Competitive and non-competitive zinc, copper and lead biosorption from aqueous solutions onto flax fibers

Recycled Jute Non-Woven Material Coated with Polyaniline/TiO2 Nanocomposite for Removal of Heavy Metal Ions from Water

Growing volumes of textile waste and heavy metal pollution of water are emerging environmental challenges. In an attempt to tackle these issues, a non-woven sorbent based on jute fibers was fabricated by recycling the textile waste from the carpet industry. The influence of contact time, concentration, pH and temperature on the sorption of lead and copper ions from aqueous solutions was studied. In order to enhance the sorption capacity of the non-woven material, in situ synthesis of polyaniline (PANI) in the presence of TiO2 nanostructures was performed. The contribution of TiO2 nanoparticles and TiO2 nanotubes to the uniformity of PANI coating and overall sorption behavior was compared. Electrokinetic measurements indicated increased swelling of modified fibers. FTIR and Raman spectroscopy revealed the formation of the emeraldine base form of PANI. FESEM confirmed the creation of the uniform nanocomposite coating over jute fibers. The modification with PANI/TiO2 nanocomposite resulted in a more than 3-fold greater sorption capacity of the material for lead ions, and a 2-fold greater absorption capacity for copper ions independently of applied TiO2 nanostructure. The participation of both TiO2 nanostructures in PANI synthesis resulted in excellent cover of jute fibers, but the form of TiO2 had a negligible effect on metal ion uptake.

Interactions of binary mixtures of metals on rainbow trout (Oncorhynchus mykiss) heart mitochondrial H2O2 homeodynamics

For continuous pumping of blood, the heart needs a constant supply of energy (ATP) that is primarily met via oxidative phosphorylation in the mitochondria of cardiomyocytes. However, sustained high rates of electron transport for energy conversion redox reactions predisposes the heart to the production of reactive oxygen species (ROS) and oxidative stress. Mitochondrial ROS are fundamental drivers of responses to environmental stressors including metals but knowledge of how combinations of metals alter mitochondrial ROS homeodynamics remains sparse. We explored the effects and interactions of binary mixtures of copper (Cu), cadmium (Cd), and zinc (Zn), metals that are common contaminants of aquatic systems, on ROS (hydrogen peroxide, H2O2) homeodynamics in rainbow trout (Oncorhynchus mykiss) heart mitochondria. Isolated mitochondria were energized with glutamate-malate or succinate and exposed to a range of concentrations of the metals singly and in equimolar binary concentrations. Speciation analysis revealed that Cu was highly complexed by glutamate or Tris resulting in Cu2+ concentrations in the picomolar to nanomolar range. The concentration of Cd2+ was 7.2-7.5 % of the total while Zn2+ was 15 % and 21 % of the total during glutamate-malate and succinate oxidation, respectively. The concentration-effect relationships for Cu and Cd on mitochondrial H2O2 emission depended on the substrate while those for Zn were similar during glutamate-malate and succinate oxidation. Cu + Zn and Cu + Cd mixtures exhibited antagonistic interactions wherein Cu reduced the effects of both Cd and Zn, suggesting that Cu can mitigate oxidative distress caused by Cd or Zn. Binary combinations of the metals acted additively to reduce the rate constant and increase the half-life of H2O2 consumption while concomitantly suppressing thioredoxin reductase and stimulating glutathione peroxidase activities. Collectively, our study indicates that binary mixtures of Cu, Zn, and Cd act additively or antagonistically to modulate H2O2 homeodynamics in heart mitochondria.

