Photocatalytic reduction of Uranium(VI) under visible light with Sn-doped In2S3 microspheres

Exploring Electron Transfer Mechanism in Synergistic Interactional Reduced Polyoxometalate-Based Cu(I)-Organic Framework for Photocatalytic Removal of U(VI)

Photocatalytic reduction of U(VI) is a promising method for removing uranium containing pollutants. However, using polyoxometalate-based metal-organic frameworks (POMOFs) for photoreduction of U(VI) is rare, and the relevant charge transfer pathway is also not yet clear. In this article, we demonstrate a highly efficient strategy and revealed a clearly electron transfer pathway for the photoreduction of U(VI) with 99% removal efficiency by using a novel POMOF, [Cu(4,4'-bipy)]5·{AsMo4VMo6VIV2VO40(VIVO)[VIVO(H2O)]}·2H2O (1), as catalyst. The POMOF catalyst was constructed by the connection of reduced {AsMo10V4} clusters and Cu(I)-MOF chains through Cu-O coordination bonds, which exhibits a broader and stronger light absorption capacity due to the presence of reduced {AsMo10V4} clusters. Significantly, the transition of electrons from Cu(I)-MOF to {AsMo10V4} clusters (Cu → Mo/V) greatly inhibits the recombination of photogenerated carriers, thereby advancing electron transfer. More importantly, the {AsMo10V4} clusters are not only adsorption sites but also catalytically active sites. This causes the fast transfer of photogenerated electrons from Mo/V to UO22+(Mo/V → O → U) via the surface oxygen atoms. The shorter electron transmission distance between catalytic active sites and UO22+ achieves faster and more effective electron transport. All in all, the highly effective photocatalytic removal of U(VI) using the POMOF as a catalyst is predominantly due to the synergistic interaction between Cu(I)-MOFs and reduced {AsMo10V4} clusters.

Efficient removal of U(VI) from aqueous solution by CNN/UiO-66 under simulated sunlight irradiation: the synergy of adsorption and photocatalysis

The reduction of soluble U(VI) to insoluble and less toxic U(IV) by photocatalysis is an effective method to control uranium contamination. The graphitic carbon nitride nanosheet (CNN)/UiO-66 composites (CNNU) were prepared by thermal polymerization and solvothermal methods for the removal of U(VI). The morphology, crystal structure and optical properties of composites were analyzed by SEM, XRD, BET, UV-DRS, PL and EIS. The results showed the introduction of UiO-66 increased the specific surface of CNN from 9.07 m2/g to 46.24 m2/g, and effectively suppressed the recombination of photogenerated electrons and holes and improved the photocatalytic activity. The U(VI) removal capacity by adsorption and photocatalysis of CNNU was reached 779.47 mg/g, which significantly higher than that of adsorption (478.38 mg/g). The adsorption process was found to conform to the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, U(VI) adsorbed on the CNNU was reduced to U(IV) via e- and ·O2- generated in the photocatalytic process. Therefore, this outstanding performance of CNNU in U(VI) removal is attributed to the synergistic effect of adsorption and photocatalytic reduction.

Sulfur vacancy-enhanced In2S3-x hollow microtubes for photocatalytic Cr (VI) and tetracycline removal

Morphological regulation and defect engineering are efficient methods for photocatalytic technology by improving photon absorption and electron dissociation. Herein, In2S3-x hollow microtubes with S-vacancies (MIS) were fabricated via a simple solvothermal reaction using In-based metal-organic frameworks (In-MOFs) as a precursor. Experimental results demonstrate that the hollow structure and optimal S-vacancies can jointly accelerate the photocatalytic reaction, attributed to a larger specific surface area, more active sites, and faster electron transfer efficiency. The champion MIS(2) displayed significantly better photocatalytic activity for Cr(VI) reduction and tetracycline (TC) degradation. The Cr(VI) reduction rate by MIS(2) is 3.67 and 2.82 times higher than those of optimal In2S3 template-free (HIS(2)) and MIS(1) with poor S-vacancies, respectively. The removal efficiency of TC by MIS(2) is 1.37 and 1.15 times higher than those of HIS(2) and MIS(1). Further integration of MIS(2) with aerogel simplifies the recovery process significantly.

