In-situ grafting hydrophilic polymer on chitosan modified poly(dimethylsiloxane) microchip for separation of biomolecules

Simple and fast isolation of circulating exosomes with a chitosan modified shuttle flow microchip for breast cancer diagnosis

Tumor-derived exosomes have been recognized as promising biomarkers for early-stage cancer diagnosis, tumor prognosis monitoring and individual medical treatment. However, it is a huge challenge to separate exosomes from trace biological samples in clinics for disease diagnosis. Herein, we propose a simple, quick, and label-free method for isolating circulating exosomes from serum of patients. The strategy synergistically integrates chitosan electrostatic-adsorption, micro-patterned substrates, and microfluidic shuttle flow control to enable the capture/release of circulating exosomes in a simple manner. Using this microchip, we can isolate exosomes from trace samples (10 μl) with relative purity over 90% and high RNA recovery ratio over 84% within 15 minutes, which is impossible for traditional ultracentrifugation methods. We then validate the application of the microchip using 24 serum samples from clinical breast cancer and breast fibroma patients. The isolated exosomes are subjected to miRNA sequencing and RT-PCR, followed by pathway prediction analysis. The results showed that exosomes were relevant to the invasion and metastasis of breast cancer cells and hsa-miR-18a-3p might have the potential to become a new biomarker for distinguishing breast cancer from breast fibroma (AUC = 0.83, P value = 0.019). This established method is simple, quick and easy to operate with integration. And it may pave a new way for clinical research on exosomes and tumor relevant diagnosis.

Lipid-Stabilized Double Emulsions Generated in Planar Microfluidic Devices

Microemulsions have found a wide range of applications exploiting their chemical and physical properties. Development of microfluidic-based approaches has allowed for the controlled production of highly monodispersed emulsions, including the formation of multiple and hierarchical emulsions. Conventional poly(dimethylsiloxane)-based microfluidic systems require tight spatial control over the surface chemistry when used for double emulsion generation, which can be challenging to achieve on the micrometer scale. Here, we present a two-dimensional device design, which can selectively be surface-treated in a straightforward manner and allows for the formation of uniform water/oil/water double emulsions by combining two distinct hydrophilic and hydrophobic surface properties. These surfaces are sufficiently separated in space to allow for imparting their functionalization without the requirement for lithographic approaches or complex flow control. We demonstrate that a mismatch between the wettability requirements of the continuous phase and the channel wall inherent in this approach can be tolerated over several hundreds of micrometers, opening up the possibility to use simple pressure-driven flows to achieve surface functionalization. The design architecture exhibits robust efficiency in emulsion generation while retaining simple device fabrication. We finally demonstrate the potential of this approach by generating water in oil in water emulsions with lipid molecules acting as surfactants.

In situ probing of switchable nanomechanical properties of responsive high-density polymer brushes on poly(dimethylsiloxane): An AFM nanoindentation approach

Nanomechanical characteristics of end grafted polymer brushes were studied by AFM based, colloidal probe nanoindentation measurements. A high-density polymer brush of poly(2-hydroxyethyl methacrylate) (PHEMA) was precisely prepared on the surface of a flexible poly(dimethylsiloxane) (PDMS) substrate oxidized in ultraviolet/ozone (UVO). Exposure times less than 10min resulted in laterally homogeneous oxidized surfaces, characterized by a SiO_x thickness ∼35nm and an increased modulus up to 9MPa, as shown by AFM nanoindentation measurements. We have demonstrated that a high surface density of up to ∼0.63chains/nm² of the well-defined PHEMA brushes can be grown from the surface of oxidized PDMS by surface-initiated atom transfer radical polymerization (SI-ATRP) from trimethoxysilane derivatives mixed-SAM. The reversible nanomechanical changes of PHEMA layer between extended (hydrated state) and collapsed (dehydrated state) chain upon immersing in selective and non-selective solvents were investigated by in situ AFM nanoindentation analysis in liquid environments. The elastic modulus derived from force-indentation curves obtained for swollen PHEMA grafted chains in water was estimated to be equal 2.7±0.2MPa, which is almost two orders of magnitude smaller than the modulus of dry PHEMA brush. Additionally, under cyclohexane immersion, the modulus of the PHEMA layer decreased by one order of magnitude, indicating a more compact chain packing at the PDMS surface.

