High-flux TFN nanofiltration membranes incorporated with Camphor-Al2O3 nanoparticles for brackish water desalination

Chitosan-Camphor Beads as a Novel Starting Biomaterial: Insights Into Methodological Approaches for Preparation

Biomaterials with antimicrobial and muco-adhesive properties represent an efficient system for different applications. In this paper, a new biomaterial based on chitosan-camphor beads and their crosslinked form with glutaraldehyde was optimized. Low and high molecular weight chitosan were considered. After an optimization procedure of blank beads preparation, various strategies were used to load camphor into chitosan beads where eight different beads suspensions were characterized for their size and encapsulation efficiency of camphor. Powdered camphor was added to the chitosan solution during the beads preparation or to preformed beads while it was dissolving in water or in 2% acetic acid solution. Results showed that, camphor addition to chitosan solution led to the formation of homogeneous suspensions with reproducible and higher encapsulation efficiencies of camphor compared to the other formulations, irrespective of the chitosan weight. In addition, these beads were stable for 1 month of storage at 4°C. The camphor loaded cross-linked beads with glutaraldehyde (referred to as Cam-beads-GA) were more stable than noncross-linked beads (Cam-beads), which also demonstrated satisfactory stability results. Camphor embedding in chitosan beads was proven to occur through hydrogen bonding and potentially imine bonds by FTIR analysis. The optimized formulations constitute a suitable delivery system for other bioactive agents.

Influence of ozone supply mode and aeration on photocatalytic ozonation of organic pollutants in wastewater using TiO2 and ZnO nanoparticles

Photocatalytic ozonation, which combines the effects of lighting and ozonation, has been shown to enhance the decolorization and degradation of organic pollutants in wastewater. Dye solutions with concentrations of 10 ppm for both methylene blue and methyl orange dyes were used. The influence of ozoneation on the performance of photocatalytic activity of TiO2 and ZnO nanoparticles for the removal of organic dyes from aqueous solutions was investigated. To evaluate their efficacy for the removal of methylene blue and methyl orange dyes from aqueous solutions, the photocatalysts were exposed to UV light for 90 min, with ozone supplied either intermittently or continuously by an SDBD cold plasma reactor. The photocatalysts utilized in this study were characterized using SEM and XRD techniques. The degree of color degradation was determined using UV-Vis spectroscopy. The results demonstrate that TiO2 and ZnO nanoparticles exhibit different degrees of photocatalytic activity for the two dyes. The addition of ozone was found to enhance both the color degradation and mineralization rates of the pollutants, with intermittent ozonation proving more effective than continuous ozonation. The most significant color degradation results were obtained using TiO2 nanoparticles with intermittent ozonation for methylene blue dye (97 %) and ZnO nanoparticles with intermittent ozonation for methyl orange dye (40 %). Overall, this study provides evidence that photocatalytic ozonation represents a promising technique for water treatment.

Thin-Film Nanocomposite (TFN) Membranes for Water Treatment Applications: Characterization and Performance

Thin-film nanocomposite (TFN) membranes have been widely investigated for water treatment applications due to their promising performance in terms of flux, salt rejection, and their antifouling properties. This review article provides an overview of the TFN membrane characterization and performance. It presents different characterization techniques that have been used to analyze these membranes and the nanofillers within them. The techniques comprise structural and elemental analysis, surface and morphology analysis, compositional analysis, and mechanical properties. Additionally, the fundamentals of membrane preparation are also presented, together with a classification of nanofillers that have been used so far. The potential of TFN membranes to address water scarcity and pollution challenges is significant. This review also lists examples of effective TFN membrane applications for water treatment. These include enhanced flux, enhanced salt rejection, antifouling, chlorine resistance, antimicrobial properties, thermal stability, and dye removal. The article concludes with a synopsis of the current status of TFN membranes and future perspectives.

Dual-layer Janus charged nanofiltration membranes constructed by sequential electrospray polymerization for efficient water softening

The separation of hardness ions such as calcium and magnesium from hard water can improve water quality, which is important but technically challenging. Nanofiltration (NF) has attracted much attention because of its efficiency, environmental friendliness and low cost. However, common NF membranes with a singly (either positively or negatively) charged layer have insufficient water softening capacity. In this work, two types of dual-layer Janus charged polyamide NF membranes composed of oppositely charged inner and outer layers were developed for the first time by sequential electrospray polymerization strategy for efficient water softening. The effect of the microstructure of the dually charged barrier layer on the separation performance of divalent salt ions was explored. Detailed mechanistic studies revealed that the microstructure of the outer layer of the barrier layer played a crucial role in the ion separation of the Janus membrane due to its control of the reverse transport of ions. Janus charged polyamide NF membrane with a loose outer layer exhibited better water softening performance (93.6% of hardness removed) compared to the singly charged NF membranes due to the simultaneous dual electrostatic effect and no ion reverse transport confinement. This Janus charged NF membrane also possessed good antifouling performance, mainly due to its negatively charged outer layers. The mechanistic insights gained in this study reveal the huge potential of microstructural design toward high-performance Janus charged NF membranes, and provide important guidance on the future development of high-efficiency water softening NF membranes.