Potentials of mono- and multi-metal ion removal from water with cotton stalks and date palm stone residuals

In this work, cotton stalks (Gossypium barbadense) and date palm stones (Phoenix dactylifera) have been used as biosorbents to remove cadmium; Cd(II), lead; Pb(II), and zinc; Zn(II) from mono- and multi-solutions. Each biosorbent was characterized using SEM-EDX, and FT-IR. The findings showed that pH, dose, contact time, metal concentration, and particle size affect the treatment process. The adsorption pattern was Pb(II) > Cd(II) > Zn(II) for both biosorbents. The adsorption performance of cotton stalks was higher than that of date palm stones. The fitted maximum uptake capacities; qm of cotton stalks were higher than those of date palm stones. The maximum adsorption at optimum conditions of Pb(II), Cd(II), and Zn(II) with cotton stalks were 98%, 92.1%, and 78.9%, respectively, within 30 min. While the maximum adsorption of Pb(II), Cd(II), and Zn(II) with date palm stones were 94.6%, 76%, and 68.6%, respectively. Results confirmed the antagonistic effect of heavy metal removal at optimum conditions. Biosorbents could remove ~ 100% of the metal ions from real wastewater samples. Regeneration investigation revealed a successful reusability of both biosorbents for four cycles.

Potential of using Alfa grass fibers (Stipa Tenacissima L.) to remove Pb2+, Cu2+, and Zn2+ from an aqueous solution

This study used alfa grass fibres as a natural low-cost adsorbent to remove lead, copper, and zinc ions from aqueous solutions. The adsorbent was characterized by FTIR, SEM, BET surface area, ATG, and XRD techniques. The effects of pH, contact time, initial metal concentration, and adsorbent dosage on the adsorption efficiency were evaluated in batch experiments. The results showed that the adsorption of all metals was fast, and optimal removal efficiency was achieved within 25 min of contact time using 5000 mg/L of Alfa fibres at pH 6.3. The adsorption selectivity order was Pb2+ > Cu2+ > Zn2+ with Pb2+ removal efficiencies up to 97.6%. The adsorption kinetics were best explained by a pseudo-second-order kinetic model. The experimental adsorption data fitted very well with the Langmuir isotherm model, and less well with the Freundlich and Temkin isotherm models. The maximum adsorption capacities were respectively 14.492, 11.904, and 8.695 mg/g for Pb2+, Cu2+, and Zn2+. The results of this study indicated that Alfa fibres could be used as effective adsorbent for the removal of Pb2+, Cu2+, and Zn2+ from aqueous solutions.

Heavy Metal Ions(II) Sorption by a Cellulose-Based Sorbent Containing Sulfogroups

This article concerns the effect of the chemical modification of short flax fiber on its sorption properties for heavy metal ions. The main purpose of the modification was to achieve the oxidation of flax cellulose with sodium metaperiodate to form dialdehyde cellulose. Additionally, the research shows the subsequent interaction of dialdehyde cellulose with 1-amino-8-hydroxynaphthalene-3,6-disulfonic acid and its transformation into a derivative capable of forming chelate complexes with heavy metal ions. Additionally, this article presents the results of equilibrium and kinetics studies of the sorption of Cu(II), Cd(II), and Fe(II) ions from aqueous solutions by primary and modified cellulose sorbents. SEM spectra indicate changes in the surface structure of the modified sorbents compared to the original one. IR spectra show the appearance of amino- and sulfogroups in short flax fibers in the process of their modification. The research revealed the efficiency of the method and the possibility of its use for the purification of aqueous solutions from heavy metal ions in industrial processes.

Selenium and vitamin E ameliorate lead acetate-induced hepatotoxicity in rats via suppression of oxidative stress, mRNA of heat shock proteins, and NF-kB production

BACKGROUND

Lead exposure results in a terrible rise in heat shock protein levels.

OBJECTIVE

This research was conducted to look at the effects of lead poisoning on heat shock response, oxidative stress, and inflammatory markers in albino rats, as well as the power of selenium and vitamin E to resist lead toxic effects.

METHODS

Eight groups of albino rats are used. Each group contained six rats where the first group represented the negative control, and the other groups were treated with olive oil, vitamin E, selenium, lead, (vitamin E + lead), (selenium + lead), and (vitamin E + selenium + lead). All the treatments lasted for 28 days. Then, the mRNA expression of interested heat shock proteins (HSP90, HSP70, and HSP60) was assessed. For oxidative stress disruption, we investigated nitric oxide (NO) and malondialdehyde (MDA) content, and enzymatic and non-enzymatic antioxidants activity respectively in rat livers.

