Biochar in environmental friendly fertilizers - Prospects of development products and technologies

Comprehensive evaluation of bioavailable phosphorus in biochar synthesized by co-pyrolysis of sewage sludge and straw ash

The world's phosphorus (P) resources are gradually depleting. Sewage sludge is an important secondary P resource, and sludge-derived biochar for land use is an effective way to achieve P recovery. However, P in biochar synthesized by direct pyrolysis of sludge usually shows comparatively low bioavailability. In this study, biomass ash from different types of straw was used as an additive for co-pyrolysis with sludge. The distribution of different P fractions in the obtained co-pyrolyzed biochar was investigated. The P bioavailability of the co-pyrolyzed biochar was comprehensively evaluated by three methods, including chemical extraction, diffusive gradients in thin films (DGT) technology and pot experiments. The results indicate that the bioavailable P in co-pyrolyzed biochar is significantly positively correlated with the contents of K, Ca, and Mg elements in straw ash, which facilitate the transformation of P in sludge into forms that are more easily utilized by plants, including monetite (CaHPO4), hydroxyapatite (Ca5(PO4)3OH) and pyrocoproite (K2MgP2O7). Moreover, pot experiments show that the P contents in ryegrass shoots and roots cultivated in co-pyrolyzed biochar-added soils increased by 11.98-114.97 % and 28.90-69.70 %, respectively, compared to the control soil. The DGT technology could better reflect the uptake of P by plants with a Pearson correlation coefficient as high as 0.94. This study provides references for P resource recovery, and the collaborative reutilization of sewage sludge and straw ash.

Metal-doped biochar for selective recovery and reuse of phosphate from water: Modification design, removal mechanism, and reutilization strategy

Phosphorus (P) plays a crucial role in plant growth, which can provide nutrients for plants. Nonetheless, excessive phosphate can cause eutrophication of water, deterioration of aquatic environment, and even harm for human health. Therefore, adopting feasible adsorption technology to remove phosphate from water is necessary. Biochar (BC) has received wide attention for its low cost and environment-friendly properties. However, undeveloped pore structure and limited surface groups of primary BC result in poor uptake performance. Consequently, this work introduced the synthesis of pristine BC, parameters influencing phosphate removal, and corresponding mechanisms. Moreover, multifarious metal-doped BCs were summarized with related design principles. Meanwhile, mechanisms of selective phosphate adsorption by metal-doped BC were investigated deeply, and the recovery of phosphate from water, and the utilization of phosphate-loaded adsorbents in soil were critically presented. Finally, challenges and prospects for widespread applications of selective phosphate adsorption were proposed in the future.

Research on the enhancement material and culture method of soil aggregates composed of feldspathic sandstone and sand

The Mu Us Sandy Land is a region characterized by wind-blown sand and soil erosion in northern China. To enhance the soil quality of this area, various organic materials were incorporated into the mixed soil at a volume ratio of 1:2 for feldspathic sandstone to sand. Culture was conducted in the field and under constant temperature conditions in laboratory culture chambers. Four treatments were established in the experiment, each calculated based on weight ratio and controlled (with no organic material added, CK); single application of straw (5% straw, P1); single application of biochar (5% biochar, P2); combined application of biochar and straw (5% biochar + 5% straw, P3). After 90 days of culture, soil samples were collected for analysis of various indicators such as soil aggregate particle size distribution, water stability of soil aggregates, mean weight diameter, mean geometric diameter, and fractal dimension using dry sieving and wet sieving methods. The objective is to establish a scientific basis and provide technical support for addressing the challenges associated with compound soil and implementing rational fertilization measures. The research results indicate that: (1) The quantity of aggregates > 0.25 mm under different treatments follows the order CK < P1 < P2 < P3, and the differences between treatments are significant (P < 0.05); (2) Soil water stability, mean weight diameter (MWD), mean geometric diameter (GMD), and fractal dimension of soil aggregates in compound soil with different organic material additions are superior to the control, and the effect of biochar on improving soil aggregates is better than that of corn straw. The combined application of both significantly improves the effect compared to single applications. In both culture modes, under wet sieving, the P3 treatment shows the highest MWD and GMD of soil aggregates, with an increase ranging from 3.45% to 85% and 4.55% to 38.46%, respectively, compared to other treatments. (3) The trend of fractal dimension among treatments is consistent: P3 < P2 < P1 < CK, and the differences between treatments are significant (P < 0.05). Moreover, there is a good negative correlation linear equation relationship between the fractal dimension (y) and WR > 0.25 (x) of compound soil, with a correlation coefficient of up to 0.9851. In conclusion, the incorporation of organic materials can effectively enhance the proportion of macroaggregates in compound soil consisting of Feldspathic sandstone and sand, thereby improving soil stability and erosion resistance. The optimal outcome is achieved through the combined application of biochar and straw. Indoor culture proves to be more effective than field culture, while wet sieving accurately reflects the structural characteristics of compound soil under both dry and wet sieving treatments.

