Combination of zeolitic imidazolate framework-67 and magnetic porous porphyrin organic polymer for preconcentration of neonicotinoid insecticides in river water

The Determination of Eight Biogenic Amines Using MSPE-UHPLC-MS/MS and Their Application in Regard to Changes in These Biogenic Amines in Traditional Chinese Dish-Pickled Swimming Crabs

In this study, a method for the determination of eight biogenic amines (BAs), including tyramine (Tyr), 2-phenylethylamine (2-Phe), histamine (His), tryptamine (Trp), spermidine (Spd), spermine (Spm), cadaverine (Cad), and putrescine (Put), in crab was established using ultra-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS), using a magnetic solid-phase extraction (MSPE) pretreatment, without derivatization, and the content changes in regard to these eight biogenic amines in the traditional Chinese dish, pickled swimming crabs, were investigated. The samples were purified via MSPE, using C nanofiber-coated magnetic nanoparticles (Fe3O4@C-NFs) as sorbents. The experimental variables involved in the MSPE, including the solution pH, adsorption and desorption time, adsorbent usage, and type and volume of the eluent, were investigated and optimized. Method validation indicated that the developed method showed good linearity (R2 > 0.995); the average recovery rates were 84.7% to 115%, with the intra-day and inter-day relative standard deviations (RSD, n = 6) ranging from 3.7% to 7.5% and 4.2% to 7.7%, respectively. The limit of detection (LOD) and limit of quantification (LOQ) for the eight BAs were 0.1 mg/kg~1.0 mg/kg and 0.3 mg/kg~3.0 mg/kg, respectively. Finally, this method was applied to determine the changes in the eight biogenic amines in pickled swimming crabs (Portunus trituberculatus) during storage at 20 °C and 400 BAC. Among the BAs evaluated, Cad, Put, and Tyr were the predominant amines formed during storage. The final content of Cad, Put, and Tyr reached 22.9, 20.1, and 29.0 mg/100 g at 4 °C for 16 d, and 47.1, 52.3, and 72.0 mg/100 g at 20 °C for 96 h, respectively. The results from this study can be used to expand the application range of magnetic materials in biogenic amine pretreatment and to strengthen the quality control of the traditional Chinese dish, pickled swimming crabs.

Development of a new method using dispersive liquid-liquid microextraction with hydrophobic natural deep eutectic solvent for the analysis of multiclass emerging contaminants in surface water by liquid chromatography-mass spectrometry

A new analytical method was developed for the determination of 14 multiclass emerging organic contaminants in surface waters using LC-MS, and Dispersive Liquid-Liquid Microextraction (DLLME) for extraction. Different Natural Deep Eutectic Solvents (NADESs) composed of terpenes and organic acids were tested as extraction solvents and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Hydrogen Nuclear Magnetic Resonance Spectroscopy (1H-NMR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), density, and viscosity, eliminating the need to use traditional chlorinated solvents. NADES produced with butyric acid and thymol showed the best results and was selected for application for the first time in the extraction of emerging organic contaminants of different classes in water samples. Vortex was used as the dispersion mode, eliminating the use of the dispersion solvent. Chromatographic conditions and sample preparation were optimized using multivariate experimental designs. The optimized chromatographic conditions included the column oven temperature, mobile phase modifiers, and stationary phase type. The optimized conditions for sample preparation included the extraction temperature and pH, salting out effect, and extraction solvent volume. The analytical performance was evaluated through repeatability and intermediate precision tests, with RSD values below 20%, and recoveries between 70 and 120%. The coefficient of determination was greater than 0.98 for all analytes. LOQs varied between 1.5 and 35 μg L-1. DLLME is a simple technique, it does not require expensive and specific equipment. Furthermore, replacing traditional chlorinated solvents with NADES makes the procedure more environmentally friendly. The method presented here can be applied to a wide range of analytes for the analysis of fresh, brackish, and salt waters. Up to the present moment, this is the first study using NADES based thymol and butyric acid for the determination of multiclass emerging contaminants in surface waters samples.

