Biological modification in air-cathode microbial fuel cell: Effect on oxygen diffusion, current generation and wastewater degradation

Pseudomonas aeruginosa promoted microbial fuel cells for cytidine acid production wastewater treatment

Microbial fuel cell (MFC) can convert the chemical energy of organic matter in wastewater into electrical energy with high degradation efficiency. In this study, a type of specialized microorganism, Pseudomonas aeruginosa, was screened and added to an MFC to promote the degradation of wastewater generated during the production of cytidine acid while improving the performance of the MFC. The MFC achieved a maximum voltage of 57.7 ± 4.4 mV and a maximum power density of 1.9 ± 0.1 mW/m2; moreover, the degradation efficiencies of chemical oxygen demand (COD), total phosphorus (TP), and phosphate reached 76.3 ± 2.8%, 80.3 ± 3.3%, and 85.3 ± 3.5%, respectively. Gas chromatography-mass spectrometry (GC-MS) and metabolomics analysis revealed that Pseudomonas aeruginosa could effectively degrade organic matter in wastewater. Additionally, the metabolic pathways involved may have been pyrimidine metabolism, arginine and proline metabolism, and taurine and hypotaurine metabolism.

Microbial nutrient recovery cell as an efficient and sustainable nutrient recovery option in sewage treatment

Globally, nutrient pollution is a serious and challenging concern. Wastewater treatment plants (WWTPs) are designed to prevent the discharge of contaminants resulting from anthropogenic sources to the receiving water bodies. In this study, seasonal nutrient pollution load, and biological nutrient removal efficiency of an anoxic aerobic unit based WWTP were investigated. Seasonal assessment revealed that the average total nitrogen removal efficiency and total phosphorus removal efficiency of the WWTP do not meet the discharge standard of 10 mg/L and 1 mg/L, respectively. Furthermore, the WWTP does not utilize the energy contained in the wastewater. In this regard, dual chamber MFC (D-MFC) has emerged as a promising solution that can not only treat wastewater but can also convert chemical energy present in the wastewater into electrical energy. However, higher N O3- (57 ± 4 mg/L) and P-P O43- (6 ± 0.52 mg/L) concentration in cathodic effluent is a major drawback in D-MFC. Therefore, to solve this issue, D-MFC was transformed into a microbial nutrient recovery cell (MNRC) which demonstrated a final N H4+-N and P-P O43- concentration of nearly 1 mg/L with N H4+-N and P-P O43- recovery up to 74 % and 69 %, respectively in the recovery chamber. Besides, MNRC attained a maximum power density of 307 mW/m3 and a current density of 1614 mA/m3, thus indicating MNRC is an eco-friendly, energy-neutral, and promising technology for electricity generation and recovering nutrients.

Optimal aeration area of cathode electrode in the batch type of microbial fuel cells with non-woven interface

Microbial fuel cells (MFCs) are based on the biochemical reaction of microorganisms to decompose organic wastewater for converting chemical energy into power energy. MFCs are considered an environmentally friendly technology that is gaining popularity due to their simultaneous digestion and energy production abilities. To enhance its real application in wastewater treatment, this study proposes to use a non-woven material for replacing the usage of expensive membranes in MFCs. In addition, the study aims to consider a series of different aeration areas of cathode electrodes for finding an optional design. Results have shown that the adoption of non-woven with 0.45 μm can effectively prohibit the diffusion of oxygen into the anode chamber. Moreover, the non-woven material played an important role as an interface between the anode and cathode, enhancing the MFC performance. The usage of suitable non-woven material can replace the role of the membrane when applied in real wastewater applications. The results have shown that the case study where a combination of a 50% aeration area of the cathode electrodes with 25% exposure of the cathode plate in the air yielded relatively better aeration in terms of a higher current density of 250 mA/m², higher power density of 220 mW/m², and higher open voltage circuit of 0.4 V, compared to other case studies considered. These results indicate the optimal aeration configuration for MFCs applied in commercial wastewater treatment in the future.

Over-expressing NadA quinolinate synthase in Escherichia coli enhances the bioelectrochemistry in microbial fuel cells

The microbial fuel cell (MFC), which converts biomass energy into electricity through microbial metabolism, is one of the important devices for generating new bioenergy. However, low power production efficiency limits the development of MFCs. One possible method to solve this problem is to genetically modify the microbial metabolism pathways to enhance the efficiency of MFCs. In this study, we over-expressed the nicotinamide adenine dinucleotide A quinolinate synthase gene (nadA) in order to increase the NADH/+ level in Escherichia coli and obtain a new electrochemically active bacteria strain. The following experiments showed an enhanced performance of the MFC, including increased peak voltage output (70.81 mV) and power density (0.29 μW/cm2), which increased by 361% and 20.83% compared to the control group, respectively. These data suggest that genetic modification of electricity producing microbes could be a potential way to improve MFC performance.