Application of (V)UV/O3 technology for post-treatment of biologically treated wastewater: A pilot-scale study

Vacuum-ultraviolet based advanced oxidation and reduction processes for water treatment

The use of vacuum-ultraviolet (VUV) photolysis in water treatment has been gaining significant interest due to its efficacy in degrading refractory organic contaminants and eliminating oxyanions. In recent years, the reactive species driving pollutant decomposition in VUV-based advanced oxidation and reduction processes (VUV-AOPs and VUV-ARPs) have been identified. This review aims to provide a concise overview of VUV photolysis and its advancements in water treatment. We begin with an introduction to VUV irradiation, followed by a summary of the primary reactive species in both VUV-AOPs and VUV-ARPs. We then explore the factors influencing VUV-photolysis in water treatment, including VUV irradiation dose, catalysts or activators, dissolved gases, water matrix components (e.g., DOM and inorganic anions), and solution pH. In VUV-AOPs, the predominant reactive species are hydroxyl radicals (˙OH), hydrogen peroxide (H2O2), and ozone (O3). Conversely, in VUV-ARPs, the main reactive species are the hydrated electron (eaq-) and hydrogen atom (˙H). It is worth noting that VUV-based advanced oxidation/reduction processes (VUV-AORPs) can transit between VUV-AOPs and VUV-ARPs based on the externally added chemicals and dissolved gases in the solution. Increase of the VUV irradiation dose and the concentration of catalysts/activators enhances the degradation of contaminants, whereas DOM and inorganic anions inhibit the reaction. The pH influences the redox potential of ˙OH, the speciation of contaminants and activators, and thus the overall performance of the VUV-AOPs. Conversely, an alkaline pH is favored in VUV-ARPs because eaq- predominates at higher pH.

Environmental health hazards of untreated livestock wastewater: potential risks and future perspectives

Due to technological and economic limitations, waste products such as sewage and manure generated in livestock farming lack comprehensive scientific and centralized treatment. This leads to the exposure of various contaminants in livestock wastewater, posing potential risks to both the ecological environment and human health. This review evaluates the environmental and physical health risks posed by common pollutants in livestock wastewater and outlines future treatment methods to mitigate these risks. Residual wastes in livestock wastewater, including pathogenic bacteria and parasites surviving after epidemics or diseases on various farms, along with antibiotics, organic wastes, and heavy metals from farming activities, contribute to environmental damage and pose risks to human health. As the livestock industry's development increasingly impacts society's future negatively, addressing the issue of residual wastes in livestock wastewater discharge becomes imperative. Ongoing advancements in wastewater treatment systems are consistently updating and refining practices to effectively minimize waste exposure at the discharge source, mitigating risks to environmental ecology and human health. This review not only summarizes the "potential risks of livestock wastewater" but also explores "the prospects for the development of wastewater treatment technologies" based on current reports. It offers valuable insights to support the long-term and healthy development of the livestock industry and contribute to the sustainable development of the ecological environment.

Remediation of Surfactants Used by VUV/O3 Techniques: Degradation Efficiency, Pathway and Toxicological Analysis

Surfactants are increasingly used in systems that come into contact with the human body, such as food, pharmaceuticals, cosmetics and personal hygiene products. Increasing attention is being devoted to the toxic effects of surfactants in various human contact formulations, as well as the removal of residual surfactants. In the presence of ozone (O₃), anion surfactants-a characteristic micro-pollutant-such as sodium dodecylbenzene sulfonate (SDBS) in greywater, can be removed using radical advanced oxidation. Herein, we report a systematic study of the SDBS degradation effect of O₃ activated by vacuum ultraviolet (VUV) irradiation and the influence of water composition on VUV/O₃, and determined the contribution of radical species. We show a synergistic effect of VUV and O₃, while VUV/O₃ reached a higher mineralization (50.37%) than that of VUV (10.63%) and O₃ (29.60%) alone. The main reactive radicals of VUV/O₃ were HO•. VUV/O₃ had an optimal pH of 9. The addition of SO₄^2- had almost no effect on the degradation of SDBS by VUV/O₃, Cl^- and HCO₃^- slightly reduced the reaction rate, and NO₃^- had a significant inhibition on the degradation. In total, SDBS had three isomers, with which the three degradation pathways were very comparable. Compared with SDBS, the toxicity and harmfulness of the degradation by-products of the VUV/O₃ process decreased. Additionally, VUV/O₃ could degrade synthetic anion surfactants from laundry greywater effectively. Overall, the results show the potential of VUV/O₃ in safeguarding humans from residual surfactant hazards.