RESULTS

our results revealed the synergetic protective effect of the combination of two antioxidants (vitamin E and selenium) against lead poising. This was clear in regulating HSPs expression, inflammatory markers, glucose, lipid profile, liver functions, and antioxidant enzymes more than the treatment with one antioxidant.

CONCLUSION

Pb is a toxic material that can induce HSPs and inflammatory markers expression. Selenium and vitamin E can give excellent effects in ameliorating Pb toxicity when used together.

Kinetic and isotherm of competitive adsorption cadmium and lead onto Saccharomyces cerevisiae autoclaved cells

Heavy metal pollution has been regarded as a significant public health hazard during the industrialization, which also have exhibited various types of toxicological manifestations. Moreover, due to the high cost and toxic by-products, some conventional remediation methods were limited to heavy metals pollution control. In this work, autoclaved Saccharomyces cerevisiae was used as a biosorbent for the removal of Cd2+ and Pb2+ from single and binary ions aqueous solution system. The kinetics and isotherm of Cd2+ and Pb2+ were studied in different ion systems. The results showed that the competitive adsorption ability of S. cerevisiae to Pb2+ was stronger than that to Cd2+ in binary ions solution. To all the single ion solution of Cd2+ or Pb2+ and binary ions solution of Cd2+-Pb2+, there always existed that the adsorption of metal ions on S. cerevisiae fitted well with pseudo-second-order kinetic model and Langmuir isotherms model. The adsorption quantity qt in different solutions followed the sequence as qt (Cd2+-Pb2+) > qt (Pb2+-single) > qt (Pb2+-binary) > qt (Cd2+-single) > qt (Cd2+-binary). The autoclaved S. cerevisiae used in this research was one kind of rapid and favourable biosorbent for Pb2+ and Cd2+. In Pb2+ and Cd2+-containing solutions, sites competition and jointed toxicity of Pb2+ and Cd2+ on S. cerevisiae cells were the key to the total adsorption effect, and further researches were necessary in the next work. Thus, the current research presented that the autoclaved S. cerevisiae could be applied as an effective biosorbent for heavy metal adsorption from water environment and the design of eco-friendly technologies for the treatment of waste liquor.

Ability of Cupriavidus necator H16 to resist, bioremove, and accumulate some hazardous metal ions in water

Bacterial biomasses are suitable and inexpensive biosorbents for the removal of metal ions. The Gram-negative betaproteobacterium Cupriavidus necator H16 is found in soil and freshwater environments. In this study, C. necator H16 was used to remove chromium (Cr), arsenic (As), aluminum (Al), and cadmium (Cd) ions from water. Minimum inhibition concentration (MIC) values of C. necator to Cr, As, Al, and Cd were found as 76, 69, 341, and 275 mg/L, respectively. The highest rates of Cr, As, Al, and Cd bioremoval were 45, 60, 54, and 78%, respectively. pH levels between 6.0 and 8.0 and an average temperature of 30 °C were optimum for the most efficient bioremoval. Scanning electron microscopy (SEM) images of Cd-treated cells showed that the morphology of the cells was significantly impaired compared to the control. Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the Cd-treated cell walls also confirmed the presence of active groups. As a result, it can be said that C. necator H16 has a moderate bioremoval efficiency for Cr, As, and Al and a high bioremoval efficiency for Cd.

