Light driven Aspergillus niger-ZnS nanobiohybrids for degradation of methyl orange

Photocatalytic material-microorganism hybrid systems in water decontamination

Biological processes are widely used technologies for water decontamination, but they are often limited by insufficient bioavailable carbon sources or biorecalcitrant contaminants. The recently developed photocatalytic material-microorganism hybrid (PMH) system combines the light-harvesting capacities of photocatalytic materials with specific enzymatic activities of whole cells, efficiently achieving solar-to-chemical conversion. By integrating the benefits of both photocatalysis and biological processes, the PMH system shows great potential for water decontamination. While recent reviews have focused primarily on its application in green energy development, this review emphasizes the latest advancements in PMH systems for water decontamination, covering various applications, key considerations, and synergistic mechanisms. This review aims to provide a fundamental understanding of the PMH system and explore its broader potential in environmental remediation.

Harnessing microbes to pioneer environmental biophotoelectrochemistry

In seeking sustainable environmental strategies, microbial biophotoelectrochemistry (BPEC) systems represent a significant advancement. In this review, we underscore the shift from conventional bioenergy systems to sophisticated BPEC applications, emphasizing their utility in leveraging solar energy for essential biochemical conversions. Recent progress in BPEC technology has facilitated improved photoelectron transfer and system stability, resulting in substantial advancements in carbon and nitrogen fixation, degradation of pollutants, and energy recovery from wastewater. Advances in system design and synthetic biology have expanded the potential of BPEC for environmental clean-up and sustainable energy generation. We also highlight the challenges of environmental BPEC systems, ranging from performance improvement to future applications.

Development of photoactive ZnS-SiO2 composites on biogenic silica matrix for organic pollutant degradation

Sulfide ZnS-SiO2 composite photocatalysts with biogenic silica matrix were prepared by sol-gel method based on wet gel and xerogel. FT-IR, SEM, XRD, EDXRF, UV-Vis, and XPS methods were systematically used to characterize the obtained materials. The use of support allowed to obtain stable porous (SBET = 79-105 m2 g-1; Vpore = 0.25-0.17 cm3·g-1) ZnS-SiO2 photocatalysts in aqueous solutions. Zn2+ content in methyl orange solution after its degradation was 0.4 MPC. ZnS-SiO2 composites had 3.68-3.70 eV band gap. The obtained materials were photoactive under different irradiation conditions (sunlight, UV-light, Xenon light, visible light) due to effective separation of charge carriers (e- and h+). Methyl orange degradation degree under UV light excitation was 35-88%, under sunlight - 11-30%. ZnS-SiO2 composite synthesized using silica xerogel showed a greater photoactivity due to a presence of cone-shaped or cylindrical pores with one open end in its structure and a higher content of ZnS photoactive component. A comparative study of photocatalytic performance of methyl orange degradation by ZnS-SiO2 under UV irradiation was investigated using radical scavengers. •O2- was main active species during MO degradation under UV irradiation, and electrons played additional role during the photocatalytic process.

The enhancement effect of n-Fe3O4 on methyl orange reduction by nitrogen-fixing bacteria consortium

Although the anaerobic reduction of azo dyes is ecofriendly, high ammonia consumption remains a significant challenge. This work enriched a mixed nitrogen-fixing bacteria consortium (NFBC) using n-Fe3O4 to promote the anaerobic reduction of methyl orange (MO) without exogenous nitrogen. The enriched NFBC was dominated by Klebsiella (80.77 %) and Clostridium (17.16 %), and achieved a 92.7 % reduction of MO with an initial concentration of 25 mg·L-1. Compared with the control, the consortium increased the reduction efficiency of MO, cytochrome c content, and electron transport system (ETS) activity by 11.86 %, 89.86 %, and 58.49 %, respectively. When using 2.5 g·L-1 n-Fe3O4, the extracellular polymeric substances (EPS) of NFBC were present in a concentration of 85.35 mg·g-1. The specific reduction rates of MO by NFBC were 2.26 and 3.30 times faster than those of Fe(II) and Fe(III), respectively, while the enrichment factor of the ribosome pathway in NFBC exceeded 0.75. Transcriptome, carbon consumption, and EPS analyses suggested that n-Fe3O4 stimulated carbon metabolism and secreted protein synthesized by the mixed culture. The latter occurred due to the increased activity of consortium and the content of redox substances. These findings demonstrate that n-Fe3O4 promoted the efficiency of mixed nitrogen-fixing bacteria for removing azo dyes from wastewater. This innovative approach highlights the potential of integrating nanomaterials with biological systems to effectively address complex pollution challenges.

