Hydrophilic modification gigaporous resins with poly(ethylenimine) for high-throughput proteins ion-exchange chromatography

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

Preparation of cellulose-based chromatographic medium for biological separation: A review

Cellulose is a kind of renewable linear polysaccharide with good safety, hydrophilicity, biocompatibility and biodegradability and has become a commonly used chromatographic medium for biological separation and purification. The purpose of this paper is to describe the recent developments in the applications of cellulose-based absorbents as chromatographic medium. This review also attempts to explain the current situation of cellulose-based chromatographic medium from the aspects of cellulose dissolution, common strategies for generating spherical particles of cellulose and its derivatives (such as titration, emulsification, microfluidic and other synthesis methods) and improvement of adsorption properties. Furthermore, non-spherical cellulose-based chromatographic medium are also described briefly.

Enhanced Protein Adsorption Capacity of Macroporous Pectin Particles with High Specific Surface Area and an Interconnected Pore Network

There has been much interest in developing protein adsorbents using nanostructured particles, which can be engineered porous materials with fine control of the surface and pore structures. A significant challenge in designing porous adsorbents is the high percentage of available binding sites in the pores owing to their large surface areas and interconnected pore networks. In this study, continuing the idea of using porous materials derived from natural polymers toward the goal of sustainable development, porous pectin particles are reported. The template-assisted spray drying method using calcium carbonate (CaCO₃) as a template for pore formation was applied to prepare porous pectin particles. The specific surface area was controlled from 177.0 to 222.3 m² g^-1 by adjusting the CaCO₃ concentration. In addition, the effects of a macroporous structure, the specific surface area, and an interconnected pore network on the protein (lysozyme) adsorption capacity and adsorption mechanism were investigated. All porous pectin particles performed rapid adsorption (∼65% total capacity within 5 min) and high adsorption capacity, increasing from 1543 to the highest value of 2621 mg g^-1. The results are attributed to the high percentage of available binding sites located in the macropores owing to their large surface areas and interconnected pore networks. The macroporous particles obtained in this study showed a higher adsorption capacity (2621 mg g^-1) for lysozyme than other adsorbents. Moreover, the rapid uptake and high performance of this material show its potential as an advanced adsorbent for various macromolecules in the food and pharmaceutical fields.

Recent Developments of Liquid Chromatography Stationary Phases for Compound Separation: From Proteins to Small Organic Compounds

Compound separation plays a key role in producing and analyzing chemical compounds. Various methods are offered to obtain high-quality separation results. Liquid chromatography is one of the most common tools used in compound separation across length scales, from larger biomacromolecules to smaller organic compounds. Liquid chromatography also allows ease of modification, the ability to combine compatible mobile and stationary phases, the ability to conduct qualitative and quantitative analyses, and the ability to concentrate samples. Notably, the main feature of a liquid chromatography setup is the stationary phase. The stationary phase directly interacts with the samples via various basic mode of interactions based on affinity, size, and electrostatic interactions. Different interactions between compounds and the stationary phase will eventually result in compound separation. Recent years have witnessed the development of stationary phases to increase binding selectivity, tunability, and reusability. To demonstrate the use of liquid chromatography across length scales of target molecules, this review discusses the recent development of stationary phases for separating macromolecule proteins and small organic compounds, such as small chiral molecules and polycyclic aromatic hydrocarbons (PAHs).

Boronate-modified polyethyleneimine dendrimer as a solid-phase extraction adsorbent for the analysis of luteolin via HPLC

Luteolin (LTL) is a flavonoid containing a cis-diol, which has significant anti-inflammatory, anti-allergic, anti-diabetic, anti-cancer and neuroprotective activities. In this work, a silver modified boric acid affinity polyvinyl imine (PEI) dendritic adsorbent (PPEI-Ag@CPBA) was prepared on polystyrene (PS) for the rapid recognition and selective separation of LTL. A thin layer of polydopamine (PDA) was formed on the surface of the substrate by self-polymerization, and a PDA-coated PS material (PS@PDA) was obtained. PEI with sufficient active amino groups was grafted onto PS@PDA to obtain a PEI-modified material (PS@PDA@PEI), then AgNO3 was reduced with NaBH4, and PS@PDA@PEI was embedded on Ag. Finally, PPEI-Ag@CPBA was obtained through the condensation reaction of PEI with 4-carboxyphenyl boric acid (CPBA). The adsorption conditions were optimized, the optimal pH and the optimum amount of adsorbent were determined, and the maximum adsorption capacity was found to be 2.49 mg g-1. This method has been successfully applied to the selective identification of LTL in peanut shell samples, and provides a practical platform for the detection of LTL in complex substrates.