Insights into the Mechanisms Involved in Lead (Pb) Tolerance in Invasive Plants-The Current Status of Understanding

Invasive plant species possess remarkable abilities to establish themselves in new environments and to displace native species. Their success can be attributed to various physiological and biochemical mechanisms, allowing them to tolerate adverse environmental conditions, including high lead (Pb) toxicity. Comprehension of the mechanisms responsible for Pb tolerance in invasive plants is still limited, but it is rapidly evolving. Researchers have identified several strategies in invasive plants to tolerate high levels of Pb. This review provides an overview of the current understanding of the ability of invasive species to tolerate or even accumulate Pb in plant tissues, including vacuoles and cell walls, as well as how rhizosphere biota (bacteria and mycorrhizal fungi) help them to enhance Pb tolerance in polluted soils. Furthermore, the article highlights the physiological and molecular mechanisms regulating plant responses to Pb stress. The potential applications of these mechanisms in developing strategies for remediating Pb-contaminated soils are also discussed. Specifically, this review article provides a comprehensive understanding of the current status of research on the mechanisms involved in Pb tolerance in invasive plants. The information presented in this article may be useful in developing effective strategies for managing Pb-contaminated soils, as well as for developing more resilient crops in the face of environmental stressors.

Insights into the Applications of Natural Fibers to Metal Separation from Aqueous Solutions

There is a wide range of renewable materials with attractive prospects for the development of green technologies for the removal and recovery of metals from aqueous streams. A special category among them are natural fibers of biological origin, which combine remarkable biosorption properties with the adaptability of useful forms for cleanup and recycling purposes. To support the efficient exploitation of these advantages, this article reviews the current state of research on the potential and real applications of natural cellulosic and protein fibers as biosorbents for the sequestration of metals from aqueous solutions. The discussion on the scientific literature reports is made in sections that consider the classification and characterization of natural fibers and the analysis of performances of lignocellulosic biofibers and wool, silk, and human hair waste fibers to the metal uptake from diluted aqueous solutions. Finally, future research directions are recommended. Compared to other reviews, this work debates, systematizes, and correlates the available data on the metal biosorption on plant and protein biofibers, under non-competitive and competitive conditions, from synthetic, simulated, and real solutions, providing a deep insight into the biosorbents based on both types of eco-friendly fibers.

Desorption of zinc, copper and lead ions from loaded flax fibres

Biosorption is an efficient and cost-effective method for heavy metals' remediation. However, saturated biosorbents may pose a serious problem for the environment. Flax fibres have shown very good adsorption capacities to remove zinc, copper and lead ions from contaminated aqueous solutions. In this study, adsorption-desorption cycles were conducted with loaded flax fibres in batch mode to recover heavy metals using four types of solutions: hydrochloric acid solution, nitric acid solution, sodium hydroxide solution and ultrapure water. Desorption kinetic studies, conducted with loaded flax fibres, showed very fast desorption of zinc, copper and lead when using nitric and hydrochloric acids with a selectivity sequence of Zn (totally desorbed) > Cu (94%) > Pb (80-73%). Desorption kinetic was slower with the use of sodium hydroxide and showed much lower desorption rates of Zn (62%) > Pb (12%) > Cu (7%). Desorption of zinc and copper from previously loaded fibres from binary metal ion system in lead solution was also investigated. Different concentrations ranging from 0.04 to 0.20 mmol/L were tested. The obtained results demonstrated a significant release in the order Zn (18-90%) > Cu (2-42%), while lead was still efficiently adsorbed. Retention efficiencies of zinc and copper and adsorption efficiency of lead resulted in the same adsorption efficiencies of the three metal ions onto flax fibres in the ternary metal ion system.

Bio-Based Adsorption as Ecofriendly Method for Wastewater Decontamination: A Review

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

Biosorption of Cadmium and Lead by Dry Biomass of Nostoc sp. MK-11: Kinetic and Isotherm Study