Drinking water treatment and associated toxic byproducts: Concurrence and urgence

Reclaimed water is highly required for environmental sustainability and to meet sustainable development goals (SDGs). Chemical processes are frequently associated with highly hazardous and toxic by-products, like nitrosamines, trihalomethanes, haloaldehydes, haloketones, and haloacetic acids. In this context, we aim to summarize the formation of various commonly produced disinfection by-products (DBPs) during wastewater treatment and their treatment approaches. Owing to DBPs formation, we discussed permissible limits, concentrations in various water systems reported globally, and their consequences on humans. While most reviews focus on DBPs detection methods, this review discusses factors affecting DBPs formation and critically reviews various remediation approaches, such as adsorption, reverse osmosis, nano/micro-filtration, UV treatment, ozonation, and advanced oxidation process. However, research in the detection of hazardous DBPs and their removal is quite at an early and initial stage, and therefore, numerous advancements are required prior to scale-up at commercial level. DBPs abatement in wastewater treatment approach should be considered. This review provides the baseline for optimizing DBPs formation and advancements in the remediation process, efficiently reducing their production and providing safe, clean drinking water. Future studies should focus on a more efficient and rigorous understanding of DBPs properties and degradation of hazardous pollutants using low-cost techniques in wastewater treatment.

Insight into advanced oxidation processes for the degradation of fluoroquinolone antibiotics: Removal, mechanism, and influencing factors

The enrichment and transport of antibiotics in the environments pose many potential hazards to aquatic animals and humans, which has become one of the public health challenges worldwide. As a widely used class of antibiotics, fluoroquinolones (FQs) generally accumulated in the environments as traditional sewage treatment plants cannot completely remove them. Advanced oxidation processes (AOPs) have been shown to be a promising method for the abatement of antibiotic contamination. In this review, influencing factors and relevant mechanisms of FQs removal by various AOPs were summarized. Compared with other AOPs, photocatalytic ozone may be considered as a cost-effective method for degrading FQs. Finally, the benefits and application restrictions of AOPs were discussed, along with proposed research directions to provide new insights into the control of FQs pollutant via AOPs in practical applications.

A novel approach to interpret quasi-collimated beam results to support design and scale-up of vacuum UV based AOPs

UV-C at 254 nm and vacuum UV (VUV) at 185 nm are the two major emission lines of a low-pressure mercury lamp. Upon absorption of VUV photons, water molecules and selected inorganic anions generate hydroxyl (HO^.) and other redox radicals, both capable of degrading organic micropollutants (OMPs), thereby offering the opportunity to reduce H₂O₂ and energy consumption in UV-based advanced oxidation process (AOP). To be successfully scaled-up, the dual-wavelength VUV+UV/H₂O₂ AOP requires laboratory-scale experiments to establish design criteria. The figures of merit typically used for reporting and interpreting quasi-collimated beam results for UV-based AOPs (time, dose, absorbed energy and E_EO) are insufficient and inaccurate when employed for dual-wavelength AOP such as the VUV+UV/H₂O₂ AOP, and do not support system scale-up. In this study, we introduce a novel figure of merit, useful absorbed energy (uAE), defined as fraction of absorbed energy that results in the generation of oxidative radicals. Here, results of quasi-collimated beam VUV+UV/H₂O₂ AOP experiments on four different water matrices are used to introduce 2D plots that employ both uAE_UV and uAE_VUV as a novel method to represent laboratory-scale experiments of VUV+UV/H₂O₂ AOP and demonstrate how the 2D plots sufficiently support scale-up of the AOP.

