Dimensionally stable Ti/SnO2-RuO2 composite electrode based highly efficient electrocatalytic degradation of industrial gallic acid effluent

Effect of doping in TiO2/chitosan composite on adsorptive-photocatalytic removal of gallic acid from water

Gallic acid (GA) has emerged as a low biodegradable and high acidity industrial effluent. Due to mutagenic and carcinogenic nature of GA, it becomes essential to remove it from wastewater. Different chemical, physical and biological methods are being used for this purpose. Photocatalytic degradation is found to be promising method. In the present study N-doped titanium oxide and chitosan composites are used for the photodegradation of gallic acid. An attempt has been made to combine C from chitosan with undoped and N-doped TiO2 so as to produce composites that can suppress the electron-hole recombination, and reduce band gap thus enhancing their catalytic and adsorptive properties. The morphology and surface properties of the synthesized material were determined using techniques such as FTIR, XRD, XPS, BET, PL and SEM-EDX. The formation of spherical TiO2 and N-doped TiO2 occurred in anatase phase, over chitosan. The TiO2/chitosan (TC) and N- TiO2/chitosan (NTC) composites exhibited outstanding photodegradation activity 81% and 92.2% for the GA under visible irradiation (λ > 400 nm) at acidic pH. The desired outcomes of the nitrogen and carbon doping in the metal oxide (NTC) include a highly homogenous surface, a lowered band gap, an increase in the material's surface area, improved reusability, and a decrease in photoluminescence, which suggests that the material's electron-hole recombination is delayed. The purpose of the current study is to gain an understanding of how doping (C/N) affects the development of a photocatalyst that may be used to remove GA from industrial effluent.

A hydrogen passivation strategy for the electrocatalytic chlorine evolution reaction on metal-organic frameworks: a theoretical insight

The chlorine evolution reaction (CER) is a crucial solution for treating chlorine-containing wastewater, a type of wastewater generated during the chemical production process. Electrocatalysts applied are mainly dimensionally stable anodes (DSAs) such as precious metals and their oxides. In order to reduce the amounts of rare metals in the catalysts and to improve the catalytic performance, a hydrogen-passivated transition metal site strategy based on a metal-organic framework, TM3(THT)2 (TM = Mn, Fe, Co, Ni, Tc, Ru, Rh, Pd, Re, Os, Ir, Pt), was proposed to force the CER to proceed at the sulfur (S) site. With the help of density functional theory (DFT), the CER process at the transition metal (TM) site and the S site in TM3(THT)2 before and after H passivation has been systematically researched. The results revealed that, for the same catalyst, the catalytic performance for the CER after passivation was significantly improved compared with that before the passivation. The Gibbs free energy of Re3(THT)2 was -0.085 eV after the H passivation. Meanwhile, at an external voltage of 0 V, the theoretical overpotential of the oxygen evolution reaction (OER) was obviously greater than that of the CER. Therefore, excellent activity and selectivity for the CER were demonstrated using the H-passivated Re3(THT)2. Electronic structure analysis revealed that the natural origin of the weak adsorption was the overlap of the p orbital of the S site with the p orbital of Cl, and the overlap area was smaller than the overlap of the d orbital of Re with the p orbital of Cl. To obtain excellent catalytic performance for the CER, the electro zcatalyst should activate Cl while minimizing the adsorption of Cl as much as possible. The strategy of the hydrogen passivation of highly active sites proposed in this article may be an effective means to improve the catalytic performance of metal-organic frameworks for the CER.

Photo-electrochemical activation of persulfate for the simultaneous degradation of microplastics and personal care products

The recent widespread use of microplastics (MPs), especially in pharmaceuticals and personal care products (PPCPs), has caused significant water pollution. This study presents a UV/electrically co-facilitated activated persulfate (PS) system to co-degrade a typical microplastic polyvinyl chloride (PVC) and an organic sunscreen p-aminobenzoic acid (PABA). We investigated the effect of various reaction conditions on the degradation. PVC and PABA degradation was 37% and 99.22%, respectively. Furthermore, we observed alterations in the surface topography and chemical characteristics of PVC throughout degradation. The possible degradation pathways of PVC and PABA were proposed by analyzing the intermediate products and the free radicals generated. This study reveals the co-promoting effect of multiple mechanisms in the activation by ultraviolet light and electricity.