Development of Zeolite Imidazole Framework-Based Adsorbent for Effective Microextraction and Preconcentration of Histamine in Food Samples

This study is the first to focus on the preconcentration and determination of histamine (HIS) in food samples using zeolite imidazole frameworks (ZIFs) on a solid-phase microextraction (SPME) platform. ZIF was developed on a polypropylene hollow fiber (PPHF) substrate (ZIF@PPHF) and characterized. The extraction performance was optimized by adjusting several parameters, including pH, contact time for adsorption, and desorption conditions. Under the optimized conditions, a wide linear dynamic range (0.05-250 mg/L) with high R2 values (0.9989), low limit of detection (0.019 mg/L), and low limit of quantification (0.050 mg/L) were determined as analytical figures of merit. Additionally, a reusability study confirmed that ZIF@PPHF preconcentrated 83% of the HIS up to the fourth cycle. The developed method was used to preconcentrate HIS in fish and cheese samples. The spiked real samples confirmed the validity and accuracy of this method. The percentage mean recoveries ± relative standard deviation (% RSD, n = 3) at the concentration levels of 5, 10, and 50 mg/L of HIS and the sample amount of 5 g for intra- and inter days ranged from 97 ± 1.10 to 102.80 ± 0.90 and from 96.40 ± 1.82 to 103.40 ± 0.79, respectively. The results suggest that the analytical method validation parameters were acceptable, indicating the repeatability and sensitivity of the method.

Green synthesis of MIL53(Al)-modified paper-based analytical device for efficient extraction of neonicotinoid insecticides from environmental water samples

BACKGROUND

There is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases.

RESULTS

In this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array detection. The whole method showed satisfactory analytical performance with recoveries between 86 and 114 %, suitable precision (with RSD lower than 14 %), and limits of detection ranged from 1.0 to 1.6 μg L-1. Besides, the greenness of the method was assessed by application of different existing metrics. The developed extraction device was affordable (<0.08 €/device) and mechanical and chemically stable, being possible its reuse more than 11 cycles, thus demonstrating its suitability for rapid screening of pesticides in environmental samples.

SIGNIFICANCE

This report presents, for the first time, the green synthesis of MIL-53(Al)cellulose paper composite and its application as a sorptive phase for the extraction of NEOs from environmental water samples. We believe that the proposed strategy for fabricating these sustainable paper-based sorptive phases paves the way for further hybridizations with other MOFs or materials. Additionally, it opens up large possibilities for their application in extraction of pollutants or other hazardous compounds in aquatic environments.

Dihydroxyl modified UiO-66 as dispersive solid-phase extraction sorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry for detection of neonicotinoid insecticides

The extensive usage of neonicotinoid insecticides (NIs) has raised many concerns about their potential harm to environment and human health. Thus, it is of great importance to develop an efficient and reliable method to determine NIs in food samples. In this work, three Zr4+-based metal-organic frameworks functionalized with various numbers of hydroxyl groups were fabricated with a facile one-pot solvothermal method. Among them, dihydroxy modified UiO-66 (UiO-66-(OH)2) exhibited best adsorption performance towards five target NIs. Then, a sensitive and efficient method for detection of NIs from vegetable and fruit samples was established based on dispersive solid phase extraction (dSPE) with UiO-66-(OH)2 as adsorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Key parameters affecting the dSPE procedure including amounts of adsorbent, adsorption time, eluent solvents and desorption time were investigated. Under the optimal conditions, rapid adsorption of NIs within five minutes was achieved due to the high affinity of UiO-66-(OH)2 towards NIs. The developed method exhibited high sensitivity with limits of detection (LODs) varied from 0.003 to 0.03 ng/mL and wide linearity range over 3-4 orders of magnitude from 0.01 to 500 ng/mL. Furthermore, the established method was applied for determining trace NIs from complex matrices with recoveries ranging from 74.6 to 99.6 % and 77.0-106.8 % for pear and tomato samples, respectively. The results indicate the potential of UiO-66-(OH)2 for efficient enrichment of trace NIs from complex matrices.

