Environmental and economical assessment for a sustainable Zn/air battery

A Review of Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Zinc-air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

Extending the Cycle Lifetime of Solid-State Zinc-Air Batteries by Arranging Stable Zinc Species Channels

The solid-state zinc-air batteries have attracted extensive attention due to their high theoretical energy density, high safety, and the compact structure. In this work, a novel hydrogel solid-state electrolyte was developed that was equipped with an interpenetrating network of zinc polyacrylate (PAZn) and polyacrylamide (PAM). At the same time, a cyclodextrin derivative with sulfonate groups was introduced as an additive. From the design of anionic groups in the network, effective and stable channels for zinc species have been established. The unique structure of the additives regulates the uniform deposition of zinc. After using this solid-state electrolyte, the cycle lifetime of solid-state zinc-air batteries assembled have been significantly extended. The byproducts were greatly suppressed and generated the smooth zinc electrode surface after the charge-discharge cycling.

P-doped binary Ni/Fe-N-C for enhanced oxygen electrocatalysis performance

Adjusting the micro-environment of highly dispersive metals on carbon supports has been proved to be effective for achieving enhanced electrocatalysis performance. Herein, we delicately design a phosphorus-doped binary NiFe-nitrogen-carbon material (denoted as P-NiFe-NC), taking advantage of the coupling reaction between phenylphosphonamide (P dopant) and formamide (the carbon and nitrogen sources). The XPS N 1s fine scan reveals the strong interplay of N and P by the positively shifted binding energy of pyridinic N species after P incorporation, and the chemical state of Fe species is influenced accordingly. In addition, the P doping can enlarge the specific surface area and increase the meso/macroporosity of NiFe-NC, thus contributing to the enhancement of mass transfer inside the pores. The P-NiFe-NC sample exhibits favorable bifunctional oxygen electrocatalysis performance, rendering an ORR half-wave potential of 0.85 V and an OER potential of 1.69 V@10.0 mA cm-2, superior to those of P-free NiFe-NC. Assembled into Zn-air batteries, P-NiFe-NC delivers a high specific power of 161.36 mW cm-2 and stable charge/discharge for over 100 h (corresponding to 300 cycles).

Chitin Nanofibrils from Fungi for Hierarchical Gel Polymer Electrolytes for Transient Zinc-Ion Batteries with Stable Zn Electrodeposition

Rechargeable batteries play an integral role toward carbon neutrality. Environmentally sustainable batteries should consider the trade-offs between material renewability, processability, thermo-mechanical and electrochemical performance, as well as transiency. To address this dilemma, we follow circular economy principles to fabricate fungal chitin nanofibril (ChNF) gel polymer electrolytes (GPEs) for zinc-ion batteries. These biocolloids are physically entangled into hierarchical hydrogels with specific surface areas of 49.5 m2 ·g-1 . Ionic conductivities of 54.1 mS·cm-1 and a Zn2+ transference number of 0.468 are reached, outperforming conventional non-renewable/non-biodegradable glass microfibre separator-liquid electrolyte pairs. Enabled by its mechanically elastic properties and large water uptake, a stable Zn electrodeposition in symmetric Zn|Zn configuration with a lifespan above 600 h at 9.5 mA·cm-2 is obtained. At 100 mA·g-1 , the discharge capacity of Zn/α-MnO2 full cells increases above 500 cycles when replacing glass microfiber separators with ChNF GPEs, while the rate performance remains comparable to glass microfiber separators. To make the battery completely transient, the metallic current collectors are replaced by biodegradable polyester/carbon black composites undergoing degradation in water at 70 °C. This work demonstrates the applicability of bio-based materials to fabricate green and electrochemically competitive batteries with potential applications in sustainable portable electronics, or biomedicine.

