Recent advances in the chemical oxidation of gaseous volatile organic compounds (VOCs) in liquid phase

Global landscape fire-sourced ambient benzene and health risks in different future scenarios

Landscape fire (wildfire) has a detrimental impact on air quality and human health. However, the contribution of wildfire emissions to ambient benzene concentrations under future climate scenarios remains unknown. To effectively mitigate the adverse effects of wildfire, it is crucial to accurately capture the spatiotemporal trends of wildfire-related ambient benzene and its health impacts. In this study, the GEOS-Chem model was applied to simulate ambient fire-sourced benzene concentrations for 2015-2019 and 2045-2049 across four scenarios. Overall, global observed ambient benzene concentrations and simulated concentrations showed a correlation coefficient of 0.65, indicating robust model performance (p < 0.05). The wildfire-related ambient benzene concentration during 2015-2019 was 0.015 ± 0.011 (mean ± standard deviation) ppb, and then decreased through 2045-2049. Specifically, under the SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5 scenarios, the ambient benzene concentrations were projected at 0.005 ± 0.003, 0.008 ± 0.006, 0.009 ± 0.007, and 0.009 ± 0.007 ppb, respectively. These variations are closely linked to differences in the burned areas, fire activity, and fuel consumption. Wildfire-related ambient benzene concentrations showed significant seasonal variations with high concentrations in summer and autumn, and lower concentrations in winter. This seasonal pattern is likely associated with temperature fluctuations and varying fire activity. Spatially, tropical regions and the northern parts of the US, Canada, and Russia exhibited high wildfire-related ambient benzene concentrations. Although most regions are unaffected by marked carcinogenic or non-carcinogenic risks from ambient benzene, certain boreal and tropical countries remained at higher risks. To address this, better planning and design of natural and urban landscapes is essential to reduce wildfire occurrences, especially in wildfire hotspots. Additionally, controlling carbon emissions can significantly mitigate wildfire-related impacts on air quality.

Risk of overestimating odor control performance with the removal efficiency of a single odorant: Odorant interactions during the chemical absorption

IMPLICATIONS

Chemical absorption is widely applied for odor control, and the interaction between odorants is an important influencing factor of the performance. Hydrogen sulfide, methanethiol, propanethiol and acetaldehyde are common and important odorants emitted during municipal solid waste treatment. This work investigated the removal performance of chemical absorption for the single and mixture of these odorants, and revealed the interaction between them, as well as the risk of overestimating odor performance with the removal efficiency of a single odorant, which can provide insights into optimizing odor control technologies.

Ozone-based advanced oxidation processes in water treatment: recent advances, challenges, and perspective

Water pollution, driven by a variety of enduring contaminants, poses considerable threats to ecosystems, human health, and biodiversity, highlighting the urgent need for innovative and sustainable treatment approaches. Ozone-based advanced oxidation processes (AOPs) have demonstrated significant efficacy in breaking down stubborn pollutants, such as organic micropollutants and pathogens, that are not easily addressed by traditional treatment techniques. This review offers an in-depth analysis of ozonation mechanisms, covering both the direct oxidation by ozone and the indirect reactions facilitated by hydroxyl radicals, emphasizing their effectiveness and adaptability across various wastewater matrices. Significant progress in the combination of ozonation with additional technologies, including UV irradiation, hydrogen peroxide (H₂O₂), catalytic systems, and biological treatments, is examined, highlighting their effectiveness in enhancing pollutant breakdown, increasing biodegradability, and reducing secondary pollution. Hybrid methods, including catalytic ozonation and ozone-biological treatment, show significant enhancements in process efficiency and cost-effectiveness, while effectively tackling challenges associated with energy use and byproduct generation. Despite the promising possibilities, obstacles remain, such as scalability issues, high operational costs, and the risk of generating potentially harmful transformation products. Cutting-edge approaches, including the creation of sophisticated catalysts, integration of processes, and refinement of reactor designs, are suggested to address these challenges and improve the real-world implementation of ozone-based advanced oxidation processes. This review highlights the significant potential of ozone-based advanced oxidation processes as sustainable approaches for wastewater treatment, providing an essential route to environmental conservation and safeguarding public health.

