A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway

Discovery and biochemical characterization of thermostable glycerol oxidases

Alditol oxidases are promising tools for the biocatalytic oxidation of glycerol to more valuable chemicals. By integrating in silico bioprospecting with cell-free protein synthesis and activity screening, an effective pipeline was developed to rapidly identify enzymes that are active on glycerol. Three thermostable alditol oxidases from Actinobacteria Bacterium, Streptomyces thermoviolaceus, and Thermostaphylospora chromogena active on glycerol were discovered. The characterization of these three flavoenzymes demonstrated their glycerol oxidation activities, preference for alkaline conditions, and excellent thermostabilities with melting temperatures higher than 75 °C. Structural elucidation of the alditol oxidase from Actinobacteria Bacterium highlighted a constellation of side chains that engage the substrate through several hydrogen bonds, a histidine residue covalently bound to the FAD prosthetic group, and a tunnel leading to the active site. Upon computational simulations of substrate binding, a double mutant targeting a residue pair at the tunnel entrance was created and found to display an improved thermal stability and catalytic efficiency for glycerol oxidation. The hereby described alditol oxidases form a valuable panel of oxidative biocatalysts that can perform regioselective oxidation of glycerol and other polyols. KEY POINTS: • Rapid pipeline designed to identify putative oxidases • Biochemical and structural characterization of alditol oxidases • Glycerol oxidation to more valuable derivatives.

Photocatalytic and electrocatalytic degradation of bisphenol A in the presence of graphene/graphene oxide-based nanocatalysts: A review

Bisphenol A (BPA), a widely recognized endocrine disrupting compound, has been discovered in drinking water sources/finished water and domestic wastewater influent/effluent. Numerous studies have shown photocatalytic and electrocatalytic oxidation to be very effective for the removal of BPA, particularly in the addition of graphene/graphene oxide (GO)-based nanocatalysts. Nevertheless, the photocatalytic and electrocatalytic degradation of BPA in aqueous solutions has not been reviewed. Therefore, this review gives a comprehensive understanding of BPA degradation during photo-/electro-catalytic activity in the presence of graphene/GO-based nanocatalysts. Herein, this review evaluated the main photo-/electro-catalytic degradation mechanisms and pathways for BPA removal under various water quality/chemistry conditions (pH, background ions, natural organic matter, promotors, and scavengers), the physicochemical characteristics of various graphene/GO-based nanocatalysts, and various operating conditions (voltage and current). Additionally, the reusability/stability of graphene/GO-based nanocatalysts, hybrid systems combined with ozone/ultrasonic/Fenton oxidation, and prospective research areas are briefly described.

Anodic Reactions in Alkaline Hybrid Water Electrolyzers: Activity versus Selectivity

Affordable and abundant sources of green hydrogen can give a large impetus to the Energy Transition. While conventional water electrolysis has positioned itself as a prospective candidate for this purpose, it lacks cost competitiveness. Hybrid water electrolysis (HWE) has been praised for its ability to address the issues of conventional water electrolysis due to its decreased energy requirements and its ability to generate value-added products, among other advantages. In this perspective, we discuss the challenges related to the applicability of HWE, using the glycerol oxidation reaction as an example, and we identify pitfalls often found in the literature. Reported catalysts, especially those based on abundant materials, suffer from a severe selectivity-activity tradeoff, hampering their industrial applicability due to large costs associated with product separation and purification. Additionally, testing electrocatalysts under conditions that are relevant for their applications is encouraged, yet these conditions are largely unknown, as in-depth knowledge of the catalytic mechanisms is largely missing. Lastly, an opportunity to increase the amount of interdisciplinary research concerning both the engineering requirements and financial performance of HWE is discussed. Increased focus on these objectives may boost the development of HWE on an industrial scale.