Applications of magnetic solid-phase extraction in the sample preparation of natural product analysis (2020-2023)

Sample preparation, including extraction, separation, and purification, is a vital process for natural product analysis. As an attractive sample pretreatment method, magnetic solid-phase extraction (MSPE) has gained plenty of attention, mainly due to its simpler operation, less consumption of organic solvents, and shorter processing time than traditional SPE. This updated review is devoted to summarizing the applications of MSPE based on different magnetic nanomaterials in the analysis of various natural products in complex matrixes, such as biological samples, plants, and Chinese herbal preparations in the past four years (2020-2023). The preparation and fabrication of different materials are briefly introduced. Furthermore, the extraction mechanism and interaction forces between adsorbent and analytes are elaborated, and the advantages and disadvantages of different adsorbents coupled with various analytical methods for MSPE of different natural products are summarized. Moreover, the future trends and opportunities for MSPE in the natural product analysis are discussed. It is expected that this work can provide updated information for future research on the applications of MSPE in such fields.

Fabrication of Nitrogen Based Magnetic Conjugated Microporous Polymer for Efficient Extraction of Neonicotinoids in Water Samples

Facile and sensitive methods for detecting neonicotinoids (NEOs) in aquatic environments are crucial because they are found in extremely low concentrations in complex matrices. Herein, nitrogen-based magnetic conjugated microporous polymers (Fe3O4@N-CMP) with quaternary ammonium groups were synthesized for efficient magnetic solid-phase extraction (MSPE) of NEOs from tap water, rainwater, and lake water. Fe3O4@N-CMP possessed a suitable specific surface area, extended π-conjugated system, and numerous cationic groups. These properties endow Fe3O4@N-CMP with superior extraction efficiency toward NEOs. The excellent adsorption capacity of Fe3O4@N-CMP toward NEOs was attributed to its π-π stacking, Lewis acid-base, and electrostatic interactions. The proposed MSPE-HPLC-DAD approach based on Fe3O4@N-CMP exhibited a wide linear range (0.1-200 µg/L), low detection limits (0.3-0.5 µg/L), satisfactory precision, and acceptable reproducibility under optimal conditions. In addition, the established method was effectively utilized for the analysis of NEOs in tap water, rainwater, and lake water. Excellent recoveries of NEOs at three spiked levels were in the range of 70.4 to 122.7%, with RSDs less than 10%. This study provides a reliable pretreatment method for monitoring NEOs in environmental water samples.

Evaluation of organo-vermiculites as sorbent phases for solid-phase extraction of ibuprofen from water

The study of ibuprofen (IBU) preconcentration was carried out making use of a homemade column for solid-phase extraction (SPE), using vermiculite (VT) or organo-vermiculites (OVTs) as sorbent phases. Aqueous samples (50.0 mL) percolated the column and IBU was sorbed onto the VT or OVT and then desorbed using acetonitrile. Employing this SPE system and OVT, calibration curves were generated for IBU, by spectrophotometric quantification using the α-naphthylamine method. R2 values higher than 0.9950 and LOD between 12 and 18 μg L-1 were observed, for real enrichment factors of 21 and 31, by using OVTs. The analytical protocol was applied to three water samples, which were spiked with IBU solutions to evaluate the precision and accuracy of the method. Recoveries between 77 and 110% at three different IBU concentrations and RSD lower than 18% were observed, even by using the spectrophotometric method. The protocol developed in this study demonstrated that the OVT was appropriate to work as a preconcentration phase for IBU determination in water samples.

