Inhibition of anaerobic ammonium oxidation (anammox) bacteria by addition of high and low concentrations of chloramphenicol and comparison of attached- and suspended-growth

Improved regression model for anaerobic ammonium oxidation by repeated and prolonged batch assay under stressful salinity and pH conditions

The aim of this study was to propose repeated and prolonged batch (RPB) assay as a promising specific anammox activity (SAA) methodology assessing the anammox activity under stressed salinity and pH conditions. Response surface analysis (RSA) was used as a regression tool to evaluate statistical significance. The feasibility of RPB was investigated at 0 to 15 g-NaCl/L of salinity and pH 6 to 8 with reflecting the results of preliminary SAA. As a result, conventional SAA was statistically insignificant. In addition, the RSA results obtained from repeated batch did not meet the statistical significance despite ten times iterative reaction. Interestingly, the RPB assay (i.e., applied both repeated and prolonged reaction) was effective to obtain the reliable results. Candidadus Brocadia and Candidadus Jettenia were functional anammox microbiome during RPB. Outcomes of this study suggest that RPB assay can be applied to accurately determine the anammox activity under various stressful conditions.

Response of mixed community anammox biomass against sulfide, nitrite and recalcitrant carbon in terms of inhibition coefficients and functional gene expressions

Anaerobic ammonium oxidation (anammox) has evolved as a carbon and energy-efficient nitrogen management bioprocess. However, factors such as inhibitory chemicals still challenge the easy operation of this powerful bioprocess. This research systematically evaluated the inhibition kinetics of sulfide, nitrite, and recalcitrant carbon under a genomic framework. The inhibition at the substrate and genetic levels of sulfide, nitrite and recalcitrant carbon on anammox activity was studied using batch tests. Nitrite inhibition of anammox followed substrate inhibition and was best described by the Aiba model with an inhibition coefficient [Formula: see text] of 324.04 mg N/L. Hydrazine synthase (hzsB) gene (anammox biomarker) expression was increased over time when incubated with nitrite up to 400 mg N/L. However, despite having the highest specific nitrite removal (SNR), the expression of hzsB at 100 and 200 mg N/L of nitrite was more muted than in most other samples with lower SNRs. Sulfide severely inhibited anammox activities. The inhibition was fitted with a Monod-based model with a [Formula: see text] of 4.39 mg S/L. At a sulfide concentration of 5 mg/L, the hzsB expression decreased throughout the experiment from its original value at he beginning. Recalcitrant carbon of filtrate from thermal hydrolysis process pretreated anaerobic digester had a minimal effect on maximum specific anammox activity (MSAA), and thus the value of the inhibition coefficient could not be calculated. At the same time, its hzsB expression profile was similar to that in the control. Resiliency and recovery tests indicated that the inhibition of nitrite (up to 400 mg N/L) and recalcitrant carbon (in 100% filtrate) were reversible. About 32% of MSAA was recovered after repeated exposures to sulfide at 2.5 mg/L, while at 5 mg/L, the inhibition was irreversible. Findings from this study will be helpful for the successful design and implementation of anammox in full-scale applications.

Effects of Typical Antimicrobials on Growth Performance, Morphology and Antimicrobial Residues of Mung Bean Sprouts

Antimicrobials may be used to inhibit the growth of micro-organisms in the cultivation of mung bean sprouts, but the effects on mung bean sprouts are unclear. In the present study, the growth performance, morphology, antimicrobial effect and antimicrobial residues of mung bean sprouts cultivated in typical antimicrobial solutions were investigated. A screening of antimicrobial residues in thick-bud and rootless mung bean sprouts from local markets showed that the positive ratios of chloramphenicol, enrofloxacin, and furazolidone were 2.78%, 22.22%, and 13.89%, respectively. The cultivating experiment indicated that the production of mung bean sprouts in antimicrobial groups was significantly reduced over 96 h (p < 0.05). The bud and root length of mung bean sprouts in enrofloxacin, olaquindox, doxycycline and furazolidone groups were significantly shortened (p < 0.05), which cultivated thick-bud and rootless mung bean sprouts similar to the 6-benzyl-adenine group. Furthermore, linear regression analysis showed average optical density of 450 nm in circulating water and average production had no obvious correlation in mung bean sprouts (p > 0.05). Antimicrobial residues were found in both mung bean sprouts and circulating water. These novel findings reveal that the antimicrobials could cultivate thick-bud and rootless mung bean sprouts due to their toxicity. This study also proposed a new question regarding the abuse of antimicrobials in fast-growing vegetables, which could be a potential food safety issue.

