Comprehensive evaluation on removal of lead by graphene oxide and metal organic framework

Adsorption of uranyl ion on hexagonal boron nitride for remediation of real U-contaminated soil and its interpretation using random forest

Acid leaching has been widely applied to treat contaminated soil, however, it contains several inorganic pollutants. The decommissioning of nuclear power plants introduces radioactive and soluble U(VI), a substance posing chemical toxicity to humans. Our investigation sought to ascertain the efficacy of hexagonal boron nitride (h-BN), an highly efficient adsorbent, in treating U(VI) in wastewater. The adsorption equilibrium of U(VI) by h-BN reached saturation within a mere 2 h. The adsorption of U(VI) by h-BN appears to be facilitated through electrostatic attraction, as evidenced by the observed impact of pH variations, acidic agents (i.e., HCl or H2SO4), and the presence of background ions on the adsorption performance. A reusability test demonstrated the successful completion of five cycles of adsorption/desorption, relying on the surface characteristics of h-BN as influenced by solution pH. Based on the experimental variables of initial U(VI) concentration, exposure time, temperature, pH, and the presence of background ions/organic matter, a feature importance analysis using random forest (RF) was carried out to evaluate the correlation between performances and conditions. To the best of our knowledge, this study is the first attempt to conduct the adsorption of U(VI) generated from real contaminated soil by h-BN, followed by interpretation of the correlation between performance and conditions using RF. Lastly, a. plausible adsorption mechanism between U(VI) and h-BN was explained based on the experimental results, characterizations, and a. comparison with previous adsorption studies on the removal of heavy metals by h-BN.

Ultrasonic treatment of dye chemicals in wastewater: A review

The existence of pollutants, such as toxic organic dye chemicals, in water and wastewater raises concerns as they are inadequately eliminated through conventional water and wastewater treatment methods, including physicochemical and biological processes. Ultrasonic treatment has emerged as an advanced treatment process that has been widely applied to the decomposition of recalcitrant organic contaminants. Ultrasonic treatment has several advantages, including easy operation, sustainability, non-secondary pollutant production, and saving energy. This review examines the elimination of dye chemicals and categorizes them into cationic and anionic dyes based on the existing literature. The objectives include (i) analyzing the primary factors (water quality and ultrasonic conditions) that influence the sonodegradation of dye chemicals and their byproducts during ultrasonication, (ii) assessing the impact of the different sonocatalysts and combined systems (with ozone and ultraviolet) on sonodegradation, and (iii) exploring the characteristics-based removal mechanisms of dyes. In addition, this review proposes areas for future research on ultrasonic treatment of dye chemicals in water and wastewater.

Stimuli-Responsive Ion Adsorbents for Sustainable Separation Applications

Stimuli-responsive ion absorbents (SRIAs) with reversible ion adsorption and desorption properties have recently attracted immense attention due to their outstanding functionalities for sustainable separation applications. Over the past decade, a series of SRIAs that respond to single or multiple external stimuli (e.g., pH, gas, temperature, light, magnetic, and voltage) have been reported to achieve excellent ion adsorption capacity and selectivity while simultaneously allowing for their reusability. In contrast to traditional adsorbents that are mainly regenerated through chemical additives, SRIAs allow for reduced chemical and even chemical-free regeneration capacities, thereby enabling environmentally friendly and energy-efficient separation technologies. In this review, we systematically summarize the materials and strategies reported to date for synthesizing single-, dual-, and multiresponsive ion adsorbents. Following a discourse on the fundamental mechanisms that govern their adsorption and desorption under various external stimuli, we provide a concise discussion of the regeneration capacity and application of these responsive ion adsorbents for sustainable water desalination, toxic ion removal, and valuable ion extract and recovery. Finally, we discuss the challenges in developing and deploying these promising multifunctional responsive ion adsorbents together with strategies to overcome these limitations and provide prospects for their future.

