Visible-light photocatalysis of Ag-doped graphitic carbon nitride for photodegradation of micropollutants in wastewater

Removal of Emerging Contaminants (Endocrine Disruptors) Using a Photocatalyst and Detection by High-Performance Liquid Chromatography (HPLC)

Among several types of emerging contaminants, the endocrine disruptors 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) are particularly notable. These compounds are discharged into sewage systems and subsequently into water bodies, as conventional wastewater treatment processes are unable to effectively eliminate such pollutants. Therefore, the present study aimed to evaluate the possibility of removing the endocrine disruptors 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) from water using the photocatalytic activity of the compound Ag3AsO4. Silver arsenate was synthesized and characterized, the quantification of the hormones E2 and EE2 was achieved by high-performance liquid chromatography with a fluorescence detector, and a validation process and some preliminary tests were performed on the photodegradation of the hormones using the Ag3AsO4 catalyst. Validation was performed, and satisfactory results were achieved: r = 0.9987 (E2), r = 0.9984 (EE2), a detection limit of 5.01 (E2) and 0.51 (EE2), a quantification limit of 15.19 (E2) and 1.54 (EE2), coefficients of variation for precision intraday and interday lower than 10.9725% and 11.3393%, respectively, and a recovery of 100.15% (E2) and 100.31% (EE2). In photodegradation studies, Ag3AsO4 showed different behavior in the presence of light for each hormone. In solution with E2, it reached a removal rate of 35% of the hormone under LED light, acting as a photocatalyst, while with EE2, it reached a removal rate of 96%; both results were obtained after 30 min of exposure to visible light. When this study is compared with other processes and materials, the high efficiency of the Ag3AsO4 photocatalyst in removing E2 and EE2, persistent emerging contaminants, becomes evident. This advancement has significant implications for wastewater treatment, offering a promising solution that can mitigate environmental impacts caused by endocrine disruptors.

Effective removal of carbofuran pesticide in wastewater using silver-doped TiO2 photocatalyst

This study presents effective methods for utilizing the TiO2 photocatalyst in environmental remediation, with a particular focus on the removal of the carbofuran pesticide (CBFP) from wastewater. Silver (Ag) was selected as a potential dopant to improve the optical properties as well as the electron-hole pair separation efficiency of TiO2. Ag-doped TiO2 (Ag-TiO2) effectively decomposed 92.8% CBFP under solar light, which was significantly higher than that of TiO2 (21.3%). Ag-TiO2 also exhibited good reusability for CBFP degradation, with a reduction in removal efficiency of less than 3% after three cycles. In practical applications, Ag-TiO2 successfully degraded 89.3% of CBFP in wastewater and 98.7% in surface water. The findings of this work bring an effective method for removing pesticide pollutants using Ag-TiO2 photocatalyst.

A bifunctional MoS2/SGCN nanocatalyst for the electrochemical detection and degradation of hazardous 4-nitrophenol

Herein, we reported the dual functions of molybdenum disulfide/sulfur-doped graphitic carbon nitride (MoS2/SGCN) composite as a sensing material for electrochemical detection of 4-NP and a catalyst for 4-NP degradation. The MoS2 nanosheet, sulfur-doped graphitic carbon nitride (SGCN) and MoS2/SGCN were characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) spectroscopy and X-ray photoelectron spectroscopy (XPS). Electrochemical characterization of these materials with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) in 1 mM K4[Fe(CN)6]3-/4- show that the composite has the lowest charge transfer resistance and the best electrocatalytic activity. The limit of detection (LOD) and the linear range of 4-nitrophenol at MoS2/SGCN modified glassy carbon electrode (MoS2/SGCN/GCE) were computed as 12.8 nM and 0.1 - 2.6 μM, respectively. Also, the percentage recoveries of 4-NP in spiked tap water samples ranged from 97.8 - 99.1 %. The electroanalysis of 4-NP in the presence of notable interferons shows that the proposed electrochemical sensor features outstanding selectivity toward 4-NP. Additionally, the results of the catalytic degradation of 4-NP at MoS2/SGCN show that the nanocatalyst catalyzed the transformation of 4-NP to 4-aminophenol (4-AP) with a first-order rate constant (k) estimated to be 4.2 ×10-2 s-1. The results of this study confirm that the MoS2/SGCN nanocatalyst is a useful implement for electroanalytical monitoring and catalytic degradation of the hazardous 4-NP in water samples.

