Prevalence and implications of microplastics in potable water system: An update

A critical review of microplastics in aquatic ecosystems: Degradation mechanisms and removing strategies

Plastic waste discarded into aquatic environments gradually degrades into smaller fragments, known as microplastics (MPs), which range in size from 0.05 to 5 mm. The ubiquity of MPs poses a significant threat to aquatic ecosystems and, by extension, human health, as these particles are ingested by various marine organisms including zooplankton, crustaceans, and fish, eventually entering the human food chain. This contamination threatens the entire ecological balance, encompassing food safety and the health of aquatic systems. Consequently, developing effective MP removal technologies has emerged as a critical area of research. Here, we summarize the mechanisms and recently reported strategies for removing MPs from aquatic ecosystems. Strategies combining physical and chemical pretreatments with microbial degradation have shown promise in decomposing MPs. Microorganisms such as bacteria, fungi, algae, and specific enzymes are being leveraged in MP remediation efforts. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies, with nano-enabled technologies demonstrating substantial potential to enhance MP removal efficiency. This review aims to stimulate further innovation in effective MP removal methods, promoting environmental and social well-being.

Global prevalence of microplastics in tap water systems: Abundance, characteristics, drivers and knowledge gaps

Tap water is a main route for human direct exposure to microplastics (MPs). This study recompiled baseline data from 34 countries to assess the current status and drivers of MP contamination in global tap water systems (TWS). It was shown that MPs were detected in 87 % of 1148 samples, suggesting the widespread occurrence of MPs in TWS. The detected concentrations of MPs spanned seven orders of magnitude and followed the linearized log-normal distribution (MSE = 0.035, R2 = 0.965), with cumulative concentrations at 5th, 50th and 95th percentiles of 0.028, 4.491 and 728.105 items/L, respectively. The morphological characteristics were further investigated, indicating that particles smaller than 50 μm dominated in global TWS, with fragment, polyester and transparent as the most common shape, composition and color of MPs, respectively. Subsequently, the SHapley Additive exPlanations (SHAP) algorithm was implemented to quantify the importance of variables affecting the MP abundance in global TWS, showing that the lower particle size limit was the most important variables. Subgroup analysis revealed that the concentration of MPs counted at the size limit of 1 μm was >20 times higher than that above 1 μm. Ultimately, current knowledge gaps and future research needs were elucidated.

Continuous generation and release of microplastics and nanoplastics from polystyrene by plastic-degrading marine bacteria

Plastic waste released into the environments breaks down into microplastics due to weathering, ultraviolet (UV) radiation, mechanical abrasion, and animal grazing. However, little is known about the plastic fragmentation mediated by microbial degradation. Marine plastic-degrading bacteria may have a double-edged effect in removing plastics. In this study, two ubiquitous marine bacteria, Alcanivorax xenomutans and Halomonas titanicae, were confirmed to degrade polystyrene (PS) and lead to microplastic and nanoplastic generation. Biodegradation occurred during bacterial growth with PS as the sole energy source, and the formation of carboxyl and carboxylic acid groups, decreased heat resistance, generation of PS metabolic intermediates in cultures, and plastic weight loss were observed. The generation of microplastics was dynamic alongside PS biodegradation. The size of the released microplastics gradually changed from microsized plastics on the first day (1344 nm and 1480 nm, respectively) to nanoplastics on the 30th day (614 nm and 496 nm, respectively) by the two tested strains. The peak release from PS films reached 6.29 × 106 particles/L and 7.64 × 106 particles/L from degradation by A. xenomutans (Day 10) and H. titanicae (Day 5), respectively. Quantification revealed that 1.3% and 1.9% of PS was retained in the form of micro- and nanoplastics, while 4.5% and 1.9% were mineralized by A. xenomutans and H. titanicae at the end of incubation, respectively. This highlights the negative effects of microbial degradation, which results in the continuous release of numerous microplastics, especially nanoplastics, as a notable secondary pollution into marine ecosystems. Their fates in the vast aquatic system and their impact on marine lives are noted for further study.

