Advances of macroalgae biomass for the third generation of bioethanol production

Ultrasonic‑assisted molten salt hydrates pretreated Eucheuma cottonii residues as a greener precursor for third-generation l-lactic acid production

This study aims to establish an efficient pretreatment method that facilitates the conversion of sugars from macroalgae wastes, Eucheuma cottonii residues (ECRs) during hydrolysis and subsequently enhances l-lactic acid (L-LA) production. Hence, ultrasonic-assisted molten salt hydrates (UMSHs) pretreatment was proposed to enhance the accessibility of ECRs to hydrolyze into glucose through dilute acid hydrolysis (DAH). The obtained hydrolysates were employed as the substrate in producing L-LA by separate hydrolysis and fermentation (SHF). The maximum glucose yield (97.75 %) was achieved using UMSHs pretreated ECRs with 40 wt% ZnCl2 at 80 °C for 2 h and followed with DAH. The optimum glucose to L-LA yield obtained for SHF was 90.08 % using 5 % (w/w) inoculum cell densities of B. coagulans ATCC 7050 with yeast extract (YE). A comparable performance (89.65 %) was obtained using a nutrient combination (lipid-extracted Chlorella vulgaris residues (CVRs), vitamin B3, and vitamin B5) as a partial alternative for YE.

On reducing the emissions of CO, HC, and NOx from gasoline blended with hydrogen peroxide and ethanol: Optimization study aided with ANN-PSO

The use of ethanol blending for gasoline has been found to have a significant effect in reducing emissions without any loss in the performance of a spark ignition engine. However, an increase in the emissions of oxides of nitrogen (NO_x) may be seen due to the increased oxygen content in the fuel. On the contrary, emulsifying fuel with hydrogen peroxide (H₂O₂) has shown a substantial effect in reducing all the emissions, including NO_x in a compression ignition (CI) engine. In this study, 10% ethanol is blended with gasoline (E10) and further emulsified with H₂O₂ up to 1.5%. When compared to neat gasoline, a 4.8% increase in brake thermal efficiency (BTE) is obtained with 10% ethanol and 1.5% H₂O₂. The corresponding average decrease in the emissions of carbon monoxide (CO), hydrocarbons (HC), and NO_x were 80%, 43%, and 17%, respectively. The results of the experimental trials are used to model an artificial neural network (ANN) to derive a relationship between the input factors of ethanol concentration, H₂O₂ concentration, and engine speeds with the output responses of BTE, CO, HC, and NO_x. The ANN models of each response are optimized using a multi-objective particle swarm optimization (PSO) for maximizing BTE and minimizing emissions of CO, HC, and NO_x. The PSO results showed that operating the engine at 2000 rpm using ethanol blending between 4 and 6% and H₂O₂ emulsification of 1.5% are the best optimal conditions.

Activation of galactose utilization by the addition of glucose for the fermentation of agar hydrolysate using Lactobacillus brevis ATCC 14869

OBJECTIVE

To investigate the application of carbon catabolite repression (CCR) relaxed Lactobacillus brevis ATCC 14869 in the utilization of agar hydrolysate to produce bioethanol and lactic acid through fermentation.

RESULTS

As a single carbon source, galactose was not metabolized by L. brevis. However, L. brevis consumed galactose simultaneous to glucose and ceased cell growth after depletion of glucose. For complete use of galactose from agar hydrolysis, glucose need to be periodically replenished into the growth medium. Overall, L. brevis successfully used agar hydrolysate and produced 17.2 g/L of ethanol and 31.9 g/L of lactic acid. The maximum specific cell growth rate on galactose and glucose mixture was the same with the glucose-only medium at 0.12 h^-1. The molar product yields from glucose for lactic acid and ethanol were 1.02 and 0.95 respectively, equal to values obtained from the simultaneous utilization of glucose and galactose.

CONCLUSION

In contribution to the ongoing efforts to utilize marine biomass, the relaxed CCR in Lactobacillus brevis ATCC 14869 was herein exploited to produce bioethanol and lactic acid from red seaweed hydrolysates.