Enhanced removal of pesticide micropollutant and bacteria using solar light-assisted Ag-doped TiO2: prospects for environmental and health impacts

Pesticide micropollutants like 4-chlorophenol (4CP) and E. coli bacteria represent a substantial hazard, impacting both the environment and human health. This study delves into the effectiveness of Ag-doped TiO2 (Ag@TiO2) in removing both 4CP and E. coli. Ag@TiO2 has demonstrated remarkable effectiveness in removing 4CP under both solar and visible light conditions, earning degradation efficiencies of 91.3% and 72.8%, respectively. Additionally, it demonstrates outstanding photodegradation efficiency for 4CP (98.8%) at an initial concentration of 1 mg L-1. Moreover, Ag@TiO2 exhibited substantially higher removal performance for 4CP (81.6%) compared to TiO2 (27.6%) in wastewater. Analysis of the radicals present during the photodegradation process revealed that ·O2- primarily drives the decomposition of 4CP, with h+ and ·OH also playing significant roles in the oxidation reactions of the pollutant. Interestingly, even under dark conditions, Ag@TiO2 exhibited the capability to eliminate approximately 20% of E. coli, a percentage that increased to over 96% under solar light. In addition, the prospects for environmental and health impacts of utilizing Ag@TiO2 for pesticide micropollutant removal and bacteria were discussed.

Mitigation of caffeine micropollutants in wastewater through Ag-doped ZnO photocatalyst: mechanism and environmental impacts

Micropollutants, such as caffeine (M-CF), pose a significant threat to ecosystems and human health through water and food sources. The utilization of metal oxide-based photocatalysts has proven to be an effective treatment method for the removal of organic pollutants. This study explores the efficacy of Ag-doped ZnO (Ag/ZnO) for removing M-CF from wastewater. The characterization of Ag/ZnO underscores the crucial role of band gap energy in the photocatalytic degradation process. This parameter influences the separation of electrons and holes (e-/h+) and the generation of reactive radicals. Under solar light, Ag/ZnO demonstrated markedly superior photocatalytic activity, achieving an impressive degradation efficiency of approximately 93.4%, in stark contrast to the 53.2% occurred by ZnO. Moreover, Ag/ZnO exhibited a remarkable degradation efficiency of M-CF in wastewater, reaching 83.5%. A key advantage of Ag/ZnO lies in its potential for recovery and reuse in subsequent treatments, contributing to a reduction in operational costs for industrial wastewater treatment. Impressively, even after five cycles, Ag/ZnO maintained a noteworthy photodegradation rate of M-CF at 78.6%. These results strongly suggest that Ag/ZnO presents a promising solution for the removal of micropollutants in wastewater, with potential scalability for industrial and large-scale applications.

Improved photocatalytic oxidation of micropollutant in wastewater by solar light: assisted palladium-doped graphitic carbon nitride

The escalating global industrial expansion has led to the extensive release of organic compounds into water bodies, resulting in substantial pollution and posing severe threats to both human health and the ecosystem. Among common micropollutants, bisphenol A (MP-BA) has emerged as a significant endocrine-disrupting chemical with potential adverse effects on human health and the environment. This study aims to develop an efficient photocatalyst, specifically by incorporating palladium-doped graphitic carbon nitride (Pd@GCN), to eliminate MP-BA pollutants present in industrial wastewater. The examination of optical properties and photoluminescence indicates that incorporating Pd into GCN enhances the visible light absorption spectra, which extends beyond 570 nm, and accelerates the separation rate of electron-hole pairs. The photocatalytic degradation efficiency of MP-BA increases from 81.7 to 98.8% as the solution pH rises from 5.0 to 9.0. Moreover, Pd@GCN significantly improves the removal rate of MP-BA in wastewater samples, reaching an impressive 92.8% after 60 min of exposure to solar light. Furthermore, the Pd@GCN photocatalyst exhibits notable reusability over six cycles of MP-BA degradation, indicating its promising potential for the treatment of organic pollutants in wastewater under solar light conditions.