Application of advanced oxidation processes for the removal of micro/nanoplastics from water: A review

Micro/nanoplastics (MNPs) have been increasingly found in environments, food, and organisms, arousing wide public concerns. MNPs may enter food chains through water, posing a threat to human health. Therefore, efficient and environmentally friendly technologies are needed to remove MNPs from contaminated aqueous environments. Advanced oxidation processes (AOPs) produce a vast amount of active species, such as hydroxyl radicals (·OH), known for their strong oxidation capacity. As a result, an increasing number of researchers have focused on using AOPs to decompose and remove MNPs from water. This review summarizes the progress in researches on the removal of MNPs from water by AOPs, including ultraviolet photolysis, ozone oxidation, photocatalysis, Fenton oxidation, electrocatalysis, persulfate oxidation, and plasma oxidation, etc. The removal efficiencies of these AOPs for MNPs in water and the influencing factors are comprehensively analyzed, meanwhile, the oxidation mechanisms and reaction pathways are also discussed in detail. Most AOPs can achieve the degradation of MNPs, mainly manifest as the decrease of particle size and the increase of mass loss, but the mineralization rate is low, thus requiring further optimization for improved performance. Investigating various AOPs is crucial for achieving the complete decomposition of MNPs in water. AOPs will undoubtedly play a vital role in the future for the removal of MNPs from water.

Foodborne and airborne polyethersulfone nanoplastics respectively induce liver and lung injury in mice: Comparison with microplastics

Micro/nanoplastics (MNP) are ubiquitous in the environment and multiple living organisms. The toxicity of some common types of MNP, e.g., polyethersulfone (PES) MNP, remains poorly understood. Multi-omics approaches were used in this study to determine the effects of foodborne and airborne PES MNP on liver and lung, respectively. Foodborne MNP were capable of inducing gut microbial dysbiosis, gut and serum metabolic disruption, and liver transcriptomic dysregulation, and affecting serum antioxidant activity and liver function, resulting in liver injury. As for the airborne MNP, they were found to induce nasal and lung microbial dysbiosis, serum and lung metabolic disruption, and liver transcriptome disturbance, and cause disrupted serum antioxidant activity and lung injury. Foodborne and airborne PES NP were found to respectively induce greater liver and lung toxicity than MP, which could be associated with the differences between NP and MP exposures. The relevant results suggest that foodborne PES MNP could disrupt the "gut microbiota-gut-liver" axis and induce hepatic injury, while airborne PES MNP could affect the "airborne microbiota-lung" axis and cause lung injury. The findings could benefit the diagnoses of liver and lung injury respectively induced by foodborne and airborne PES MNP, as well as the proper use of PES in human living environment.

Characterization and removal efficiencies of microplastics discharged from sewage treatment plants in Southeast Spain

Microplastics (MPs) are ubiquitous pollutants that can effectively harm different ecosystems. The information on the relative contribution of wastewater treatment plants (WWTPs) to the surrounding environment is important, in order to understand ecological health risks and implement measures to reduce their presence. This focus article presents a quantitative assessment on the relative concentration and types of MPs delivered from four WWTPs located at the Southeast of Spain. Samples from WWTPs were collected throughout a four-year period, comprising more than 1,200 L of analyzed wastewater and 3,215 microparticles isolated. Density extraction with 1.08 g/mL NaCl salt solution was systematically used as the main separation method, in a simple and reliable manner, and repeat extraction cycles did not play any significant impact on the study outcomes. The four WWTPs had removal efficiencies between 64.3% and 89.2% after primary, secondary, and tertiary treatment phases, without diurnal or daily variations. Advanced treatment methods displayed a lower removal rate for fibers than for particulate MPs. The abundance of MPs was always higher and with a lower mean size in wastewater samples collected in Autumn than for the rest of seasons. MPs dumped from WWTPs in large quantities into the environment are meant to be regarded as an important point source for aquatic and terrestrial environments.