Spatial charge separated two-dimensional/two-dimensional Cu-In2S3/CdS heterojunction for boosting photocatalytic hydrogen production

Two-dimensional (2D) beta indium sulfide (β-In2S3) shows great potential in photocatalytic hydrogen production due to its broad-spectrum response, relatively negative conduction band edge, high carrier mobility and low toxicity. However, the high charge recombination rate limits the application of In2S3. Here, we in-situ grew 2D cadmium sulfide (CdS) on the surface of In2S3 doped with copper ions (Cu2+) to construct a heterojunction photocatalyst that suppresses charge recombination. The in-situ grown method and shared sulfur composition were conducive to forming the efficient interface contact between In2S3 and CdS, promoting charge transfer and showing the high spatial charge separation rate, resulting in a hydrogen production rate of 868 µmol g-1h-1. The induced Cu2+ extended the light absorption range and stabilized the photocatalyst. By creating stable 2D/2D heterojunction photocatalysts with high charge separation efficiency, this work opens new possibilities for applying In2S3 materials in photocatalytic hydrogen production.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

High performance sulfur/carbon cathode for Na-S battery enabled by electrocatalytic effect of Sn-doped In2S3

Room-temperature sodium-sulfur (RT Na-S) batteries have been attracting enormous interests due to their low-cost, high capacity and environmental benignity. However, the shuttle effect and the sluggish electrochemical reaction activity of sodium polysulfides (NaPSs) seriously restrict their practical application. To solve these issues, we rationally designed an advanced Sn-doped In₂S₃/S/C cathode for RT Na-S batteries by magnetron sputtering in this work, which exhibited a high reversible capacity (1663.5 mAh g^-1 at 0.1 A g^-1) and excellent cycling performance (902.9 mAh g^-1 after 50 cycles). The in situ electrochemical impedance spectroscopy indicated that the Sn-doped In₂S₃ coating can accelerate charge-transfer kinetics and facilitate the diffusion of Na⁺. Furthermore, theoretical calculation revealed that doping of Sn into In₂S₃ can reduce the energy band gap, thus accelerating the electron transfer and promoting the electrochemical conversion of active species. It is demonstrated that adjusting the electronic structure is a reliable method to improve the electrocatalytic effect of catalyst and significantly improve the performance of S cathode in RT Na-S batteries.

Radioactive Wastewater Treatment Technologies: A Review

With the wide application of nuclear energy, the problem of radioactive pollution has attracted worldwide attention, and the research on the treatment of radioactive wastewater is imminent. How to treat radioactive wastewater deeply and efficiently has become the most critical issue in the development of nuclear energy technology. The radioactive wastewater produced after using nuclear technology has the characteristics of many kinds, high concentration, and large quantity. Therefore, it is of great significance to study the treatment technology of radioactive wastewater in reprocessing plants. The process flow and waste liquid types of the post-treatment plant are reviewed. The commonly used evaporation concentration, adsorption, precipitation, ion exchange, biotechnology, membrane separation, and photocatalysis are summarized. The basic principles and technological characteristics of them are introduced. The advantages and disadvantages of different single and combined processes are compared, and the development trend of future processing technology is prospected.

One-pot solvothermal synthesis of flower-like Fe-doped In2S3/Fe3S4 S-scheme hetero-microspheres with enhanced interfacial electric field and boosted visible-light-driven CO2 reduction

S-scheme heterojunctions hold great potential for CO2 photoreduction into solar fuels, but their activities are severely limited by the low efficiency of interfacial charge transfer. In this work, a facile one-pot solvothermal reaction has been developed to dope Fe into flower-like In2S3/Fe3S4 hetero-microspheres (Fe-In2S3/Fe3S4 HMSs), which are demonstrated as an efficient S-scheme photocatalyst for visible-light-driven CO2 photoreduction. The doping of Fe not only reduces the bandgap of In2S3 and thus extends the optical response to the visible-light region, but also increases the densities of donors and sulfur vacancies, which leads to an elevated Fermi level (Ef). The difference of Ef between In2S3 and Fe3S4 is enlarged and their band bending at the interface is therefore enhanced, which results in promoted carriers transfer in the S-scheme pathway due to the reinforced interfacial electric field. Moreover, Fe-doped In2S3 reduces the formation energy of the *CO intermediate, which thermodynamically favors the CO evolution at the surface. As a result, the Fe-In2S3/Fe3S4 HMSs exhibit a significantly boosted CO2 photoreduction activity in comparison with bare In2S3 and Fe-In2S3 samples. This work demonstrates the great potential of heteroatom-engineered S-scheme photocatalysts for CO2 photoreduction.