R, Maitra S, Tarafdar A, Alphy MP, Kumar AN, Madhavan A, Sirohi R, Awasthi MK, Sindhu R, Varjani S, Binod P. Waste-Derived Fuels and Renewable Chemicals for Bioeconomy Promotion: A Sustainable Approach

Bio-based fuels and chemicals through the biorefinery approach has gained significant interest as an alternative platform for the petroleum-derived processes as these biobased processes are noticed to have positive environmental and societal impacts. Decades of research was involved in understanding the diversity of microorganisms in different habitats that could synthesize various secondary metabolites that have functional potential as fuels, chemicals, nutraceuticals, food ingredients, and many more. Later, due to the substrate-related process economics, the diverse low-value, high-carbon feedstocks like lignocellulosic biomass, industrial byproducts, and waste streams were investigated to have greater potential. Among them, municipal solid wastes can be used as the source of substrates for the production of commercially viable gaseous and liquid fuels, as well as short-chain fattyacids and carboxylic acids. In this work, technologies and processes demanding the production of value-added products were explained in detail to understand and inculcate the value of municipal solid wastes and the economy, and it can provide to the biorefinery aspect.

Advancement of biorefinery-derived platform chemicals from macroalgae: a perspective for bioethanol and lactic acid

The extensive growth of energy and plastic demand has raised concerns over the depletion of fossil fuels. Moreover, the environmental conundrums worldwide integrated with global warming and improper plastic waste management have led to the development of sustainable and environmentally friendly biofuel (bioethanol) and biopolymer (lactic acid, LA) derived from biomass for fossil fuels replacement and biodegradable plastic production, respectively. However, the high production cost of bioethanol and LA had limited its industrial-scale production. This paper has comprehensively reviewed the potential and development of third-generation feedstock for bioethanol and LA production, including significant technological barriers to be overcome for potential commercialization purposes. Then, an insight into the state-of-the-art hydrolysis and fermentation technologies using macroalgae as feedstock is also deliberated in detail. Lastly, the sustainability aspect and perspective of macroalgae biomass are evaluated economically and environmentally using a developed cascading system associated with techno-economic analysis and life cycle assessment, which represent the highlights of this review paper. Furthermore, this review provides a conceivable picture of macroalgae-based bioethanol and lactic acid biorefinery and future research directions that can be served as an important guideline for scientists, policymakers, and industrial players.

Graphical abstract

Valorisation of algal biomass to value-added metabolites: emerging trends and opportunities

Algal biomass is a promising feedstock for sustainable production of a range of value-added compounds and products including food, feed, fuel. To further augment the commercial value of algal metabolites, efficient valorization methods and biorefining channels are essential. Algal extracts are ideal sources of biotechnologically viable compounds loaded with anti-microbial, anti-oxidative, anti-inflammatory, anti-cancerous and several therapeutic and restorative properties. Emerging technologies in biomass valorisation tend to reduce the significant cost burden in large scale operations precisely associated with the pre-treatment, downstream processing and waste management processes. In order to enhance the economic feasibility of algal products in the global market, comprehensive extraction of multi-algal product biorefinery is envisaged as an assuring strategy. Algal biorefinery has inspired the technologists with novel prospectives especially in waste recovery, carbon concentration/sequestration and complete utilisation of the value-added products in a sustainable closed-loop methodology. This review critically examines the latest trends in the algal biomass valorisation and the expansive feedstock potentials in a biorefinery perspective. The recent scope dynamics of algal biomass utilisation such as bio-surfactants, oleochemicals, bio-stimulants and carbon mitigation have also been discussed. The existing challenges in algal biomass valorisation, current knowledge gaps and bottlenecks towards commercialisation of algal technologies are discussed. This review is a comprehensive presentation of the road map of algal biomass valorisation techniques towards biorefinery technology. The global market view of the algal products, future research directions and emerging opportunities are reviewed.

