A disposable modified screen-printed electrode using egg white/ZnO rice structured composite as practical tool electrochemical sensor for formaldehyde detection and its comparative electrochemical study with Chitosan/ZnO nanocomposite

Recent Advances in Electrochemical Sensors for Formaldehyde

Formaldehyde, a ubiquitous indoor air pollutant, plays a significant role in various biological processes, posing both environmental and health challenges. This comprehensive review delves into the latest advancements in electrochemical methods for detecting formaldehyde, a compound of growing concern due to its widespread use and potential health hazards. This review underscores the inherent advantages of electrochemical techniques, such as high sensitivity, selectivity, and capability for real-time analysis, making them highly effective for formaldehyde monitoring. We explore the fundamental principles, mechanisms, and diverse methodologies employed in electrochemical formaldehyde detection, highlighting the role of innovative sensing materials and electrodes. Special attention is given to recent developments in nanotechnology and sensor design, which significantly enhance the sensitivity and selectivity of these detection systems. Moreover, this review identifies current challenges and discusses future research directions. Our aim is to encourage ongoing research and innovation in this field, ultimately leading to the development of advanced, practical solutions for formaldehyde detection in various environmental and biological contexts.

Promotion of formaldehyde degradation by electro-Fenton: Controlling the distribution of ·OH and formaldehyde near cathode to increase the reaction probability

The mismatch of pollutant concentration and ·OH concentration is the key reason for the inefficient degradation of formaldehyde in the electro-Fenton system. Therefore, formaldehyde and ·OH are adsorbed near the cathode, and the high concentration reaction region is constructed to increase the reaction probability, which is called control of the reaction region. Through nitrogen doping modification of the activated carbon cathode, the adsorption capacity of the modified cathode for formaldehyde and active species, and the selectivity of the two-electron oxygen reduction reaction were deeply analyzed. The results show that the suitable nitrogen doping form of the modified cathode significantly promotes the adsorption capacity of formaldehyde and H₂O₂, which is beneficial to realizing the promotion of formaldehyde degradation by nitrogen doped cathodes in the electro-Fenton system through control of the reaction region. Graphite nitrogen and pyrrolic nitrogen improve formaldehyde adsorption by enhancing the van der Waals force (8.897 mg g^-1), and pyridinic nitrogen improve H₂O₂ adsorption (1.841 mg g^-1) by enhancing the effect of hydrogen bonding interaction. Nitrogen doping enhances Fe²⁺ regeneration, which contributes to the generation of ·OH at the cathode, and promotes formaldehyde degradation. The control of the reaction region through modification of the electro-Fenton cathode achieved formaldehyde degradation of 35.1 mg L^-1 (48.51% higher than that of the unmodified cathode), which provides a promising process for formaldehyde treatment.

Biochar derived carbonaceous material for various environmental applications: Systematic review

Biochar is the solid material produced from the carbonization of organic feedstock biomass. This material has several unique characteristics such as greater carbon content, good electrical conductivity, high stability and large surface area, which can be applied in several research areas such as generation of power and wastewater treatment. In connection with this, recently, the investigations on biochar significantly focus on the removal of toxic heavy metals since the biochar material is easily available and environmentally friendly. According to an environmental analytical device, biochar-derived carbonaceous material has been additionally applied to the synthesis of an effective, sensitive, and low-cost electrochemical sensor. Biochar with an assessment of electrochemical properties has engaged with different redox reactions in water. In this survey, electrochemical ways of behaving of biochar in light of the electrochemical structures were analytically compiled as well as the impact from biomass sources and manufacturing process including carbonization strategies, pre-treatment/changed techniques. This review emphasizes the various synthesis methods of biochar form organic feedstock, properties and different modulations of biochar for the bioremediation of heavy metals. This review study emphasizes the utilization of biochar as sensing platform and supercapacitor for electrode fabrication in electrochemical biosensor to enhance the remediation of toxic contaminants from water streams and by switching the less ecological traditional materials. Brief information on the techniques employed for packaging biochar as carbon electrode is summarized. Scope in the aspect of environmental concern of biochar, future challenges and prospects are proposed in detail.

Recent advances in electrochemical sensor developments for detecting emerging pollutant in water environment

In the latest times, considerable studies have been performed closer to detecting emerging pollutant such as paracetamol in wastewater. Electrochemical sensor developments have recently started to determine in fewer concentrations effectively. The detection of paracetamol using standard protocols corresponding to electroanalytical techniques has a greater impact noticed in directing the detecting process toward biosensors. Non-enzymatic sensors are the peak of all electro analysis approaches. Functionalized materials, such as metal oxide nanoparticles, conducting polymers, and carbon-based materials for electrode surface functionalization have been used to create a fortification for distributing passive enzyme-free biosensors. Synergic effects are possible by enhancing loading capacity and mass transfer of reactants for attaining high analytical sensitivity using a variety of nanomaterials with large surface areas. The main focus of this study is to address the prevailing issues in the identification of paracetamol with the tasks in the non-enzymatic sensors field, followed by the useful methods of electro analysis studies.