Detection of radicals produced during electro-oxidation of atrazine using commercial DSA®-Cl2 in methanol media: Keys to understand the process

This work reports the radicals detected and identified during the degradation of atrazine in methanol medium in the presence and absence of different proportions of water (0%, 5%, and 10%). The determination of these radicals is an important step to understand the electrolysis processes in methanol medium and contribute to clarify the degradation mechanism. Furthermore, the parameters for the successful removal of the contaminant were optimized and the results showed that the application of the technique led to the removal of nearly 99.8% of atrazine after 1 h of electrolysis. The oxidation kinetics was found to be very fast and most of the atrazine molecule in the medium was degraded in the first hour of electrolysis. The results obtained from a thorough analysis conducted with a view to evaluating the effects of different current densities and initial pH values on atrazine degradation showed that the application of higher current densities resulted in lower energy consumption, as this led to faster removal of atrazine. Additionally, the initial pH of the solution was found to favor the formation of different species of active chlorine. The radicals formed during the electro-oxidation process were detected by electron paramagnetic resonance spectroscopy and include hydroxyl, methoxy and hydroxymethyl. The use of methanol for the degradation of pollutants is a highly promising technique and this work shows that the identification of the different radicals formed in the process can be the key to understanding the degradation mechanism.

Electrocatalytic oxidation of low concentration cefotaxime sodium wastewater using Ti/SnO2-RuO2 electrode: Feasibility analysis and degradation mechanism

In this research, Ti/SnO₂-RuO₂ stable anode was successfully prepared by thermal decomposition method, and low concentration cefotaxime sodium (CFX) was degraded by green and sustainable electrocatalytic oxidation technology. The electrocatalytic activity and stability of the Ti/SnO₂-RuO₂ coating electrode were studied according to the polarization curve of oxygen and chlorine evolution. The effects of current density, initial concentration, pH, electrolyte concentration, and other technological parameters on the degradation efficiency were discussed. Orthogonal experiment results indicated that when the current density was 25 mA cm^-2, concentration of electrolyte was 5 mM and the pH value was 7, the best CFX removal rate of 86.33% could be obtained. The degradation efficiency of electrocatalytic oxidation was discussed through electrochemical analysis. Fourier transform infrared spectroscopy was used to analyze the different inlet and outlet stages before and after the degradation of CFX, and the possible degradation process was discussed. Therefore, the electrocatalytic oxidation of Ti/SnO₂-RuO₂ electrode was a clean and efficient technology, which could be widely used in the treatment of CFX wastewater.

Electrocatalytic oxidation of aromatic amine (4-aminobiphenyl): Kinetics and transformation products with mechanistic approach

Electrocatalytic oxidation (EO) of carcinogenic 4-aminobiphenyl (4-ABP) aromatic amine was performed using Ti-RuO₂ anodes. Current (I), pH, electrolysis time (t), and 4-ABP initial concentration (C_o ) were selected as EO parameters, and their effects on %4-ABP removal (R₁ ) and energy consumed (R₂ ) were studied. Experimental design, parameters optimization, and their interaction with responses R₁ and R₂ were performed using response surface methodology. At optimized parameters, %TOC removal and 4-BP mineralization current efficiency (%MCE) were assessed to evaluate the potential of Ti/RuO₂ anodes towards 4-ABP mineralization. Simultaneous TOC and 4-ABP degradation kinetics were also studied to evaluate the competition in 4-ABP mineralization and degradation. Further, UPLC-Q-TOF-MS analysis was performed to identify the 4-ABP transformation products during the EO, and a mechanism describing the EO transformation was proposed. At optimum parameters (I = 1.2 A; pH = 4.0; t = 30 min; C_o  = 30 ppm), responses were found to be R₁  = 60.25%; R₂  = 2.49 kWh/g of 4-ABP removed. %TOC removal and %MCE were 52.4% and 34.2%, respectively. PRACTITIONER POINTS: 4-Aminobiphenyl electro-oxidation (EO) was explored using Ti/RuO₂ anode. Achieved 34.2% mineralization current efficiency, 52.4% TOC and 61.3% TKN removal. Three electro-oxidation transformation products of 4-ABP were detected. 4-Aminobiphenyl was found degrading at ≈1.6 times higher rate than TOC A plausible EO transformation pathway and mechanism was proposed.

