Improved visible light photocatalytic degradation of yttrium doped NiMgAl layered triple hydroxides for the effective removal of methylene blue dye

Rational design of CdS-enwrapped polypyrrole nanoparticles for wastewater treatment: removal of hazardous pollutants in aqueous solutions

The modern world requires a chemical industry that can run at low production costs while producing high-quality products with minimal environmental impact. The development of environmentally friendly, cost-effective, and efficient wastewater treatment materials remains a major problem for the sustainable approach. We prepared nanoscale cadmium sulfide (CdS)-enwrapped polypyrrole (PPy) polymer composites for degradation of organic pollutants. The prepared CdS@PPy nanocomposites were characterized by powder X-ray diffraction, scanning electron microscope (SEM), field emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FTIR), and ultraviolet-visible (UV) absorption spectroscopy, indicating proper intercalation between CdS and PPy. Consequently, the catalytic efficiency of the synthesized hybrid nanocomposites was analyzed through the degradation of methylene blue (MB) and rhodamine B (Rh B) under visible light irradiation. The measured degradation efficiency of the dye solutions under the photolysis process is about 18% and 23% for MB and Rh B dye, respectively. Furthermore, the recycle test result concludes that the CdS@PPy composite exhibits 91% and 89% of MB and Rh B dye degradation efficiency even at the 4th cycle, respectively. The positive synergistic impact of CdS and PPy may be the result of effective photocatalytic degradation of MB and RhB.

Multiple phases of yttrium-doped molybdenum trioxide nanorods as efficient dye degrader and bactericidal agents with molecular docking analysis

Contaminants removal is usually becoming an exciting subject of research from water considering their environmental and ecological effects. This work provides pathways to remove organic pollutants from water via nanomaterials and is used as an antibiotic against bacteria like Escherichia coli (E. coli). In this study, molybdenum trioxide (MoO3) and yttrium (Y) doped (2 and 4%) MoO3 nanorods were synthesized by co-precipitation method. Advanced characterization techniques have been introduced to study textural structures, morphological developments, and optical characteristics of produced products. X-ray diffraction studied multiple crystalline structures of prepared samples as hexagonal, orthorhombic, and monoclinic of pure MoO3 with decrease in crystallinity and crystallite size upon Y doping. UV-visible spectroscopy unveiled a redshift (bathochromic effect) in absorption pattern attributed to band gap energy (Eg) decreases. Photoluminescence spectra examined the recombination rate of electrons (e-) and holes (h+) as charge carriers. A sufficient catalytic activity (CA) was observed against methylene blue (MB) dye in an acidic medium (99.74%) and efficient bactericidal action was studied against (E. coli) with zone of inhibition (5.20 mm) for 4% Y-doped MoO3. In addition, in silico docking demonstrated potential inhibitory effect of produced nanomaterials on FabH and FabI enzymes of fatty acid biosynthesis.

Photocatalytic degradation of organic pollutants and inactivation of pathogens under visible light via SnO2/rGO composites

The domains of environmental cleanup and pathogen inactivation are particularly interesting in nanocomposites (NCs) due to their exceptional physicochemical properties. Tin oxide/reduced graphene oxide nanocomposites (SnO₂/rGO NCs) have potential uses in the biological and environmental fields, but little is known about them. This study aimed to investigate the photocatalytic activity and antibacterial efficiency of the nanocomposites. The co-precipitation technique was used to prepare all the samples. XRD, SEM, EDS, TEM, and XPS analyses were employed to characterize the physicochemical properties of SnO₂/rGO NCs for structural analysis. The rGO loading sample resulted in a decrease in the crystallite size of SnO₂ nanoparticles. TEM and SEM images demonstrate the firm adherence of SnO₂ nanoparticles to the rGO sheets. The chemical state and elemental composition of the nanocomposites were validated by the XPS and EDS data. Additionally, the visible-light active photocatalytic and antibacterial capabilities of the synthesized nanocomposites were assessed for the degradation of Orange II and methylene blue, as well as the suppression of the growth of S. aureus and E. coli. As a result, the synthesized SnO₂/rGO NCs are improved photocatalysts and antibacterial agents, expanding their potential in the fields of environmental remediation and water disinfection.