Electrokinetic Analyses Uncover the Rate-Determining Step of Biomass-Derived Monosaccharide Electroreduction on Copper

Electrochemical biomass conversion holds promise to upcycle carbon sources and produce valuable products while reducing greenhouse gas emissions. To this end, deep insight into the interfacial mechanism is essential for the rational design of an efficient electrocatalytic route, which is still an area of active research and development. Herein, we report the reduction of dihydroxyacetone (DHA)-the simplest monosaccharide derived from glycerol feedstock-to acetol, the vital chemical intermediate in industries, with faradaic efficiency of 85±5 % on a polycrystalline Cu electrode. DHA reduction follows preceding dehydration by coordination with the carbonyl and hydroxyl groups and the subsequent hydrogenation. The electrokinetic profile indicates that the rate-determining step (RDS) includes a proton-coupled electron transfer (PCET) to the dehydrated intermediate, revealed by coverage-dependent Tafel slope and isotopic labeling experiments. An approximate zero-order dependence of H+ suggests that water acts as the proton donor for the interfacial PCET process. Leveraging these insights, we formulate microkinetic models to illustrate its origin that Eley-Rideal (E-R) dominates over Langmuir-Hinshelwood (L-H) in governing Cu-mediated DHA reduction, offering rational guidance that increasing the concentration of the adsorbed reactant alone would be sufficient to promote the activity in designing practical catalysts.

Electrochemical Valorization of Glycerol via Electrocatalytic Reduction into Biofuels: A Review

Electrochemical conversion of underutilized biomass-based glycerol into high-value-added products provides a green approach for biomass and waste valorization. Plus, this approach offers an alternative to biofuel manufacturing procedure, under mild operating conditions, compared to the traditional thermochemical routes. Nevertheless, glycerol has been widely valorized via electrooxidation, with lower-value products generated at the cathode, ignoring the electroreduction. Here, a review of the efficient glycerol reduction into various products via the electrocatalytic reduction (ECR) process was presented. This review has been built upon the background of glycerol underutilization and theoretical knowledge about the state-of-the-art ECR. The experimental understanding of the processing parameter influences towards electrochemical efficiency, catalytic activity, and product selectivity are comprehensively reviewed, based on the recent glycerol ECR studies. We conclude by outlining present issues and highlighting potential future research avenues for enhanced ECR application.

In-situ Bi-modified Pt towards glycerol and formic acid electro-oxidation: Effects of catalyst structure and surface microenvironment on activity and selectivity

The performances of glycerol electro-oxidation reaction (GOR) and formic acid electro-oxidation reaction (FAOR) catalyzed by Pt catalyst were dramatically improved by adding Bi3+ into the reaction solution. The dynamic structure and microenvironment of in-situ Bi-modified Pt and their impact on the catalytic performances were revealed. A strong correlation was established between the Bi coverage of Pt-based catalysts and their resistance to CO poisoning and performance in GOR and FAOR. When Bi3+ increased to a certain amount, a Bi-shell containing hydroxides was formed on Pt surfaces except the formation of Pt-Bi ensemble. On Pt catalyst covered with 43.9 % Bi, the peak mass-specific activities of GOR and FAOR in forward scans were 4.2 and 34.7 times that of Pt/NCNTs, respectively. The peak electrochemical active surface area (ECSA)-specific activity of FAOR in forward scan for Pt with 52.6 % Bi coverage was 80.6 times that of Pt/NCNTs. The dehydrogenation process in FAOR and the 4-electron pathway in GOR were improved for Bi-modified Pt. The experimental results and DFT calculations indicated that the positively charged Bi and structure of Pt-Bi ensemble improved the adsorption and interaction of negatively charged intermediates, and the enhanced hydroxides facilitated the oxidation and removal of toxic intermediates, such as CO.