A novel composite anode via immobilizing of Ce-doped PbO2 on CoTiO3 for efficiently electrocatalytic degradation of dye

The exploitation of efficient electrocatalyst is significantly important for degradation of refractory organic pollutants. Herein, a novel Ti/CoTiO₃/Ce-PbO₂ composite electrocatalyst (abbreviated as CTO/CP) is successfully constructed via facile consecutive immersion pyrolysis and electro-deposition method and then systematically characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FT-IR), energy dispersive spectroscopy (EDS) and near infrared chemical imaging (NIR-CI). Importantly, the electrochemical measurements demonstrate that the CTO/CP possesses numerous prominent properties such as lower charge transfer resistance, larger electroactive area, higher oxygen evolution potential than those of the pristine Ti/CoTiO₃ (CTO) and Ti/Ce-PbO₂ (CP). Thereby, the CTO/CP exhibits an enhanced electrocatalytic degradation performance with the degradation efficiency as high as 90.0% and COD removal rate of 88.3% at 180 min for the optimal CTO/CP (denoted as 10 layers of CTO and 1 h electrodeposition of CP), in which the ·OH is the major reactive species. Additionally, the optimal CTO/CP also shows a higher ICE/ACE together with lower EEC and desirable stability, universal applicability for many different dyes and reusability. Overall, this work offers a promising approach for enhancing the electrocatalytic properties of CTO via introducing CP.

Fabrication of novel three-dimensional Fe3O4-based particles electrodes with enhanced electrocatalytic activity for Berberine removal

Reasonable design of three-dimensional (3D) catalytic particle electrodes (CPEs) is crucial for achieving efficient electrocatalytic oxidation of organic pollutants. Herein, the novel Fe₃O₄/SnO₂/GO (FO/SO/GO) particle electrode has been developed and serviced to the 3D electrocatalytic berberine hydrochloride oxidation system with DSA (RuO₂-IrO₂-SnO₂/Ti) electrode as anode and GDE (gas diffusion electrode) electrode as the cathode. Compared with 2D systems and other CPEs, FO/SO/GO electrode shows excellent electrocatalytic activity and remarkable stability for BH removal, that is, the removal rate of BH is 94.8% within 90 min, and the rate constant is 0.03095 min^-1. More importantly, after five cycles, the ternary composite still maintains a strong ability to oxidize pollutants. The structural characterization and electrochemical measurement further uncover that the electron transfer ability and electrocatalytic oxidation efficiency are highly dependent on the surface structure regulation of CPEs. Furthermore, the quenching experiments show that hydroxyl radicals are the main active species in the 3D electro-Fenton (EF) system, which can oxidize BH molecules adsorbed on the surface of GO to CO₂, H₂O, or other products. The results could potentially provide new insights for designing and fabricating more stable and efficient 3D CPEs electrocatalytic removal of organic pollutants in the future.