Lignocellulosic biomass fertilizers: Production, characterization, and agri-applications

The growing focus on sustainable agriculture and optimal resource utilization has spurred investigations into lignocellulosic biomass as a potential source for producing environmentally friendly fertilizers. This paper reviews recent advancements in the production and application of innovative fertilizers derived from lignocellulose. It highlights potential in enhancing agricultural productivity and reducing environmental impacts such as carbon footprint and water pollution. The paper outlines various methods for conversion, highlighting the unique advantages of chemical, enzymatic, and microbiological processes, for converting lignocellulosic biomass into nutrient-rich fertilizers. The study compares the efficacy of lignocellulosic fertilizers to traditional fertilizers in promoting crop growth, enhancing soil health, and reducing nutrient losses. The results demonstrate the potential of lignocellulosic biomass-derived fertilizers in promoting resource efficiency and sustainable agriculture. While this research significantly contributes to the existing body of knowledge, further studies on long-term impacts and scalability are recommended for the development of innovative and sustainable agricultural practices.

Pyrolysis, a recovery solution to reduce landfilling of residual organic waste generated from mixed municipal waste

Despite policies to restrict the mixing of organic waste with other general waste and improve its separation at source, municipal solid waste still contains a high proportion of organic waste. The residual organic waste is generated as a by-product of the mechanical treatment of municipal solid waste (MSW) and is mainly disposed in landfills after composting. Its reuse and recovery status varies across European countries. Most countries restrict the use of biostabilised residual waste (BSRW) to landfill cover, whereas others have regulated it as marketable compost. Crucially, BSRW is set to lose its "recycled" status under the revised European Union waste framework, with probably tighter restrictions and increased costs imposed for the landfilling of organic waste. Our research aimed to investigate pyrolysis as an alternative technology to treat the 10-40 mm fraction of BSRW (representing 50% of BSRW generated). Pyrolysis at 700 °C was carried out and feedstock and pyrolysis products were characterized. Mass and energy balances showed that pyrolysis produced hot vapour/gas whose combustion may render the pyrolysis process energetically sustainable. Biochar comprises 30-50% of BRSW mass after removal of glass, metal and stones. Our results indicate that pyrolysis has the potential to create options for contributing to reduce the landfilling of BSRW; however, the presence of residual impurities may limit biochar applications.