Enhanced Adsorption of Methyl Orange from Aqueous Phase Using Chitosan-Palmer Amaranth Biochar Composite Microspheres

To develop valuable applications for the invasive weed Palmer amaranth, we utilized it as a novel biochar source and explored its potential for methyl orange adsorption through the synthesis of chitosan-encapsulated Palmer amaranth biochar composite microspheres. Firstly, the prepared microspheres were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy and were demonstrated to have a surface area of 19.6 m2/g, a total pore volume of 0.0664 cm3/g and an average pore diameter of 10.6 nm. Then, the influences of pH, dosage and salt type and concentration on the adsorption efficiency were systematically investigated alongside the adsorption kinetics, isotherms, and thermodynamics. The results reveal that the highest adsorption capacity of methyl orange was obtained at pH 4.0. The adsorption process was well fitted by a pseudo-second-order kinetic model and the Langmuir isotherm model, and was spontaneous and endothermic. Through the Langmuir model, the maximal adsorption capacities of methyl orange were calculated as 495.0, 537.1 and 554.3 mg/g at 25.0, 35.0 and 45.0 °C, respectively. Subsequently, the adsorption mechanisms were elucidated by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy investigations. It is indicated that electrostatic interactions, hydrogen bonding, π-π interactions and hydrophobic interactions between methyl orange and the composite microspheres were pivotal for the adsorption process. Finally, the regeneration studies demonstrated that after five adsorption-desorption cycles, the microspheres still maintained 93.6% of their initial adsorption capacity for methyl orange. This work not only presents a promising method for mitigating methyl orange pollution but also offers a sustainable approach to managing Palmer amaranth invasion.

Hydrothermally synthesized Ag-TiO2 nanofibers (NFs) for photocatalytic dye degradation and antibacterial activity

This work successfully utilised eco-friendly green synthesis to produce Ag-TiO₂ nanofibers (NFs). As pollution and energy limitations have become global issues, there is an ongoing need to develop more effective catalysts through straightforward and environmentally friendly methods. The Ag-TiO₂ nanofibers (NFs) XRD pattern exhibits an anatase TiO₂ and FCC crystal structure of Ag nanoparticles. The SEM investigation revealed a nanofiber-like surface morphology. The Ag-TiO₂ nanofibers (NFs) exhibits an optical band gap energy is 2.5 eV. Methylene blue (MB), malachite green (MG), Congo red (CR), and crystal violet (CV) dye aqueous solutions were used to evaluate the photocatalytic performance of the synthesized Ag-modified TiO₂ nanofibers (NFs) under direct sunlight irradiation. The effects of catalyst size on the efficient breakdown of MB dye were also investigated. The optimum catalyst concentration was found to be at 0.02 mg/mL. At 120 min of direct sunlight, the highest photosynthetic degradation efficiency (DE percentage) of 94% was achieved for MB dye. Ag-TiO₂ nanofibers (NFs) have been demonstrated to have exceptional antibacterial activity against Gram-positive bacteria such as Staphylococcus aureus and Gram-negative bacteria E-Coli. Because of these great qualities, it seems likely that the Ag-TiO₂ nanofibers (NFs) made could be a great photocatalyst for getting dye pollutants out of wastewater.

Enhanced production of amylase, pyruvate and phenolic compounds from glucose by light-driven Aspergillus niger-CuS nanobiohybrids

BACKGROUND

The demand for value-added compounds such as amylase, pyruvate and phenolic compounds produced by biological methods has prompted the rapid development of advanced technologies for their enhanced production. Nanobiohybrids (NBs) make use of both the microbial properties of whole-cell microorganisms and the light-harvesting efficiency of semiconductors. Photosynthetic NBs were constructed that link the biosynthetic pathways of Aspergillus niger with CuS nanoparticles.

RESULTS

In this work, NB formation was confirmed by negative values of the interaction energy, i.e., 2.31 × 10⁸ to -5.52 × 10⁸ kJ mol^-1 for CuS-Che NBs, whereas for CuS-Bio NBs the values were -2.31 × 10⁸ to -4.62 × 10⁸ kJ mol^-1 for CuS-Bio NBs with spherical nanoparticle interaction. For CuS-Bio NBs with nanorod interaction, it ranged from -2.3 × 10⁷ to -3.47 × 10⁷ kJ mol^-1 . Further, the morphological changes observed by scanning electron microscopy showed the presence of the elements Cu and S in the energy-dispersive X-ray spectra and the presence of CuS bonds in Fourier transform infrared spectroscopy indicate NB formation. In addition, the quenching effect in photoluminescence studies confirmed NB formation. Production yields of amylase, phenolic compounds and pyruvate amounted to 11.2 μmol L^-1, 52.5 μmol L^-1 and 28 nmol μL^-1, respectively, in A. niger-CuS Bio NBs on the third day of incubation in the bioreactor. Moreover, A niger cells-CuS Bio NBs had amino acids and lipid yields of 6.2 mg mL^-1 and 26.5 mg L^-1, respectively. Furthermore, probable mechanisms for the enhanced production of amylase, pyruvate and phenolic compounds are proposed.

