Small footprint liquid chromatography-mass spectrometry for pharmaceutical reaction monitoring and automated process analysis

Determination of haloacetic acids in municipal tap water and swimming pool water using portable capillary liquid chromatography - mass spectrometry

In this study, a compact capillary liquid chromatography (capLC) system (<10 Kg) has been coupled with two small-footprint and portable single quadrupole mass spectrometers (<35 Kg) for the analysis of haloacetic acids (HAAs) in water samples. The portable capillary liquid chromatograph was equipped with a polar-modified C18 column (100 × 0.5 mm, particle size: 3 μm) and utilised gradient elution with 0.05 % formic acid and methanol to selectively separate and quantify the 9 HAAs (HAA9) recommended for monitoring by United States Environmental Protection Agency (USEPA). The successful quantification of HAA9 was accomplished using a portable capLC-ESI-MS system with a single quadrupole mass analyser for the first time without the addition of ion-pairing agents. Direct injection was applied to analyse HAA9 in tap and swimming pool water using the system incorporating the Shimadzu LCMS-2050 mass spectrometer. The limits of the detection (LODs) attained using the capLC-MS system were below the maximum contamination level (MCL), 60 µg/L, set by USEPA for the five most common HAAs in drinking water (HAA5). Dichloroacetic acid (DCAA) was detected in local tap water at the level of 5.3 µg/L, while 142.4 µg/L and 311.4 µg/L of DCAA and trichloroacetic acid (TCAA), respectively, were determined in local swimming pool water. The small-footprint capLC-MS system is compatible with the on-site analysis within water treatment plants and provides a cost-effective and green solution for the quantification of HAA9.

Nondestructive techniques for pharmaceutical drug product characterization

Pharmaceutical product development involves multiple steps; therefore product quality must be assessed to ensure robustness and acceptability. Raw components, production methods, and ambient conditions yield highly variable end products with low batch-to-batch consistency. Although end testing is performed to ensure product quality, intermediate quality checks are limited. Nondestructive techniques like terahertz, near-infrared, X-ray, and Raman spectroscopy are common tools for in-line quality checks and real-time data monitoring. Handheld devices based on these analytical techniques also help in identifying counterfeit drugs products. This review discusses modern regulatory perspectives on the use of nondestructive tools in pharmaceutical quality monitoring.

Energy-Resolved In-Source Collison-Induced Dissociation for Isomer Discrimination

While mass spectrometry remains a gold-standard tool for analyte detection, characterization, and quantitation, isomer differentiation is often a challenge. Tandem mass spectrometry is a common approach to increase the selectivity of mass spectrometry and energy-resolved measurements can provide further improvements. However, not all mass spectrometers, especially those that are very compact and affordable, are amenable to such experiments. For instance, single-stage mass spectrometers with soft ionization provide no dissociation information and quadrupole ion trap instruments with resonant excitation do not necessarily provide as informative of energy-resolved curves, for instance when extensive sequential dissociation is responsible for much of the "fingerprint". In-source collision-induced dissociation (IS-CID) is one approach to overcoming these barriers to exploit the analytical selectivity of energy-resolved CID without the need for additional instrumentation; this approach could broaden the reach of these selectivity gains to additional user bases (e.g., educational settings, field portable devices). Here, we specifically investigate energy-resolved IS-CID with the goal of (1) comparing between energy-resolved appearance curves measured with true tandem mass spectrometry on a quadrupole time-of-flight instrument and those obtained using IS-CID, (2) evaluating the approach as a means of differentiating isomers/isobar sets, especially those with similar dissociation patterns, and (3) exploring additional analytical considerations relevant to method development and implementation. This proof-of-concept work establishes the analytical potential of this approach, opening doors for future method development for specific applications.