Impact of ciprofloxacin and copper combined pollution on activated sludge: Abundant-rare taxa and antibiotic resistance genes

This study aimed to explore the impacts of ciprofloxacin (CIP, 0.05-40 mg/L) and copper (3 mg/L) combined pollution on nitrification, microbial community and antibiotic resistance genes (ARGs) in activated sludge system during stress- and post-effect periods. Higher CIP concentration inhibited nitrification and an average of 50% total nitrogen removal occurred under 40 mg/L of CIP pressure. The stress- and post-effects on bacterial diversity and structure were obviously distinct. Abundant genera were more sensitive to combined pollution than rare genera based on full-scale classification and conditionally rare or abundant taxa were keystone taxa in their interactions. Ammonia oxidation genes were inhibited under high CIP level, but some aerobic denitrifying bacteria (Thauera, Comamonas and Azoarcus) and key genes increased. 96 ARG subtypes were detected with complex positive relationships and their potential hosts (abundant-rare-functional genera) changed in two periods. This study highlights the different stress- and post-effects of combined pollution on activated sludge.

The influence of antibiotics on the anammox process - a review

Anaerobic ammonium oxidation (anammox) is one of the most promising processes for the treatment of ammonium-rich wastewater. It is more effective, cheaper, and more environmentally friendly than the conventional process currently in use for nitrogen removal. Unfortunately, anammox bacteria are sensitive to various substances, including heavy metals and organic matter commonly found in the wastewater treatment plants (WWTPs). Of these deleterious substances, antibiotics are recognized to be important. For decades, the increasing consumption of antibiotics has led to the increased occurrence of antibiotics in the aquatic environment, including wastewater. One of the most important issues related to antibiotic pollution is the generation and transfer of antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs). Here, we will discuss the effect of short- and long-term exposure of the anammox process to antibiotic pollutants; with a special focus on the activity of the anammox bacteria, biomass properties, community structures, the presence of antibiotic resistance genes and combined effect of antibiotics with other substances commonly found in wastewater. Further, the defense mechanisms according to which bacteria adapt against antibiotic stress are speculated upon. This review aims to facilitate a better understanding of the influence of antibiotics and other co-pollutants on the anammox process and to highlight future avenues of research to target gaps in the knowledge.

Feasibility of partial-denitrification/ anammox for pharmaceutical wastewater treatment in a hybrid biofilm reactor

