Synergistic enhancement of redox pairs and functional groups for the removal of phenolic organic pollutants by activated PMS using silica-composited biochar: Mechanism and environmental toxicity assessment

Advances of carbon-based materials for activating peracetic acid in advanced oxidation processes: A review

In recent years, the peracetic acid (PAA)-based advanced oxidation process (AOPs) has garnered significant attention in the field of water treatment due to rapid response time and environmentally-friendliness. The activation of PAA systems by diverse carbon-based materials plays a crucial role in addressing emerging environmental contaminants, including various types, structures, and modified forms of carbon materials. However, the structural characteristics and structure-activity relationship of carbon-based materials in the activation of PAA are intricate, while the degradation pathways and dominant active species exhibit diversity. Therefore, it is imperative to elucidate the developmental process of the carbon-based materials/PAA system through resource integration and logical categorization, thereby indicating potential avenues for future research. The present paper comprehensively reviews the structural characteristics and action mechanism of carbon-based materials in PAA system, while also analyzing the development, properties, and activation mechanism of heteroatom-doped carbon-based materials in this system. In conclusion, this study has effectively organized the resources pertaining to prominent research direction of comprehensive remediation of environmental water pollution, thereby elucidating the underlying logic and thought process. Consequently, it establishes robust theoretical foundation for future investigations and applications involving carbon-based materials/PAA system.

Synchronous reinforcement azo dyes decolorization and anaerobic granular sludge stability by Fe, N co-modified biochar: Enhancement based on extracellular electron transfer

Anaerobic digestion (AD) treatment of azo dyes wastewater often suffers from low decolorization efficiency and poor stability of anaerobic granular sludge (AnGS). In this study, iron and nitrogen co-modified biochar (FNC) was synthesized based on the secondary calcination method, and the feasibility of this material for enhanced AD treatment of azo dye wastewater and its mechanism were investigated. FNC not only formed richer conducting functional groups, but also generated Fe2+/Fe3+ redox pairs. The decolorization efficiency of Congo red and AD properties (e.g., methane production) were enhanced by FNC. After adding FNC, the content of extracellular polymeric substances (EPS) and the ratio of proteins remained stable under the impact of Congo red, which greatly protected the internal microbial community. This was mainly contributed to the excellent electrochemical properties of FNC, which strengthened the microbial extracellular electron transfer and realized the coupled mechanism of action: On the one hand, an electron transfer bridge between decolorizing bacteria and dyes was constructed to achieve rapid decolorization of azo dyes and mitigate the impact on methanogenic bacteria; On the other hand, the stability of AnGS was enhanced based on enhanced extracellular polymeric substances secretion, microbial community and direct interspecies electron transfer (DIET) process. This study provides a new idea for enhanced AD treatment of azo dyes wastewater.

The surface functional groups-driven fast and catalytic degradation of naproxen on sludge biochar enhanced by citric acid

In this work, a sludge biochar (CA-SBC-300) with efficient activation of peroxymonosulfate (PMS) was prepared by citric acid modification. CA-SBC-300 achieved efficient degradation of naproxen (NPX) (95.5%) within 10 min by activating PMS. This system was highly resilient to common disruptive factors such as inorganic anions, humic acid (HA) and solution pH. The results of XPS and Raman showed that the content of oxygenated functional groups (OFGs) and the degree of defects on the sludge biochar increased after citric acid modification, which may be an important reason for the enhanced catalytic performance of SBC. In the CA-SBC-300/PMS system, 1O2 and O2•- made the main contributions to the degradation of NPX. XPS analysis and DFT calculations demonstrated that C=O/C-O and pyridine N on CA-SBC-300 were the crucial active sites for PMS activation. According to the results of UPLC-MS analysis, three possible pathways for NPX degradation were inferred. This study provided a feasible strategy for sludge resource utilization combined with efficient catalytic degradation of toxic organic contaminants in wastewater.