In situ growth of ZIF-67 to construct core-shell mosaic structural composites for efficient extraction of benzoylurea insecticides

A novel mosaic structure Silica@C/Co@ZIF-67 composite was synthesized by successfully embedding Co nanoparticles on the surface of silica spheres with the help of thermoplastic polyethyleneimine by carbon-reduction. The ZIF-67 half-shell layer structure was synthesized by the in-situ growth of ZIF-67 on the surface of silica spheres through the coordination of 2-methylimidazole with Co metal nodes. The composite was used as a magnetic solid-phase extraction adsorbent combined with high performance liquid chromatography-ultraviolet detector (HPLC-UV) for the extraction and determination of benzoylurea insecticides (BUs) in vegetables and tea. Based on the presence of π-π, hydrophobic and hydrogen bonding interactions between Silica@C/Co@ZIF-67 and BUs, the BUs were rapidly captured by the composites resulting in high adsorption performance. Under the optimal extraction parameters, the linear ranges were 0.3-200 µg L-1 for diflubenzuron, 0.6-200 µg L-1 for chlorbenzuron, and 1.0-200 µg L-1 for triflumuron, teflubenzuron, and flufenoxuron, with correlation coefficients (R2) greater than 0.9991. The limits of detection (LODs) of the method were 0.1-0.3 μg L-1, and the relative standard deviations (RSDs) were 1.2-3.0% for intra-day and 2.6-4.6% for inter-day. In the spiked recovery experiments of vegetables and tea, the recoveries of the five kinds of BUs ranged from 75.8 to 112.9%. In addition, after 10 repetitions using Silica@C/Co@ZIF-67, the recoveries of the five kinds of BUs were still as high as 78.4 to 83.9%.

Porphyrin/phthalocyanine-based porous organic polymers for pollutant removal and detection: Synthesis, mechanisms, and challenges

The growing global concern about environmental threats due to environmental pollution requires the development of environmentally friendly and efficient removal/detection materials and methods. Porphyrin/phthalocyanine (Por/Pc) based porous organic polymers (POPs) as a newly emerging porous material are prepared through polymerizing building blocks with different structures. Benefiting from the high porosity, adjustable pore structure, and enzyme-like activities, the Por/Pc-POPs can be the ideal platform to study the removal and detection of pollutants. However, a systematic summary of their application in environmental treatment is still lacking to date. In this review, the development of various Por/Pc-POPs for pollutant removal and detection applications over the past decade was systematically addressed for the first time to offer valuable guidance on environmental remediation through the utilization of Por/Pc-POPs. This review is divided into two sections (pollutants removal and detection) focusing on Por/Pc-POPs for organic, inorganic, and gaseous pollutants adsorption, photodegradation, and chemosensing, respectively. The related removal and sensing mechanisms are also discussed, and the methods to improve removal and detection efficiency and selectivity are also summarized. For the future practical application of Por/Pc-POPs, this review provides the emerging research directions and their application possibility and challenges in the removal and detection of pollutants.

Synthesis of phosphate-functionalized magnetic porous organic polymer: A sorbent for sensitive determination of neonicotinoid insecticides in water and lemon juice

There is an urgent need to prepare advanced functional materials for extraction and enrichment of trace organic pollutants from different samples. In this work, two novel phosphate-functionalized porous organic polymers (DBP-POP and DPP-POP) were synthesized for the first time. Compared with phosphate-free counterpart, both phosphate-functionalized POPs showed excellent adsorption performance for the neonicotinoids due to the hydrogen bonding, π-π interaction and hydrophobic interaction. For ease of separating the sorbent from solution, magnetic DBP-POP (M-DBP-POP) was further prepared as sorbent to extract neonicotinoids from environmental water and lemon juice samples prior to their determination by high performance liquid chromatography-ultraviolet detection. Under optimal conditions, the detection limits (S/N = 3) of the method were 0.01-0.08 ng mL-1 for water and 0.03-0.10 ng mL-1 for lemon juice. The recoveries were in the range of 80.0% to 113.0% with relative standard deviation less than 10.6%. This work demonstrated the feasibility of phosphate-functionalized POPs for adsorption applications.