Biological nitrogen removal from pharmaceutical wastewater has drawn increasing attention due to biotoxicity and inhibition. In this study, for the first time, a novel approach integrating partial-denitrification with anaerobic ammonia oxidation (PD/A) in a sequencing biofilm batch reactor (SBBR) was proposed and demonstrated to be efficient to treat the bismuth nitrate and bismuth potassium citrate manufacturing wastewater, containing ammonia (NH₄⁺-N) and nitrate (NO₃^--N) of 6300±50 mg L ^- 1 and 15,300±50 mg L ^- 1. The maximum anammox activity was found at the shock effect of influent total nitrogen (TN) of 100 mg L ^- 1 with NO₃^--N/NH₄⁺-N of 1.0. Long-term operation demonstrated that the PD/A biofilm was developed rapidly after 30 days using synthetic influent, with TN removal efficiency increasing from 40.9% to 80.8%. Significantly, the key bacteria for PD/A had high tolerance and adapted rapidly to pharmaceutical wastewater, achieving a relatively stable TN removal efficiency of 81.2% with influent NH₄⁺-N and NO₃^--N was 77.9 ± 2.6 and 104.1 ± 4.4 mg L ^- 1 at a relatively low COD/NO₃^--N of 2.6. Anammox pathway contributed to TN removal reached 83.6%. Significant increase of loosely-bound extracellular polymeric substances was obtained with increasing protein of 3-turn helices structure as response to the inhibitory condition. High-throughput sequencing analysis revealed that the functional genus Thauera was highly enriched in both biofilms (9.5%→43.6%) and suspended biomass (15.5%→57.5%), which played a key role in high NO₂^--N accumulation. While the anammox bacteria decreasing from 7.8% to 1.6% in biofilm, and from 1.8% decreased to 0.1% in the suspended sludge. Overall, this study provides a new method of high-strength pharmaceutical wastewater treatment with low energy consumption and operation cost, as well as a satisfactory efficiency.

Inhibition of anammox activity by municipal and industrial wastewater pollutants: A review

The use of the anammox process for nitrogen removal has gained popularity across the world due to its low energy consumption and waste generation. Anammox reactors have been used to treat ammonium-rich effluents such as chemical, pharmaceutical, semiconductor, livestock, and coke oven wastewater. Recently, full-scale installations have been implemented for municipal wastewater treatment. The efficiency of biological processes is susceptible to inhibitory effects of pollutants present in wastewater. Considering the increasing number of emerging contaminants detected in wastewater, the impacts of the different types of pollutants on anammox bacteria must be understood. This review presents a compilation of the studies assessing the inhibitory effects of different wastewater pollutants towards anammox activity. The pollutants were classified as antibiotics, aromatics, azoles, surfactants, microplastics, organic solvents, humic substances, biodegradable organic matter, or metals and metallic nanoparticles. The interactions between the pollutants and anammox bacteria have been described, as well as the interactions between different pollutants leading to synergistic effects. We also reviewed the effects of pollutants on distinct species of anammox bacteria, and the main toxicity mechanisms leading to irreversible loss of anammox activity have been identified. Finally, we provided an analysis of strategies to overcome the inhibitory effects of wastewater pollutants on the nitrogen removal performance. We believe this review will contribute with essential information to assist the operation and design of anammox reactors treating different types of wastewaters.

Simultaneous carbon and nitrogen removal by anaerobic ammonium oxidation and denitrification under different operating strategies

Real domestic wastewater was treated initially in a sequencing batch reactor (SBR), with partial nitrification achieved before the effluent was used as the influent for an anaerobic ammonium oxidation (anammox) reactor (ASBR) system. The effects of three factors, hydraulic retention time (HRT), substrate (NO₂^-/NH₄⁺) ratio, and the ratio of COD to NH₄⁺ (C/N), on the removal of carbon and nitrogen by an anammox and denitrification process were investigated in the ASBR reactor at 24°C. The response surface methodology was used to explore the interactions of the three factors. The results indicated that the nitrogen and carbon removal efficiency was optimum when HRT, substrate ratio, and C/N ratio were 33 h, 1.4-1.6, and 3-5, respectively. The optimal removal rates of NH₄⁺, NO₂^-, and COD were 96.30%, 97.79%, and 72.91%, respectively. The ΔNO₂^-/ΔNH₄⁺ and ΔNO₃^-/ΔNH₄⁺ ratios of the first two conditions were less than the theoretical anammox values of 1.32 and 0.26 due to heterotrophic denitrification. The optimum nitrogen and carbon removal efficiencies of the third condition could be realized by the synergistic effect of denitrification and the anammox process. Analysis of variance (ANOVA) results showed that when the HRT was 33.48 h, the substrate ratio was 1.46, and the C/N ratio was 4.28, the total nitrogen removal rate (TNR) was optimum (90.12 ± 0.1%), verified by parallel experiments.