Fabric dyeing wastewater treatment and salt recovery using a pilot scale system consisted of graphite electrodes based on electrooxidation and nanofiltration

In this study, color removal, suspended solids removal, and salt recovery were investigated from different fabric dyeing wastewaters using a pilot scale treatment system. A pilot scale system was installed in the wastewater outlet area of five different textile companies. Experiments were planned for pollutant removal and salt recovery from wastewater. First, the wastewater was treated by electrooxidation (EO) using graphite electrodes. After a reaction time of 1 h, the wastewater was passed throughout the granular activated carbon (AC) coloumn. The pre-treated wastewater was passed through the membrane (NF) system to recover the salt in the wastewater. Finally, the recovered salt water was used for fabric dyeing. In the pilot scale treatment system (EO + AC + NF), 100% of suspended solids (SS) and an average of 99.37% of color were removed from fabric dyeing wastewaters. At the same time, a high amount of salt water was recovered and reused. Optimum conditions were determined as 4 V current, 1000 A power, wastewater's own pH values and 60 min of reaction time. The energy and operating cost for treatment of 1 m3 of wastewater were determined as 40.0 kWh/m3 and 2.2 US$/m3, respectively. In addition to the prevention of environmental pollution by the treatment of wastewater using the pilot-scale treatment system, the reuse of the recovered water will contribute to the protection of our valuable water resources. In addition, using the NF membrane process after the EO system, it will be possible to recover salt from wastewater with high salt content such as textile wastewater.

Coupling Glycerol Conversion with Hydrogen Production Using Alloyed Electrocatalysts

Herein, uniform precious alloys including PtAg, PdAg, and PtPdAg nanoparticles were synthesized as electrocatalysts for glycerol oxidation reaction (GOR). The structures of the samples were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectrometry. The catalytic performance of the samples was evaluated in both alkaline and acidic electrolytes. Among the samples, PtPdAg exhibited superior activity with the largest current density of 3.77 mA cm-2 in alkaline solutions, which is 4.1 and 7.7 times those of Pd/C and Pt/C, respectively. In acidic solutions, the PtPdAg catalyst shows the highest current density of 0.58 mA cm-2, which is 1.8 times that of the Pt/C catalyst. The products of GOR were analyzed by high-performance liquid chromatography. Eight products including oxalic acid, tartronic acid, glyoxylic acid, glyceric acid, glyceraldehyde (GLAD), glycolic acid, lactic acid, and dihydroxyacetone were detected. Notably, in acidic solutions, PtAg and PtPdAg yielded the largest GLAD selectivity of 92.2% at 0.6 and 0.8 V, respectively. Using the alloyed catalysts, electrolysis processes coupling the GOR with the hydrogen evolution reaction were conducted. The conversion of glycerol and production of hydrogen were determined. To highlight the energy efficiency, a solar-panel-powered electrolysis process was conducted for the simultaneous production of hydrogen and high-valued products.

Radiolysis-Assisted Direct Growth of Gold-Based Electrocatalysts for Glycerol Oxidation

The electrocatalytic oxidation of glycerol by metal electrocatalysts is an effective method of low-energy-input hydrogen production in membrane reactors in alkaline conditions. The aim of the present study is to examine the proof of concept for the gamma-radiolysis-assisted direct growth of monometallic gold and bimetallic gold-silver nanostructured particles. We revised the gamma radiolysis procedure to generate free-standing Au and Au-Ag nano- and micro-structured particles onto a gas diffusion electrode by the immersion of the substrate in the reaction mixture. The metal particles were synthesized by radiolysis on a flat carbon paper in the presence of capping agents. We have integrated different methods (SEM, EDX, XPS, XRD, ICP-OES, CV, and EIS) to examine in detail the as-synthesized materials and interrogate their electrocatalytic efficiency for glycerol oxidation under baseline conditions to establish a structure-performance relationship. The developed strategy can be easily extended to the synthesis by radiolysis of other types of ready-to-use metal electrocatalysts as advanced electrode materials for heterogeneous catalysis.

Photoassisted Strategy to Promote Glycerol Electrooxidation to Lactic Acid Coupled with Hydrogen Production

Electrocatalytic oxidation of glycerol (GLY; from a biodiesel byproduct) to lactic acid (LA; the key monomers for polylactic acid; PLA) is considered a sustainable approach for biomass waste upcycling and is coupled with cathodic hydrogen (H₂) production. However, current research still suffer from issues of low current density and low LA selectivity. Herein, we reported a photoassisted electrocatalytic strategy to achieve the selective oxidation of GLY to LA over a gold nanowire (Au NW) catalyst, attaining a high current density of 387 mA cm^-2 at 0.95 V vs RHE, together with a high LA selectivity of 80%, outperforming most of the reported works in the literature. We reveal that the light-assistance strategy plays a dual role, which can both accelerate the reaction rate through the photothermal effect and also promote the adsorption of the middle hydroxyl of GLY over Au NWs to realize the selective oxidation of GLY to LA. As a proof-of-concept, we realized the direct conversion of crude GLY that was extracted from cooking oil to attain LA and coupled it with H₂ production using the developed photoassisted electrooxidation process, revealing the potential of this strategy in practical applications.