Assessment Impacts of Ozone on Salmonella Typhimurium and Escherichia coli O157:H7 in Liquid Dairy Waste

Liquid dairy manure, which is produced in enormous quantities in flush dairy manure management systems, is commonly used as an alternative to chemical fertilizers. It provides nutrient benefits to crops and soils. While dairy waste is a well-accepted and widely used fertilizer, the presence of indicator organisms and human pathogens in manure may lead to pathogen contamination in crops and soils. This study is focused on the examination of ozone gas-based sterilization. In the past, ozone (O3) has been used for sanitizing various foods and solid surfaces, but the potential of O3 for eliminating human pathogens in liquid dairy waste is not studied yet. Pathogens such as Salmonella Typhimurium and Escherichia coli O157:H7 are reported to be present in liquid dairy manure, and this research evaluated the effects of various levels of ozone on the survival of these two pathogens. We designed a continuous type O3 treatment system that has four major components: (1) ozone generator using oxygen; (2) ozone concentration control by mixing with pure air; (3) continuous monitoring of ozone concentrations; and (4) ozone experiment chambers. Various levels of ozone (43.26, 87.40, and 132.46 mg·L−1) were produced in the ozone system, and subsequently, ozone was diffused through liquid manure. Liquid manure was exposed to ozone for multiple durations (30, 60, and 120 min). To determine the effectiveness of O3 in eliminating pathogens, time-series samples were collected and analyzed for determining the levels of S. typhimurium and E. coli O157:H7. Preliminary results showed that ozone concentrations of 132.46 mg/L, and exposure time of 120 min resulted in the reduced levels of E. coli and Salmonella. Low levels of ozone and limited exposure time were found to be less effective in pathogen removal potentially due to high solid contents. Additional studies carrying out experiments to evaluate the impacts of solids in combination with ozone concentrations will provide further insights into developing full-scale ozone-based treatment systems.

UV and (V)UV irradiation of sitagliptin in ultrapure water and WWTP effluent: Kinetics, transformation products and degradation pathway

Sitagliptin (SITA) is an antidiabetic drug consumed worldwide in high quantities. Because of the low removal rate of this compound in conventional wastewater treatment plants (WWTPs), it enters receiving surface waters with the discharged WWTP effluents. SITA can be detected up to μg/L concentration in rivers. In this study, UV (254 nm) and (V)UV (185 nm + 254 nm) irradiation was applied in laboratory scale to degrade SITA. The effect of three parameters was evaluated on the degradation rate, namely i) the efficiency in UV and (V)UV irradiation, ii) the presence or absence of dissolved oxygen, iii) the matrix effect of WWTP effluent. Degradation rate of SITA was largely increased by (V)UV irradiation, and decreased in WWTP effluent as expected. The presence of dissolved oxygen increased the degradation rate only in UV experiments and did not have a considerable effect in (V)UV experiments. In total, 14 transformation products (TPs) were identified (twelve new); their structures were proposed based on high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy analyses. The most characteristic reaction steps of the degradation of SITA involved nucleophilic aromatic photosubstitution whereas hydroxide ions acted as attacking nucleophiles and replaced F atoms of the phenyl moiety by hydroxide groups, in agreement with the increase in photolysis rate with increasing pH. The photochemical degradation pathway of SITA was also interpreted. Kinetic profiles revealed TP 421, TP 208 and TP 192 to be the most recalcitrant TPs.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Multilayered solid phase extraction and ultra performance liquid chromatographic method for suspect screening of halogenated pharmaceuticals and photo-transformation products in freshwater - comparison between data-dependent and data-independent acquisition mass spectrometry

Since conventional biological wastewater treatments are not admittedly effective to convert pharmaceutical active compounds (PhACs) into nontoxic products, natural abiotic mechanisms such as solar photolysis arises as an important degradation process, especially for halogenated molecules. In the present work, photolysis simulation was carried out in-lab for precursors and their respective photo-transformation products (photo-TPs), which were analyzed through reversed-phase ultra-high performance liquid chromatography coupled to high resolution mass spectrometry (RP-UHPLCHRMS). An in-house library was created in order to provide reference information for target (precursors) and suspect screening (photo-TPs) analysis of freshwater samples from impacted aquatic environments. Strategies in the use of data-dependent acquisition (DDA) and data-independent acquisition (DIA), as well as the data processing software are discussed here for the identification of 6 PhACs and photo-TPs. Because no standards of photo-TPs were available, only the target compounds, i.e. sitagliptin (398 ± 2 ng L^-1), iohexol (209 ± 5 ng L^-1), lamotrigine (103 ± 10 ng L^-1), losartan (43 ± 10 ng L^-1), ofloxacin (28 ± 7 ng L^-1), and sertraline (25 ± 7 ng L^-1) could be quantified through multiple standard additions.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.