Metal-Organic Framework Derived Cu-Ag Interface for Selective Carbon Monoxide Electroreduction to Acetate

Electrochemical carbon monoxide reduction reaction (CORR) is a potential way to obtain high-value multi-carbon (C2+ ) products. However, achieving high selectivity to acetate is still a challenge. Herein, we develop a two-dimensional Ag-modified Cu metal-organic framework (Ag0.10 @CuMOF-74) that demonstrates Faradaic efficiency (FE) for C2+ products up to 90.4 % at 200 mA cm-2 and an acetate FE of 61.1 % with a partial current density of 122.2 mA cm-2 . Detailed investigations show that the introduction of Ag on CuMOF-74 favors the generation of abundant Cu-Ag interface sites. In situ attenuated total reflection surface enhanced infrared absorption spectroscopy confirms that these Cu-Ag interface sites improve the coverage of *CO and *CHO and the coupling between each other and stabilize key intermediates *OCCHO and *OCCH2 , thus significantly promoting to the acetate selectivity on Ag0.10 @CuMOF-74. This work provides a high-efficiency pathway for CORR to C2+ products.

Enhanced removal of toxic Cr(vi) and Pb(ii) from water using carboxylic terminated Ti3C2Tx nanosheets

The discharge of Cr(vi)and Pb(ii) contaminants into water resources through industrial waste induces a considerable risk to human and marine life, which demands an effective removal of these toxic metal ions (MI) from the aquatic environment. This study presents a remarkable adsorption performance of the carboxylic terminated Ti3C2Tx nanosheets synthesized using ammonium bifluoride and citric acid and applied as adsorbents for the removal of Cr(vi)and Pb(ii) from water. Adsorption efficiency was evaluated under sonication, MI concentration, and solution temperature at pH 5.5. Maximum adsorption capacities of 1090 mg g-1 and 1135 mg g-1 for Cr(vi) and Pb(ii) were attained within 7 and 4 minutes, respectively. Moreover, adsorption kinetic and isotherm studies were conducted, and the experimental data was found to fit well with pseudo-second-order reaction and Freundlich models. It was also established that the main interactions to drive the adsorption reactions were the electrostatic forces between the adsorbates and Ti3C2Tx adsorbent. Furthermore, (-COOH) and (-OH) terminal groups were the main contributors to the adsorption of Cr(vi) and Pb(ii) pollutants through an ion exchange mechanism. Besides the ion exchange mechanism, chemical coordination, entrapment of the adsorbates, and van der Waals forces lead to a physiochemical interaction between the MI and Ti3C2Tx nanosheets. In addition, Ti3C2Tx nanosheets showed better selectivity towards Pb(ii) removal than Cr(vi) in an aqueous solution. The nanosheets also exhibited more than 80% removal efficiency even after six cycles of regeneration and reusability. Additionally, Ti3C2Tx nanosheets offered superior adsorption performance for Cr(vi) and Pb(ii) compared to previously reported titanium carbide MXenes and activated carbon-based adsorbents. Hence, these high-quality and efficient Ti3C2Tx nanosheets can potentially eradicate other hazardous MI contaminants from wastewater.

Microbial functionalities and immobilization of environmental lead: Biogeochemical and molecular mechanisms and implications for bioremediation

The increasing environmental and human health concerns about lead in the environment have stimulated scientists to search for microbial processes as innovative bioremediation strategies for a suite of different contaminated media. In this paper, we provide a compressive synthesis of existing research on microbial mediated biogeochemical processes that transform lead into recalcitrant precipitates of phosphate, sulfide, and carbonate, in a genetic, metabolic, and systematics context as they relate to application in both laboratory and field immobilization of environmental lead. Specifically, we focus on microbial functionalities of phosphate solubilization, sulfate reduction, and carbonate synthesis related to their respective mechanisms that immobilize lead through biomineralization and biosorption. The contributions of specific microbes, both single isolates or consortia, to actual or potential applications in environmental remediation are discussed. While many of the approaches are successful under carefully controlled laboratory conditions, field application requires optimization for a host of variables, including microbial competitiveness, soil physical and chemical parameters, metal concentrations, and co-contaminants. This review challenges the reader to consider bioremediation approaches that maximize microbial competitiveness, metabolism, and the associated molecular mechanisms for future engineering applications. Ultimately, we outline important research directions to bridge future scientific research activities with practical applications for bioremediation of lead and other toxic metals in environmental systems.