Anodic oxidation of ciprofloxacin using different graphite felt anodes: Kinetics and degradation pathways

Ciprofloxacin (CIP) is ubiquitous in the environment which poses a certain threat to human and ecology. In this investigation, the physical and electrochemical properties of graphite felt (GF) anodes which affected the anodic oxidation (AO) performance, and the CIP removal effect of GF were evaluated. The GFs were used as anodes for detection of ·OH with coumarin (COU) as molecule probe and removal of CIP in a 150 mL electrolytic cell with Pt cathode (AO-GF/Pt system). The results showed that hydrophilic GF (B-GF) owned higher sp³/sp² and more oxygen-containing and nitrogen-containing functional groups than the hydrophobic GF (A-GF). Moreover, B-GF possessed higher oxygen evolution potential (1.12 V), more active sites and stronger ·OH generation capacity. Above mentioned caused that B-GF exhibited more superior properties for CIP removal. The best efficiencies (96.95%, 99.83%) were obtained in the AO-B-GF/Pt system at 6.25 mAcm^-2 after 10 min (k₁, 0.356 min^-1) and 60 min (k₂, 0.224 min^-1), respectively. Furthermore, nine degradation pathways of CIP in AO-B-GF/Pt system were summarized as the cleavage of the piperazine ring, cyclopropyl group, quinolone ring and F atom by ·OH. It provides new insights into the removal and degradation pathways of CIP with GF in AO system.

Fabrication of a multi-layer CNT-PbO2 anode for the degradation of isoniazid: Kinetics and mechanism

In this study, the CNTs were successfully compounded in PbO₂ electrode through composite electrodeposition technology to obtain multi-layer CNT-PbO₂ electrode. Scanning electron microscope, X-ray diffraction and X-ray Photoelectron Spectroscopy were comprehensively used to characterize the lead dioxide electrode and the electrochemical performance were also tested by cyclic voltammetry, and electrochemical impedance spectroscopy. Results showed that CNT-PbO₂ significantly improved the electrochemical performance, which was attributed to that the compound of CNTs in PbO₂ improved the active sites on the surface, with higher oxidation peaks, smaller particle size, larger specific surface area, and lower charge transfer resistance. In the degradation experiment, the chemical oxygen demand removal efficiency of isoniazid by CNT-PbO₂ electrode were 1.37 times of that by pure PbO₂ electrode. The main influence factors on the degradation of ISN, such as initial ISN concentration, Na₂SO₄ concentration, current density and initial pH value was analyzed in detail. Considered comprehensively the effects of ISN removal efficiency, COD and average current efficiency, the degradation of ISN and COD reached 99.4% and 86.8%, respectively, after the electrode was degraded by electrochemical oxidation for 120 min under the best conditions. In addition, the degradation mechanism of ISN in electrochemical oxidation was studied. According to the intermediate products detected by GC-MS, the possible degradation pathway of ISN in electrochemical oxidation system were proposed.

Ti/RuO2-IrO2-SnO2 Anode for Electrochemical Degradation of Pollutants in Pharmaceutical Wastewater: Optimization and Degradation Performances

Electrochemical oxidation technology is an effective technique to treat high-concentration wastewater, which can directly oxidize refractory pollutants into simple inorganic compounds such as H2O and CO2. In this work, two-dimensionally stable anodes, Ti/RuO2-IrO2-SnO2, have been developed in order to degrade organic pollutants from pharmaceutical wastewater. Characterization by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) showed that the oxide coating was successfully fabricated on the Ti plate surface. Electrocatalytic oxidation conditions of high concentration pharmaceutical wastewater was discussed and optimized, and the best results showed that the COD removal rate was 95.92% with the energy consumption was 58.09 kW·h/kgCOD under the electrode distance of 3 cm, current density of 8 mA/cm2, initial pH of 2, and air flow of 18 L/min.