Electrocatalytic Upcycling of Biomass and Plastic Wastes to Biodegradable Polymer Monomers and Hydrogen Fuel at High Current Densities

Transformation of biomass and plastic wastes to value-added chemicals and fuels is considered an upcycling process that is beneficial to resource utilization. Electrocatalysis offers a sustainable approach; however, it remains a huge challenge to increase the current density and deliver market-demanded chemicals with high selectivity. Herein, we demonstrate an electrocatalytic strategy for upcycling glycerol (from biodiesel byproduct) to lactic acid and ethylene glycol (from polyethylene terephthalate waste) to glycolic acid, with both products being as valuable monomers for biodegradable polymer production. By using a nickel hydroxide-supported gold electrocatalyst (Au/Ni(OH)₂), we achieve high selectivities of lactic acid and glycolic acid (77 and 91%, respectively) with high current densities at moderate potentials (317.7 mA/cm² at 0.95 V vs RHE and 326.2 mA/cm² at 1.15 V vs RHE, respectively). We reveal that glycerol and ethylene glycol can be enriched at the Au/Ni(OH)₂ interface through their adjacent hydroxyl groups, substantially increasing local concentrations and thus high current densities. As a proof of concept, we employed a membrane-free flow electrolyzer for upcycling triglyceride and PET bottles, attaining 11.2 g of lactic acid coupled with 9.3 L of H₂ and 13.7 g of glycolic acid coupled with 9.4 L of H₂, respectively, revealing the potential of coproduction of valuable chemicals and H₂ fuel from wastes in a sustainable fashion.

Dihydroxyacetone: A User Guide for a Challenging Bio-Based Synthon

1,3-dihydroxyacetone (DHA) is an underrated bio-based synthon, with a broad range of reactivities. It is produced for the revalorization of glycerol, a major side-product of the growing biodiesel industry. The overwhelming majority of DHA produced worldwide is intended for application as a self-tanning agent in cosmetic formulations. This review provides an overview of the discovery, physical and chemical properties of DHA, and of its industrial production routes from glycerol. Microbial fermentation is the only industrial-scaled route but advances in electrooxidation and aerobic oxidation are also reported. This review focuses on the plurality of reactivities of DHA to help chemists interested in bio-based building blocks see the potential of DHA for this application. The handling of DHA is delicate as it can undergo dimerization as well as isomerization reactions in aqueous solutions at room temperature. DHA can also be involved in further side-reactions, yielding original side-products, as well as compounds of interest. If this peculiar reactivity was harnessed, DHA could help address current sustainability challenges encountered in the synthesis of speciality polymers, ranging from biocompatible polymers to innovative polymers with cutting-edge properties and improved biodegradability.

Chemicals Production from Glycerol through Heterogeneous Catalysis: A Review

Utilization of biofuels generated from renewable sources has attracted broad attention due to their benefits such as reducing consumption of fossil fuels, sustainability, and consequently prevention of global warming. The production of biodiesel causes a huge amount of by-product, crude glycerol, to accumulate. Glycerol, because of its unique structure having three hydroxyl groups, can be converted to a variety of industrially valuable products. In recent decades, increasing studies have been carried out on different catalytic pathways to selectively produce a wide range of glycerol derivatives. In the current review, the main routes including carboxylation, oxidation, etherification, hydrogenolysis, esterification, and dehydration to convert glycerol to value-added products are investigated. In order to achieve more glycerol conversion and higher desired product selectivity, acquisition of knowledge on the catalysts, the type of acidic or basic, the supports, and studying various reaction pathways and operating parameters are necessary. This review attempts to summarize the knowledge of catalytic reactions and mechanisms leading to value-added derivatives of glycerol. Additionally, the application of main products from glycerol are discussed. In addition, an overview on the market of glycerol, its properties, applications, and prospects is presented.