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb²⁺ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g⁻¹, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.

Removal of lead ions from wastewater using lanthanum sulfide nanoparticle decorated over magnetic graphene oxide

In this study, the new lanthanum sulfide nanoparticle (La₂S₃) was synthesized and incorporated onto magnetic graphene oxide (MGO) sheets surface to produce potential adsorbent (MGO@LaS) for efficient removal of lead ions (Pb²⁺) from wastewater. The synthesized MGO@LaS adsorbent was characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. The effective parameters on the adsorption process including solution pH (~5), adsorbent dosage (20 mg), contact time (40 min), initial Pb²⁺ concentration and temperature were studied. The removal efficiency was obtained >95% for lead ions at pH 5 with 20 mg adsorbent. To validate the adsorption rate and mechanism, the kinetic and thermodynamic models were studied based on experimental data. The Langmuir isotherm model was best fitted to initial equilibrium concentration with a maximum adsorption capacity of 123.46 mg/g. This indicated a monolayer adsorption pattern for Pb²⁺ ions over MGO@LaS. The pseudo-second-order as the kinetic model was best fitted to describe the adsorption rate due to high R² > 0.999 as compared first-order. A thermodynamic model suggested a chemisorption and physisorption adsorption mechanism for Pb²⁺ ions uptake into MGO@LaS at different temperatures; ΔG° < -5.99 kJ mol^-1 at 20 °C and ΔG° -18.2 kJ mol^-1 at 45 °C. The obtained results showed that the novel nanocomposite (MGO@LaS) can be used as an alternative adsorbent in wastewater treatment.

Activated multi-walled carbon nanotubes decorated with zero valent nickel nanoparticles for arsenic, cadmium and lead adsorption from wastewater in a batch and continuous flow modes

Nickel nanoparticles (NiNPs) supported on activated multi-walled carbon nanotubes (MWCNTs) were used as an adsorbent applied towards Pb(II), As(V) and Cd(II) remediation from industrial wastewater. The result revealed the hydrophilic surface of MWCNTs-KOH was enhanced with the incorporation of NiNPs enabling higher surface area, functional groups and pore distribution. Comparatively, the removal of Pb(II), As(V) and Cd(II) on the various adsorbents was reported as NiNPs (58.6 ± 4.1, 46.8 ± 3.7 and 40.5 ± 2.5%), MWCNTs-KOH (68.4 ± 5.0, 65.5 ± 4.2 and 50.7 ± 3.4%) and MWCNTs-KOH@NiNPs (91.2 ± 8.7, 88.5 ± 6.5 and 80.6 ± 5.8%). Using MWCNTs-KOH@NiNPs, the maximum adsorption capacities of 481.0, 440.9 and 415.8 mg/g were obtained for Pb(II), As(V) and Cd(II), respectively. The experimental data were best suited to the Langmuir isotherm and pseudo-second order kinetic model. The fitness of experimental data to the kinetic models in a fixed-bed showed better fitness to Thomas model. The mechanism of metal ion adsorption onto MWCNTs-KOH@NiNPs show a proposed electrostatic attraction, surface adsorption, ion exchange, and pore diffusion due to the incorporated NiNPs. The nanocomposite was highly efficient for 8 adsorption cycles. The results of this study indicate that the synthesized nanocomposite is highly active with capacity for extended use in wastewater treatment.

Performance of novel GO-Gly/HNTs and GO-GG/HNTs nanocomposites for removal of Pb(II) from water: optimization based on the RSM-CCD model