Cadmium (Cd) and lead (Pb) are global environmental pollutants. In this study, Nostoc sp. MK-11 was used as an environmentally safe, economical, and efficient biosorbent for the removal of Cd and Pb ions from synthetic aqueous solutions. Nostoc sp. MK-11 was identified on a morphological and molecular basis using light microscopic, 16S rRNA sequences and phylogenetic analysis. Batch experiments were performed to determine the most significant factors for the removal of Cd and Pb ions from the synthetic aqueous solutions using dry Nostoc sp. MK1 biomass. The results indicated that the maximum biosorption of Pb and Cd ions was found under the conditions of 1 g of dry Nostoc sp. MK-11 biomass, 100 mg/L of initial metal concentrations, and 60 min contact time at pH 4 and 5 for Pb and Cd, respectively. Dry Nostoc sp. MK-11 biomass samples before and after biosorption were characterized using FTIR and SEM. A kinetic study showed that a pseudo second order kinetic model was well fitted rather than the pseudo first order. Three isotherm models Freundlich, Langmuir, and Temkin were used to explain the biosorption isotherms of metal ions by Nostoc sp. MK-11 dry biomass. Langmuir isotherm, which explains the existence of monolayer adsorption, fitted well to the biosorption process. Considering the Langmuir isotherm model, the maximum biosorption capacity (q_max) of Nostoc sp. MK-11 dry biomass was calculated as 75.757 and 83.963 mg g^-1 for Cd and Pb, respectively, which showed agreement with the obtained experimental values. Desorption investigations were carried out to evaluate the reusability of the biomass and the recovery of the metal ions. It was found that the desorption of Cd and Pb was above 90%. The dry biomass of Nostoc sp. MK-11 was proven to be efficient and cost-effective for removing Cd and especially Pb metal ions from the aqueous solutions, and the process is eco-friendly, feasible, and reliable.

Use of COMSOL software for modeling and simulation of copper removal in a dynamic mode on a new biowaste

The main purpose of this investigation is to model the results related to biosorption using COMSOL (Multiphysics 4.3a), and to solve the advection-dispersion equation by using both linear and Langmuir models. A bidimensional model was then proposed to study the mass transfer in the process of copper ions sorption in a dynamic mode on cider vinegar residues. Sorption tests were realized by evaluating the influence of flow rate (0.75, 1, and 2.65 ml min^-1 ), bed height (3.5, 7 and 8.5 cm), and copper initial concentration (169 and 300 mg L^-1 ). For all cases, the mathematical formulation was solved by assuming that the column is homogeneous and the sorption is instantaneous. The corresponding results were exploited through breakthrough curve profiles, where it was shown that the solutions obtained by the "Langmuir COMSOL" model coincide with the experimental values. In contrast, the linear model has been unable to fit them. The optimal results were analyzed by Thomas, Adam-Bohart Yoon Nelson, and Ogata-Bank models, which proves that the Thomas method is well adapted with a satisfactory correlation coefficient (0.93). Further, the model validation was performed by determining the residual root mean square error, which was found less than 0.3, thereby indicating a reasonable concordance between the estimated and experimental points. The high sorption capacity obtained was around of 41.37 mg g^-1 , which suggests that the cider vinegar residues can be exploited as a low-cost, available, and effective sorbent biomass in the field of the treatment of industrial effluents. PRACTITIONER POINTS: Cider vinegar residues (CVR) as low cost biosorbent were studied for continuous biosorption. A successful COMSOL model was proposed and validated. CVR is an effective biosorbent for copper fixed bed biosorption. High sorption capacity was around of 41.37 mg g^-1 under optimal conditions.

Potentiality of phosphorus-accumulating organisms biomasses in biosorption of Cd(II), Pb(II), Cu(II) and Zn(II) from aqueous solutions: Behaviors and mechanisms