Cobalt doped titania-carbon nanosheets with induced oxygen vacancies for photocatalytic degradation of uranium complexes in radioactive wastes

The photocatalytic degradation of uranium complexes is considered among the most efficient techniques for the efficient removal of uranium ions/complexes from radioactive wastewater. Described here is a nanostructured photocatalyst based on a cobalt-doped TiO₂ composite with induced oxygen vacancies (Co@TiO₂-C) for the photocatalytic removal of uranium complexes from contaminated water. The synergy between oxygen vacancies and Co-doping produced a material with a 1.7 eV bandgap, while the carbon network facilitates electron movement and hinders the e-h recombination. As a result, the new photocatalyst enables the decomposition of uranium-arsenazo iii complexes (U-ARZ3), followed by photocatalytic reduction of hexavalent uranium to insoluble tetravalent uranium. Combined with the nanosheet structure's high surface area, the photocatalytic decomposition, reduction efficiency, and kinetics were significantly enhanced, achieving almost complete U(vi) removal in less than 20 minutes from solution with a concentration as high as 1000 mL g^-1. Moreover, the designed photocatalyst exhibits excellent stability and reusability without decreasing the photocatalytic performance after 5 cycles.

Increasing electron density by surface plasmon resonance for enhanced photocatalytic CO2 reduction

The photocatalytic CO₂ reduction reaction is a multi-electron process, which is greatly affected by the surface electron density. In this work, we synthesize Ag clusters supported on In₂O₃ plasmonic photocatalysts. The Ag-In₂O₃ compounds show remarkedly enhanced photocatalytic activity for CO₂ conversion to CO compared to pristine In₂O₃. In the absence of any co-catalyst or sacrificial agent, the CO evolution rate of optimal Ag-In₂O₃-10 is 1.56 μmol/g/h, achieving 5.38-folds higher than that of In₂O₃ (0.29 μmol/g/h). Experimental verification and DFT calculation demonstrate that electrons transfer from Ag clusters to In₂O₃ on Ag-In₂O₃ compounds. In Ag-In₂O₃ compounds, Ag clusters serving as electron donators owing to the SPR behaviour are not helpful to decline photo-induced charge recomnation rate, but can provide more electron for photocatalytic reaction. Overall, the Ag clusters promote visible-light absorption and accelerate photocatalytic reaction kinetic for In₂O₃, resulting in the photocatalytic activity enhancement of Ag-In₂O₃ compounds. This work puts insight into the function of plasmonic metal on enhancing photocatalysis performance, and provides a feasible strategy to design and fabricate efficient plasmonic photocatalysts.

Efficient charge separation in sulfur doped AgFeO2 photocatalyst for enhanced photocatalytic U(VI) reduction: The role of doping and mechanism insights

Photocatalytic reduction of U(VI) in aqueous solutions has been considered as an efficient and promising technology to solve radioactive U pollution. In this work, density functional theory (DFT) calculations were firstly employed to optimize and compare the adsorption configurations combined uranium with four given photocatalysts, then their adsorption energies were - 0.97 eV for AgFeO₂, - 1.15 eV for Zn doped AgFeO₂, - 1.73 eV for Cu doped AgFeO₂ and - 2.66 eV for S doped AgFeO₂, respectively, indicating the sulfur doping plays a major role in U(VI) photoreduction. Herein, a visible light responsive efficient sulfur doped AgFeO₂ photocatalyst (S doped AgFeO₂) was synthesized and utilized to photocatalytic reduction of U(VI) in aqueous solutions. According to XRD, XPS and TEM analysis, the sulfur was successfully doped in AgFeO₂ via the hydrothermal method. The batch experimental showed that S doping enhanced the U(VI) photoreduction activity of AgFeO₂, and the S-AFO-3 photocatalyst exhibited the highest photocatalytic activity (92.57%), which was 1.5 times than that of pure AgFeO₂. ESR, PL and DFT results demonstrated that the enhancement of adsorbed U(VI) photoreduction was attributed to the own unique effect of oxygen vacancy defects and efficient charge separation of S doped AgFeO₂ photocatalyst. Due to its higher adsorption energies, fast-U(VI) photoreduction rate and superior chemical stability, the sulfur doped AgFeO₂ photocatalyst is hoped for water remediation containing U(VI) wastewater.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Ultrasensitive photoelectrochemical immunosensor based on Dual-Photosensitive electrodes