Fabrication of cerium titanate cellulose fiber nanocomposite materials for the removal of methyl orange and methylene blue from polluted water by photocatalytic degradation

In this study, cellulose fibers (Cf), extracted from sunflower seed husk, and different molar ratios of cerium titanate (Ce-Ti) NPs were prepared from sunflower seed husk extract by a green biosynthesis approach. Cf and Ce-Ti NPs were reacted via cross-linking reaction to synthesize a novel nanocomposite photocatalyst of Ce-Ti/Cf. Using Fourier-transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM-EDX) spectroscopy, all manufactured materials were characterized. The results obtained from FTIR and EDX analyses indicated that Cf and its nanocomposites (0.1 Ce-Ti/Cf, 0.3 Ce-Ti/Cf, and 0.5 Ce-Ti/Cf) were successfully prepared by harnessing biomass extract from sunflower seed husk. Furthermore, XRD revealed that the degree of crystallinity of the nanocomposites was enhanced by increasing the molar ratios of the Ce-Ti NPs. The photocatalytic activity of as-fabricated 0.1 Ce-Ti/Cf, 0.3 Ce-Ti/Cf, and 0.5 Ce-Ti/Cf nanocomposite samples was investigated on methylene blue (MB) and methyl orange (MO) dyes as model organic compounds found in wastewaters. The effects of dose, contact time, and pH on the photocatalytic activity of the synthesized nanocomposites, the photodegradation kinetic parameters of MB, and MO degradation with/without the addition of H2O2 were also studied. The results revealed that high photodegradation efficiency could be obtained as the ratio of TiO2 in the Ce-Ti nanocomposite formula increases. Moreover, after sunlight irradiation, the adsorption capacity and the dye decomposition ratio significantly increase during the early contact time and reach equilibrium at about 240 and 120 min for 0.5 Ce-Ti/Cf nanocomposite photocatalyst in the absence and presence of hydrogen peroxide, respectively. In light of the obtained results and the practical wastewater treatment study conducted, the prepared photocatalyst from Ce-Ti/Cf nanocomposites could be a promising material for treating dye wastewater especially collected from Egypt.

Influence of various shapes of alumina nanoparticle in integrated polysulfone membrane for separation of lignin from woody biomass and salt rejection

Lignin valorization is essential in proposing an economic perspective as a raw material for valuable compounds. The bio-refineries require adequate processing to improve the high purity of lignin. Meanwhile, nanofiltration is fascinated attention to obtain high purity value-added products. The effect of alumina nanoparticles on the fabrication of mixed matrix membranes (MMM) has contributed to improvising filtration performance. However, incorporating nanoparticles is a significant issue regarding appropriate size and shape integrated into membrane for better filtration efficiency. The influence of shapes of alumina nanoparticles has been investigated into polysulfone (PSf) membranes for salt and lignin separation. The morphology of alumina was tailored with spindle, cubic, and spherical shapes synthesized at a different calcination temperature of 250, 500, 700 and 900 °C, respectively. The phase transitions were confirmed in X-ray diffraction (XRD) analysis, and the shape of the nanoparticles was observed in a high-resolution transmission electron microscope (HRTEM). The separation efficiency of membranes was tested with salt rejection using sodium sulfate, calcium chloride, potassium sulfate, and sodium chloride. The lignin was extracted from prehydrolysed sawdust, and the synthetic lignosulfonic acid sodium salt solution was separated. The higher lignin rejection of 98.6% and 97.9% were obtained for cubic shaped gamma phase alumina mixed matrix membrane. The high rejection of lignin occurred due to narrow pores channels that could resist the transfer of lignin through the membrane. The results proved that the controllable organization of PSf/alumina mixed matrix membranes could apply for lignocellulose compounds with good efficiency.

Green synthesis of ZnO, MgO and SiO2 nanoparticles and its effect on irrigation water, soil properties, and Origanum majorana productivity