Ultratrace Aromatic Anhydride Dopant as Intermediate Island to Promote Charge Transfer of Graphitic Carbon Nitride for Enhancing the Photocatalytic Degradation of Rhodamine B

In this work, 0.75 wt ‰ 2,3-pyridinedicarboxylic anhydride (PDA) as a novel dopant was utilized to obtain modified graphitic carbon nitride with ultratrace doping (3MCN-PDA3) by facile thermal polymerization. Characterization of the microstructure, surface state, and porosity properties of the samples indicated that 3MCN-PDA3 has a thinner sheet-like, larger-scale, and tighter lamellar stacking structure than that of pristine graphitic carbon nitride (3MCN). Based on photo/electrochemical analysis, the PDA dopant formed an extended coplanar conjugated system by anhydride-amine thermal condensation with heptazine rings, and the channels of amide covalent bonds and superconjugation of the solitary pair of electrons of the nitrogen atoms of PDA synergistically promoted the charge transport performance of 3MCN-PDA3. Under visible light, the photodegradation efficiency of Rhodamine B (RhB) over 3MCN-PDA3 reached 92.4% in 60 min and realized almost entire removal in 200 min (99.2%), 1.43 times that of 3MCN. Furthermore, the experimental results and generalized density theory calculations confirmed that PDA acts as an intermediate molecular island and constructs an efficient carrier transfer pathway between different heptazine units. The results indicate that PDA is a promising candidate to enhance the charge transfer performance through ultratrace doping in the large-scale preparation and application of the graphitic carbon nitride photocatalyst.

Synthesis of solar-driven Cu-doped graphitic carbon nitride photocatalyst for enhanced removal of caffeine in wastewater

Caffeine (CaF), a widely consumed compound, has been associated with various harmful effects on human health, including metabolic, cardiovascular disease, and reproductive disorders. Moreover, it poses a signifincant threat to organisms and aquatic ecosystems, leading to water pollution concerns. Therefore, the removal of CaF from wastewater is crucial for mitigating water pollution and minimizing its detrimental impacts on both humans and the environment. In this study, a solar-driven Cu-doped graphitic carbon nitride (Cu/CN) photocatalyst was synthesized and evaluated for its effectiveness in oxidizing CaF in wastewater. The Cu/CN photocatalyst, with a low band gap energy of 2.58eV, exhibited superior performance in degrading CaF compared to pure graphitic carbon nitride (CN). Under solar light irradiation, CuCN achieved a remarkable CaF degradation efficiency of 98.7% CaF, surpassing CN's efficiency of 74.5% by 24.2%. The synthesized Cu/CN photocatalyst demonstrated excellent removal capability, achieving a removal rate of over 88% for CaF in wastewater. Moreover, the reusability test showed that Cu/CN could be successfully reused up to five cycles maintaining a high removal efficiency of 74% for CaF in the fifth cycle. Additionally, the study elucidated the oxidation mechanism of CaF using solar-driven Cu/CN photocatalyst and highlighted the environmental implications of the process.

Graphitic carbon nitride metal-free photocatalyst for the simultaneous removal of emerging pharmaceutical pollutants in wastewater

The presence of pharmaceutical pollutants in water has emerged as a significant public health concern due to their potential adverse impacts, including the development of antibiotic resistance. Consequently, advanced oxidation processes based on photocatalysis have garnered considerable attention for treating pharmaceutical contaminants in wastewater. In this study, graphitic carbon nitride (g-CN), a metal-free photocatalyst, was synthesized by the polymerization of melamine and assessed as a potential candidate for the photodegradation of acetaminophen (AP) and carbamazepine (CZ) in wastewater. Under alkaline conditions, g-CN demonstrated high removal efficiencies of 98.6% and 89.5% for AP and CZ, respectively. The relationships between degradation efficiency and catalyst dosage, initial pharmaceutical concentration, and photodegradation kinetics were investigated. Increasing the catalyst dose facilitated the removal of antibiotic contaminants, with an optimum catalyst dose of 0.1 g, achieving a photodegradation efficiency of 90.2% and 82.7% for AP and CZ, respectively. The synthesized photocatalyst removed over 98% of AP (1 mg/L) within 120 min, with a rate constant of 0.0321 min-1, 2.14 times faster than that of CZ. Quenching experiments revealed that g-CN was active under solar light and generated highly reactive oxidants such as hydroxyl (•OH) and superoxide (•O2-). The reuse test confirmed the good stability of g-CN for treating pharmaceuticals during three repeated cycles. Finally, the photodegradation mechanism and environmental impacts were discussed. This study presents a promising approach for treating and mitigating pharmaceutical contaminants in wastewater.