In the study, a photoelectrochemical (PEC) immunosensor based on dual-photosensitive electrodes was developed for cardiac troponin I (cTnI) detection. The sensing photocathode with biometric functions was prepared by CuInS₂ and narrow band gap semiconductor In₂S₃ as the counter electrode. In this way, the separation of photoanode and biometric events was realized, and the ability of stability of the immunosensor could be effectively improved. Moreover, the attraction to the photogenerated electrons (e^-) from photoanode would be increased by the abundant holes (h⁺) of photocathode, under the radiation of light. This tremendously improves the photoelectric response, which further improves the sensitivity of the immunosensor. The controllable-synthesis uncomplicated photoelectric material not only accords with the principle of simplicity of electrode modification but also makes the immunosensor more conducive to the practical application. Additionally, even in the case of zero bias voltage, the constructed PEC immunosensor can operate with high efficiency, namely, self-powered. The immunosensor could provide the quantitative readout photocurrent to a concentration of cTnI in the range of 0.10 pg/mL to 1.00 μg/mL and the detection limit was 0.0113 pg/mL under the optimal experimental conditions. With favorable performance in terms of anti-interference, stability, specificity and reproducibility, this immunosensor will provide new prospects for general PEC bioanalysis development.

Visible light driven photocatalytic removal of uranium(VI) in strongly acidic solution

Photocatalytic reduction and removal of toxic uranium(VI) from aqueous solution is a highly economic, non-pollutant and efficient strategy. However, most uranium containing waste waters are highly acidic, but current photocatalysts are still restricted in slightly acidic or neutral media (pH ≥ 4). Herein, a conjugated microporous polymer (CMP), pTTT-Ben, was used for visible light driven photocatalytic reduction of U(VI) in highly acidic condition (pH = 1). A high uranium removal capacity (4710 mg/g) was achieved. The structural information of reduced uranium was investigated by X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS), revealing the amorphous U(IV) hydrate complex, with an additional interaction between U(IV) and nitrogen atoms on pTTT-Ben. In addition, pTTT-Ben also showed excellent photocatalytic U(VI) reduction performance under natural sunlight irradiation.

Flower-like Bi2S3-In2S3 heterojunction for efficient solar light induced photoreduction of Cr(VI)

To develop Bi₂S₃-based heterojunction for efficient solar light induced photoreduction of Cr(VI), flower-like Bi₂S₃-In₂S₃ composites consisted of nanorods were prepared via a microwave-assisted hydrothermal route. In contrast with pure Bi₂S₃, Bi₂S₃-In₂S₃ composites exhibited the enhanced photoreduction activity while the decreased adsorption capacity for Cr(VI) removal. The best removal efficiency of 70 mg L^-1 Cr(VI) solution (99.86%) was achieved by the optimal 3-Bi₂S₃-In₂S₃ with a Bi/In molar ratio of 4:1 within 140 min. It's ascribed to the narrow band gap for strengthened visible-light response, the tight interface between Bi₂S₃ and In₂S₃ for rapid transfer and separation of charge carriers, and the enough S vacancies for highly-efficient active sites of adsorption-photoreduction. However, the long-term photo-corrosion resulted in the slightly inferior reusability of 3-Bi₂S₃-In₂S₃ under solar light irradiation after five cycles.

A nappies management by-product for the treatment of uranium-contaminated waters

The direct disposal of municipal solid waste such as nappies to the environment may create serious pollution problems. Based on the circular economy and waste management concepts, the conversion of nappies and/or their ingredients (such as super absorbent polymer (SAP)) to high added value products is of great importance. In this work, a modified SAP (MSAP) was examined as an adsorbent for treatment of contaminated waters and uranium recovery. Batch experiments and spectroscopic techniques were used to examine the effect of various parameters (pH, contact time, temperature, initial concentration, and ionic strength), and the mechanism of adsorption U(VI) and desorption process. The U(VI) concentration was determined by alpha spectroscopy after addition of ²³²U standard tracer solution to account for possible interferences during electrodeposition and alpha particle counting. The maximum adsorption monolayer capacity was found to be 217.4 mg/g at pH 4.0 and at 298 K. The adsorption of U(VI) on MSAP seems to occur mainly via the formation of inner-sphere surface complexes between U(VI) and the carboxylic surface moieties of MSAP. The MSAP could satisfactorily be regenerated with 0.1 M Na₂CO₃ (>90%) and it also shows a promising applicability to real wastewaters contaminated with U(VI).