(Fe-Co-Ni-Zn)-Based Metal-Organic Framework-Derived Electrocatalyst for Zinc-Air Batteries

Zinc-air batteries (ZABs) have garnered significant interest as a viable substitute for lithium-ion batteries (LIBs), primarily due to their impressive energy density and low cost. However, the efficacy of zinc-air batteries is heavily dependent on electrocatalysts, which play a vital role in enhancing reaction efficiency and stability. This scholarly review article highlights the crucial significance of electrocatalysts in zinc-air batteries and explores the rationale behind employing Fe-Co-Ni-Zn-based metal-organic framework (MOF)-derived hybrid materials as potential electrocatalysts. These MOF-derived electrocatalysts offer advantages such as abundancy, high catalytic activity, tunability, and structural stability. Various synthesis methods and characterization techniques are employed to optimize the properties of MOF-derived electrocatalysts. Such electrocatalysts exhibit excellent catalytic activity, stability, and selectivity, making them suitable for applications in ZABs. Furthermore, they demonstrate notable capabilities in the realm of ZABs, encompassing elevated energy density, efficacy, and prolonged longevity. It is imperative to continue extensively researching and developing this area to propel the advancement of ZAB technology forward and pave the way for its practical implementation across diverse fields.

Bifunctional P-Containing RuO2 Catalysts Prepared from Surplus Ru Co-Ordination Complexes and Applied to Zn/Air Batteries

An innovative synthetic route that involves the thermal treatment of selected Ru co-ordination complexes was used to prepare RuO₂-based materials with catalytic activity for oxygen reduction (ORR) and oxygen evolution (OER) reactions. Extensive characterization confirmed the presence of Ru metal and RuP₃O₉ in the materials, with an improved electrocatalytic performance obtained from calcinated [(RuCl₂(PPh₃)₃]. A mechanistic approach for the obtention of such singular blends and for the synergetic contribution of these three species to electrocatalysis is suggested. Catalysts added to carbon-based electrodes were also tested in all-solid and flooded alkaline Zn/air batteries. The former displayed a specific discharge capacity of 10.5 A h g^-1 at 250 mA g^-1 and a power density of 4.4 kW kg^-1 cm^-2. Besides, more than 800 discharge/charge cycles were reached in the flooded alkaline Zn/air battery.

Comparison of cracking activity of the core-shell composite MCM-41/HY & MCM-48/HY catalysts in the synthesis of organic liquid fuel from Mahua oil

A synergistic catalyst was architectured using the hydrothermal crystallization method. Mesoporous material with pore diameter less than 20 nm was grown on the microporous Zeolite HY. The catalysts were characterized by XRD, ICP-OES, BET, TPD, SEM and TEM techniques. The SEM picture portrayed excellent core - shell morphology and TEM analysis corresponded to the XRD reports. Mahua oil was cracked in a pilot scale reactor over the synthesized catalysts at an optimized reaction condition (Temperature: 400 ^οC; WHSV: 4.6 h^-1). The gaseous and liquid products of reaction were analyzed by Residual Gas analyzer and GCMS respectively. The NMR spectral analysis of fuel showed low traces of aromatics. The produced fuel was analyzed for its significant properties like calorific value, fire point, flash point and viscosity.

Properties of the PVA-VAVTD KOH Blend as a Gel Polymer Electrolyte for Zinc Batteries

Rechargeable zinc-air batteries are promising for energy storage and portable electronic applications because of their good safety, high energy density, material abundance, low cost, and environmental friendliness. A series of alkaline gel polymer electrolytes formed from polyvinyl alcohol (PVA) and different amounts of terpolymer composed of butyl acrylate, vinyl acetate, and vinyl neodecanoate (VAVTD) was synthesized applying a solution casting technique. The thin films were doped with KOH 12M, providing a higher amount of water and free ions inside the electrolyte matrix. The inclusion of VAVTD together with the PVA polymer improved several of the electrical properties of the PVA-based gel polymer electrolytes (GPEs). X-ray diffraction (XRD), thermogravimetric analysis (TGA), and attenuated total reflectance- Fourier-transform infrared spectroscopy (ATR-FTIR) tests, confirming that PVA chains rearrange depending on the VAVTD content and improving the amorphous region. The most conducting electrolyte film was the test specimen 1:4 (PVA-VAVTD) soaked in KOH solution, reaching a conductivity of 0.019 S/cm at room temperature. The temperature dependence of the conductivity agrees with the Arrhenius equation and activation energy of ~0.077 eV resulted, depending on the electrolyte composition. In addition, the cyclic voltammetry study showed a current intensity increase at higher VAVTD content, reaching values of 310 mA. Finally, these gel polymer electrolytes were tested in Zn-air batteries, obtaining capacities of 165 mAh and 195 mAh for PVA-T4 and PVA-T5 sunk in KOH, respectively, at a discharge current of -5 mA.