For the first time, in this study, two novel glycogen-graphene oxide/halloysite nanotubes (GO-Gly/HNTs) and guar gum-graphene oxide/halloysite nanotubes (GO-GG/HNTs) nanocomposites were synthesized as the adsorbents for removal of Pb(II) from water, and the ionic liquid was used in the synthesis as a green solvent. According to the SEM, TEM, EDS, BET, zeta potential, FTIR, and XRD results, GO-Gly/HNTs and GO-GG/HNTs were synthesized successfully. Response surface methodology (RSM) was applied to optimize the experimental conditions. Nanocomposites followed the Langmuir equilibrium model and were best fitted to the pseudo-second-order model. According to the thermodynamic model, the adsorption process was endothermic. Due to several features, these two novel nanocomposites can be considered the proper candidate for Pb(II) removal from water and wastewater. First, these nanocomposites have good adsorption capacity for Pb(II) removal, which is 219 mg/g for GO-Gly/HNTs and 315 mg/g for GO-GG/HNTs. Moreover, nanocomposites can be recycled with proper adsorption capacity after four repeated cycles. These materials can be used to remove Pb(II) from water in the presence of other contaminants because nanocomposites have selective tendency toward Pb(II) in the presence of other pollutants such as Cd²⁺, Cu²⁺, Cr²⁺, and Co²⁺. In addition, the presence of Ca²⁺, Mg²⁺, Na⁺, and K⁺ improve Pb(II) removal. Finally, possible mechanisms for each nanocomposite were represented.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Review of adsorption-membrane hybrid systems for water and wastewater treatment

Adsorption is an effective method for the removal of inorganic and organic contaminants and has been commonly used as a pretreatment method to improve contaminant removal and control flux during membrane filtration. Over the last two decades, many researchers have reported the use of hybrid systems comprising various adsorbents and different types of membranes, such as nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF) membranes, to remove contaminants from water. However, a comprehensive evaluation of the removal mechanisms and effects of the operating conditions on the transport of contaminants through hybrid systems comprising various adsorbents and NF, UF, or MF membranes has not been performed to date. Therefore, a systematic review of contaminant removal using adsorption-membrane hybrid systems is critical, because the transport of inorganic and organic contaminants via the hybrid systems is considerably affected by the contaminant properties, water quality parameters, and adsorbent/membrane physicochemical properties. Herein, we provide a comprehensive summary of the most recent studies on adsorption-NF/UF/MF membrane systems using various adsorbents and membranes for contaminant removal from water and wastewater and highlight the future research directions to address the current knowledge gap.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.

Nanocarbon hybrid for simultaneous removal of arsenic, iron and manganese ions from aqueous solutions

Heavy metal contamination is a severe problem with serious ecological and human health effects due to its toxic effect and tendency to accumulate throughout the food chain. Batch experiments were conducted to investigate the simultaneous removal of arsenic, iron and manganese ions from aqueous solutions using Nanocarbon hybrid (NCH). Nanocarbon hybrid (NCH) of carbon xerogel decorated with 1wt% multi-walled carbon nanotubes was prepared by carbonization at 850 °C for 2 h. The TEM, SEM, EDX, FTIR, and N₂ adsorption-desorption measurements were used to characterize the prepared NCH. NCH is enriched with surface oxygen functional groups and micropores as well as it have total surface area of 162 m²/g and total pore volume of 0.129 cm³/g. The adsorption of metal ions onto NCH, which confirmed by EDX, happened quickly, with 30%, 97%, and 41% of As, Fe, and Mn adsorbed in less than 10 min, however the equilibrium time was achieved in less than 30 min. The maximum adsorption capacities for As, Fe, and Mn ions onto NCH were 20, 48, and 21 mg/g, respectively. The experimental adsorption results of the three metal ions showed linearly fitting with Freundlich isotherms. In addition, the computed adsorption energies for Fe, Mn, and As ions were 4.08, 1.95, and 2.42 kJ/mol, indicating physical adsorption. NCH are easily regenerated and reusable sorbent owing to the adsorption–desorption studies. Conclusively, NCH is promising material for removing mixture of metal ions from aqueous media.

