated sludge processes. The extremely low growth rate of Ca. M. parvicella and its sensitivity to environmental variations greatly limit the development of effective techniques to control filamentous bulking. Based on previous investigations, a variety of restrictive substrates, operating and culture conditions, environmental factors and other potential inhibitors have varying degrees of impact on the growth of this microorganism. This review systematically summarizes the key factors affecting Ca. M. parvicella growth with a focus on the influencing mechanism. Recent filamentous bulking control strategies are also critically reviewed and discussed. Additionally, research needs for the next few years are proposed with the aim of establishing effective and specific control strategies for filamentous sludge bulking.

Efficient municipal wastewater treatment by oxidation ditch process at low temperature: Bacterial community structure in activated sludge

Temperature is a key element affecting the activity of microorganisms in activated sludge. Low water temperature generally leads to decreasing wastewater treatment efficiency and destroying sludge settleability. In this study, activated sludge samples from a municipal wastewater treatment plant (WWTP) implementing oxidation ditch process was used to investigate the bacterial community characteristics of a system that operates well in a cold region (Xinjiang, China) by high-throughput 16S rRNA gene sequencing. The results showed that the influent temperature was 7-12 °C in winter and 13-17 °C in summer, while the sludge volume index (SVI) of samples was between 51 and 74 mL/g. The average removal efficiencies for chemical oxygen demand (COD), biochemical oxygen demand (BOD₅), suspended solid (SS), ammonia nitrogen (NH₄⁺-N), total nitrogen (TN), and total phosphorus (TP) were 94%, 95%, 95%, 91%, 73% and 89%, respectively. The bacteria were distributed in 32 phyla and 559 genera. The dominant phyla were Proteobacteria (28.85-48.45%), Bacteroidetes (20.00-31.22%), Chloroflexi (3.59-12.23%), Actinobacteria (1.58-15.54%) and Firmicutes (1.38-10.49%). The dominant genera were Saprospiraceae_norank (4.41-12.23%), Comamonadaceae_unclassified (3.82-8.83%), Anaerolineaceae_norank (1.39-9.35%), Dokdonella (1.13-11.26%), Candidatus_Microthrix (0.26-7.50%), Flavobacterium (0.32-8.14%), Ferribacterium (0.36-5.19%) and Nitrospira (0.084-5.37%), which were different from those found in warm-region WWTPs. Contrary to previous studies, the relative abundance of ammonia-oxidizing bacteria (AOB; Nitrosomonas and Nitrosomonadaceae) and nitrite-oxidizing bacteria (NOB; Nitrospira) increased when the temperature decreased. The successful operation of this WWTP suggests that cold-region WWTPs can achieve good pollutants removal efficiency by simultaneously maintaining an ultra-low sludge load and high dissolved oxygen concentration in the oxidation ditch. The findings of this study provide fundamental knowledge required for an efficient and stable operation of WWTPs in cold regions.

A comprehensive comparison between non-bulking and bulking aerobic granular sludge in microbial communities

Filamentous sludge bulking poses great threats to operational stability of aerobic granular sludge. Exploration of the microbial community aids knowledge of the causative factors to sludge bulking and guides directions for corresponding actions for prevention and controlling. Detailed changes of bacterial community within the non-bulking and bulking were performed and compared with a non-specific method through 1‰ (v/v) hydrogen peroxide (H₂O₂) addition. Results revealed that non-bulking/bulking granules maintained effective carbon and nitrogen removal, while bulking completely deteriorated enhanced biological phosphorus removal (EBPR). Excess extracellular polymeric substances (EPS) especially polysaccharide (PS) were directly linked with sludge bulking and abundant PS contributed to subsequent granular re-stability. Filamentous bulking dramatically altered the bacterial populations and 1‰ H₂O₂ effectively controlled bulking by eliminating causative filaments Singulisphaera and Thiothrix. Together, this study provides new insights into the non-bulking/bulking granules and could direct the prevention and control of filamentous bulking in aerobic granules.

Abundance of total and metabolically active Candidatus Microthrix and fungal populations in three full-scale wastewater treatment plants

The abundances of total and metabolically active populations of Candidatus Microthrix and Fungi were evaluated by quantitative PCR (qPCR) and retrotranscribed qPCR of ribosomal molecular markers in three different full-scale wastewater treatment plants (WWTPs), in absence of bulking/foaming episodes. Significant differences of the abundance of rDNAs and rRNAs of Candidatus Microthrix and Fungi were observed among the three WWTPs. The average relative abundances of 16S rDNA copies of Candidatus Microthrix to those of Bacteria ranged 3.4-8.9%. Biota-environment analysis (BIO-ENV) demonstrated that the number of copies of both 16S rDNA and rRNA of Candidatus Microthrix increased at longer hydraulic and solids' retention times and with higher nitrate concentrations in the activated sludge. The abundance of Candidatus Microthrix correlated strongly and positively with the removal efficiencies of organic matter and total nitrogen in the tested WWTPs, highlighting the role of these particular microbial group in the performance of these engineered systems.