Microfluidic channels with renewable and switchable biological functionalities based on host–guest interactions

Microfluidic channels with renewable and switchable biological functionalities were prepared using host–guest interactions.

Recent advances in nonbiofouling PDMS surface modification strategies applicable to microfluidic technology

In the last decade microfabrication processes including rapid prototyping techniques have advanced rapidly and achieved a fairly mature stage. These advances have encouraged and enabled the use of microfluidic devices by a wider range of users with applications in biological separations and cell and organoid cultures. Accordingly, a significant current challenge in the field is controlling biomolecular interactions at interfaces and the development of novel biomaterials to satisfy the unique needs of the biomedical applications. Poly(dimethylsiloxane) (PDMS) is one of the most widely used materials in the fabrication of microfluidic devices. The popularity of this material is the result of its low cost, simple fabrication allowing rapid prototyping, high optical transparency, and gas permeability. However, a major drawback of PDMS is its hydrophobicity and fast hydrophobic recovery after surface hydrophilization. This results in significant nonspecific adsorption of proteins as well as small hydrophobic molecules such as therapeutic drugs limiting the utility of PDMS in biomedical microfluidic circuitry. Accordingly, here, we focus on recent advances in surface molecular treatments to prevent fouling of PDMS surfaces towards improving its utility and expanding its use cases in biomedical applications.

Zeta potentials of polydimethylsiloxane surfaces modified by polybrene of different concentrations

Zeta potential is an important parameter for characterizing the electrokinetic properties of a solid-liquid interface. In this paper, zeta potentials of polydimethylsiloxane surfaces modified by polybrene (PB) solutions of different concentrations in Phosphate buffer solution and pure water were reported. The zeta potentials were measured by an induction current method. The measurements were validated both by a calibration curve based on the data reported in the published papers and by comparing the zeta potential determined by using the Smoluchowski equation and the measured velocity of the electrokinetic motion of particles in a microchannel.

Chain mobility and film softness mediated protein antifouling at the solid–liquid interface

Polymer chain mobility and film softness have been demonstrated to determine protein adsorption at the solid–liquid interface, and even overwhelm the hydrophilic effect under certain conditions. Polymers with high chain mobility and softness provide superior protein antifouling properties as a result of the high entropy barrier from film surfaces.

Stimulus-responsive polymers and other functional polymer surfaces as components in glass microfluidic channels

The integration of smart stimulus-responsive polymers as functional elements within microfluidic devices has greatly improved the performance capabilities of controlled fluid delivery. For their use as actuators in microfluidic systems, reversible expansion and shrinking are unique mechanisms which can be utilized as both passive and active fluid control elements to establish gate and valve functions (passive) and pumping elements (active). Various constituents in microfluidic glass channels based on stimulus-responsive elements have been reported based on pH-responsive, thermoresponsive and photoresponsive coatings. Fluid control and robust performance have been demonstrated in microfluidic devices in a number of studies. Here we give a brief overview of selected examples from the literature reporting on the use of stimulus response polymers as active or passive elements for fluid control in microfluidic devices, with specific emphasis on glass-based devices. The remaining challenges include improving switching times and achieving local addressability of the responsive constituent. We envisage tackling these challenges by utilizing redox-responsive polymers which offer fast and reversible switching and local addressability in combination with nanofabricated electrodes.