Enhanced treatment of multiphase extraction wastewater from contaminated sites with Cu-Ce modified GAC three-dimensional electrodes

A three-dimensional (3D) electrode system is widely recognized as an effective technology for enhancing electrocatalytic effect. In this study, Cu-Ce modified granular activated carbon (GAC) particle electrodes were prepared using the impregnation method and applied to handle multiphase extraction wastewater. Structural and electrochemical characterization revealed that while the specific surface area of Cu-Ce/GAC decreased by 13.94%, the active area was 2.6 times greater than that of GAC. In addition, the influences of distinct impregnation concentrations, calcination temperatures, and calcination times on the performance of Cu-Ce/GAC electrodes were investigated. The results suggested the optimal preparation conditions of 15 mmol/L, 500 °C and 2 h. Under these conditions, the Cu-Ce/GAC electrode achieved a 92.39% removal of chemical oxygen demand (COD) from a multi-extract of groundwater, with an energy consumption of 13.44 kWh/(kg∙COD). The degradation efficiency improved by 62% compared to the conventional 2D system, while energy consumption decreased by 60%. The main organic pollutants in the multiple extracts, including benzene, toluene, dichloromethane, trichloromethane, were removed at rates exceeding 90% after 60 min treatment. This study yields a methodological and engineering approach for treating multiple extracts wastewater from contaminated groundwater.

Effects of surface fluoride modification on TiO2 for the photocatalytic oxidation of toluene

In the present study, we investigated the influence of surface fluorine (F) on TiO2 for the photocatalytic oxidation (PCO) of toluene. TiO2 modified with different F content was prepared and tested. It was found that with the increasing of F content, the toluene conversion rate first increased and then decreased. However, CO2 mineralization efficiency showed the opposite trend. Based on the characterizations, we revealed that F substitutes the surface hydroxyl of TiO2 to form the structure of Ti-F. The presence of the appropriate amount of surface Ti-F on TiO2 greatly enhanced the separation of photogenerated carriers, which facilitated the generation of ·OH and promoted the activity for the PCO of toluene. It was further revealed that the increase of only ·OH promoted the conversion of toluene to ring-containing intermediates, causing the accumulation of intermediates and then conversely inhibited the ·OH generation, which led to the decrease of the CO2 mineralization efficiency. The above results could provide guidance for the rational design of photocatalysts for toluene oxidation.

A Critical Review of Deep Oxidation of Gaseous Volatile Organic Compounds via Aqueous Advanced Oxidation Processes

Volatile organic compounds (VOCs) are considered to be the most recalcitrant gaseous pollutants due to their high toxicity, diversity, complexity, and stability. Gas-solid catalytic oxidation methods have been intensively studied for VOC treatment while being greatly hampered by energy consumption, catalyst deactivation, and byproduct formation. Recently, aqueous advanced oxidation processes (AOPs) have attracted increasing interest for the deep oxidation of VOCs at room temperature, owing to the generation of abundant reactive oxygen species (ROS). However, current reviews mainly focus on VOC degradation performance and have not clarified the specific reaction process, degradation products, and paths of VOCs in different AOPs. This study systematically reviews recent advances in the application of aqueous AOPs for gaseous VOC removal. First, the VOC gas-liquid mass transfer and chemical oxidation processes are presented. Second, the latest research progress of VOC removal by various ROS is reviewed to study their degradation performances, pathways, and mechanisms. Finally, the current challenges and future strategies are discussed from the perspectives of synergistic oxidation of VOC mixtures, accurate oxidation, and resource utilization of target VOCs via aqueous AOPs. This perspective provides the latest information and research inspiration for the future industrial application of aqueous AOPs for VOC waste gas treatment.