Hydrothermal systems to obtain high value-added compounds from macroalgae for bioeconomy and biorefineries

The search of sustainable and environmentally friendly alternatives to obtain compounds for different industrial sectors has grown exponentially. Following the principles of biorefinery and circular bioeconomy, processes in which the use of natural resources such as macroalgae biomass is prioritized are required. This review focuses on a description of the relevance, application and engineering platforms of hydrothermal systems and the operational conditions depending on the target as an innovative technology and bio-based solution for macroalgae fractionation in order to recover profitable products for industries and investors. In this sense, hydrothermal treatments represent a promising alternative for obtaining different high value-added compounds from this biomass; since, the different variations in terms of operating conditions, gives great versatility to this technology compared to other types of processing, allowing it to be adapted depending on the objective, whether it is working under sub/super critical conditions, thus expanding its field of application.

Third-generation L-Lactic acid production by the microwave-assisted hydrolysis of red macroalgae Eucheuma denticulatum extract

The development of an efficient third-generation L-lactic acid (L-LA) production process from Eucheuma denticulatum extract (EDE) was achieved in this study. Microwave-assisted dilute acid hydrolysis (MADAH) and microwave-assisted hydrothermal hydrolysis (MAHTH) were chosen as the hydrolysis of EDE for the objective of increasing galactose yield. Single-factor optimization of hydrolysis of the EDE was studied, MADAH had high performance in galactose production relative to MAHTH, in which the yield and optimal conditions for both processes were 50.7% (0.1 M H₂SO₄, 120 °C for 25 min) and 47.8% (0 M H₂SO₄,160 °C for 35 min), respectively. For fermentation, the optimal L-LA yield was achieved at the inoculum cell density of 4% (w/w) Bacillus coagulans ATCC 7050 with 89.4% and 6% (w/w) Lactobacillus acidophilus LA-14 with 87.6%. In addition, lipid-extracted Chlorella vulgaris residues (CVRs) as co-nutrient supplementation increased the relative abundance of B. coagulans ATCC 7050, thus benefiting L-LA production.

An overview of D-galactose utilization through microbial fermentation and enzyme-catalyzed conversion

D-Galactose is an abundant carbohydrate monomer in nature and widely exists in macroalgae, plants, and dairy wastes. D-Galactose is useful as a raw material for biomass fuel production or low-calorie sweetener production, attracting increased attention. This article summarizes the studies on biotechnological processes for galactose utilization. Two main research directions of microbial fermentation and enzyme-catalyzed conversion from galactose-rich biomass are extensively reviewed. The review provides the recent discoveries for biofuel production from macroalgae, including the innovative methods in the pretreatment process and technological development in the fermentation process. As modern people pay more attention to health, enzyme technologies for low-calorie sweetener production are more urgently needed. D-Tagatose is a promising low-calorie alternative to sugar. We discuss the recent studies on characterization and genetic modification of L-arabinose isomerase to improve the bioconversion of D-galactose to D-tagatose. In addition, the trends and critical challenges in both research directions are outlined at the end. KEY POINTS: • The value and significance of galactose utilization are highlighted. • Biofuel production from galactose-rich biomass is accomplished by fermentation. • L-arabinose isomerase is a tool for bioconversion of D-galactose to D-tagatose.

High-pressure technology for Sargassum spp biomass pretreatment and fractionation in the third generation of bioethanol production

Sargassum spp is an invasive macroalgae and an alternative feedstock for bioethanol production. Sargassum spp biomass was subjected to high-pressure technology for biomass fractionation under different operating conditions of temperature and residence time to obtain glucan enriched pretreated solids (32.22 g/100 g of raw material). Enzyme hydrolysis process at high pretreated solid loading (13%, w/v) and enzyme loading of 10 FPU/g of glucan was performed, obtaining 43.01 g/L of glucose corresponding to a conversion yield of 92.12%. Finally, a pre-simultaneous saccharification and fermentation strategy (PSSF) was performed to produce bioethanol. This operational strategy produced 45.66 g/L of glucose in the pre-saccharification stage, and 18.14 g/L of bioethanol was produced with a glucose to bioethanol conversion yield of 76.23%. The development of this process highlights the feasibility of bioethanol production from macroalgal biomass in the biorefinery concept.