Highly efficient scavenging of Cr(VI) by two-dimensional titanium carbide nanosheets: kinetics, isotherms and thermodynamics analysis

In this study, two-dimensional (2D) MXene material (Ti₃C₂T_x) was employed to investigate its potentials toward the Cr(VI) removal in aqueous system by batch experiments. Characterization techniques such as SEM-EDS, HRTEM, XRD, FI-TR and XPS were used to analyze the structure and interaction of Ti₃C₂T_x before and after Cr(VI) adsorption. The results indicated that the layered structure of Ti₃C₂T_x had unique surface functional properties and abundant active sites, such as -OH, Ti-O, C = O, which exhibited high adsorption capacity for Cr(VI) removal. The Cr(VI) adsorption capacity by Ti₃C₂T_x decreased with the increase of pH, and its maximum value can reach 169.8 mg/g at pH = 2.0. The adsorption kinetic was well-explained by a pseudo-second-order kinetic, indicating that chemical interaction played a dominant role in the adsorption of Cr(VI) on Ti₃C₂T_x. Meanwhile, the isotherm data was calculated to conform to the Freundlich isotherm model. Thermodynamic analysis indicated that the adsorption process of Cr(VI) on Ti₃C₂T_x was a spontaneous endothermic process. These experimental results revealed that Ti₃C₂T_x had tremendous potential in heavy metals adsorption from aqueous solutions.

Indium metal-organic frameworks based on pyridylcarboxylate ligands and their potential applications

Indium metal-organic frameworks (In-MOFs) based on pyridylcarboxylate ligands represent a subclass of MOFs featuring diverse structures, a high stability, and various properties. This review discusses the different aspects of In-MOFs including their design, synthesis and structures as well as their typical potential applications in adsorption and separation, catalysis, and chemical sensors. Importantly, the effect of pyridine on the properties and stability of frameworks has been carefully studied. The introduction of a pyridine group not only significantly enriches clusters of In3+ ions, but also enables flexible, controllably synthesized ionic or neutral frameworks to be fabricated. Based on this, we suggest that this type of In-metal organic framework (MOF) should receive more attention in the field of MOF design.

Novel Z-scheme Ag3PO4/Fe3O4-activated biochar photocatalyst with enhanced visible-light catalytic performance toward degradation of bisphenol A

A novel solid-state Z-scheme heterostructure, Ag₃PO₄/Fe₃O₄ co-doped bamboo-derived activated biochar (Ag-Fe@BAB), was synthesized as an efficient photocatalyst via a co-precipitation method. Ag-Fe@BAB was used as a magnetically recoverable photocatalyst to generate free radical species with peroxydisulfate (PDS) activation under visible-LED-light illumination. The successful synthesis of Ag-Fe@BAB was confirmed by various characterization techniques. Bisphenol A (BPA) was used as a model pollutant to evaluate the photocatalytic activities of the Vis/Ag-Fe@BAB/PDS system. To confirm the photocatalytic performance of the Vis/Ag-Fe@BAB/PDS system, the effects of significant operating parameters such as the contact time, concentration of oxidant, photocatalyst dosage, and solution pH on the degradation of BPA were evaluated. We confirmed that 95.6% BPA was degraded within 60 min in the Vis/Ag-Fe@BAB/PDS system under 1.0 g/L photocatalyst, pH 6.5, and 0.5 mM PDS. The degradation mechanism of BPA in the Vis/Ag-Fe@BAB/PDS system was mainly attributed to O₂^‾ owing to its photocatalytic performances in the presence of p-benzoquinone as a scavenger. Furthermore, the radical species produced in the Vis/Ag-Fe@BAB/PDS system were identified by electron spin resonance. Finally, we demonstrated the recyclability of the Ag-Fe@BAB photocatalyst through its excellent magnetic property.

Enhanced adsorption of As(V) and Mn(VII) from industrial wastewater using multi-walled carbon nanotubes and carboxylated multi-walled carbon nanotubes