Green synthesis of curcumin-silver nanoparticle and its modified electrode assisted amperometric sensor for the determination of paracetamol

Contamination of paracetamol, a primary analgesic was wide spread in the water system that affects the eco-system. High-dosage of paracetamol to humans cause organ damages and showed adverse effect. It is important to monitor the paracetamol concentration in environmental and human samples periodically. Conventional methods associated with chromatography is found to be high-cost, time consuming and requires high-end instrumentation, Herein, we investigated the role of curcumin during bio-synthesis of silver nanoparticles. The curcumin functionalized silver nanoparticles were further chemically modifying on the electrode surface and the resulting modified electrode was applied for electrocatalytic oxidation of paracetamol. The experimental finding proved that the modified electrode is capable of sensing paracetamol by applying oxidation potential 0.4 V. Both the synthesised material and modified electrode surface were characterized for its physic-chemical properties using spectroscopy and microscopy techniques. The HR-TEM, FESEM and AFM results showed that the distribution of nanoparticle with the size range from 25 to 70 nm and the UV-Vis and Raman spectrophotometer characterization confirms the coordination between SNP and curcumin. Under optimized condition, in 0.1 M NH₄Cl (pH 7) at the scan rate of 50 mVs^-1. The modified electrode enhanced the sensitivity towards the detection of paracetamol in trace level. The modified electrode is capable of sensing paracetamol in a linear range between 0.59 × 10^-6 and 342.1 × 10^-6 M, with LOD of 0.29 μM, and linear regression equation of y = 0.092x+502.6 with a correlation coefficient of R² = 0.996.

Static and dynamic analysis of sulfamethoxazole using GO/ZnO modified glassy carbon electrode by differential pulse voltammetry and amperometry techniques

Surface water contamination of sulfamethoxazole (SMX) has tremendously affected the ecosystem. A primary study was performed to develop an electrochemical sensor for the determination of SMX. Overcoming the demerit associated with the conventional techniques, an electrochemical method was developed using GO/ZnO nanocomposite modified electrode to detect SMX in 0.1 M phosphate buffer (pH-5.5) buffer solution. The GO, ZnO and GO/ZnO nanocomposite were prepared using modified Hummer's, precipitation and sonochemical methods, respectively. Physico-chemical properties of all the materials and its modified electrode were analysed. Comparison was made by studying the SMX sensing performance of electrodes modified with GO, ZnO and GO/ZnO nanocomposites. Out of which GO/ZnO nanocomposite exhibited excellent sensing performance with the concentration range from 0.10 × 10^-6 to 1.5 × 10^-6 M with the limit of detection (LOD) 28.9 nM. The parameters such as electrolyte, effect of pH, scan rate were optimized for effective sensing performance. From the optimized results 0.1 M phosphate buffer was found to be a suitable electrolyte and the pH 5.5 was found to be appropriate to sense SMX at the scan rate 50 mVs^-1. Under optimized condition, the Differential Pulse Voltammetry (DPV) and Amperometry techniques were adopted for electrochemical sensing of SMX under static and hydrodynamic condition. The developed method was successfully tested for real time analysis for the samples collected from waste water treatment plant.

Development of lab-on-chip biosensor for the detection of toxic heavy metals: A review

Recently, a decrease in water availability and quality has been raised due to rapid industrialization, unsustainable agricultural activities and anthropogenic activities. Heavy metals are considered significant pollutants in the water environment, cause environmental hazards and health effects to humans. For monitoring water contaminants utilized different conventional techniques. Still, they have some drawbacks, such as cost expensive, ecological issues, and processing time, requiring technicians and researchers to operate them effectively. Biosensors have become reasonable devices for screening and identifying environmental contaminants because of their different benefits contrasted with other detecting techniques. This review summarizes the toxic effect of heavy metal and their source, occurrence. A detailed discussion is provided on the heavy metal recognition materials for detecting heavy metals in wastewater. Lab on chip (LOC) is an emerging micro-electrical mechanical system (MEMS) device that intakes liquid and makes it move through the micro-channels, to accomplish fast, cost-effective and profoundly sensitive analysis with significant yield. LOC also provided a discussion on numerous laboratory functions on a single platform. This article attempts to discuss the detection of heavy metals using lab on a chip by suitable recognition materials. Further, the design and fabrication mechanism and their recognition abilities of LOC were also reviewed. The review mainly focuses on the application of LOC biosensors, pros, and cons, and suggests a roadmap towards future development to enhance the practical use in pollutant monitoring.

Paving the Way for a Green Transition in the Design of Sensors and Biosensors for the Detection of Volatile Organic Compounds (VOCs)

The efficient and selective detection of volatile organic compounds (VOCs) provides key information for various purposes ranging from the toxicological analysis of indoor/outdoor environments to the diagnosis of diseases or to the investigation of biological processes. In the last decade, different sensors and biosensors providing reliable, rapid, and economic responses in the detection of VOCs have been successfully conceived and applied in numerous practical cases; however, the global necessity of a sustainable development, has driven the design of devices for the detection of VOCs to greener methods. In this review, the most recent and innovative VOC sensors and biosensors with sustainable features are presented. The sensors are grouped into three of the main industrial sectors of daily life, including environmental analysis, highly important for toxicity issues, food packaging tools, especially aimed at avoiding the spoilage of meat and fish, and the diagnosis of diseases, crucial for the early detection of relevant pathological conditions such as cancer and diabetes. The research outcomes presented in the review underly the necessity of preparing sensors with higher efficiency, lower detection limits, improved selectivity, and enhanced sustainable characteristics to fully address the sustainable manufacturing of VOC sensors and biosensors.