Synthesis of g-C3N4/TiO2 nanostructures for enhanced photocatalytic reduction of U(vi) in water

Photocatalytic technology is a valid solution for the remediation of wastewater containing uranium. In this study, the synthesis of Z-scheme g-C₃N₄/TiO₂ catalysts was made by a thermal synthetic approach for photocatalytic U(vi) reduction. The characterization results revealed the successful synthesis of g-C₃N₄/TiO₂ nanostructures. The g-C₃N₄ surface was uniformly coated with TiO₂ nanoparticles. The depletion of U(vi) in water evaluated the photocatalytic activity of g-C₃N₄/TiO₂ under UV light irradiation. The photocatalytic tests showed that g-C₃N₄/TiO₂ exhibited more effective photocatalytic activity than the raw materials (1.64 and 56.97 times higher than TiO₂(P25) and g-C₃N₄, respectively). Besides, a pseudo-first-order model was followed by the experimental kinetic data for the photocatalytic process. Moreover, g-C₃N₄/TiO₂ still presented high photocatalytic activity after four reacting cycles. Based on these experiment results, the improved photocatalytic activity could be attributed to the Z-scheme mechanism, which decreased the recombination of photo-produced electrons and holes. The synthesis of these g-C₃N₄/TiO₂ nanomaterials provides a facile and inexpensive method for treating wastewater containing U(vi).

Photocatalytic technology based on g-C₃N₄/TiO₂ is a valid solution for the remediation of wastewater containing uranium.

Construction of a novel 2D–2D heterojunction by coupling a covalent organic framework and In2S3 for photocatalytic removal of organic pollutants with high efficiency

TpPa-1 COF was coupled with an inorganic narrow-band gap semiconductor In2S3 to form a novel 2D–2D heterojunction by a facile hydrothermal method.

Fabrication of the novel Ag-doped SnS2@InVO4 composite with high adsorption-photocatalysis for the removal of uranium (VI)

A novel Ag-doped SnS₂@InVO₄ composite was successfully synthesized for efficient uranium removal from wastewater through a facile hydrothermal method. The structure, morphology and optical property of materials were characterized using various instruments. The results proved that Ag-doped SnS₂@InVO₄ composite presented as hexangular nanosheets with about 4.87 nm pore size and 101.58 m²/g specific surface area. Further characterization demonstrated that photo-adsorption ability of visible light was enhanced and band gap was narrowed. The adsorption kinetics and isotherm of U(VI) on Ag-doped SnS₂@InVO₄ composite could be depicted via the Langmuir model and pseudo-second-order mode, and the maximum adsorption capacity of U(VI) reached 167.79 mg/g. The elimination of U(VI) of as-synthesized composites was studied by a synergy of adsorption and visible-light photocatalysis, and the optimal content of InVO₄ was found to be 2 wt% with the highest removal efficiency of 97.6%. In addition, compared with pure SnS₂ and Ag-doped SnS₂, the Ag-doped SnS₂@InVO₄ composites exhibited superior photocatalytic performance for the conversion of soluble U(VI) to insoluble U(IV) under visible light. The excellent photocatalytic performance was mainly attributed to numerous surface-active sites, strong optical adsorption ability and narrow band gap. Simultaneously, the heterojunction between Ag-doped SnS₂ and InVO₄ promoted the separation and transfer of photoexcited charges. The cyclic experiments indicated the Ag-doped SnS₂@InVO₄ composite remained good structural stability and reusability. Finally, the possible mechanism was discussed based on the experimental analysis.

A novel application of In2S3 for visible-light-driven photocatalytic inactivation of bacteria: Kinetics, stability, toxicity and mechanism