The presence of As(V) and Mn(VII) in water beyond the permissible concentration allowed by World Health Organization (WHO) standard affects human beings, animals and the environment adversely. Hence, there is need for an efficient material to remove these potentially toxic elements from wastewater prior to discharge into water bodies. This research focused on the application of response surface method (RSM) assisted optimization of Fe-Ni/Activated carbon (AC) catalyst for the synthesis of MWCNTs. Also, the MWCNTs was carboxylated and the adsorption behaviors of both nano-adsorbents in the removal of As(V) and Mn(VII) from industrial wastewater was investigated through experimental and computational techniques. The prepared Fe-Ni/AC, MWCNTs and MWCNTs-OCH₂CO₂H were characterized using BET, TGA, FTIR, HRSEM, HRTEM, XRD and XPS. The result showed the BET surface area of Fe-Ni/AC, MWCNTs and MWCNTs-OCH₂CO₂H were obtained as 1100, 1250 and 1172 m²/g, respectively. Due to the enhanced impact of carboxylation, the adsorption capacity of As(V) and Mn(VII) removal increased from 200 to 192 mg/g for MWCNTs to 250 and 298 mg/g for MWCNTs-OCH₂CO₂H. The isotherm and kinetic models were best fitted by Langmuir and pseudo-second order kinetics, while the thermodynamic investigation found that the adsorption process was endothermic, spontaneous and chemisorptions controlled. The regeneration potential of MWCNTs and MWCNTs-OCH₂CO₂H after six repeated applications revealed good stability of adsorption efficiency. The study demonstrated optimization importance of Fe-Ni/AC catalyst design for MWCNTs adsorbents and the potentials of utilizing both MWCNTs and MWCNTs-OCH₂CO₂H in the removal of selected heavy metals from water and soil.

Ultrasound-assisted Ti3C2Tx MXene adsorption of dyes: Removal performance and mechanism analyses via dynamic light scattering

Herein, ultrasonication (US)-assisted novel nanomaterial Ti₃C₂T_x MXene was utilized as a selective adsorbent for treatment of synthetic dyes in model wastewater. Two types of US frequencies, 28 and 580 kHz, were applied to disperse MXene to evaluate the feasibility of US-assisted MXene for wastewater treatment. The physico-chemical properties of MXene after US were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and zeta potential. According to FTIR and XPS, 28 kHz US-assisted MXene had a greater amount of oxygenated functional groups and dispersion compared to 580 kHz US-assisted and pristine MXene. Subsequently, US-assisted MXene was utilized as an adsorbent for the removal of positively charged methylene blue (MB) and negatively charged methyl orange. Both 28 and 580 kHz US-assisted MXene showed better adsorption performance for only MB compared to stirring-assisted MXene based on kinetics, isotherms, and several water chemistry factors including solution pH, temperature, ionic strength, and humic acid. Advantages of US-assisted MXene for water treatment are its fast kinetics at low dose and high selectivity for positively charged target compounds (i.e., MB). The main adsorption mechanism between MXene and MB was electrostatic interaction (attraction); however, physical properties (i.e., aggregation kinetics and hydrodynamic diameter), measured via dynamic light scattering, were also found to be critical factors in controlling the adsorption performance of the system. Lastly, US-assisted MXene exhibited a high regeneration property, based on 4th adsorption-desorption cycles.

One-dimensional graphene for efficient aqueous heavy metal adsorption: Rapid removal of arsenic and mercury ions by graphene oxide nanoribbons (GONRs)

There is a knowledge gap for the application of one-dimensional graphene in the adsorption process. Our hypothesis was based on the fact that graphene oxide nanoribbons (GONRs) as one-dimensional graphene with more desired edges and specific surface area than other carbonaceous nanomaterials have more oxygen containing functional groups (active sites) on their edges and basal planes and therefore are more capable in adsorption of pollutants. In this regard, we synthesized GONRs by unzipping of multi-walled carbon nanotubes (MWCNTs) and investigated the adsorption behavior of GONRs by ultrasonic-assisted adsorptive removal of As(V) and Hg(II) ions from aqueous solution. The obtained results showed that As(V) ions are more favorably adsorbed onto the GONRs than Hg(II) ions and with increasing initial As(V) and Hg(II) ions concentration to 300 ppm, the equilibrium adsorption uptake of the synthesized GONRs increases to 155.61 and 33.02 mg/g for As(V) and Hg(II) ions, respectively through a rapid separation process in just 12 min. Also, three kinetic models and Freundlich and Langmuir adsorption isotherms were applied to evaluate the obtained experimental results. Our findings highlight the potential application of GONRs as one-dimensional graphene adsorbent with more desired edges than MWCNTs and graphene oxide (GO) and high adsorption capacity for selective removal of heavy metals.