Heavy metal pollution is consistently a critical global issue, and bioremediation is regarded as one of the most promising approaches. In this work, the biosorption characteristics of Cd(II), Pb(II), Cu(II) and Zn(II) from aqueous solutions using three phosphorus-accumulating organisms (PAOs) biomasses, Ochrobactrum cicero (PAB-006), Stenotrophomonas maltophilia (PAB-009), and Pseudomonas putida (PAB-0031), as biosorbents were investigated. Results indicated that the equilibrium biosorption capacities of biosorbents to heavy metal ions were sensitive to the solution pH, and increased with increasing pH values. The experimental data of Cd(II), Pb(II), Cu(II) and Zn(II) biosorption were in good agreement with the Pseudo-second-order, Redlich-Peterson and Temkin models, implying that the biosorption was a hybrid chemical reaction-biosorption process. In addition, the theoretical maximum biosorption capacities of Cd(II), Pb(II), Cu(II) and Zn(II) were calculated to be 67.84, 80.23, 50.56 and 63.07 mg/g for PAB-006, 59.99, 87.71, 39.26 and 64.00 mg/g for PAB-009 and 68.31, 85.43, 38.97 and 62.85 mg/g for PAB-031, respectively (pH = 5.0 ± 0.1, T = 25 °C), according to the parameters of the Langmuir model. Moreover, ionic strength had negligible influences or slight promoting effects, while humic acid exhibited positive effects on the removal of heavy metals. Further, PABs were stable and displayed excellent reusability. Characterization techniques of FTIR and XPS revealed that surface complexation, ion exchange, hydrogen bonding and electrostatic interaction were the main mechanisms involved in the biosorption process. In summary, the biosorbent PABs possessed high biosorption performance with excellent reusability, and which hold the great application prospect in the treatment of heavy metal contaminated water.

Biosorption of heavy metal ions by green alga Neochloris oleoabundans: Effects of metal ion properties and cell wall structure

Effects of metal ion proprieties and the cell wall structure of green alga Neochloris oleoabundans were investigated on five strategically selected heavy metal ions, Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II). The biosorption of these ions were energy-independent and spontaneous Langmuir adsorption. The adsorption capacities of Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II) were determined to be 1.03, 0.91, 1.20, 0.65 and 1.23 mmol/g, respectively. Data suggest that peptide-containing molecules and non-cellulosic polysaccharides on cell wall were the primary sites of adsorption. Ion Pb(II) showed the strongest inhibitive effects on the adsorption of other metal ions on cells in binaries, corresponding to its large affinity to the biosorbents, which was next only to that of Cu(II). A linear relation was established for the first time between the adsorption capacity and the impact factor, which is defined in this paper as the electronegativity of a metal ion normalized by its atomic radius. In other words, adsorption capacity of N. oleoabundans biomass to the tested two-valence metal ions is proportional to the electronegativity and inversely proportional to the radius of the metal ions. Cell aggregation was caused by the addition of Cu(II), which exhibited distinctive adsorption behaviors than other metal ions.

One-step synthesis of cake-like biosorbents from plant biomass for the effective removal and recovery heavy metals: Effect of plant species and roles of xanthation

The continuous production of plant wastes and heavy metal pollution of waters have become widespread unavoidable challenges. Reutilization of plant wastes to treat toxic metal-contaminated water is an eco-friendly way to simultaneously solve these problems. Herein, three cake-like biosorbents were synthesized from tea waste, trimmed lawn grass and Nephrolepis cordifolia leaves through a one-step xanthation modification method combined with lyophilization, respectively. The plant species affected the appearance, structure and mechanical strength of the biosorbents due to the different contents of hydrocarbons and inorganic substances, which influenced the gel-like degree and thus the ability of the particles to pack between water molecules. The maximum adsorption capacities of the modified materials for Pb(II), Cu(II) and Cd(II) were 247.20, 85.80 and 265.31 mg/g, respectively, far higher than those of the original wastes, and the adsorption was selective. These results were mainly attributed to newly introduced -(CS)-S-Na groups, which triggered ion exchange, complexation and microprecipitation between heavy metal ions and functional groups. As-prepared biosorbents owned an excellent regenerability, which contributed to recovery heavy metals. The physicochemical properties and adsorption performances of the modified materials indicated that xanthation is a universal modification method suited to different plant biomasses with great potential to purify heavy metal-contaminated water. These biosorbents with excellent separability and regenerability might be promising for continuous-flow sewage treatment.