Automated chemiluminescence immunoassay for a nonionic surfactant using a recycled spinning-pausing controlled washing procedure on a compact disc-type microfluidic platform

A fully automated and integrated chemiluminescence immunoassay, carried out on a compact disc (CD)-type microfluidic platform, for the detection of alkylphenol polyethoxylates (APnEOs) is described. The pattern of the CD-type microchip was designed so as to permit the sequential solution delivery of the sample solution, the washing solution and the luminol solution, which are required in the chemiluminescence immunoassay process, along with a designed rotation program for spinning the CD-type microchip. The procedure for flowing the washing solution, the volume of which was limited on the CD-type microchip, was optimized by using a recycled spinning-pausing rotation program to overcome the non-specific adsorption of the horseradish peroxidase labeled APnEOs at the detection area. The detection limit of the immunoassay is about 10 ppb.

Revisiting the principles of preparing aqueous quantum dots for biological applications: the effects of surface ligands on the physicochemical properties of quantum dots

Aqueous CdSe/CdS/ZnS quantum dots with different surface ligands were prepared through ligand exchange and extensively characterized for biological applications.

Red blood cell dynamics in polymer brush-coated microcapillaries: A model of endothelial glycocalyx in vitro

The confined flow of red blood cells (RBCs) in microvasculature is essential for oxygen delivery to body tissues and has been extensively investigated in the literature, both in vivo and in vitro. One of the main problems still open in microcirculation is that flow resistance in microcapillaries in vivo is higher than that in vitro. This discrepancy has been attributed to the glycocalyx, a macromolecular layer lining the inner walls of vessels in vivo, but no direct experimental evidence of this hypothesis has been provided so far. Here, we investigate the flow behavior of RBCs in glass microcapillaries coated with a polymer brush (referred to as "hairy" microcapillaries as opposed to "bare" ones with no coating), an experimental model system of the glycocalyx. By high-speed microscopy imaging and image analysis, a velocity reduction of RBCs flowing in hairy microcapillaries as compared to bare ones is indeed found at the same pressure drop. Interestingly, such slowing down is larger than expected from lumen reduction due to the polymer brush and displays an on-off trend with a threshold around 70 nm of polymer brush dry thickness. Above this threshold, the presence of the polymer brush is associated with an increased RBC deformation, and RBC velocity is independent on polymer brush thickness (at the same pressure drop). In conclusion, this work provides direct support to the hypothesis that the glycocalyx is the main factor responsible of the higher flow resistance found in microcapillaries in vivo.

Industrial applications of marine carbohydrates

Biomaterials have been used increasingly in various fields, such as drug delivery, imaging, and tissue engineering. The main reason justifying the widespread use of biomaterials relies on its valuable and low-cost source of new drugs. Current research goals are focused on identifying more potent and specific compounds with antitumor, immunomodulatory, antihyperlipidemic, anticoagulant, and antiviral activities. The increasing knowledge of structural analysis and chemical modifications enables the use of these marine carbohydrates in a newer way for the human welfare. This chapter focuses on the recent developments related to industrial and biomedical applications using chitin, chitosan, alginate, agar, and carrageenan derivatives and reports the main advances published over the last 10-15 years.

Surface reconstruction by a "grafting through" approach: polyacrylamide grafted onto chitosan film

Grafted polymers and polymer brushes in particular have attracted significant attention in the last 2 decades as a way to alter and control interfacial properties. In the case of polymer brushes on solid substrates, a high grafting density of polymer chains results in stretching of the polymer coils normal to the substrate surface due to the effect of excluded volume. In this study, polyacrylamide is grafted to the surface of relatively soft thin films of chitosan. The "grafting through" approach is used by introducing double C═C bonds to amino groups of chitosan. The acquired kinetic data of grafting along with AFM and ellipsometry characterization suggest that the chitosan substrate undergoes surface reconstruction during the grafting of PAAm and simultaneously induces PAAm growth inside the soft substrate. As a result, much higher amounts of grafted polymer are achieved in comparison to traditional hard substrates like silicon or glass. Additionally, selective plasma etching of PAAm reveals filament-like structures oriented normal to the surface.