Remediation of neonicotinoid-contaminated soils using peanut shell biochar and composted chicken manure: Transformation mechanisms of geochemical fractions

Soil remediation techniques are promising approaches to relieve the adverse environmental impacts in soils caused by neonicotinoids application. This study systematically investigated the remediation mechanisms for peanut shell biochar (PSB) and composted chicken manure (CCM) on neonicotinoid-contaminated soils from the perspective of transformation of geochemical fractions by combining a 3-step sequential extraction procedure and non-steady state model. The neonicotinoid geochemical fractions were divided into labile, moderate-adsorbed, stable-adsorbed, bound, and degradable fractions. The PSB and CCM addition stimulated the neonicotinoid transformation in soils from labile fraction to moderate-adsorbed and stable-adsorbed fractions. Compared with unamended soils, the labile fractions decreased from 47.6% ± 11.8% of the initial concentrations to 12.1 ± 9.3% in PSB-amended soils, and 7.1 ± 4.9% in PSB and CCM-amended soils, while the proportions of moderate-adsorbed and stable-adsorbed fractions correspondingly increased by 1.8-2.4 times and 2.3-4.8 times, respectively. A small proportion (<4.8%) in bound fractions suggested there were rather limited bound-residues after 48 days incubation. The PSB stimulated the -NO2-containing neonicotinoid-degraders, which promoted the degradable fractions of corresponding neonicotinoids by 8.2 ± 6.3%. Degradable fraction of neonicotinoids was the dominant fate in soils, which accounted for 58.3 ± 16.7%. The findings made beneficial theoretical supplements and provided valuable empirical evidence for the remediation of neonicotinoid-contaminated soils.

Recent trends and economic significance of modified/functionalized biochars for remediation of environmental pollutants

The pollution of soil and aquatic systems by inorganic and organic chemicals has become a global concern. Economical, eco-friendly, and sustainable solutions are direly required to alleviate the deleterious effects of these chemicals to ensure human well-being and environmental sustainability. In recent decades, biochar has emerged as an efficient material encompassing huge potential to decontaminate a wide range of pollutants from soil and aquatic systems. However, the application of raw biochars for pollutant remediation is confronting a major challenge of not getting the desired decontamination results due to its specific properties. Thus, multiple functionalizing/modification techniques have been introduced to alter the physicochemical and molecular attributes of biochars to increase their efficacy in environmental remediation. This review provides a comprehensive overview of the latest advancements in developing multiple functionalized/modified biochars via biological and other physiochemical techniques. Related mechanisms and further applications of multiple modified biochar in soil and water systems remediation have been discussed and summarized. Furthermore, existing research gaps and challenges are discussed, as well as further study needs are suggested. This work epitomizes the scientific prospects for a complete understanding of employing modified biochar as an efficient candidate for the decontamination of polluted soil and water systems for regenerative development.

Study on the influence mechanism of adoption of smart agriculture technology behavior

Smart agricultural (SA) technology has become a technological support for modern agriculture. By exploring the decision-making process and psychological motivation of farmers in adopting SA technology, it is conducive to achieving the popularisation of SA technology and promoting the modernisation of agriculture. Based on microscopic research data, a Structural Equation Model (SEM) is used to analyse the influencing factors and extent of cotton farmers' adoption of SA technologies, using Deconstructive Theory of Planned Behavior (DTPB) as the analytical framework. This was combined with in-depth interviews to further reveal the motivations and influencing mechanisms of cotton farmers' adoption of SA technologies. The results show that under the behavioural belief dimension, cotton farmers value the positive effect of perceived usefulness even though the risk of the technology itself has a dampening effect on adoption intentions. Under the normative belief dimension, superior influence influenced the willingness to adopt SA technologies to a greater extent than peer influence. Under the control belief dimension, factors such as self-efficacy and information channels influence willingness to adopt technology and behaviour. In addition, behavioural attitudes, subjective norms, and perceived behavioural control all contribute to cotton farmers' willingness to adopt SA technologies, and can also influence behaviour directly or indirectly through willingness to adopt. Policy and technology satisfaction positively moderate the transition from willingness to behaviour. Therefore, preferential policies are proposed to reduce the cost of adopting SA technologies; to continuously improve the level of SA technologies; to establish SA technology test plots to provide a reference base; and to increase knowledge training on SA and expand access to information.