Agri-food waste biosorbents for volatile organic compounds removal from air and industrial gases - A review

Approximately 1.3 billion metric tons of agricultural and food waste is produced annually, highlighting the need for appropriate processing and management strategies. This paper provides an exhaustive overview of the utilization of agri-food waste as a biosorbents for the elimination of volatile organic compounds (VOCs) from gaseous streams. The review paper underscores the critical role of waste management in the context of a circular economy, wherein waste is not viewed as a final product, but rather as a valuable resource for innovative processes. This perspective is consistent with the principles of resource efficiency and sustainability. Various types of waste have been described as effective biosorbents, and methods for biosorbents preparation have been discussed, including thermal treatment, surface activation, and doping with nitrogen, phosphorus, and sulfur atoms. This review further investigates the applications of these biosorbents in adsorbing VOCs from gaseous streams and elucidates the primary mechanisms governing the adsorption process. Additionally, this study sheds light on methods of biosorbents regeneration, which is a key aspect of practical applications. The paper concludes with a critical commentary and discussion of future perspectives in this field, emphasizing the need for more research and innovation in waste management to fully realize the potential of a circular economy. This review serves as a valuable resource for researchers and practitioners interested in the potential use of agri-food waste biosorbents for VOCs removal, marking a significant first step toward considering these aspects together.

The O-Defective g-ZnO Sensor for VOC Gases: The Adsorption-Desorption, Electronic, and Sensitivity Properties

Adsorption-desorption performance, electronic properties, and sensitivity of O-defective g-ZnO (ODZO) gas sensors for volatile organic compounds (VOCs) are calculated using density functional theory and nonequilibrium Green's formalism. The VOCs are CH2O, CH4, C2H4O, CH4O, and C2H6. The intrinsic g-ZnO (IZO) and ODZO exhibit strong adsorption capabilities for C2H4O and CH4O. The IZO (0.118 e) and ODZO (0.059 e), which act as electron donors, exhibit the highest charge transfer to CH2O, indicating a strong interaction. The VOCs adsorption on the IZO and ODZO systems maintain nonmagnetic semiconductor characteristics. Additionally, the introduction of an O-defect causes the adsorption energy and charge transfer amount of ODZO to show an overall decrease, indicating better desorption ability. Notably, the sensitivity results show that the ODZO gas sensors exhibit high sensitivity to CH2O (39.3%), C2H4O (29.0%), and CH4O (19.6%) at a voltage of 2.6 V, consistent with the adsorption-desorption performance and electronic properties.

Unveiling the activity difference cause and ring-opening reaction routes of typical radicals induced degradation of toluene

This study employs five UV-AOPs (PMS, PDS, H2O2, NaClO and NaClO2) to produce radicals (•OH, SO4•-, ClO•, O2•- and 1O2) and further comparatively studies their activity sequence and activity difference cause in toluene degradation. The toluene mineralization efficiency as a descending order is 73 % (UV-PMS) > 71 % (UV-PDS) > 70 % (acidified-UV-NaClO) > 55 % (UV-H2O2) > 36 % (UV-NaClO) > 35 % (UV-NaClO2); that of conversion efficiency is 99 % (acidified-UV-NaClO) > 95 % (UV-PMS) > 90 % (UV-PDS) > 74 % (UV-H2O2) > 44 % (UV-NaClO) > 41 % (UV-NaClO2). Acidic pretreatment significantly boosts the reactivity of UV-NaClO. ESR combined with radical quenching tests reveals the radicals' generation and evolution, and their contribution rates to toluene conversion, i.e. ClO• > SO4•- > O2•- > 1O2 > •OH. Theoretical calculations further unveil the ring-opening reaction routes and the nature of the activity difference of different radicals. The minimum energy required for ring-opening reaction is 116.77, 150.63, 168.29 and 191.92 kJ/mol with respect to ClO•, SO4•-, 1O2 and •OH, and finding that the ClO•-HO• pair is the best for toluene mineralization. The difficulty for eliminating typical VOCs by using UV-AOPs method is determined as toluene > chlorobenzene > benzene > ethyl acetate.

An overview of electrokinetically enhanced chemistry technologies for organochlorine compounds (OCs) remediation from soil

In recent years, electrokinetic (EK) remediation technology has gained significant attention among researchers. This technology has proven effective in the remediation of low-permeability polluted soil. Organochlorines (OCs) are highly toxic, persistent, bioaccumulative, and capable of long-distance migration. They can also accumulate through the food chain, posing significant environmental risks. This paper provides a review of the reaction mechanism of combining chemical technology with EK remediation for the removal of several typical OCs. Furthermore, the factors influencing the efficiency of EK remediation, such as pH and ζ potential, voltage gradients, electrode materials, electrolytes, electrode arrangements, and soil types, are summarized. The paper also presents an overview of recent advancements in the methods of combining chemical technology with EK remediation for the treatment of OCs contaminated soil. Specifically, the research progress in surfactants-combined EK technology, chemical oxidation-combined EK technology, chemical reduction-combined EK technology, and chemical adsorption-combined EK technology is summarized. These findings serve as a foundation for ongoing and future research endeavors in the field. Further exploration and investigation in this area are essential for advancing the field and improving environmental remediation strategies.