Bisphosphonated-immobilized porous cellulose monolith with tentacle grafting by atom transfer radical polymerization for selective adsorption of lysozyme

Here, a m-xylene bisphosphonate immobilized tentacle-type cellulose monolith (BP-PCM) is prepared by atom transfer radical polymerization for lysozyme purification. In the preparation, the m-xylene bisphosphonate was anchored glycidyl methacrylate and then polymerized to enhance the flexibility of the ligands to improve lysozyme adsorption capacity, and glycerol monomethacrylate serves as spacer to further optimize the layers structure and ligands density of the grafted tentacles for satisfactory adsorption capacity. The maximum static and dynamic adsorption capacity (10% breakthrough) of BP-PCM reach to 169.6 and 102.6 mg mL-1, respectively. Moreover, BP-PCM displays weak nonspecific adsorption and is able to successfully enrich lysozyme from diluted chicken egg white, indicating the excellent selectivity. The results demonstrated that BP-PCM is promising for use as high-capacity protein chromatography.

Recent advances in protein chromatography with polymer-grafted media

The strategy of using polymer-grafted media is effective to create protein chromatography of high capacity and uptake rate, giving rise to an excellent performance in high-throughput protein separation due to its high dynamic binding capacity. Taking the scientific development and technological innovation of protein chromatography as the objective, this review is devoted to an overview of polymer-grafted media reported in the last five years, including their fabrication routes, protein adsorption and chromatography, mechanisms behind the adsorption behaviors, limitations of polymer-grafted media and chromatographic operation strategies. Particular emphasis is placed on the elaboration and discussion on the behaviors of ion-exchange chromatography (IEC) with polymer-grafted media because IEC is the most suitable chromatographic mode for this kind of media. Recent advances in both the theoretical and experimental investigations on polymer-grafted media are discussed by focusing on their implications to the rational design of novel chromatographic media and mobile phase conditions for the development of high-performance protein chromatography. It is concluded that polymer-grafted media are suitable for development of IEC and mixed-mode chromatography with charged and low hydrophobic ligands, but not for hydrophobic interaction chromatography with high hydrophobic ligands and affinity chromatography with ligands that have single binding site on the protein.

An efficient procedure for preparing high-purity pingyangmycin and boanmycin from Streptomyces verticillus var. pingyangensis fermentation broth via macroporous cation-exchange resin and subsequent reversed-phase preparative chromatography

Pingyangmycin (PYM) and boanmycin (BAM), two individual components of bleomycin (bleomycin A5 and bleomycin A6), are glycopeptide antitumor antibiotics. An efficient procedure for the preparation of PYM and BAM from Streptomyces verticillus var. pingyangensis fermentation broth using macroporous cation-exchange (MCE) resin followed by medium-pressure preparative liquid chromatography (MPLC) based on monodisperse poly(styrene-co-divinylbenzene) (p(st-dvb)) microspheres was investigated in this paper. Nine frequently used MCE resins were screened by static adsorption and desorption to enrich PYM and BAM fromthe fermentation broth, and D157 resin was found to be the most effective. After one run of column-based dynamic adsorption and desorption, the contents of PYM and BAM were increased by factors of 13.8 and 12.1 with recovery yields of 84.21% and 81.47%, respectively. The enriched samples were subjected to MPLC with columns prepacked with the PolyRP 10-300 microspheres. The operational parameters of the MPLC, including the stationary phase and mobile phase compositions, sample/stationary phase ratio, sample loading scale and flow rate, were screened and optimized. The results showed that the separation and purification for PYM and BAM by MPLC were dramatically improved with a mobile phase modifier of 0.15 mol/L ammonium chloride aqueoussolution, a flow rate of 10 mL/min and a sample/stationary phase ratio of 1.0:100 (m/v, g/mL), and PYM and BAM with purities of more than 98.65% and 99.12% were obtained, respectively. The total recoveries of PYM and BAM reached 75.38% and 70.31%. The separation and purification method is simple, efficient, energy-saving, environmentally friendly and suitable for the large-scale preparation of high-purity PYM and BAM from Streptomyces verticillus var. pingyangensis fermentation broth.

Enhanced binding capacity of boronate affinity fibrous material for effective enrichment of nucleosides in urine samples

A novel polyethyleneimine-modified boronate affinity fibrous cotton with high binding capacity was prepared for in-pipette-tip solid phase extraction nucleosides in human urine.