The synthesis of different metal oxide nanoparticles (NPs) (e.g., ZnO, MgO and SiO₂) using green methods is a promising alternative to traditional chemical methods. In this work, ZnO, MgO, and SiO₂ NPs were prepared using lemon peel extract. The synthesized NPs were characterized using Fourier transform infrared spectroscopy, UV–Visible spectroscopy, X-ray diffraction, and transmission electron microscopy. Also, the effects of the green synthesis of different NPs on the irrigation water quality, the availability of some heavy metals in soil and plants, and the productivity of Origanum majorana (marjoram) were studied in detail. The obtained results showed that the addition of the NPs resulted in noticeable variations in the removal percentages of Cu²⁺ and Fe³⁺ from aqueous solutions. The maximum values obtained for the adsorption of Cu(II) on ZnO, MgO, and SiO₂ NPs within the pH values of 3–5 were 89.9%, 83.3%, and 68.36%, respectively. Meanwhile, the maximum adsorption values of Fe(III) at pH 3.3 were 82%, 80%, and 65% for ZnO, MgO, and SiO₂ NPs, respectively. Clearly, the application of the NPs effectively reduced the available Cu²⁺ in the studied soil samples in the following order: Zn2 > Zn1 > Mg2 > Si2 > Mg1 > Si1 > C (control). The highest values of available Cu²⁺ were observed in the control treatment, whereas the lowest values were obtained when Zn2 was added. The same tendencies were observed with substantial concentrations of Fe. The addition of NPs to the soil samples positively affected the plants' Cu²⁺ uptake. The effects of NPs and the additions of Cu²⁺ and Fe³⁺ on the availability of nitrogen, phosphorus, and potassium (NPK) in the soil system were very completed and osculated from one treatment to another. The same tendencies were observed with the total concentration of NPK in plants.

Enhanced water permeability and fouling resistance properties of ultrafiltration membranes incorporated with hydroxyapatite decorated orange-peel-derived activated carbon nanocomposites

Hydroxyapatite-decorated activated carbon (HAp/AC) nanocomposite was synthesized and utilized as a nanofiller to fabricate a novel type of polyethersulfone (PES) nanocomposite ultrafiltration (UF) membranes. Activated carbon (AC) derived from orange peel was synthesized by low-temperature pyrolysis at 400 °C. A hydroxyapatite/AC (HAp/AC) nanocomposite was developed by a simple one-pot hydrothermal synthesis method. The UF membrane was fabricated by intercalating HAp/AC fillers into PES casting solution by the non-solvent induced phase separation (NIPS) process. The prepared membranes exhibited a lower water contact angle than the pristine PES membrane. The hybrid membrane with 4 wt% HAp/AC nanocomposite displayed 4.6 times higher pure water flux (~660 L/m² h) than that of the pristine membrane (143 L/m² h). In static adsorption experiments, it was found that the amount of humic acid (HA) and bovine serum albumin (BSA) adsorbed by the HAp/AC-PES hybrid membrane was much lower than that of the original membrane due to the electrostatic repulsive forces between them and the surface of the membrane. Irreversible fouling was reduced from 33 to 6 % for HA and from 46 to 8 % for BSA after HAp/AC was incorporated into the PES matrix. After 7 cycles of water-BSA-water, the HAp/AC-PES hybrid membrane maintained a high pure water flux of 540 L/m² h with an excellent flux recovery ratio (FRR), demonstrating the long-term stability of the membranes. The developed UF membranes outperformed the original PES membranes in terms of permeability, selectivity, and antifouling.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Nanofiltration for drinking water treatment: a review

In recent decades, nanofiltration (NF) is considered as a promising separation technique to produce drinking water from different types of water source. In this paper, we comprehensively reviewed the progress of NF-based drinking water treatment, through summarizing the development of materials/fabrication and applications of NF membranes in various scenarios including surface water treatment, groundwater treatment, water reuse, brackish water treatment, and point of use applications. We not only summarized the removal of target major pollutants (e.g., hardness, pathogen, and natural organic matter), but also paid attention to the removal of micropollutants of major concern (e.g., disinfection byproducts, per- and polyfluoroalkyl substances, and arsenic). We highlighted that, for different applications, fit-for-purpose design is needed to improve the separation capability for target compounds of NF membranes in addition to their removal of salts. Outlook and perspectives on membrane fouling control, chlorine resistance, integrity, and selectivity are also discussed to provide potential insights for future development of high-efficiency NF membranes for stable and reliable drinking water treatment.

Recent technologies for nutrient removal and recovery from wastewaters: A review

Water scarcity and its pollution has become a concern in recent times. The disposal of nutrient-rich (nitrogen and phosphorous) wastewater is also one of the main cause of water pollution through eutrophication, reduced dissolved oxygen that poses threat to aquatic ecosystems. As a result, nutrient removal has become a mandate apart from the removal of organics. However, the removal of nutrients from sewage is a challenging task. Conversely, conventional biological treatment processes provide little relief in nutrient removal. The treated effluents from conventional biological processes do not achieve the stringent nutrient removal disposal standard limits and become primary cause of pollution in the receiving water bodies. This has stressed upon the need for eco-friendly, low-energy and cost-efficient nutrient removal treatment technologies. Various biological treatment combinations or variants are in use for the efficient removal of nutrients. The biological processes in itself or in combination with chemical processes are preferred over technologies based solely on physico-chemical processes for its treatment performance at lower cost. This review summarizes the existing treatment processes and their possible up-gradation with the aim to accomplish the marked effluent standards for the nutrients. The concept of conventional systems and advanced systems for nutrients (nitrogen and phosphorous) removal which are already developed or under development are deeply discussed. Further, the challenges of each treatment systems are abridged. Finally, the possible suggestions for the modification/retrofitting of existing treatment systems for achieving stringent disposal standards are pointed out.