Ultrasonic degradation of selected dyes using Ti3C2Tx MXene as a sonocatalyst

MXene, a new family of two dimensional materials, was utilized as a sonocatalyst in an ultrasonic treatment (US) process for removal of methylene blue (MB) and acid blue 80 (AB). The physico-chemical properties of MXene were characterized using scanning electron microscopy, transmission electron microscopy, porosimetry, and a zeta potential analyzer. Degradation of dyes by US was systemically investigated under several experimental conditions including: power density of US (45, 90, 135, and 180 W L^-1), frequency of US (28 and 970 kHz), pH of dye solution (3.5, 7, and 10.5), solution temperature (293, 303, and 313 K), and addition of hydroxyl radical promotor (H₂O₂) and scavenger (t-BuOH) to concentrations of 25 mM. Based on the experimental results, the quantity of H₂O₂, which was used as an indicator of hydroxyl radical concentration, was an important factor in determining the degradation rate of MB and AB in this US study. Additionally, synergetic indices for removal of both dyes were higher than 1.0 in all cases, indicating the outstanding efficiency of MXene as a sonocatalyst in the US reactor for removal of both, due to an increase in both (i) the quantity of H₂O₂ in the US reactor and (ii) active sites for adsorbates from dispersion effects. A stability test on MXene in the US process was conducted using X-ray diffraction and five-cycle recycling performance tests. Based on our experimental data, MXene can be utilized as a sonocatalyst in the US process for a high removal rate for dyes (e.g., MB).

Adsorption of Ba2+ and Sr2+ on Ti3C2Tx MXene in model fracking wastewater

Wastewater from hydraulic fracking contains both organic and inorganic pollutants; the latter include radioactive nuclides such as Ba²⁺ and Sr²⁺. We explored whether MXene (Ti₃C₂T_x), a novel adsorbent, could remove Ba²⁺ and Sr²⁺ from model wastewater. Zeta potential analysis showed that MXene had a high negative surface charge. MXene adsorbed Ba²⁺ and Sr²⁺ via electrostatic attraction, as confirmed by the adsorption at different solution pH values and in the presence of various concentrations of other ions (NaCl and CaCl₂). MXene exhibited outstanding adsorption of Ba²⁺ and Sr²⁺, to approximately 180 and 225 mg g^-1, respectively, when 1 g L^-1 MXene was admixed with adsorbates at 2 g L^-1. MXene exhibited very rapid adsorption kinetics, attaining equilibrium within 1 h. X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy revealed that MXene adsorbed Ba²⁺ and Sr²⁺, respectively, via ion exchange and inner-sphere complex formation. Finally, we performed MXene reusability tests; reusability was excellent over at least four cycles. Thus, MXene removed Ba²⁺ and Sr²⁺ from model fracking wastewater.

Optimisation and Modelling of Pb (II) and Cu (II) Biosorption onto Red Algae (Gracilaria changii) by Using Response Surface Methodology

The removal of Pb (II) and Cu (II) ions by using marine red macroalgae (Gracilaria changii) as a biosorbent material was evaluated through the batch equilibrium technique. The effect of solution pH on the removal of metal ions was investigated within the range of 2–7. The response surface methodology (RSM) technique involving central composite design (CCD) was utilised to optimise the three main sorption parameters, namely initial metal ion concentration, contact time, and biosorbent dosage, to achieve maximum ion removal. The models’ adequacy of response was verified by ANOVA. The optimum conditions for removal of Pb (II) and Cu (II) were as follows: pH values of 4.5 and 5, initial concentrations of 40 mg/L, contact times of 115 and 45 min, and biosorbent dosage of 1 g/L, at which the maximum removal percentages were 96.3% and 44.77%, respectively. The results of the adsorption isotherm study showed that the data fitted well with the Langmuir’s model for Pb (II) and Cu (II). The results of the adsorption kinetic study showed that the data fitted well with the pseudo-second order model for Pb (II) and Cu (II). In conclusion, red alga biomass exhibits great potential as an efficient low-cost sorbent for removal of metal ions.