Improvement of Carbonyl Groups and Surface Defects in Carbon Nanotubes to Activate Peroxydisulfate for Tetracycline Degradation

Carbon nanotubes (CNTs) were considered a promising activator for persulfates due to their high electrical conductivity, large specific surface area and low toxicity. The functional groups and surface defects of CNTs could significantly affect their activation performance. In this study, CNTs with high C=O ratio and defect density (CNT-O-H) were prepared through a facile treatment of raw CNTs with HNO₃ oxidation followed by calcination at 800 °C under an argon atmosphere. X-ray photoelectron spectroscopy (XPS) and Raman results showed that the C=O proportion and defect degree (I_D/I_G) rose to 75% and 1.53, respectively. The obtained CNT-O-H possessed a superior performance towards peroxydisulfate (PDS) activation, and the degradation efficiency of tetracycline (TC) in the CNT-O-H/PDS system was increased to 75.2% from 56.2% of the raw CNTs/PDS system within 40 min. Moreover, the activity of CNT-O-H after use could be easily recovered with re-calcination. In addition, the CNT-O-H/PDS system exhibited high adaptabilities towards wide solution pH (2-10), common coexisting substances and diverse organic pollutants. Singlet oxygen (¹O₂) was confirmed to be the dominant reactive oxygen species (ROS) generated in the CNT-O-H/PDS system. It was inferred that surface C=O groups and defects of CNTs were the key site to activate PDS for TC degradation.

Heterogeneous catalysis mediated by light, electricity and enzyme via machine learning: Paradigms, applications and prospects

Energy crisis and environmental pollution have become the bottleneck of human sustainable development. Therefore, there is an urgent need to develop new catalysts for energy production and environmental remediation. Due to the high cost caused by blind screening and limited valuable computing resources, the traditional experimental methods and theoretical calculations are difficult to meet with the requirements. In the past decades, computer science has made great progress, especially in the field of machine learning (ML). As a new research paradigm, ML greatly accelerates the theoretical calculation methods represented by first principal calculation and molecular dynamics, and establish the physical picture of heterogeneous catalytic processes for energy and environment. This review firstly summarized the general research paradigms of ML in the discovery of catalysts. Then, the latest progresses of ML in light-, electricity- and enzyme-mediated heterogeneous catalysis were reviewed from the perspective of catalytic performance, operating conditions and reaction mechanism. The general guidelines of ML for heterogeneous catalysis were proposed. Finally, the existing problems and future development trend of ML in heterogeneous catalysis mediated by light, electricity and enzyme were summarized. We highly expect that this review will facilitate the interaction between ML and heterogeneous catalysis, and illuminate the development prospect of heterogeneous catalysis.

The role of biochar in the photocatalytic treatment of a mixture of Cr(VI) and phenol pollutants: Biochar as a carrier for transferring and storing electrons

Biochar (BC) is widely used to remove environmental pollutants due to its photocatalytic activity. However, the mechanism of BC in photocatalysis remains unclear. In this study, soybean straw biochar (D500), dewatered sludge biochar (S500) and TiO₂/BC composite catalysts were prepared to test their photocatalytic activity in the photocatalysis-dark reaction using phenol and Cr(VI) as the representative pollutants. D500 had a good graphitized structure, layered structure and more active sites, which led to good photocatalytic activity. Compared with D500, S500 did not have a similar structure, resulting in a lack of photocatalytic activity. In addition, the efficiency of Cr(VI) and phenol removal using D500/TiO₂ as a catalyst was higher than that obtained using D500 and TiO₂, respectively. TiO₂ coupled with D500 increased the generation of photoexcited electrons and reduced the recombination of e^--h⁺ pairs. The removal efficiency of TiO₂/D500 for Cr(VI) (80.4 %) and phenol (77.7 %) in the hybrid systems was higher than that of Cr(VI) and phenol in unitary systems. This difference was mainly attributed to the inhibition of e^--h⁺ pair recombination by phenol and Cr(VI), which function as electron quenchers and hole quenchers, respectively. Furthermore, D500 stored electrons under light and released these electrons under dark conditions. When D500 was combined with TiO₂, the electrons on the biochar activated the catalytic redox activity of TiO₂, thereby removing pollutants under dark conditions. Meanwhile, TiO₂/D500 also exhibited good reusability and stability. In summary, this study provides new insight into the role of biochar in photocatalysis.