The Behavior of Polymeric Pipes in Drinking Water Distribution System-Comparison with Other Pipe Materials

The inner walls of the drinking water distribution system (DWDS) are expected to be clean to ensure a safe quality of drinking water. Complex physical, chemical, and biological processes take place when water comes into contact with the pipe surface. This paper describes the impact of leaching different compounds from the water supply pipes into drinking water and subsequent risks. Among these compounds, there are heavy metals. It is necessary to prevent these metals from getting into the DWDS. Those compounds are susceptible to impacting the quality of the water delivered to the population either by leaching dangerous chemicals into water or by enhancing the development of microorganism growth on the pipe surface. The corrosion process of different pipe materials, scale formation mechanisms, and the impact of bacteria formed in corrosion layers are discussed. Water treatment processes and the pipe materials also affect the water composition. Pipe materials act differently in the flowing and stagnation conditions. Moreover, they age differently (e.g., metal-based pipes are subjected to corrosion while polymer-based pipes have a decreased mechanical resistance) and are susceptible to enhanced bacterial film formation. Water distribution pipes are a dynamic environment, therefore, the models that are used must consider the changes that occur over time. Mathematical modeling of the leaching process is complex and includes the description of corrosion development over time, correlated with a model for the biofilm formation and the disinfectants-corrosion products and disinfectants-biofilm interactions. The models used for these processes range from simple longitudinal dispersion models to Monte Carlo simulations and 3D modeling. This review helps to clarify what are the possible sources of compounds responsible for drinking water quality degradation. Additionally, it gives guidance on the measures that are needed to maintain stable and safe drinking water quality.

Occurrence and size distribution study of microplastics in household water from different cities in continental Spain and the Canary Islands

The purpose of this study was to investigate the occurrence of microplastics (MPs) in drinking water in Spain by comparing tap water from different locations using common sampling and identification procedures. We sampled tap water from 24 points in 8 different locations from continental Spain and the Canary Islands by means of 25 μm opening size steel filters coupled to household connections. All particles were measured and spectroscopically characterized including not only MPs but also particles consisting of natural materials with evidence of industrial processing, such as dyed natural fibres, referred insofar as artificial particles (APs). The average concentration of MPs was 12.5 ± 4.9 MPs/m³ and that of anthropogenic particles 32.2 ± 12.5 APs/m³. The main synthetic polymers detected were polyamide, polyester, and polypropylene, with lower counts of other polymers including the biopolymer poly(lactic acid). Particle size and mass distributions were parameterized by means of power law distributions, which allowed performing estimations of the concentration of smaller particles provided the same scaling parameter of the power law applies. The calculated total mass concentration of the identified MPs was 45.5 ng/L. The observed size distribution of MPs allowed an estimation for the concentration of nanoplastics (< 1 µm) well below the ng/L range; higher concentrations are not consistent with scale invariant fractal fragmentation. Our findings showed that MPs in the drinking water sampled in this work do not represent a significant way of exposure to MPs and would probably pose a negligible risk for human health.

Advances in the Utilization of Zebrafish for Assessing and Understanding the Mechanisms of Nano-/Microparticles Toxicity in Water

A large amount of nano-/microparticles (MNPs) are released into water, not only causing severe water pollution, but also negatively affecting organisms. Therefore, it is crucial to evaluate MNP toxicity and mechanisms in water. There is a significant degree of similarity between the genes, the central nervous system, the liver, the kidney, and the intestines of zebrafish and the human body. It has been shown that zebrafish are exceptionally suitable for evaluating the toxicity and action mechanisms of MNPs in water on reproduction, the central nervous system, and metabolism. Providing ideas and methods for studying MNP toxicity, this article discusses the toxicity and mechanisms of MNPs from zebrafish.