Considerations for Method Development and Method Translation in Capillary Liquid Chromatography: A Tutorial

HPLC continues to be one of the most widely used measurement techniques for chemical analysis. Capillary LC, which utilizes narrow diameter columns operated at lower flow rates than analytical-scale LC, continues to gain adoption based on its reduced mobile phase consumption and increased sensitivity when coupled to MS detection. This tutorial offers practical insights into the most critical aspects of translating analytical-scale separations to the capillary scale. The selection of pumping systems, detectors, and the potential for performance loss due to extra-column effects are examined within the context of separations using columns with inner diameters ≤ 0.3 mm. Column choices within this diameter range are also detailed, both in terms of stationary phase support options and general commercial availability. The impact of these various factors on the effective development/translation of LC methods down to flow rates under 10 μL/min is described to provide readers with a basis for implementing these strategies within their own analytical workflows.

Computer-assisted multifactorial method development for the streamlined separation and analysis of multicomponent mixtures in (Bio)pharmaceutical settings

The (bio)pharmaceutical industry is rapidly moving towards complex drug modalities that require a commensurate level of analytical enabling technologies that can be deployed at a fast pace. Unsystematic method development and unnecessary manual intervention remain a major barrier towards a more efficient deployment of meaningful analytical assay across emerging modalities. Digitalization and automation are key to streamline method development and enable rapid assay deployment. This review discusses the use of computer-assisted multifactorial chromatographic method development strategies for fast-paced downstream characterization and purification of biopharmaceuticals. Various chromatographic techniques such as reversed-phase liquid chromatography (RPLC), hydrophilic interaction liquid chromatography (HILIC), ion exchange chromatography (IEX), hydrophobic interaction chromatography (HIC), and supercritical fluid chromatography (SFC) are addressed and critically reviewed. The most significant parameters for retention mechanism modelling, as well as mapping the separation landscape for optimal chromatographic selectivity and resolution are also discussed. Furthermore, several computer-assisted approaches for optimization and development of chromatographic methods of therapeutics, including linear, nonlinear, and multifactorial modelling are outlined. Finally, the potential of the chromatographic modelling and computer-assisted optimization strategies are also illustrated, highlighting substantial productivity improvements, and cost savings while accelerating method development, deployment and transfer processes for therapeutic analysis in industrial settings.

Further exploration of the collision-induced dissociation of select beta blockers: Acebutolol, atenolol, bisoprolol, carteolol, and labetalol

Beta blockers are a class of drugs commonly used to treat heart-related diseases; they are also regulated under the World Anti-Doping Agency. Tandem mass spectrometry is often used in the pharmaceutical industry, clinical analysis laboratory, and antidoping laboratory for detection and characterization of drugs and their metabolites. A deeper chemical understanding of dissociation pathways may eventually lead to an improved ability to predict tandem mass spectra of compounds based strictly on their chemical structure (or vice versa), which is especially important for characterization of unknowns such as emerging designer drugs or novel metabolites. In addition to providing insights into dissociation pathways, the use of energy-resolved breakdown curves can produce improved selectivity and lend insights into optimal fragmentation conditions for liquid chromatography-tandem mass spectrometry LC-MS/MS workflows. Here, we perform energy-resolved collision cell and multistage ion trap collision-induced dissociation-mass spectrometry (CID-MS) experiments, along with complementary density functional theory calculations, on five beta blockers (acebutolol, atenolol, bisoprolol, carteolol, and labetalol), to better understand the details of the pathways giving rise to the observed MS/MS patterns. Results from this work are contextualized within previously reported literature on these compounds. New insights into the formation of the characteristic product ion m/z 116 and the pathway leading to characteristic loss of 77 u are highlighted. We also present comparisons of breakdown curves obtained via qToF, quadrupole ion trap, and in-source CID, allowing for differences between the data to be noted and providing a step toward allowing for improved selectivity of breakdown curves to be realized on simple instruments such as single quadrupoles or ion traps.