Synthesis and Characterization of Supported Pd Catalysts for Potential Application in Glycerol Electro-Oxidation

Ceria-supported Pd catalysts encompassing oxides of Cu, Co, and Fe were synthesized and characterized using XRD, TEM, SEM-EDX, TPR, BET, and Raman. After the incorporation of the metal oxides, the surface area and pore volume of the ceria support decreased. XRD showed the presence of the metal oxide phases as well as the support, CeO2. TPR showed that the bimetallic catalyst had improved reducibility compared to the monometallic Pd/CeO2. TEM images showed irregular-shaped particles with an average size distribution of 2–10 nm. SEM-EDX showed that the metal oxides were evenly distributed over the surface of the support. The electro-oxidation of glycerol in an alkaline environment was evaluated using cyclic voltammetry, and the products formed were identified and quantified using GC-MS. Glyceric acid was the dominant product over Pd-CuO/CeO2, while glyceraldehyde and dihydroxyacetone were dominant over Pd-Co3O4/CeO2 and Pd-Fe2O3/CeO2, respectively.

Effects of electroflocculation/oxidation pretreatment on the fouling characteristics of ultrafiltration membranes

In order to reduce the membrane pollution of ultrafiltration caused by natural organic matter and improve the treatment efficiency, electroflocculation/oxidation is used as the premembrane treatment method. The membrane specific flux attenuation characteristics was compared and analyzed under the conditions of direct ultrafiltration and electroflocculation/oxidation-ultrafiltration. Combined with the analysis of the reversibility of membrane fouling, the mechanism of electroflocculation/oxidation pretreatment to alleviate ultrafiltration membrane fouling was evaluated, and the membrane pore clogging model was used to fit the fouling law. The results show that, in the continuously fed filtration experiment, the electroflocculation/oxidation process involved in the pretreatment and the direct ultrafiltration membrane filtration decreased the ultrafiltration membrane flux to 79.1% and 28.5%, respectively. The reversible resistance generated by ultrafiltration and electroflocculation/oxidation-ultrafiltration processes accounted for 37.70% and 62.26% of their total pollution resistance, whereas the irreversible resistance generated accounted for 47.30% and 12.40%, respectively. Meanwhile, the direct correlation between the the flux dropped and complete clogging became less than that of the ultrafiltration process. The pretreatment significantly strengthened irreversible fouling resistance of the membrane pores. The membrane permeation flux was significantly increased after the electroflocculation/oxidation pretreatment.

Catalytic Conversion of Glycerol into Hydrogen and Value-Added Chemicals: Recent Research Advances

In recent decades, the use of biomass as alternative resources to produce renewable and sustainable biofuels such as biodiesel has gained attention given the situation of the progressive exhaustion of easily accessible fossil fuels, increasing environmental concerns, and a dramatically growing global population. The conventional transesterification of edible, nonedible, or waste cooking oils to produce biodiesel is always accompanied by the formation of glycerol as the by-product. Undeniably, it is essential to economically use this by-product to produce a range of valuable fuels and chemicals to ensure the sustainability of the transesterification process. Therefore, recently, glycerol has been used as a feedstock for the production of value-added H2 and chemicals. In this review, the recent advances in the catalytic conversion of glycerol to H2 and high-value chemicals are thoroughly discussed. Specifically, the activity, stability, and recyclability of the catalysts used in the steam reforming of glycerol for H2 production are covered. In addition, the behavior and performance of heterogeneous catalysts in terms of the roles of active metal and support toward the formation of acrolein, lactic acid, 1,3-propanediol, and 1,2-propanediol from glycerol are reviewed. Recommendations for future research and main conclusions are provided. Overall, this review offers guidance and directions for the sufficient and economical utilization of glycerol to generate fuels and high value chemicals, which will ultimately benefit industry, environment, and economy.