Adsorptive removal of benzene and toluene from aqueous solutions by oxygen-functionalized multi-walled carbon nanotubes derived from rice husk waste: A comparative study

One of the current directions for sustainable development is to use waste resources to create materials that reduce environmental pollution. In this study, multi-walled carbon nanotubes (MWCNT) and their oxygen-functionalized forms (HNO₃/H₂SO₄-oxidized MWCNT, NaOCl-oxidized MWCNT, and H₂O₂-oxidized MWCNT) were first synthesized from activated carbon (AC) derived from rice husk waste. A comprehensive comparison of the morphological and structural properties of these materials was conducted using FT-IR, BET, XRD, SEM, TEM, TGA, Raman spectroscopy, and surface charge analysis. The morphology study suggests that the synthesized MWCNTs have an average outer and inner diameter of about 40 and 20 nm, respectively. Additionally, the NaOCl-oxidized MWCNT possesses the largest interspaces between nanotubes, while the HNO₃/H₂SO₄-oxidized CNT has the most oxygen-functional groups, including -COOH, (Ar)-OH, and C-OH. The adsorption capacities of these materials were also compared for the removal of benzene and toluene. Experimental results have shown that while porosity is the primary factor governing the benzene and toluene adsorption onto AC, functionalization degree and surface chemical characteristics are the determining factors in the adsorption capacity of the as-prepared MWCNTs. The adsorption capacity of these aromatic compounds in an aqueous solution increases in the following order: AC < MWCNT < HNO₃/H₂SO₄-oxidized MWCNT < H₂O₂-oxidized MWCNT < NaOCl-oxidized MWCNT, and in all cases, toluene is more readily adsorbed than benzene under similar adsorption conditions. Wherein the uptake of both pollutants by the prepared adsorbents in this study is best described by the Langmuir isotherm and obeys the pseudo-second-order kinetic model. The adsorption mechanism was discussed in a detailed manner.

VOCs absorption from gas streams using deep eutectic solvents - A review

Volatile organic compounds (VOCs) are one of the most severe atmospheric pollutants. They are mainly emitted into the atmosphere from anthropogenic sources such as automobile exhaust, incomplete fuel combustion, and various industrial processes. VOCs not only cause hazards to human health or the environment but also adversely affect industrial installation components due to their specific properties, i.e., corrosive and reactivity. Therefore, much attention is being paid to developing new methods for capturing VOCs from gaseous streams, i.e., air, process streams, waste streams, or gaseous fuels. Among the available technologies, absorption based on deep eutectic solvents (DES) is widely studied as a green alternative to other commercial processes. This literature review presents a critical summary of the achievements in capturing individual VOCs using DES. The types of used DES and their physicochemical properties affecting absorption efficiency, available methods for evaluating the effectiveness of new technologies, and the possibility of regeneration of DES are described. In addition, critical comments on the new gas purification methods and future perspectives are included.

Research progress of bio-slurry remediation technology for organic contaminated soil

Bio-slurry remediation technology, as a controllable bioremediation method, has the significant advantage of high remediation efficiency and can effectively solve the problems of high energy consumption and secondary pollution of traditional organic pollution site remediation technology. To further promote the application of this technology in the remediation of organically polluted soil, this paper summarizes the importance and advantages of bio-slurry remediation technology compared with traditional soil remediation technologies (physical, chemical, and biological). It introduces the technical infrastructure and its technological processes. Then, various factors that may affect its remediation performance are discussed. By analyzing the applications of this technology to the remediation of typical organic pollutant-(polycyclic aromatic hydrocarbons(PAHs), polychlorinated biphenyls(PCBs), total petroleum hydrocarbons(TPH), and pesticide) contaminated sites, the following key features of this remediation technology are summarised: (1) the technology has a wide range of applications and can be used in a versatile way in the remediation projects of various types of organic-contaminated soil sites such as in clay, sand, and high organic matter content soil; (2) the technology is highly controllable. Adjusting environmental parameters and operational conditions, such as nutrients, organic carbon sources (bio-stimulation), inoculants (bio-augmentation), water-to-soil ratio, etc., can control the remediation process, thus improving the restoration performance. To sum up, this bio-slurry remediation technology is an efficient, controllable and green soil remediation technology that has broad application prospects.