Photocatalytic bacterial inactivation under visible light emerges as a new alternative to control microbial contamination by utilizing free and renewable sunlight. However, the exploration of highly effective and safe visible-light-driven (VLD) photocatalysts remains an important step toward accessing this new technology. Herein, an eco-friendly photocatalyst, namely Indium Sulfide (In₂S₃), was fabricated through a facile hydrothermal method for VLD photocatalytic inactivation of bacteria. The energy band gap of the as-prepared In₂S₃ was measured as 2.25 eV. As expected, the obtained In₂S₃ photocatalyst showed remarkable inactivation efficiency toward E. coli under fluorescent tubes irradiation. The photocatalytic inactivation kinetic was perfectly fitted by a mathematical model for bacteria inactivation. In addition, In₂S₃ exhibited high stability and could be reused. The leakage of In³⁺ was not significant and showed no toxic effect to the bacteria. Based on the results of scavenger study and ESR technology, the dominant reactive species causing In₂S₃ VLD photocatalytic bacterial inactivation were proposed as O₂^-, h⁺, H₂O₂ and e^-, rather than OH. The SEM study suggested that the damages to the intracellular components occurred prior to the destruction of cell wall. This study provides novel application of In₂S₃ for VLD photocatalytic inactivation of bacteria as well as comprehensive insight into the inactivation mechanism.

Matching and adjusting energy band structures of Pd-modified sulphides (ZnS, In2S3 and CuS) and improving the photocatalytic activity of CO2 photoreduction

A series of Pd-modified sulphide photocatalysts (ZnS-PdX%, In₂S₃-PdX% and CuS-PdX%) for the photoreduction of CO₂ were synthesised via a simple hydrothermal method. Here, the introduction of the -S-Pd-S- surface species onto the surface of the sulphides extended the visible light absorption, prolonged the lifetime of photogenerated electrons and suppressed the recombination of the photocarriers. Additionally, the match between the band structure and the redox potential for the photoreduction of CO₂ was improved. As a result, the photocatalytic activity of ZnS-Pd1.5%, In₂S₃-Pd1.5% and CuS-Pd1.5% was enhanced when compared with the results from ZnS, In₂S₃ and CuS photocatalysts. Also, ZnS-Pd1.5%, In₂S₃-Pd1.5% and CuS-Pd1.5% showed different photocatalytic activities due to differences in the matching relationships between the band structure and the redox potential. In this paper, extensive details on adjusting and matching the energy band structures, as well as viable methods for improving photocatalytic performance, are provided.

A self-powered photoelectrochemical cathodic aptasensor for the detection of 17β-estradiol based on FeOOH/In2S3 photoanode

In this work, a novel self-powered photoelectrochemical (PEC) aptasensor integrated photoanode and photocathode for the accurate and selective detection of 17β-estradiol (E₂) was proposed for the first time. FeOOH/In₂S₃ heterojunction was built initially and used as a substitute for platinum (Pt) counter electrode. The matched band gap edge of FeOOH and In₂S₃ facilitated the transfer of photo-generate electrons to photoanode, while the holes left in the valence band of photocathode (CuInS₂) can be attracted by the electrons flowed from the photoanode, which reduced the recombination of electron-hole pairs and promote the cathodic photocurrent. Under optimal conditions, the constructed cathodic aptasensor of E₂ presented linear scope in 10 fg/mL-1 μg/mL with detection limit of 3.65 fg/mL. Besides, the cathodic aptasensor exhibited admiring selectivity, stability and reproducibility. This work verified that the cathodic photocurrent response can be regulated by the corresponding photoanode which provided a new design thought for PEC aptasensor on the basis of p-type semiconductor.

A photoelectrochemical aptasensor for the detection of 17β-estradiol based on In2S3 and CdS co-sensitized cerium doped TiO2

In₂S₃ and CdS co-sensitized Ce doped TiO₂ optimized the transmission path of electrons.

Graphitic carbon nitride-based materials for photocatalytic reduction of U(vi)

This work reports the photocatalytic reduction of U(vi) using g-C₃N₄-based materials and discusses the factors affecting the photocatalytic reduction of U(vi).

Enhanced photoelectrochemical activity of Co-doped β-In2S3nanoflakes as photoanodes for water splitting

This work is primarily focused on indium sulfide (β-In₂S₃) and cobalt (Co)-doped β-In₂S₃ nanoflakes as photoanodes for water oxidation. The incorporation of cobalt introduces new dopant energy levels increasing visible light absorption and leading to improved photo-activity. In addition, cobalt ion centers in β-In₂S₃ act as potential catalytic sites to promote electro-activity. 5 mol% Co-doped β-In₂S₃ nanoflakes when tested for photoelectrochemical water splitting exhibited a photocurrent density of 0.69 mA cm⁻² at 1.23 V, much higher than that of pure β-In₂S₃.

Doped indium sulfide as an efficient photocatalyst for water oxidation.