Behaviour and mechanics of phenolic sorption by novel bio-based graphene derivatives as adsorbents

Phenolic compounds, notorious for their environmental and health hazards, demand efficient removal from wastewater. Our research leads in synthesizing bio-based graphene derivatives from biomass-derived lignin, such as graphene oxide (bGO) and reduced graphene oxide (brGO), and these materials show promise in effectively removing hydrophobic pollutants like phenol and tannic acid. Hence, this study investigated the mechanical and dynamical aspects of their sorptions by bGO and brGO. Both adsorbents demonstrated a comparable adsorption pattern, with enhanced efficiency observed at higher adsorbent dosage, prolonged contact time, neutralized pH solutions, and elevated temperatures. Of note, phenol is removed at a much greater rate (>94%) than tannic acid (>84%) by both adsorbents at a dosage of 180 mg L-1, pH 6.5, 900 min, and 25 °C. The Freundlich model provided the best fit for the isotherm data of both phenol (R2 = 0.99) and tannic acid (R2 = 0.98), while the pseudo-second-order model effectively described the adsorption kinetics of phenol (R2 = 0.99) and tannic acid (R2 = 0.99). The determined activation energy exceeds 5.88 kJ mol-1, affirming the prevalence of physisorption as the dominant mechanism in the adsorption process. Thermodynamic analysis confirmed that the adsorption process is endothermic (ΔH) and occurs spontaneously (ΔG), indicating a random (ΔS) nature. However, the percentage removal plunged considerably after five consecutive adsorption-desorption cycles, attributed to the alterations of active sites on bGO and brGO.

Analysis of Ag-DP25/PET plasmonic nano-composites as a visible-light photocatalyst for wastewater treatment: Experimental/theoretical studies, and the DFT-MB degradation mechanism

The development of polymeric-composites Agx%DP25-PET (x = 0,1,2,3) may significantly boost the potential application of Agx%DP25 (x = 0,1,2,3) photocatalytic powders. Producing large-scale nano-composites with hybrid-surfaces, that are also flexible materials and easy to employ in a variety of environments. A set of photocatalytic nan-composites embedded with the polymeric binder poly (acrylonitrile-co-butadiene)-dicarboxy terminated (C7H9N) were performed and evaluated for wastewater treatment applications. The results reveal that the flexible polymeric composites (Agx%DP25-PET, x = 0,1,2,3) have photocatalytic activity in aqua media to degrade methylene blue (MB) under visible-light. The addition of C7H9N to immobilize photocatalytic powders on the PET surface reduces photo-generated electron-hole recombination. The materials were characterized by HR-TEM, SEM/EDX, XRD, FT-IR, UV-Vis DRS and PL. The Agx%DP25-PET (x = 0,1,2,3) photocatalytic reactions exhibited productive discoloration/degradation rates, in both aerobic (AE) and anaerobic (AN) environments. The superior photodegradation of Ag2%DP25-PET was attributed to a combination of two effects: LSPR (localized surface plasmon resonance) and Ag-TiO2/environment affinities. The findings of molecular dynamics (MD) simulation and Fukui Function (FF) based on density functional theory (DFT) provide significant insight into the photocatalytic requirements for MB discoloration/degradation. The experimental/theoretical analysis aimed to offer an in-depth understanding of medium/surface interactions on decorated TiO2 materials, as well as how these interactions affect overall degradation behavior.

Attuning doped ZnO-based composites for an effective light-driven mineralization of pharmaceuticals via PMS activation

Water treatment technologies need to go beyond the current control of organic contaminants and ensure access to potable water. However, existing methods are still costly and often inadequate. In this context, novel catalysts that improve the mineralization degree of a wider range of pharmaceuticals through more benign and less consuming methodologies are highly sought after. ZnO, especially when doped, is a well-known semiconductor that also excels in the photocatalytic removal of persistent organic pollutants. In this study, we investigated the effect of doping ZnO nanoparticles with either copper, gallium or indium on the structure, morphology, photophysical properties and photocatalytic mineralization of pharmaceuticals. Their architecture was further improved through the fabrication of composites, pairing the best performing doped ZnO with either BaFe12O19 or nickel nanoparticles. Their suitability was tested on a complex 60-ppm multi-pollutant solution (tetracycline, levofloxacin and lansoprazole). The activation strategy combined photocatalysis with peroxymonosulfate (PMS) as an environmentally friendly source of highly oxidative sulfate radicals. The alliance of doped ZnO and BaFe12O19 was particularly successful, resulting in magnetic microcroquette-shaped composites with excellent inter-component synergy. In fact, indium outperformed the other proposed metal dopants, exceeding 97% mineralization after 1 h and achieving complete elimination after 3 h. All composites excelled in terms of reusability, with no catalytic loss after 10 consecutive cycles and minimal leakage of metal ions, highlighting their applicability in water remediation.