Multi-wavelength deep-ultraviolet absorbance detector based upon program-controlled pulsing light-emitting diodes

A novel approach for multi-wavelength ultraviolet (UV) absorbance detection has been introduced employing a single board computer (SBC) with a field programmable gate array (FPGA), Red Pitaya SBC, to generate separated micro pulses for three deep-ultraviolet light-emitting diodes (DUV-LEDs), λmax = 235, 250, and 280 nm, along with data acquisition and processing via a custom-made program. The pulse set generation and data acquisition were synchronized using the SBC. The outputs of the three pulsing DUV-LEDs were combined and transmitted to the flow cell via a solarisation resistant trifurcated optical fiber (OF). An ultra-fast responding photodiode was connected to the optical-fiber-compatible flow cell to record the intensity of the DUV pulses. Upper limit of detector linearity (A95 %) was found to be 1917 mAU, 2189 mAU, and 1768 mAU at 235 nm, 250 nm, and 280 nm, respectively, with stray light ≤0.9 %. In addition, the effective path length (Leff) was estimated to be ≥98.0 % of the length of the used flow cell (50 mm). The new pulsed multi-LEDs absorbance detector (PMLAD) has been successfully coupled with a standard liquid chromatograph and utilized for the analysis of pharmaceuticals. Paracetamol, caffeine, and aspirin were simultaneously determined at 250, 280, and 235 nm, respectively, using the PMLAD. The absorbance ratios between the different wavelengths were applied to further confirm the identity of the studied compounds. Excellent linearity was achieved over a range of 0.1-3.2 µg/mL for paracetamol, 0.4-6.4 µg/mL for caffeine, and 0.8-12.8 µg/mL for aspirin with a regression correlation coefficient (r2) ≥ 0.99996. The quantitation limits (LOQs) were 0.10 µg/mL, 0.38 µg/mL, and 0.66 µg/mL for paracetamol, caffeine, and aspirin, respectively.

Open tubular liquid chromatography: Recent advances and future trends

Nano-liquid chromatography (nanoLC) is gaining significant attention as a primary analytical technique across various scientific domains. Unlike conventional high-performance LC, nanoLC utilizes columns with inner diameters (i.ds.) usually ranging from 10 to 150 μm and operates at mobile phase flow rates between 10 and 1000 nl/min, offering improved chromatographic performance and detectability. Currently, most exploration of nanoLC has focused on particle-packed columns. Although open tubular LC (OTLC) can provide superior performance, optimized OTLC columns require very narrow i.ds. (< 10 μm) and demand challenging instrumentation. At the moment, these challenges have limited the success of OTLC. Nevertheless, remarkable progress has been made in developing and utilizing OTLC systems featuring narrow columns (< 2 μm). Additionally, significant efforts have been made to explore larger columns (10-75 μm i.d), demonstrating practical applicability in many situations. Due to their perceived advantages, interest in OTLC has resurged in the last two decades. This review provides an updated outlook on the latest developments in OTLC, focusing on instrumental challenges, achievements, and advancements in column technology. Moreover, it outlines selected applications that illustrate the potential of OTLC for performing targeted and untargeted studies.

Column selection considerations in compact capillary liquid chromatography

Recent years have seen significant advances in compact, portable capillary LC instrumentation. This study explores the performances of several commercially available columns within the pressure and flow limits of both the columns and one of these compact LC instruments. The commercially available compact capillary LC system with UV-absorbance detector used in this study is typically operated using columns in the 0.15-0.3 mm internal diameter (i.d.) range. Efficiency measurements (i.e., theoretical plates, N) for six columns with i.d.s in this range and of varying lengths and pressure limits, packed with stationary phases of different particle diameters and morphologies, were made using a mixture of standard alkylphenones. Kinetic plot comparisons between columns that vary by one (or more) of these parameters are described, along with calculated kinetic performance and Knox-Saleem limits. These theoretical performance descriptions provide insight into optimal operating conditions when using capillary LC systems. Based on kinetic plot evaluation of available capillary columns in the 0.2-0.3 mm i.d. range with a conservative upper pressure limit of 330 bar packed with superficially porous particles, a 25 cm column could generate ∼47,000 plates in 7.85 min when operated at 2.4 µL/min. For comparison, more robust 0.3 mm i.d. columns (packed with fully porous particles) that can be operated at higher pressures than can be provided by the pumping system (conservative pump upper pressure limit of 570 bar), a ∼20 cm column could generate nearly 40,000 plates in 5.9 min if operated at 6 µL/min. Across all capillary LC columns measured, higher pressure limits and shorter columns can provide the best throughput when considering both speed and efficiency.