A programmable microenvironment for cellular studies via microfluidics-generated double emulsions

High throughput cellular studies require small sample volume to reduce costs and enhance sensitivity. Microfluidics-generated water-in-oil (W/O) single emulsion droplet systems, in particular, provide uniform, well defined and discrete microenvironment for cell culture, screening, and sorting. However, these single emulsion droplets are incapable of continuous supply of nutrient molecule and are not compatible with aqueous phase-based analysis. A solution is to entrap W/O droplets in another aqueous phase, forming water-in-oil-in-water (W/O/W) double emulsions. The external aqueous phase efficiently prevents desiccation and reduces the amount of organic component, and yet retaining the advantages of compartmentalization. The internal environment can also be programmed dynamically without the need of rupturing the droplets. In this study, we explore the potential application of W/O/W double emulsion droplets for cell cultivation, genetic activation and study of more complicated biological events such as bacteria quorum-sensing as an example. This study demonstrates the advantages and potential application of double emulsion for the study of complex biological processes.

Electrophoretic separation of neurotransmitters on a polystyrene nano-sphere∕polystyrene sulphonate coated poly(dimethylsiloxane) microchannel

In this paper, a poly(dimethylsiloxane) microchip with amperometric detector was developed for the electrophoretic separation and determination of neurotransmitters. For increasing the separation efficiency, the microchannel is modified by polystyrene sulphonate∕polystyrene nano-sphere self-assembly coating. A stable electro-osmotic flow (EOF) and higher separation efficiency are obtained in proposed modified microchannel. Under optimized conditions, dopamine, epinephrine, catechol, and serotonin are acceptably baseline separated in this 3.5 cm length separation channel with the theoretical plate number from 4.6 × 10(4) to 2.1 × 10(5) per meter and resolution from 1.29 to 12.5. The practicability of proposed microchip is validated by the recovery test with cerebrospinal fluid as real sample which resulted from 91.7% to 106.5%.

Enhancing single molecule imaging in optofluidics and microfluidics

Microfluidics and optofluidics have revolutionized high-throughput analysis and chemical synthesis over the past decade. Single molecule imaging has witnessed similar growth, due to its capacity to reveal heterogeneities at high spatial and temporal resolutions. However, both resolution types are dependent on the signal to noise ratio (SNR) of the image. In this paper, we review how the SNR can be enhanced in optofluidics and microfluidics. Starting with optofluidics, we outline integrated photonic structures that increase the signal emitted by single chromophores and minimize the excitation volume. Turning then to microfluidics, we review the compatible functionalization strategies that reduce noise stemming from non-specific interactions and architectures that minimize bleaching and blinking.

Single-monomer formulation of polymerized polyethylene glycol diacrylate as a nonadsorptive material for microfluidics

Nonspecific adsorption in microfluidic systems can deplete target molecules in solution and prevent analytes, especially those at low concentrations, from reaching the detector. Polydimethylsiloxane (PDMS) is a widely used material for microfluidics, but it is prone to nonspecific adsorption, necessitating complex chemical modification processes to address this issue. An alternative material to PDMS that does not require subsequent chemical modification is presented here. Poly(ethylene glycol) diacrylate (PEGDA) mixed with photoinitiator forms on exposure to ultraviolet (UV) radiation a polymer with inherent resistance to nonspecific adsorption. Optimization of the polymerized PEGDA (poly-PEGDA) formula imbues this material with some of the same properties, including optical clarity, water stability, and low background fluorescence, that make PDMS so popular. Poly-PEGDA demonstrates less nonspecific adsorption than PDMS over a range of concentrations of flowing fluorescently tagged bovine serum albumin solutions, and poly-PEGDA has greater resistance to permeation by small hydrophobic molecules than PDMS. Poly-PEGDA also exhibits long-term (hour scale) resistance to nonspecific adsorption compared to PDMS when exposed to a low (1 μg/mL) concentration of a model adsorptive protein. Electrophoretic separations of amino acids and proteins resulted in symmetrical peaks and theoretical plate counts as high as 4 × 10(5)/m. Poly-PEGDA, which displays resistance to nonspecific adsorption, could have broad use in small volume analysis and biomedical research.