Techno-economic assessment of biorefinery scenarios based on mollusc and fish residuals

Biorefineries aim to maximise resource recovery from organic sources that have been traditionally considered wastes. In this respect, leftovers from mollusc and seafood processing industries can be a source of multiple bioproducts such as protein hydrolysates (PH), calcium carbonate and co-composted biochar (COMBI). This study aims to evaluate different scenarios of biorefineries fed by mollusc (MW) and fish wastes (FW) to understand which is the most convenient to maximise their profitability. Results showed that the FW-based biorefinery obtained the highest revenues with respect to the amounts of waste treated, i.e., 955.1 €·t^-1 and payback period (2.9 years). However, including MW in the biorefinery showed to increase total income as a higher amount of feedstock could be supplied to the system. The profitability of the biorefineries was mainly dependent on the selling price of hydrolysates (considered as 2 €·kg^-1 in this study). However, it also entailed the highest operating costs (72.5-83.8% of total OPEX). This highlights the importance of producing high-quality PH in economic and sustainable way to increase the feasibility of the biorefinery.

Activated ZnCl2 biochar and humic acid as additives in monoammonium phosphate fertilizer: Physicochemical characterization and agronomic effectiveness

Activated zinc biochar (ZnBC) and humic acid (HA) were used as coating agents in a soluble monoammonium phosphate (MAP) to modify phosphorus (P) use efficiency by altering adsorption/desorption kinetics between the granule region and the soil. The coated treatments MAPZnBC and MAPHA were compared with MAP through P diffusivity, kinetics, and agronomic evaluation. Eucalyptus sawdust was used as biomass for biochar synthesis, and a pre-pyrolysis treatment with zinc chloride (ZnCl₂) was applied. The P diffusivity was evaluated in the fertosphere zone. Adsorption and desorption potential of the ZnBC compared with control biochar (BC) was evaluated separately. Desorption kinetics of P from soil was assessed after incubation with MAPZnBC and MAPHA. The shoot dry matter yield (SDM), P uptake, and P use efficiency (PUE) were evaluated with a pot experiment in a clay Oxisol sown with maize and soybeans as successive plant trials, under glasshouse conditions. Surface area values of 940 and 305 m² g^-1 combined with adsorption capacities of 106 and 53 mg P g^-1 for ZnBC and BC, respectively, confirm the increased capacity of activated biochar to adsorb P. Both MAPZnBC and MAPHA decreased P diffusivity compared to MAP after 20 days of incubation. Moreover, MAPZnBC and MAPHA presented 20% and 34% more water-soluble phosphorus recovery. MAPZnBC expressed an increase in SDM while MAPHA highlighted P uptake and PUE compared with MAP. Both kinetic studies and agronomic evaluations showed that ZnBC and HA are suitable as coatings for phosphate fertilizers in terms of increasing P efficiency in the fertosphere on high P-fixing soils.

Statistical optimization of a sustainable fertilizer composition based on black soldier fly larvae as source of nitrogen

In the present work, a statistical optimization of a sustainable coating for core-shell NPK (Nitrogen-Phosphorus-Potassium) fertilizers was investigated. The environmental green coating was enriched in nitrogen using a biomass and renewable source, namely the nitrogen rich fraction of black soldier fly larvae (BSFL) (Hermetia Illucens, Diptera: Stratiomyidae) reared on vegetable waste. A rational approach was proposed with the aim of calculating the best formulation of the coating, considering both its manufacturing behavior, such as adhesion to the core, and its physical properties, such as homogeneity or plasticity. From a circular economy perspective, together with the nitrogen-rich fraction from BSFL (from 51 to 90 wt.%), water and glycerol were considered for the coating formulation in different proportion: from 10 to 32 wt.% and from 0 to 17 wt.% respectively. The Design of Experiments technique was implemented to limit the total number of tests for the coating formulation (18 tests). ANOVA was employed, with the aim of obtaining mathematical models to derive a better precise and objective formulation. The results show that the use of glycerol can be avoided, as well as only a limited amount of water (11 wt.%) is necessary to obtain an optimized coating formulation, thereafter, satisfying the more relevant technological and physical properties for the coating manufacturing.