Response of microbial communities based on full-scale classification and antibiotic resistance genes to azithromycin and copper combined pollution in activated sludge nitrification laboratory mesocosms at low temperature

This study aimed to investigate the short-term response of abundant-rare genera and antibiotic resistance genes (ARGs) to azithromycin (AZM, 0.05-40 mg/L) and copper (1 mg/L) combined pollution in activated sludge nitrification system at low temperature. Nitrification was as expected inhibited in stress- and post-effects periods under AZM concentration higher than 5 mg/L. Abundant and rare taxa presented dissimilar responses based on full-scale classification. Conditionally rare or abundant taxa (CRAT) were keystone taxa. Relative abundance of ammonia-oxidizing archaea increased, and three aerobic denitrifying bacteria (Brevundimonas, Comamonas and Trichococcus) were enriched (from 9.83% to 68.91% in total). Ammonia nitrogen assimilating into Org-N and denitrification may be nitrogen pathways based on predict analysis. 29 ARGs were found with more co-occurrence patterns and high concentration of AZM (greater than 5 mg/L) caused their proliferation. Importantly, expect for some abundant taxa, rare taxa, potential pathogens and nitrogen-removal functional genera were the main potential hosts of ARGs.

Response of anammox granules to the simultaneous exposure to macrolide and aminoglycoside antibiotics: Linking performance to mechanism

Antibiotic pollution is becoming increasingly severe due to its extensive use. The potential application of the anaerobic ammonium oxidation (anammox) process in the treatment of wastewater containing antibiotics has attracted much attention. As common antibiotics, spiramycin (SPM) and streptomycin (STM) are widely used to treat human and animal diseases. However, their combined effects on the anammox process remain unknown. Therefore, this study systematically evaluated the response of the anammox process to both antibiotics. The half maximal inhibitory concentrations of SPM and STM were determined. The continuous-flow anammox system could adapt to SPM and STM at low concentrations, while antibiotics at high concentrations exhibited inhibitory effects. When the concentrations reached 5 mg L^-1 SPM and 50 mg L^-1 STM, the nitrogen removal efficiency dramatically decreased and then rapidly recovered within 8 days. Correspondingly, the abundances of dominant bacteria and genes also changed with antibiotic concentrations. In general, the anammox process showed a stable performance and a high resistance to SPM and STM, suggesting that acclimatization by elevating the concentrations was beneficial for the anammox process to obtain resistance to different antibiotics with high concentrations. This study provides guidance for the stable operation of anammox-based biological treatment of antibiotics containing wastewater.

Antibiotics in wastewater: From its occurrence to the biological removal by environmentally conscious technologies

In this critical review, we explored the most recent advances about the fate of antibiotics on biological wastewater treatment plants (WWTP). Although the occurrence of these pollutants in wastewater and natural streams has been investigated previously, some recent publications still expose the need to improve the detection strategies and the lack of information about their transformation products. The role of the antibiotic properties and the process operating conditions were also analyzed. The pieces of evidence in the literature associate several molecular properties to the antibiotic removal pathway, like hydrophobicity, chemical structure, and electrostatic interactions. Nonetheless, the influence of operating conditions is still unclear, and solid retention time stands out as a key factor. Additionally, the efficiencies and pathways of antibiotic removals on conventional (activated sludge, membrane bioreactor, anaerobic digestion, and nitrogen removal) and emerging bioprocesses (bioelectrochemical systems, fungi, and enzymes) were assessed, and our concern about potential research gaps was raised. The combination of different bioprocess can efficiently mitigate the impacts generated by these pollutants. Thus, to plan and design a process to remove and mineralize antibiotics from wastewater, all aspects must be addressed, the pollutant and process characteristics and how it is the best way to operate it to reduce the impact of antibiotics in the environment.

A critical review on the effects of antibiotics on anammox process in wastewater

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.