Identification and refinement of a peptide affinity ligand with unique specificity for a monoclonal anti-tenascin-C antibody by screening of a phage display library

Identification of a broad-spectrum high-affinity peptide ligand for the purification of spike proteins

Since the outbreak of coronavirus disease 2019, the global demand for vaccines has increased rapidly to prevent infection and protect high-risk populations. However, identifying viral mutations poses an additional challenge for chromatographic purification of vaccines and subunit vaccines. In this study, a new affinity peptide model, X1VX2GLNX3WX4RYSK, was established, and a library of 612 peptides was generated for ligand screening. Based on a multistep strategy of ligand screening, 18 candidate peptides were obtained. The top ranking peptide, LP14 (YVYGLNIWLRYSK), and two other representative peptides, LP02 and LP06, with lower rankings were compared via molecular dynamics simulation. The results revealed that peptide binding to the receptor binding domain (RBD) was driven by hydrophobic interactions and the key residues involved in the binding were identified. Surface plasmon resonance analysis further confirmed that LP14 had the highest affinity for the wild RBD (Kd=0.520 μmol/L), and viral mutation had little influence on the affinity of LP14, demonstrating its great potential as a broad-spectrum ligand for RBD purification. Finally, chromatographic performance of LP14-coupled gel-packed column verified that both wild and omicron RBDs could be purified and were eluted by 0.1 mol/L Gly-HCl buffer (pH 3.0). This research identified a broad-spectrum peptide for RBD purification based on rational design and demonstrated its potential application in the purification of RBDs from complex feedstock.

Clinical advances in TNC delivery vectors and their conjugate agents

Tenascin C (TNC), a glycoprotein that is abundant in the tumor extracellular matrix (ECM), is strongly overexpressed in tumor tissues but virtually undetectable in most normal tissues. Many TNC antibodies, peptides, aptamers, and nanobodies have been investigated as delivery vectors, including 20A1, α-A2, α-A3, α-IIIB, α-D, BC-2, BC-4 BC-8, 81C6, ch81C6, F16, FHK, Ft, Ft-NP, G11, G11-iRGD, GBI-10, 19H12, J1/TN1, J1/TN2, J1/TN3, J1/TN4, J1/TN5, NJT3, NJT4, NJT6, P12, PL1, PL3, R6N, SMART, ST2146, ST2485, TN11, TN12, TNFnA1A2-Fc, TNfnA1D-Fc, TNfnBD-Fc, TNFnCD-Fc, TNfnD6-Fc, TNfn78-Fc, TTA1, TTA1.1, and TTA1.2. In particular, BC-2, BC-4, 81C6, ch81C6, F16, FHK, G11, PL1, PL3, R6N, ST2146, TN11, and TN12 have been tested in human tissues. G11-iRGD and simultaneous multiple aptamers and arginine-glycine-aspartic acid (RGD) targeting (SMART) may be assessed in clinical trials because G11, iRGD and AS1411 (SMART components) are already in clinical trials. Many TNC-conjugate agents, including antibody-drug conjugates (ADCs), antibody fragment-drug conjugates (FDCs), immune-stimulating antibody conjugates (ISACs), and radionuclide-drug conjugates (RDCs), have been investigated in preclinical and clinical trials. RDCs investigated in clinical trials include 111In-DTPA-BC-2, 131I-BC-2, 131I-BC-4, 90Y-BC4, 131I81C6, 131I-ch81C6, 211At-ch81C6, F16124I, 131I-tenatumomab, ST2146biot, FDC 131I-F16S1PF(ab')2, and ISAC F16IL2. ADCs (including FHK-SSL-Nav, FHK-NB-DOX, Ft-NP-PTX, and F16*-MMAE) and ISACs (IL12-R6N and 125I-G11-IL2) may enter clinical trials because they contain components of marketed treatments or agents that were investigated in previous clinical studies. This comprehensive review presents historical perspectives on clinical advances in TNC-conjugate agents to provide timely information to facilitate tumor-targeting drug development using TNC.

Immunoaffinity Chromatography: Concepts and Applications

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. Immunoaffinity chromatography is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimization of critical experimental parameters such as (a) the biological affinity pair, (b) the matrix support, (c) the immobilization coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in immunoaffinity chromatography and also provides specific examples of their potential applications.