Compact capillary high performance liquid chromatography system for pharmaceutical on-line reaction monitoring

Due to their size, conventional high performance liquid chromatographs (HPLCs) are difficult to place close to a reaction vessel within a pharmaceutical manufacturing or development site. Typically, long transfer lines are required to move sample from the reactor to the HPLC for analysis and high solvent usage is required. However, herein a compact and modular separation system has been developed to enable co-location of an HPLC with a small-scale reactor for reaction monitoring in the synthesis of active pharmaceutical ingredients. Using a framework based on capillary HPLC, a compact gradient separation system with a fully modular architecture is described. A custom miniature diode-array detector with a linear dynamic range (up to 1500 mAU at 210 nm) was integrated and evaluated for on-line reaction monitoring. In evaluating system suitability, average peak area %RSD of <3%, and an average retention time %RSD of <0.7%, were achieved. To demonstrate practical utility, the compact system was coupled directly to an on-line lab-scale flow through reactor for continuous reaction monitoring in the laboratory fume hood, where a study of the 3rd Bourne reaction was used to compare the performance of the compact system with a commercially available process HPLC instrument (Waters PATROL UPLC). Further, 33 off-line samples from a continuous crystallization reactor were analysed and it was found that the developed compact HPLC system showed equivalent quantitative performance to an Agilent 1290 Infinity II HPLC system.

UPLC Technique in Pharmacy—An Important Tool of the Modern Analyst

In recent years, ultra-efficient liquid chromatography (UPLC) has gained particular popularity due to the possibility of faster separation of small molecules. This technique, used to separate the ingredients present in multi-component mixtures, has found application in many fields, such as chemistry, pharmacy, food, and biochemistry. It is an important tool in both research and production. UPLC created new possibilities for analytical separation without reducing the quality of the obtained results. This technique is therefore a milestone in liquid chromatography. Thanks to the increased resolution, new analytical procedures, in many cases, based on existing methods, are being developed, eliminating the need for re-analysis. Researchers are trying to modify and transfer the analytical conditions from the commonly used HPLC method to UPLC. This topic may be of strategic importance in the analysis of medicinal substances. The information contained in this manuscript indicates the importance of the UPLC technique in drug analysis. The information gathered highlights the importance of selecting the appropriate drug control tools. We focused on drugs commonly used in medicine that belong to various pharmacological groups. Rational prescribing based on clinical pharmacology is essential if the right drug is to be administered to the right patient at the right time. The presented data is to assist the analyst in the field of broadly understood quality control, which is very important, especially for human health and treatment. This manuscript shows that the UPLC technique is now an increasingly used tool for assessing the quality of drugs and determining the identity and content of active substances. It also allows the monitoring of active substances and finished products during their processing and storage.

Online monitoring of small volume reactions using compact liquid chromatography instrumentation

A wide variety of analytical techniques have been employed for monitoring chemical reactions, with online instrumentation providing additional benefits compared to offline analysis. A challenge in the past for online monitoring has been placement of the monitoring instrumentation as close as possible to the reaction vessel to maximize sampling temporal resolution and preserve sample composition integrity. Furthermore, the ability to sample very small volumes from bench-scale reactions allows the use of small reaction vessels and conservation of expensive reagents. In this study, a compact capillary LC instrument was used for online monitoring of as small as 1 mL total volume of a chemical reaction mixture, with automated sampling of nL-scale volumes directly from the reaction vessel used for analysis. Analyses to demonstrate short term (~2 h) and long term (~ 50 h) reactions were conducted using tandem on-capillary ultraviolet absorbance followed by in-line MS detection or ultraviolet absorbance detection alone, respectively. For both short term and long term reactions (10 and 250 injections, respectively), sampling approaches using syringe pumps minimized the overall sample loss to ~0.2% of the total reaction volume.