Flexible electrochromic materials based on CNT/PDA hybrids

Perylene diimide growth on both sides of carbon nanotubes for remarkably boosted photocatalytic degradation of diclofenac

Perylene diimide and its derivatives are promising photocatalysts for clean and efficient production, but their practical application in the field of photocatalysis is still limited by the rapid photogenerated charge recombination. In this work, the confined photocatalysts were synthesized by using a gas-phase self-assembly method and comparing the morphology and photocatalytic properties of different photocatalysts after the confinement of carbon nanotubes. The confinement effect of carbon nanotubes acts to stabilize perylene diimide. Electrostatic interaction formed by a wide range of dispersion forces is dominant in the process of stabilization. Benefitting from the three-dimensional electron transfer pathway formed by the conjugation of perylene diimide with a large number of π electrons to the carbon nanotubes plane, the confined photocatalyst shows the pseudo-first-order kinetic constant k of 1.106 h^-1 for the photocatalytic degradation of diclofenac under light, which is 6.11 times higher than that of perylene diimide. The electron transfer created an internal electric field at the interface from carbon nanotubes to perylene diimide, which greatly accelerated the separation of photogenerated electron-hole pairs and improved the photocatalytic activity. This study further expands the applicability of perylene diimide in the field of photocatalysis and provides a new approach for water environment treatment.

Electro-Thermochromic Luminescent Fibers Controlled by Self-Crystallinity Phase Change for Advanced Smart Textiles

Smart textiles with tunable luminescence have received special attention due to their great potential in various advanced photonic applications. Particularly, the development of one-dimensional, on-demand, responsive fluorescence fibers with excellent adaptability is of great significance. Herein, we propose electro-thermochromic fluorescence fibers regulated by a self-crystallinity phase change; that is, their tunable luminescence properties are derived from the reversible conversion of the dispersion state and fluorescence emission of fluorophore molecules during the crystallization/melting processes of phase-change materials. First results obtained with an alginate wet-spinning system demonstrate that the self-crystallinity phase change can produce polymeric fibers with thermochromic fluorescence behavior, which are prepared using microemulsion particles containing a phase-change fatty acid and coumarin fluorescent dyes. These thermochromic fluorescence fibers possess a fast response speed, high emission contrast, and good reversibility (>100 cycles). Particularly, the thermochromic fluorescent fibers can gain an electrotriggered capability by means of electric heating materials, and their great potential in precision operation applications is demonstrated. It is easy to adjust the switching point of the electro-thermochromic fluorescence fibers, highlighting their potential use in a diverse range of applications, the designs of which can be personalized. This work offers a simple yet versatile strategy for constructing electro-thermochromic fluorescence fibers for advanced smart textiles.

Removal of Heavy Metals from Wastewater Using Novel Polydopamine-Modified CNTs-Based Composite Membranes

The presence of major heavy metals including Pb2+, Cu2+, Co2+, Ni2+, Hg2+, Cr6+, Cd2+, and Zn2+ in water is of great concern because they cannot degrade or be destroyed. They are toxic even at very low concentrations. Therefore, it is necessary to remove such toxicants from water. In the current study, polydopamine carbon nanotubes (PD-CNTs) and polysulfone (PS) composite membranes were prepared. The structural and morphological features of the prepared PDCN composite membranes were studied using FTIR, XRD, SEM, and EDS. The potential application of PDCNs for heavy metal removal was studied for the removal of Pb2+, Cr6+, and Cd2+ from wastewater. The maximum removal efficiency of 96.1% was obtained for Cr6+ at 2.6 pH using a composite membrane containing 1.0% PD-CNTs. The removal efficiencies decreased by 64.1 and 73.4, respectively, by enhancing the pressure from 0.50 up to 0.85 MPa. Under the same circumstances, the percentages of Pb+2 removal at 0.49 bar by the PDCNS membranes containing 0.5% and 1.0% PD-CNT were 70 and 90.3, respectively, and decreased to 54.3 and 57.0, respectively, upon increasing the pressure to 0.85 MPa. The results showed that PDCNS membranes have immense potential for the removal of heavy metals from water.

Bistable Elastic Electrochromic Ionic Gels for Energy-Saving Displays

The diversification of electrochromic materials greatly expands the application fields of electrochromic devices. However, highly flexible electrochromic materials remain challenging due to the inherent limitations associated with the existing electrochromic processes. Inspired by the hydrogen bonding effect in the hydrogel structure, a highly elastic and bistable electrochromic ionic gel based on a hydrogen bonding cross-linking network is prepared by solution polymerization having excellent tensile resilience, uniform coloring, reversible switching (≤24.3 s), maximum transmittance change (≥80%), bistability (54 h), reversibility (>500 cycles), and coloration efficiency (≥85.3 cm²·C^-1). This method has been used to develop bistable electrochromic displays. The unconventional exploration of the bistable design principle may provide a new idea for the realization of bistable electrochromic devices.

Quench-Type Electrochemiluminescence Immunosensor Based on Resonance Energy Transfer from Carbon Nanotubes and Au-Nanoparticles-Enhanced g-C3N4 to CuO@Polydopamine for Procalcitonin Detection

A new type of sandwich electrochemiluminescence (ECL) immunosensor dependent on ECL resonance energy transfer (ECL-RET) to achieve sensitive detection of procalcitonin (PCT) has been designed. In brief, carbon nanotubes (CNT) and Au-nanoparticles-functionalized graphitic carbon nitride (g-C₃N₄-CNT@Au) and CuO nanospheres covered with polydopamine (PDA) layer (CuO@PDA) were synthesized and applied as ECL donor and receptor, respectively. g-C₃N₄-CNT nanomaterials were in situ prepared on the basis of π-π conjugation, and the CNT content in the composite were optimized to achieve a strong and stable ECL signal. At the same time, Au nanoparticles were used to functionalize g-C₃N₄-CNT to further increase the ECL intensity and the loading amount of primary antibody (Ab₁). Moreover, CuO@PDA was first used to successfully quench the ECL signal of g-C₃N₄-CNT@Au. Under the optimum experimental conditions, the linear detection range for PCT concentration was within 0.0001-10 ng mL^-1 and the detection limit was 25.7 fg mL^-1 (S/N = 3). Considering prominent specificity, reproducibility, and stability, the prepared immunosensor was used to assess recovery rate of PCT in human serum according to the standard addition method and the result was satisfactory. In addition, it is worth mentioning that a novel ECL-RET pair of g-C₃N₄-CNT@Au (donor)/CuO@PDA (acceptor) was first developed, which offered an effective analytical tool for sensitive detection of biomarkers in early disease diagnostics.

Smart Textile-Integrated Microelectronic Systems for Wearable Applications

The programmable nature of smart textiles makes them an indispensable part of an emerging new technology field. Smart textile-integrated microelectronic systems (STIMES), which combine microelectronics and technology such as artificial intelligence and augmented or virtual reality, have been intensively explored. A vast range of research activities have been reported. Many promising applications in healthcare, the internet of things (IoT), smart city management, robotics, etc., have been demonstrated around the world. A timely overview and comprehensive review of progress of this field in the last five years are provided. Several main aspects are covered: functional materials, major fabrication processes of smart textile components, functional devices, system architectures and heterogeneous integration, wearable applications in human and nonhuman-related areas, and the safety and security of STIMES. The major types of textile-integrated nonconventional functional devices are discussed in detail: sensors, actuators, displays, antennas, energy harvesters and their hybrids, batteries and supercapacitors, circuit boards, and memory devices.