Highly photoactive novel NiS/BiOI nanocomposite photocatalyst towards efficient visible light organic pollutant degradation and carcinogenetic Cr (VI) reduction for environmental remediation

Heterojunction engineering in catalyst structures is a promising approach for solving the main restriction of the narrow photoabsorption range and quick recombination of photogenerated charge carriers in the photocatalysts. Herein, a simple, eco-friendly, non-toxic, and novel Z-scheme heterojunction of nanoflower-like NiS/BiOI was systematically designed using the low-temperature solvothermal and precipitation methods. The physicochemical and photo-electrochemical properties of the as-synthesized nanomaterials were characterized using XRD, FESEM, FT-IR, XPS, BET, UV-vis, PL, and EIS. NiS/BiOI nanomaterials exhibited a wide photoabsorption range (200-1000 nm), a narrow bandgap energy (1.76 eV), a large surface area (35.82 m² g^-1), and a low charge carrier recombination rate because of the synergistic effects of the NiS and BiOI photocatalysts, which could be the basis for superior photocatalytic efficiency. Particularly, the optimal 40% NiS/BiOI nanocomposite exhibited better stability and efficiency than the pure NiS and BiOI. The maximum degradation efficiency of rhodamine B (RhB) was 99.8% after 200 min, tetracycline (TC) was 96.3% after 140 min, and the photoreduction of Cr(VI) was 92.8% after 180 min rather than the pure NiS and BiOI under visible light irradiation. The constant rate (k) of RhB was approximately 10 and 4, TC was 12 and 4, and Cr(VI) was 10 and 8 times that of pristine NiS and BiOI, respectively. Radical trapping experiments and Tauc plot analysis proposed the design of the plausible Z-scheme reaction mechanism between NiS and BiOI, which has a crucial role in the rate of transportation and separation of electron/hole pairs. This investigation provides a venue for the design of a photoactive NiS-based nanocomposite for environmental remediation.

Single-Step Synthesis of Graphitic Carbon Nitride Nanomaterials by Directly Calcining the Mixture of Urea and Thiourea: Application for Rhodamine B (RhB) Dye Degradation

Recently, polymeric graphitic carbon nitride (g-C₃N₄) has been explored as a potential catalytic material for the removal of organic pollutants in wastewater. In this work, graphitic carbon nitride (g-C₃N₄) photocatalysts were synthesized using mixtures of low-cost, environment-friendly urea and thiourea as precursors by varying calcination temperatures ranging from 500 to 650 °C for 3 h in an air medium. Different analytical methods were used to characterize prepared g-C₃N₄ samples. The effects of different calcination temperatures on the structural, morphological, optical, and physiochemical properties of g-C₃N₄ photocatalysts were investigated. The results showed that rhodamine B (RhB) dye removal efficiency of g-C₃N₄ prepared at a calcination temperature of 600 °C exhibited 94.83% within 180 min visible LED light irradiation. Photocatalytic activity of g-C₃N₄ was enhanced by calcination at higher temperatures, possibly by increasing crystallinity that ameliorated the separation of photoinduced charge carriers. Thus, controlling the type of precursors and calcination temperatures has a great impact on the photocatalytic performance of g-C₃N₄ towards the photodegradation of RhB dye. This investigation provides useful information about the synthesis of novel polymeric g-C₃N₄ photocatalysts using a mixture of two different environmentally benign precursors at high calcination temperatures for the photodegradation of organic pollutants.