Reversible cyclic peptide libraries for the discovery of affinity ligands

A novel strategy is presented for the identification of cyclic peptide ligands from combinatorial libraries of reversible cyclic depsipeptides. A method for the solid-phase synthesis of individual cyclic depsipeptides and combinatorial libraries of these compounds is proposed, which employs lactic acid (Lact) and the dipeptide ester (Nα-Ac)-Ser(Ala)- as linkers for dilactonization. Upon alkaline treatment of the beads selected by screening a model library, the cyclic depsipeptides are linearized and released from the solid support to the liquid phase, to be sequenced via single-step tandem mass spectrometry (MS/MS). The protocol presented for library synthesis provides for wide structural diversity. Two model sequences, VVWVVK and AAWAAR, were chosen to present different structural examples for depsipeptide libraries and demonstrate the process of sequence determination by mass spectrometry. Further, a case study using the IgG binding cyclic depsipeptide cyclo[(Nα-Ac)-S(A)-RWHYFK-Lact-E] is presented to demonstrate the process of library screening and sequence determination on the selected beads. Finally, a method is shown for synthesis of the irreversible cyclic peptide corresponding to the proposed depsipeptide structure, to make the ligand stable to the aqueous acid and alkaline conditions encountered in affinity chromatographic applications. The cyclic peptide ligand was synthesized on a poly(methacrylate) resin and used for chromatographic binding of the target IgG.

Selection and characterization of tenascin C targeting peptide

Since tenascin C is a factor expressed highly in the tumor-associated matrix, it would be a desirable first step for targeting the tumor-specific microenvironment. In fact, a high level of tenascin C expression has been reported in most solid tumors, including lung cancer, colon cancer and glioblastoma. Therefore, the targeted binding of tenascin C in tumor stroma would inhibit tumor metastasis by modulating cancer cell growth and migration. We isolated a peptide that bound to tenascin C by phage display peptide library selection, and the selected peptide specifically recognized tenascin C protein in xenograft mouse tissue. We also observed exclusive staining of tenascin C by the selected peptide in tumor patient tissues. Moreover, the peptide reduced tenascin C-induced cell rounding and migration. We propose that the tenascin C targeting peptide may be useful as a specific anti-cancer diagnostic and therapeutic tool for most human solid tumors.

Immunoaffinity chromatography

Antibody-based separation methods, such as immunoaffinity chromatography (IAC), are powerful purification and isolation techniques. Antibodies isolated using these techniques have proven highly efficient in applications ranging from clinical diagnostics to environmental monitoring. IAC is an efficient antibody separation method which exploits the binding efficiency of a ligand to an antibody. Essential to the successful design of any IAC platform is the optimisation of critical experimental parameters such as: (a) the biological affinity pair, (b) the matrix support, (c) the immobilisation coupling chemistry, and (d) the effective elution conditions. These elements and the practicalities of their use are discussed in detail in this review. At the core of all IAC platforms is the high-affinity interactions between antibodies and their related ligands; hence, this review entails a brief introduction to the generation of antibodies for use in IAC and also provides specific examples of their potential applications.

Approaches to high-performance preparative chromatography of proteins

Preparative liquid chromatography is widely used for the purification of chemical and biological substances. Different from high-performance liquid chromatography for the analysis of many different components at minimized sample loading, high-performance preparative chromatography is of much larger scale and should be of high resolution and high capacity at high operation speed and low to moderate pressure drop. There are various approaches to this end. For biochemical engineers, the traditional way is to model and optimize a purification process to make it exert its maximum capability. For high-performance separations, however, we need to improve chromatographic technology itself. We herein discuss four approaches in this review, mainly based on the recent studies in our group. The first is the development of high-performance matrices, because packing material is the central component of chromatography. Progress in the fabrication of superporous materials in both beaded and monolithic forms are reviewed. The second topic is the discovery and design of affinity ligands for proteins. In most chromatographic methods, proteins are separated based on their interactions with the ligands attached to the surface of porous media. A target-specific ligand can offer selective purification of desired proteins. Third, electrochromatography is discussed. An electric field applied to a chromatographic column can induce additional separation mechanisms besides chromatography, and result in electrokinetic transport of protein molecules and/or the fluid inside pores, thus leading to high-performance separations. Finally, expanded-bed adsorption is described for process integration to reduce separation steps and process time.