Surface patterning of bonded microfluidic channels

Microfluidic channels in which multiple chemical and biological processes can be integrated into a single chip have provided a suitable platform for high throughput screening, chemical synthesis, detection, and alike. These microchips generally exhibit a homogeneous surface chemistry, which limits their functionality. Localized surface modification of microchannels can be challenging due to the nonplanar geometries involved. However, chip bonding remains the main hurdle, with many methods involving thermal or plasma treatment that, in most cases, neutralizes the desired chemical functionality. Postbonding modification of microchannels is subject to many limitations, some of which have been recently overcome. Novel techniques include solution-based modification using laminar or capillary flow, while conventional techniques such as photolithography remain popular. Nonetheless, new methods, including localized microplasma treatment, are emerging as effective postbonding alternatives. This Review focuses on postbonding methods for surface patterning of microchannels.

Hydrophilic biopolymer grafted on poly(dimethylsiloxane) surface for microchip electrophoresis

A novel covalent strategy was developed to modify the poly(dimethylsiloxane) (PDMS) surface. Briefly, dextran was selectively oxidized to aldehyde groups with sodium periodate and subsequently grafted onto amine-functionalized PDMS surface via Schiff base reaction. As expected, the coated PDMS surface efficiently prevented the biomolecules from adsorption. Electro-osmotic flow (EOF) was successfully suppressed compared with that on the native PDMS microchip. Moreover, the stability of EOF was greatly enhanced and the hydrophilicity of PDMS surface was also improved. To apply thus-coated microchip, the separation of peptides, protein and neurotransmitters was investigated in detail. For comparison, these analytes were also measured on the native PDMS microchips. The results demonstrated that these analytes were efficiently separated and detected on the coated PDMS microchips. Furthermore, the relative standard deviations of their migration times for run-to-run, day-to-day, and chip-to-chip reproducibilities were in the range of 0.6-2.7%. In addition, the coated PDMS microchips showed good stability within 1 month.

Synthesis and characterization of a poly(dimethylsiloxane)-poly(ethylene oxide) block copolymer for fabrication of amphiphilic surfaces on microfluidic devices

A poly(dimethylsiloxane)-poly(ethylene oxide) (PDMS-PEO) vinyl terminated block copolymer has been synthesized via a simple hydrosilylation reaction between hydride-terminated PDMS and PEO divinyl ether. This prepolymer can be subsequently cross-linked into an elastomer in a second hydrosilylation reaction involving a methylhydrosiloxane-dimethylsiloxane copolymer, forming a material suitable for the purposes of fabricating microfluidic devices. The presence of the PEO block in the prepolymer chain results in a much more hydrophilic material following cross-linking. The surface water contact angle of the PDMS-PEO material is 65 degrees +/- 3 (n = 6), as opposed to approximately 110 degrees for native PDMS. Droplets of water straddled by air within molded channels of the PDMS-PEO are concave in shape with contact angles where the fluid meets the side walls of 32 degrees +/- 4 (n = 8), while droplets in PDMS microchannels are more convex with contact angles of 95 degrees +/- 6 (n = 6). The length of the PDMS-PEO prepolymer chain and the multifunctional hydride cross-linker chains appear to dictate the durability of the elastomeric material. Young's modulus measurements yielded values of 0.94 +/- 0.08, 2.6 +/- 0.8, and 1.91 +/- 0.06 MPa for a [5% vinyl excess prepolymer and 10-fold excess of cross-linker], [10% vinyl excess prepolymer and 5-fold excess of cross-linker], and 10:1 PDMS, respectively, confirming that the elasticity of the cross-linked PDMS-PEO is similar to that of PDMS (Sylgard 184:10:1 mixture of elastomeric base to elastomer curing agent). The PDMS-PEO material still possesses enough PDMS character to allow molded channel architectures to be sealed between two pieces of the block copolymer by conformal contact. As a result of the more hydrophilic nature of the material, the channels of devices fabricated from this polymer are self-filling when using aqueous buffers, making it more user-friendly than PDMS for applications calling for background electrolytes void of organic modifiers. Different compositions of PDMS-PEO devices feature different electroosmotic flow values with the 5% vinyl excess prepolymer EOF values of 2.5 +/- 0.7 x 10(-4) and 5.7 +/- 0.8 x 10(-4) cm(2)/(V s) at pHs 6 and 9, respectively, and 1.2 +/- 0.3 x 10(-4) and 2.5 +/- 0.3 x 10(-4) cm(2)/(V s) for the 10% vinyl excess prepolymer device at pHs 6 and 9, respectively.