Technical optimization and life cycle assessment of environment-friendly superplasticizer for concrete engineering

With the rapid development of the construction industry, it is necessary to synthesize environment-friendly functional polymers, especially when developing "green" construction industry types. Herein a novel solid-state polycarboxylate superplasticizer (PCE) with low energy-consumption was designed and synthesized. In industrial application, solid-state PCE has exhibited better cement paste fluidity and concrete slump compared to liquid-state PCE. A life cycle assessment (LCA) of the PCE synthesis, the packaging materials used, and the transportation of the PCE were conducted based on the ReCiPe method. The results indicated that liquid-state PCE has a far greater environmental impact at >60% than solid-state PCE, which is less significant at <40%. The inventory data that are associated with the production of the new polymer are disclosed for the first time to enrich the related database in this field. This study demonstrates the optimization of the state and synthesis technique of a functional polymer, improving the performance and lowering the environmental impacts involved in producing the polymer, while reducing the risks to human health and protecting the ecosystem at the same time.

Environmental impacts of solar energy systems: A review

The annual increases in global energy consumption, along with its environmental issues and concerns, are playing significant roles in the massive sustainable and renewable global transmission of energy. Solar energy systems have been grabbing most attention among all the other renewable energy systems throughout the last decade. However, even renewable energies can have some adverse environmental repercussions; therefore, further attention and proper precautional procedures should be given. This paper discusses in detail the environmental impacts of several commercial and emerging solar energy systems at both small- and utility-scales. The study expands to some of the related advances, as well as some of the essential elements in their systems. The approach follows all the stages, starting with the designs, then throughout their manufacturing, materials, construction or installation phases, and over operation lifetime and decommissioning. Specific solutions for most systems such as waste minimization and recycling are discussed, alongside with some technically and ecologically favorable recommendations for mitigating the impacts.

A Review of the Use of GPEs in Zinc-Based Batteries. A Step Closer to Wearable Electronic Gadgets and Smart Textiles

With the flourish of flexible and wearable electronics gadgets, the need for flexible power sources has become essential. The growth of this increasingly diverse range of devices boosted the necessity to develop materials for such flexible power sources such as secondary batteries, fuel cells, supercapacitors, sensors, dye-sensitized solar cells, etc. In that context, comprehensives studies on flexible conversion and energy storage devices have been released for other technologies such Li-ion standing out the importance of the research done lately in GPEs (gel polymer electrolytes) for energy conversion and storage. However, flexible zinc batteries have not received the attention they deserve within the flexible batteries field, which are destined to be one of the high rank players in the wearable devices future market. This review presents an extensive overview of the most notable or prominent gel polymeric materials, including biobased polymers, and zinc chemistries as well as its practical or functional implementation in flexible wearable devices. The ultimate aim is to highlight zinc-based batteries as power sources to fill a segment of the world flexible batteries future market.

Life Cycle Assessment of Classic and Innovative Batteries for Solar Home Systems in Europe

This paper presents an environmental sustainability assessment of residential user-scale energy systems, named solar home systems, encompassing their construction, operation, and end of life. The methodology adopted is composed of three steps, namely a design phase, a simulation of the solar home systems’ performance and a life cycle assessment. The analysis aims to point out the main advantages, features, and challenges of lithium-ion batteries, considered as a benchmark, compared with other innovative devices. As the environmental sustainability of these systems is affected by the solar radiation intensity during the year, a sensitivity analysis is performed varying the latitude of the installation site in Europe. For each site, both isolated and grid-connected solar home systems have been compared considering also the national electricity mix. A general overview of the results shows that, regardless of the installation site, solid state nickel cobalt manganese and nickel cobalt aluminium lithium-ion batteries are the most suitable choices in terms of sustainability. Remarkably, other novel devices, like sodium-ion batteries, are already competitive with them and have great potential. With these batteries, the solar home systems’ eco-profile is generally advantageous compared to the energy mix, especially in on-grid configurations, with some exceptions.