CONCLUSION

Aspergillus niger-CuS NBs were used for the production of the amylase enzyme and value-added compounds such as pyruvate and phenolic compounds. Aspergillus niger-CuS Bio NBs showed a greater efficiency compared to A. niger-CuS Che NBs as the biologically produced CuS nanoparticles had a higher compatibility with A. niger cells. © 2022 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).

Cornstalk biochar-TiO2 composites as alternative photocatalyst for degrading methyl orange

Dye wastewater is one of the most harmful wastewater types generated during industrial processes. Effectively treating dye wastewater is essential. This study used TiO₂ and cornstalk biochar to prepare biochar-TiO₂ composites in order to treat methyl orange (MO) in the water. It is found that composites prepared using biochar generated at 700 ℃ and TiO₂/biochar mass ratio values of 0.75/1 showed the best performance on decolorization efficiency and mineralization efficiency of MO while low pH, low initial MO concentration, and 1 g/L of composite amount added can enhance MO degradation efficiency. Additionally, it is also noted that biochar-TiO₂ composites were easier to separate from water compared to pure TiO₂. This benefits the recycling of biochar-TiO₂ composites after application. Furthermore, the study indicated that the biochar-TiO₂ composites degrade MO by a combination of adsorption and photocatalysis while photoelectron (e^-) and ·O₂^- are the key species participating in photocatalytic degradation of MO. These research outcomes suggest that cornstalk biochar and TiO₂ can be used to prepare composites, which can be seen as an alternative photocatalyst for dye wastewater treatment. However, further investigations related to their long-term applications and in real scale projects are recommended.

Photocatalytic mechanism conversion of titanium dioxide induced via surface interface coordination

Photocatalytic removal of organic pollutants is a promising pollution treatment technology from the aspect of carbon neutrality. The complex diversity of actual wastewater components, as opposed to single-component systems, can significantly affect photocatalytic mechanisms. In this study, complex pollutant systems were created using various coordinating agents, and the effects of P25 on the photocatalytic removal of methyl orange (MO) in these systems and corresponding photocatalytic mechanism were investigated. The results show that photocatalytic removal of MO by P25 using ligands is significantly more efficient, especial removal of MO by the EDTA-P25 (P-E_2.5) coordination system resulted dramatically improved MO removal (97.4% versus 12.3% achieved by pure P25 after 15 min), with the reaction rate improved 23.8-fold. Theoretical calculations show that the effective coordination bonds formed by the coordinating agent and Ti atoms reduce the adsorption energy of P25 for MO. In addition, introduction of the coordinating agent EDTA reduces the transition state energy during the MO degradation process and greatly accelerates the reaction rate, and the conduction band position of the EDTA-P25 coordination system shifts to a more negative potential, which induces to the generation of •O₂^- for effective MO degradation.

Green Derived Zinc Oxide (ZnO) for the Degradation of Dyes from Wastewater and Their Antimicrobial Activity: A Review

The quest for eco-friendly synthetic routes that can be used for the development of multifunctional materials, in particular for water treatment, has reinforced the use of plant extracts as replacement solvents in their use as reducing and capping agents during the synthesis of green derived materials. Amongst the various nanoparticles, Zinc Oxide (ZnO) has emerged as one of the preferred candidates for photocatalysis due to its optical properties. Moreover, ZnO has also been reported to possess antimicrobial properties against various bacterial strains such as E. coli and S. aureus. In this review, various types of pollutants including organic dyes and natural pollutants are discussed. The treatment methods that are used to purify wastewater with their limitations are highlighted. The distinguishing properties of ZnO are clearly outlined and defined, not to mention the performance of ZnO as a green derived photocatalyst and an antimicrobial agent, as well. Lastly, an overview is given of the challenges and possible further perspectives.

Photocatalytic Material-Microorganism Hybrid System and Its Application—A Review

The photocatalytic material-microorganism hybrid system is an interdisciplinary research field. It has the potential to synthesize various biocompounds by using solar energy, which brings new hope for sustainable green energy development. Many valuable reviews have been published in this field. However, few reviews have comprehensively summarized the combination methods of various photocatalytic materials and microorganisms. In this critical review, we classified the biohybrid designs of photocatalytic materials and microorganisms, and we summarized the advantages and disadvantages of various photocatalytic material/microorganism combination systems. Moreover, we introduced their possible applications, future challenges, and an outlook for future developments.