One-step affinity purification of recombinant urokinase-type plasminogen activator receptor using a synthetic peptide developed by combinatorial chemistry

Several lines of evidence have pointed to a role of urokinase-type plasminogen activator receptor (uPAR) as a modulator of certain biochemical processes that are active during tumor invasion and metastasis. Consequently, the structure and function of this receptor have been studied extensively, using recombinantly produced uPAR that has been purified by either affinity chromatography using its cognate ligand, the urokinase-type plasminogen activator (uPA), or a monoclonal anti-uPAR antibody (R2), or by hydroxyapatite. Here, we present a new method for the efficient one-step affinity purification of recombinant uPAR exploiting a high-affinity synthetic peptide antagonist (AE152). The corresponding parent peptide was originally identified in a random phage-display library and subsequently subjected to affinity maturation by combinatorial chemistry. This study compares the affinity purification of a soluble, recombinant uPAR using the monoclonal antibody R2 or the peptide AE152 immobilized on Sepharose. The two affinity ligands perform equally well in purifying uPAR from Drosophila melanogaster Schneider 2 cell culture medium and yield products of comparable purity, activity, and stability as judged by SDS-PAGE, size exclusion chromatography and surface plasmon resonance analysis. The general availability of peptide synthesis renders the present AE152-based affinity purification of uPAR more accessible than the traditional protein-based affinity purification strategies. In this way, large amounts of recombinant uPAR can conveniently be purified for further structural and functional studies.

Analysis of sugars and sugar polyols in atmospheric aerosols by chloride attachment in liquid chromatography/negative ion electrospray mass spectrometry

Sugars and sugar polyols are relatively abundant groups of water-soluble constituents in atmospheric aerosols. This paper describes a method that uses liquid chromatography-mass spectrometry (LC-MS) to analyze sugars and sugar polyols in atmospheric aerosols, ranging from C3 sugar alcohols to trisaccharides. Postcolumn addition of chloroform in acetonitrile was found to greatly enhance ionization of these compounds by forming chloride adduct ions in the negative-ion mode using electrospray ionization. A gradient elution program starting at 5%:95% H20/acetonitrile and ending at 30%:70% H2O/acetonitrile provides baseline separations of the sugars and sugar polyols on an amino-based carbohydrate column. The detection limits based on quantification of [M + 35Cl]- adduct ions were in the order of 0.1 microM. By eliminating the need for derivatization, this LC-MS based method provides a simpler alternative method to the commonly used and more laborious gas-chromatography based methods. It also has an additional advantage of being able to quantify trisaccharide sugars. The method was applied to analyze 30 ambient samples of fine particulate matter collected at a site away from urban centers in Hong Kong. The sugar compounds positively identified and detected in the ambient samples included four sugar alcohols (glycerol, erythritol, xylitol, and mannitol), three monosacchride sugars (xylose, fructose, and glucose), two disaccharides (sucrose, trehalose), two trisaccharides (melezitose, raffinose), and one anhydrosugar (levoglucosan). The sum of these sugar and sugar polyol compounds ranged from 38 to 1316 ng m(-3), accounting for an average of 1.3% organic carbon mass. Through the use of a principal component analysis of the ambient measurements, the mono- to trisactharide sugars and C3-C5 sugar polyols were identified to be mainly associated with soil/soil microbiota while the anhydrosugar (levoglucosan) was associated with biomass burning.

Protein A chromatography for antibody purification

Staphylococcal protein A (SPA) is one of the first discovered immunoglobulin binding molecules and has been extensively studied during the past decades. Due to its affinity to immunoglobulins, SPA has found widespread use as a tool in the detection and purification of antibodies and the molecule has been further developed to one of the most employed affinity purification systems. Interestingly, a minimized SPA derivative has been constructed and a domain originating from SPA has been improved to withstand the harsh environment employed in industrial purifications. This review will focus on the development of different affinity molecules and matrices for usage in antibody purification.