Research on electronic nose for compound malodor recognition combined with artificial neural network and linear discriminant analysis

The foul odor of foul gas has many harmful effects on the environment and human health. In order to accurately assess this impact, it is necessary to identify specific malodorous components and levels. In order to meet the qualitative and quantitative identification of the components of malodorous gas, an electronic nose system is developed in this paper. Both principal component analysis (PCA) and linear discriminant analysis (LDA) were used to reduce the dimensionality of the collected data. The reduced-dimensional data are combined with a support vector machine (SVM) and backpropagation (BP) neural network for classification and recognition to compare the recognition results. Regarding qualitative recognition, this paper selects the method of LDA combined with the BP neural network after comparison. Experiments show that the qualitative recognition rate of this method in this study can reach 100%, and the amount of data after LDA dimensionality reduction is small, which speeds up the pattern speed of recognition. Regarding quantitative identification, this paper proposes a prediction experiment through Partial least squares (PLS) and BP neural networks. The experiment shows that the average relative error of the trained BP network is within 6%. Finally, the experiment of quantitative analysis of malodorous compound gas by this system shows that the maximum relative error of this method is only 4.238%. This system has higher accuracy and faster recognition speed than traditional methods.

Volatile organic compounds in water matrices: Recent progress, challenges, and perspective

Volatile organic compounds (VOCs) are a group of organic compounds that have a molecular structure containing carbon and their chemical properties allow them to be easily converted to steam and gas and remain for a long period of time and have diverse effects on the environment. The purpose of this study is determination of the concentration of VOCs such as alachlor, anthracene, benzene, bromoform, chloroform, heptachlor, isophorone, tetrachloroethylene, γ -chlordane, toluene, etc. in water matrices. The results showed that among studies conducted on VOCs, the concentration of tetrachloroethylene, m,p-xylene, and toluene were at the top in water matrices, and the lowest average concentrations were found in chloroform, anthracene, and butyl benzyl phthalate. In terms of VOC concentrations in water matrices, China was the most polluted country. Moreover, the data analysis indicated that China was the only country with carcinogenic risk. A Monte-Carlo simulation showed that although the averages obtained were comparable to the acceptable limits, for heptachlor, the maximum carcinogenic risk is achieved at a level that is slightly over the limit, only 25% from the population being exposed.

Performance of bioelectrochemical systems in treating exhaust gas with power generation: Effects of shock-load, shut-down episodes and microbial community

A diffusive packed anode-bioelectrochemical (Dpa-Bes) system was constructed by feeding waste gas from the cathode to the anode tank in DPa-Bes through a proton exchange membrane (PEM). The high removal of oxygen by the PEM and the effective combination of the two packing materials reduced the electron loss and enhanced the proton transfer capacity, promoting the removal of acetone from the exhaust gas and increasing the output power. The maximum acetone removal efficiency of the modified Dpa-Bes reached ∼99 % after seven days of closed-circuit operation, with a 3.2-fold increase in maximum power density and a 2.27-fold increase in closed-circuit voltage relative to those of the unmodified Dpa-Bes. When the acetone concentration was 2400 ppm, the removal efficiency was 73.22 % and the elimination capacity was at its highest value of 290.21 g/m³/h. Microbial analysis revealed that the conductive filter contained abundant facultative and anaerobic bacteria, whereas the non-conductive filter was rich in aerobic bacteria. The abundance of anaerobic and facultative microorganisms in Dpa-Bes was much higher than in the unmodified Dpa-Bes, and the dominant bacteria were Flavobacterium and Ferruginibacter.