Ultra-High Adsorption Capacity of Core-Shell-Derived Magnetic Zeolite Imidazolate Framework-67 as Adsorbent for Selective Extraction of Theophylline

A core-shell-derived structural magnetic zeolite imidazolate framework-67 (Fe₃O₄-COOH@ZIF-67) nanocomposite was fabricated through a single-step coating of zeolite imidazolate framework-67 on glutaric anhydride-functionalized Fe₃O₄ nanosphere for the magnetic solid-phase extraction (MSPE) of theophylline (TP). The Fe₃O₄-COOH@ZIF-67 nanocomposite was characterized through scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, Zeta potential analysis, X-ray diffraction, Brunauer-Emmett-Teller, and vibrating sample magnetometer. The material has a high specific surface area and good magnetism, which maintains the regular dodecahedron structure of ZIF-67 without being destroyed by the addition of Fe₃O₄-COOH nanospheres. The Fe₃O₄-COOH@ZIF-67 can rapidly adsorb TP mainly through the strong coordination interaction between undercoordinated Co²⁺ on ZIF-67 and -NH from imidazole of TP. The adsorption and desorption conditions, such as the amount of adsorbent, adsorption time, pH value, and elution solvent, were optimized. The kinetics of TP adsorption on Fe₃O₄-COOH@ZIF-67 was found to follow pseudo-second-order kinetics. The Langmuir model fits the adsorption data well and the maximum adsorption capacity is 1764 mg/g. Finally, the developed MSPE-HPLC method was applied in the enrichment and analysis of TP in four tea samples and rabbit plasma. TP was not detected in oolong tea and rabbit plasma, and its contents in jasmine tea, black tea, and green tea are 5.80, 4.31, and 1.53 μg/g, respectively. The recoveries of spiked samples are between 74.41% and 86.07% with RSD in the range of 0.81-3.83%. The adsorption performance of Fe₃O₄-COOH@ZIF-67 nanocomposite was nearly unchanged after being stored at room temperature for at least 80 days and two consecutive adsorption-desorption cycles. The results demonstrate that Fe₃O₄-COOH@ZIF-67 nanocomposite is a promising magnetic adsorbent for the preconcentration of TP in complex samples.

Organic solvent-free solid-phase extraction of acetamiprid in food samples using Strep-Tag system integrated apta-magnetic sorbents

A novel magnetic sorbent, named ABA-(Strep-tag II)-STMB, was prepared by modifying the acetamiprid-binding aptamer (ABA) onto Strep-Tactin-coated magnetic beads (STMBs) via Strep-tag II. The integration of the Strep-tag system allows the elution of the target by the addition of D-biotin, which can compete with Strep-tag II for the Strep-Tactin sites on the magnetic beads, instead of organic solvents. The sorbent showed good selectivity and reusability, and the extraction efficiency could still reach 90.5 % after 8 reuses. Under the optimized conditions, the developed magnetic solid-phase extraction (MSPE) method exhibited good linearity in the range of 0.1-100 μM, with the limits of detection (LOD) of 0.017-0.019 μM, and the limits of quantification (LOQ) of 0.057-0.066 μM. The relative standard deviations (RSDs) were below 5.51 %. The spiked recoveries were 84.4 %-96.0 %. The analysis results were in good agreement with those of the QuEChERS method.