Thermal decomposition based fabrication of dimensionally stable Ti/SnO2-RuO2 anode for highly efficient electrocatalytic degradation of alizarin cyanin green

In this work, Ti/SnO₂-RuO₂ dimensionally stable anode has been successfully fabricated via thermal decomposition method and further used for highly efficient electrocatalytic degradation of alizarin cyanin green (ACG) dye wastewater. The morphology, crystal structure and composition of Ti/SnO₂-RuO₂ electrode are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray fluorescence spectroscopy (XRF), respectively. The result of accelerated life test suggests that as-prepared Ti/SnO₂-RuO₂ anode exhibits excellent electrochemical stability. Some parameters, such as reaction temperature, initial pH, electrode spacing and current density, have been investigated in detail to optimize the degradation condition of ACG. The results show that the decolorization efficiency and chemical oxygen demand removal efficiency of ACG reach up to 80.4% and 51.3% after only 40 min, respectively, under the optimal condition (reaction temperature 25 °C, pH 5, electrode spacing 1.0 cm and current density 3 mA cm^-2). Furthermore, the kinetics analysis reveals that the process of electrocatalytic degradation of ACG follows the law of quasi-first-order kinetics. The excellent electrochemical activity demonstrates that the Ti/SnO₂-RuO₂ electrode presents a favorable application prospect in the electrochemical treatment of anthraquinone dye wastewater.

Fabrication of Co/Pr co-doped Ti/PbO2 anode for efficiently electrocatalytic degradation of β-naphthoxyacetic acid

The existence of β-naphthoxyacetic acid (BNOA) pesticide in water system has aroused serious environmental problem because of its potential toxicity for humans and organisms. Therefore, exploiting an efficient method without secondary pollution is extremely urgent. Herein, a promising Ti/PbO₂-Co-Pr composite electrode has been successfully fabricated through simple one-step electrodeposition for efficiently electrocatalytic degradation of BNOA. Compared with Ti/PbO₂, Ti/PbO₂-Co and Ti/PbO₂-Pr electrodes, Ti/PbO₂-Co-Pr electrode with smaller pyramidal particles possesses higher oxygen evolution potential, excellent electrochemical stability and outstanding electrocatalytic activity. The optimal degradation condition is assessed by major parameters including temperature, initial pH, current density and Na₂SO₄ concentration. The degradation efficiency and chemical oxygen demand removal efficiency of BNOA reach up to 94.6% and 84.6%, respectively, under optimal condition (temperature 35 °C, initial pH 5, current density 12 mA cm^-2, Na₂SO₄ concentration 8.0 g L^-1 and electrolysis time 3 h). Furthermore, Ti/PbO₂-Co-Pr electrode presents economic energy consumption and superior repeatability. Finally, the possible degradation mechanism of BNOA is put forward according to the main intermediate products identified by liquid chromatography-mass spectrometer. The present research paves a new path to degrade BNOA pesticide wastewater with Ti/PbO₂-Co-Pr electrode.

Adsorptive removal of gallic acid from aqueous solution onto magnetic ion exchange resin

Finding an appropriate adsorbent with high adsorption capacity, quick adsorption kinetics and easy regeneration was crucial to the removal of gallic acid (GA) from water and wastewater. Our aims were to investigate whether a magnetic ion exchange (MIEX) resin had the three merits mentioned above, and investigate the feasibility of GA adsorption on MIEX resin, and the adsorption kinetics, equilibrium, thermodynamics, regeneration and mechanism using batch tests. The uptake of GA increased with increasing GA concentration. The GA concentration influenced the time needed to reach equilibrium, but the adsorption could be completed within 120 min. Elevating temperature facilitated the GA removal. The removal percent remained above 95.0% at pH 5.0-11.0. Carbonate and bicarbonate promoted the GA removal; conversely chloride, sulfate and nitrate restrained the GA removal significantly. The adsorption kinetics could be fitted well with the pseudo second-order model, and the film diffusion governed the whole adsorption rate. The equilibrium data followed the Redlich-Peterson isotherm model. The adsorption was a spontaneous, endothermic and entropy driven process. The ion exchange dominated the removal mechanism. The spent MIEX resin was well regenerated by sodium chloride. Therefore, MIEX resin is a potential adsorbent for removing GA quickly and efficiently from water and wastewater.