Combined remediation effects of biochar and organic fertilizer on immobilization and dissipation of neonicotinoids in soils

Neonicotinoid (NEO) pesticides have become a potential risk to ecological safety and human health after application. The combined use of biochar and organic fertilizer (OF) is a promising approach to reduce pesticide adverse effects and improve soil fertility in agricultural soils. However, the combined remediation effects of biochar and OF on immobilization and dissipation of NEOs in soils have not previously been systematically investigated. In this study, biochars derived from peanut shell prepared at low/high pyrolysis temperatures (PS400 and PS900) were combined with composted chicken manure (CCM) as an example for OF to remediate contaminated soils toward six typical NEOs, nitenpyram (NIT), thiamethoxam (THIA), clothianidin (CLO), imidacloprid (IMI), acetamiprid (ACE), thiacloprid (THI). Results shown that both biochars and CCM were effective in improving soil sorption capacity and immobilization efficiency. The Freundlich affinity parameters (K_f) of NEOs in soils increased 7.2-12.0 times after the combined remediation of biochar and CCM, and the K_f of six NEOs had negative correlation with their lipophilicity (p < 0.05), which followed by THI > ACE ≈ IMI > CLO > THIA > NIT. Meanwhile, NEOs-abiotic degradation was accelerated by biochar, CCM and their combined addition by adjusting soil pH and stimulating hydrolysis action. Biotic degradation was dominant in NEOs dissipation processes in amended soils, and the contribution ratios of biotic degradation (CR_bio) were in the range of 25.4-99.0%. The combined use of biochar and CCM selectively stimulated the relative abundance of NEOs-degraders, which simplified abiotic degradation of -NO₂-containing NEOs (viz., NIT, THIA, CLO, and IMI), but inhibited -C≡N-containing NEOs (viz., ACE and THI). The combined remediation provided a strategy for immobilizing NEOs and facilitating dissipation of -NO₂-containing NEOs in soils. The results in this study provide valuable information for policymakers and decision-makers to choose appropriate soil remediation approaches with respect to the NEO types.

Some Results of Poultry Litter Processing into a Fertilizer by the Wet Torrefaction Method in a Fluidized Bed

Poultry litter mass is formed in large quantities at poultry farms producing poultry meat (1–3 kg of litter mass per 1 kg of produced meat). These wastes represent a threat to the environment because of the presence of pathogenic microflora in them and the greenhouse gas emitted during the storage of these wastes. The procedure of poultry litter mass processing by wet torrefaction in a superheated water vapor environment at a temperature of 150–260 °C is studied. It is shown that after torrefaction at a temperature of 150 °C, the poultry litter mass retains high humidity, i.e., it represents an environment suitable for the re-development of pathogenic microflora. Only after wet torrefaction at a temperature of 260 °C does the humidity of the poultry litter mass decreases to 4%, and the risk of re-infection with pathogenic microflora decreases sharply. The absence of nitrates in the samples after torrefaction at a temperature of 260 °C indicates the termination of the activity of nitrifying bacteria. After torrefaction at a temperature of 260 °C, the poultry litter mass has a pH close to 7. This increases the mobility and availability of microelements for plants. Torrefaction at a temperature of 260 °C increases the content of ash, phosphorus and potassium by 30–40% and nitrogen by 15–20%, which makes the fertilizer more concentrated and optimizes the ratio of nitrogen, phosphorus and potassium. After wet torrefaction, due to the burning of the most easily degradable nitrogen-containing organic compounds and the destruction of some organophosphorus compounds, the mobility of nitrogen decreases, and the mobility of phosphorus increases. As a result of the research, it was found that the treatment of poultry manure by wet torrefaction in an environment of superheated water vapor at a temperature not lower than 260 °C makes it possible to obtain organic fertilizer with the most optimal nutrient content.