The microbial community in filamentous bulking sludge with the ultra-low sludge loading and long sludge retention time in oxidation ditch

Sludge bulking is a major problem that restricts the development of the activated sludge process. The microbial community responsible for sludge bulking varies depending on water quality and operational conditions. This study analysed the microbial community of bulking sludge in oxidation ditch with ultra-low sludge loading and long sludge retention time using high-throughput sequencing. The study found that the relative abundance of bacterial genus Saprospiraceae_norank was the highest in bulking sludge, reaching 13.39-28.83%, followed by Comamonadaceae_unclassified, Ardenticatenia_norank and Tetrasphaera, with the relative abundance of 4.59-11.08%, 0.52-16.60% and 0.17-8.92% respectively. In contrast, the relative abundance of bacteria that easily caused sludge bulking including Microthrix (0.54-2.47%), Trichococcus (0.32-1.71%), Gordonia (0.14-1.28%), and Thiothrix (0.01-0.06%) were relatively low. Saprospiraceae_norank was predominant and induced sludge bulking in oxidation ditch. The relative abundance of fungal genus Trichosporon was the highest in bulking sludge, reaching 16.95-24.98%, while other fungal genera were Saccharomycetales_unclassified (5.59-14.55%), Ascomycota_norank (1.45-13.51%), Galactomyces (5.23-11.23%), and Debaryomyces (7.69-9.42%), whereas Trichosporon was the dominant fungal genus in bulking sludge. This study reported that excessive Saprospiraceae_norank can induce sludge bulking for the first time, which provides important knowledge to control sludge bulking.

Rapid control of activated sludge bulking and simultaneous acceleration of aerobic granulation by adding intact aerobic granular sludge

The feasibility of rapidly controlling activated sludge bulking and accelerating aerobic sludge granulation was evaluated by adding intact aerobic granular sludge (AGS) to the bulking activated sludge (BAS) reactor. Two ratios of AGS to BAS (0.2 in the first reactor (R1), and 0.4 in the second reactor (R2)) were tested. The results indicate that the addition of AGS immediately improved the settling ability of BAS (sludge volume index at 30 min (SVI₃₀) in R1 and R2 decreased from 173.1 mL/g to 130.8 and 91.3 mL/g, respectively) and gradually increased the biomass concentration (mixed liquor suspended solids (MLSS) in R1 and R2 increased to 4722 and 5190 mg/L, respectively), thus resolving the sludge bulking problem. Meanwhile, adding AGS not only promoted the BAS growth in aggregates, but also facilitated the selection of well-settling aggregates at an early stage. Consequently, the granulation process was significantly accelerated. The granulation time in R1 and R2 was 14 and 10 days, respectively, indicating that the higher ratio of AGS to BAS can result in the faster granulation. Partial nitrification could be maintained during the BAS granulation process when the initial inoculation of nitritation sludge was large enough. Additionally, the microbial community changed during the BAS granulation process. The genera Thauera and Zoogloea belonging to family Rhodobacteraceae were speculated to play an important role in the BAS granulation.

Factors affecting SVI in small scale WWTPs

This paper analyses factors associated with bulking in 195 small scale wastewater treatment plants (WWTPs) in Estonia. Operational data from each plant were collected and analysed statistically. The key factors associated with bulking were infiltration into sewage pipes, the type and purpose of process reactor, operational practices and influent characteristics. Both anaerobic fraction and volumetric fraction of the anaerobic reactor compared to the aerobic reactor resulted in a positive correlation with sludge volume index (SVI) <150 ml/g values. Good operation and maintenance practice as well as an operator's competence play a crucial role in bulking prevention. Using the 30 minute settling test (V₃₀) as the single process control parameter can mislead an operator's judgement in process control strategies and cause effluent violations. Misjudgements in process control decisions can lead to unwanted conditions in small WWTPs (e.g. excessive chemical addition favoured bulking). Use of instrumentation, control and automation helped to keep the process conditions more stable and reduce the probability of bulking. Analyses of variance showed that the factors associated with Microthrix parvicella growth were long solids retention time (SRT), low food-to-microorganism ratio (F/M) and lack of carbon content compared against nitrogen and phosphorus contents.

Monitoring, isolation and characterization of Microthrix parvicella strains from a Chinese wastewater treatment plant

Microthrix parvicella is a filamentous bacterium that frequently causes severe bulking events in wastewater treatment plants (WWTPs) worldwide. In this study, sludge properties and dynamics of filamentous bacteria in a Beijing WWTP seasonally suffering from M. parvicella bulking were continuously monitored over a duration of 15 months, and the correlations between M. parvicella and operating parameters were evaluated. The predominance of M. parvicella was observed at low temperatures (14-18.8 °C) with the relative abundance of around 30% (estimated by both qPCR and FISH analysis). Using micromanipulation technology, 545 filaments of M. parvicella were micromanipulated from bulking sludge (SVI > 180 mL g^-1) on six different media. After 3-month purification and enrichment, six strains, phylogenetically closely related to Candidatus Microthrix parvicella, were successfully acquired on R₂A medium (20 °C) in pure cultures. Considering the limitation and extremely slow growth rate of M. parvicella filaments, newly isolated strains represent valuable sources for further investigations on the physiology and behavior of this filamentous bacterium, with the focus on the establishment of bulking control strategy.