Valorization of pelagic sargassum biomass into sustainable applications: Current trends and challenges

Since long ago, pelagic Sargassum mats have been known to be abundant in the Sargasso Sea, where they provide habitat to diverse organisms. However, over the last few years, massive amounts of pelagic Sargassum have reached the coast of several countries in the Caribbean and West Africa, causing economic and environmental problems. Aiming for lessening the impacts of the blooms, governments and private companies remove the seaweeds from the shore, but this process results expensive. The valorization of this abundant biomass can render Sargassum tides into an economic opportunity and concurrently solve their associated environmental problems. Despite the diverse fields where algae have found applications and the relevance of this recurrent situation, Sargassum biomass remains without large scale applications. Therefore, this review aims to present the potential uses of these algae, identifying the limitations that must be assessed to effectively valorize this bioresource. Due to the constraints identified for each of the presented applications, it is concluded that a biorefinery approach should be developed to effectively valorize this abundant biomass. However, there is an urgent need for investigations focusing on holopelagic Sargassum to be able to truly valorize this seaweed.

Advances in Extraction Methods to Recover Added-Value Compounds from Seaweeds: Sustainability and Functionality

Seaweeds are a renewable natural source of valuable macro and micronutrients that have attracted the attention of the scientists in the last years. Their medicinal properties were already recognized in the ancient traditional Chinese medicine, but only recently there has been a considerable increase in the study of these organisms in attempts to demonstrate their health benefits. The extraction process and conditions to be used for the obtention of value-added compounds from seaweeds depends mainly on the desired final product. Thermochemical conversion of seaweeds, using high temperatures and solvents (including water), to obtain high-value products with more potential applications continues to be an industrial practice, frequently with adverse impact on the environment and products’ functionality. However more recently, alternative methods and approaches have been suggested, searching not only to improve the process performance, but also to be less harmful for the environment. A biorefinery approach display a valuable idea of solving economic and environmental drawbacks, enabling less residues production close to the much recommended zero waste system. The aim of this work is to report about the new developed methods of seaweeds extractions and the potential application of the components extracted.

Bioethanol from hydrolyzed Spirulina (Arthrospira platensis) biomass using ethanologenic bacteria

Photosynthetic microorganisms are considered excellent feedstock for biofuel production in developing biomass production technologies. A study was conducted to evaluate ethanol production with the sequential enzymatic saccharification and fermentation of Arthrospira platensis (Spirulina) biomass with the metabolically engineered Escherichia coli strain MS04. A. platensis was cultivated semicontinuously in an open raceway pond, and the carbohydrate content was determined to be as high as 40%. The enzymatic saccharification was designed to release the maximum amount of glucose. After 40 h of enzymatic saccharification, 27 g L−1 of monosaccharides was obtained. These slurries were fermented with ethanologenic bacteria, achieving 12.7 g L−1 ethanol after 9 h of fermentation, which corresponds to 92% conversion yield of the glucose content in the hydrolysate, 0.13 g of ethanol per 1 g of Spirulina biomass and a volumetric productivity of 1.4 g of ethanol L−1 h−1. Therefore, we conclude that it is possible, in a short time, to obtain a high ethanol yield corresponding to 160 L per ton of dry biomass with a high productivity.

Research on catalytic pyrolysis of algae based on Py-GC/MS

In order to improve the quality of catalysis products of algae, composite molecular sieve catalyst was prepared by digestion and crystallization of HZSM-5 to reduce the oxygen content of the catalytic products. According to the analysis of the pyrolysis products, the best preparation conditions were chosen of tetra propylammonium hydroxide (TPAOH) solution 2.0 mol l-1, cetyltrimethylammonium bromide (CTAB) solution 10 wt%, crystallization temperature 110°C, digestion-crystallization time: 24-24 h. The results indicate that the main function of catalysts is to promote the conversion of alcohols into hydrocarbons by reducing energy barriers. Catalysed by the composite molecular sieve, the content of alcohols in the pyrolysis products decreased from more than 30% to less than 10%, the content of hydrocarbons increased from 20% to nearly 60%, while all the adverse components remained at a low level, which indicates that the catalytic pyrolysis products are of high quality. The great deoxidation effect of composite molecular sieves is not only due to the expansion of the range of organic matter during re-pyrolysis, but also the increasing of the residence time of pyrolysis products inside the structure for the external mesoporous structure.