Reusable, polyethylene glycol-structured microfluidic channel for particle immunoassays

A microfluidic channel made entirely out of polyethylene glycol (PEG), not PEG coating to silicon or polydimethylsiloxane (PDMS) surface, was fabricated and tested for its reusability in particle immunoassays and passive protein fouling, at relatively high target concentrations (1 mg ml^-1). The PEG devices were reusable up to ten times while the oxygen-plasma-treated polydimethyl siloxane (PDMS) device could be reused up to four times and plain PDMS were not reusable. Liquid was delivered spontaneously via capillary action and complicated bonding procedure was not necessary. The contact angle analysis revealed that the water contact angle on microchannel surface should be lower than ~60°, which are comparable to those on dried protein films, to be reusable for particle immunoassays and passive protein fouling.

Applications of polymer brushes in protein analysis and purification

This review examines the application of polymer brush-modified flat surfaces, membranes, and beads for protein immobilization and isolation. Modification of porous substrates with brushes yields membranes that selectively bind tagged proteins to give 99% pure protein at capacities as high as 100 mg of protein per cubic centimeter of membrane. Moreover, enrichment of phosphopeptides on brush-modified matrix-assisted laser desorption/ionization (MALDI) plates allows detection and characterization of femtomole levels of phosphopeptides by MALDI mass spectrometry. Because swollen hydrophilic brushes can resist nonspecific protein adsorption while immobilizing a high density of proteins, they are attractive as substrates for protein microarrays. This review highlights the advantages of polymer brush-modified surfaces over self-assembled monolayers and identifies some research needs in this area.

Covalent modified hydrophilic polymer brushes onto poly(dimethylsiloxane) microchannel surface for electrophoresis separation of amino acids

A new environmentally friendly method is developed for preventing nonspecific biomolecules from adsorption on poly(dimethylsiloxane) (PDMS) surface via in situ covalent modification. o-[(N-Succinimdyl)succiny]-o'-methyl-poly(ethylene glycol) (NSS-mPEG) was covalently grafted onto PDMS microchannel surface that was pretreated by air-plasma and silanized with 3-aminopropyl-triethoxysilanes (APTES). The modification processes were carried out in aqueous solution without any organic solvent. The mPEG side chains displayed extended structure and created a nonionic hydrophilic polymer brushes layer on PDMS surface, which can effectively prevent the adsorption of biomolecules. The developed method had improved reproducibility of separation and stability of electroosmotic flow (EOF), enhanced hydrophilicity of surface and peak resolution, and decreased adsorption of biomolecules. EOF in the modified microchannel was strongly suppressed, compared with those in the native and silanized PDMS microchips. Seven amino acids have been efficiently separated and successfully detected on the coated PDMS microchip coupled with end-channel amperometric detection. Relative standard deviations (RSDs) of their migration time for run-to-run, day-to-day and chip-to-chip, were all below 2.3%. Moreover, the covalent-modified PDMS channels displayed long-term stability for 4 weeks. This novel coating strategy showed promising application in biomolecules separation.