Comprehensive evaluation of the removal mechanism of carbamazepine and ibuprofen by metal organic framework

Pharmaceutical products (PhACs) in water sources are considered to be a severe environmental issue. To mitigate this issue, we used a metal-organic framework (MOF) as an adsorbent to remove selected PhACs (i.e., carbamazepine (CBM) and ibuprofen (IBP)). This work was carried out to characterize the MOF, then confirm its feasibility for removing the selected PhACs. In particular, based on practical considerations, we investigated the effects of various water quality conditions, such as solution temperature, pH, ionic strength/background ions, and humic acid. MOF exhibited better removal rates than commercial powder activated carbon (PAC), considering pseudo-second order kinetic model. We clarified the competitive PhACs adsorption mechanisms based on the results obtained under various water quality conditions and found that hydrophobic interactions were the most important factors for both adsorbates. To confirm the practicality of MOF adsorption, we carried out regeneration tests with four adsorption and desorption cycles using acetone as a cleaning solution. Furthermore, to support the results of our regeneration tests, we characterized the MOF samples before and after adsorbate exposure using Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Overall, MOF can be used in practical applications as efficient adsorbents to remove PhACs from water sources.

Preparation of Activated Biochar-Supported Magnetite Composite for Adsorption of Polychlorinated Phenols from Aqueous Solutions

For this study, we applied activated biochar (AB) and its composition with magnetite (AB-Fe3O4) as adsorbents for the removal of polychlorophenols in model wastewater. We comprehensively characterized these adsorbents and performed adsorption tests under several experimental parameters. Using FTIR, we confirmed successful synthesis of AB-Fe3O4 composite through cetrimonium bromide surfactant. We conducted adsorption tests using AB and AB-Fe3O4 to treat model wastewater containing polychlorophenols, such as 2,3,4,6-Tetrachlorophenol (TeCP), 2,4,6-Trichlorophenol (TCP), and 2,4-Dichlorophenol (DCP). Results of the isotherm and the kinetic experiments were well adapted to Freundlich’s isotherm model and the pseudo-second-order kinetic model, respectively. Main adsorption mechanisms in this study were attributed to non-covalent, π-electron acceptor–donor interactions and hydrophobic interactions judging from the number of chloride elements in each chlorophenol and its hydrophobic characteristics. We also considered the electrostatic repulsion effect between TeCP and AB, because adsorption performance of TeCP at basic condition was slightly worse than at weak acidic condition. Lastly, AB-Fe3O4 showed high adsorption selectivity of TeCP compared to other persistent organic pollutants (i.e., bisphenol A and sulfamethoxazole) due to hydrophobic interactions. We concluded that AB-Fe3O4 may be used as novel adsorbent for wastewater treatment including toxic and hydrophobic organic pollutants (e.g., TeCP).

Post-Treatment of Nanofiltration Polyamide Membrane through Alkali-Catalyzed Hydrolysis to Treat Dyes in Model Wastewater

This research focused on the influence of post-treatment using alkali-catalyzed hydrolysis with a full-aromatic nanofiltration (NF) polyamide membrane and its application to the efficient removal of selected dyes. The post-treated membranes were characterized through Fourier transform infrared spectroscopy, goniometry, and zeta-potential analysis to analyze the treatment-induced changes in the intrinsic properties of the membrane. Furthermore, the changes in permeability induced by the post-treatment were evaluated via the measurement of water flux, NaCl rejection, and molecular weight cutoff (MWCO) under different pH conditions and post-treatment times. Major changes induced by the post-treatment in terms of physicochemical properties were the enhancement of permeability, hydrophilicity, and negative charge due to the hydrolysis of the membrane’s amide bonds. Four different dyes were selected as representative organic pollutants considering the MWCO of the post-treated membranes. Compared with the pristine NF membrane, membranes post-treated at pH 13.5 showed better water flux with similar rejection of the target dyes. On the basis of these results, the proposed post-treatment method for NF membranes can be applied to the removal of organic pollutants of various size.