Design of hydroxyl-functionalized nanoporous organic polymer with tunable hydrophilic-hydrophobic surface for solid phase extraction of neonicotinoid insecticides

As being widely used insecticides, neonicotinoid residues are toxic and harmful to human health and aquatic ecosystems. Thus, the sensitive monitoring of neonicotinoids in water and food samples is highly desirable to reduce their risks to humans. Herein, four novel hydroxyl-functionalized nanoporous organic frameworks (OH-NOP1, OH-NOP2, OH-NOP3 and OH-NOP4) with tunable hydrophilic-hydrophobic surface have been designed and fabricated for the first time by employing luteolin as monomer and 4,4'-bis(chloromethyl)-1,1'-biphenyl as crosslinker at the molar ratio of 3:1, 1:1, 1:3 and 1:6, respectively. When the molar ratio of luteolin to crosslinker was 1:3, OH-NOP3 was obtained and it presented the highest affinity with excellent adsorption performance towards the studied neonicotinoids. The adsorption mechanism was proposed to be the strong hydrogen bond, polar interaction, Lewis acid-base interaction and pore adsorption between OH-NOP3 and neonicotinoids. Then, utilizing OH-NOP3 as sorbent for solid phase extraction cartridges, an effective method for extraction and preconcentration of neonicotinoids followed by high performance liquid chromatography analysis has been developed for quantitative detection of neonicotinoids from water and edible fungi. The method provided good linearity over the range of 0.06-100.0 ng mL^-1 for lake water, 1.5-100.0 ng g^-1 for pleurotus eryngii and sea-shroom. Low detection limit (at the signal to noise ratio of 3) was achieved in the range of 0.02-0.08 ng mL^-1 for water, 0.50-0.60 ng g^-1 for pleurotus eryngii and 0.50-0.80 ng g^-1 for sea-shroom, while the limit of quantification was 0.06-0.25 ng mL^-1, 1.50-1.80 ng g^-1 and 1.50-2.50 ng g^-1, respectively. Satisfactory method recoveries (85.1-112%) were obtained, with relative standard deviations below 8.2%. This study offered a new strategy for designing efficient sorbents to adsorb or remove organic pollutants based on the structure and properties of substrates.

Determination of Neonicotinoid Insecticides in Environmental Water by the Enrichment of MIL-53 Mixed Matrix Membrane Coupled with High Performance Liquid Chromatography

Metal organic framework based mixed matrix membranes (MOF-MMMs) were synthesized and applied for dispersive membrane extraction (DME) of four neonicotinoid insecticides (nitenpyram, thiacloprid, imidacloprid, and acetamiprid) in environmental water, combined with high performance liquid chromatography (HPLC) for determination. Several experimental conditions were optimized in detail, involving dosage percentage of MOF, extraction time, sample pH, salinity, type and volume of eluent, and elution time. High sensitivity with limits of detection and quantification were achieved as 0.013-0.064 μg L^-1 and 0.038-0.190 μg L^-1, respectively, and good precision with relative standard deviations were obtained as 3.07-12.78%. The proposed method has been successfully applied to determine four neonicotinoid insecticides in tap water, surface water, and seawater, satisfactory recoveries of spiked water samples were between 72.50 and 117.98%. Additionally, the MOF-MMMs showed good reusability with the extraction efficiencies almost remaining stable after 14 cycles. The MOF-MMMs based DME followed by the HPLC method can be a promising utility for the determination of neonicotinoid insecticides in environmental water samples, with high sensitivity and convenient operation.

Metal-porphyrinic framework nanotechnologies in modern agricultural management

Metal-porphyrinic frameworks are an important subclass of metal-organic frameworks (MOFs). These porous materials exhibit a large number of applications for sustainable development and related environmental considerations. Their attractive features include (1) as a free base or metalated with zinc(II) or iron(II or III), they are environmentally benign, and (2) they absorb visible light and are emissive and semi-conducting, making them convenient tools for sensing agrochemicals. But the key feature that makes these nano-sized pristine materials or their composites in many ways superior to most MOFs is their ability to photo-generate reactive oxygen species with visible light, including singlet oxygen. This review describes important issues related to agriculture, including controlled delivery of pesticides and agrochemicals, detection of pesticides and pathogenic metals, elimination of pesticides and toxic metals, and photodynamic antimicrobial activity, and has an important implication for food safety. This comprehensive review presents the progress of the rather rapid developments of these functional and increasingly nano-sized materials and composites in the area of sustainable agriculture.