Development trend and prospect of solid phase extraction technology

Porous organic polymers for selective enrichment of trace Cu(ii) in food and water samples

Porous organic polymers (POPs) were synthesized by polymerization of benzene triamine and trimesoyl chloride. The POP material is water-stable and shows selective extraction of Cu(ii) due to its intrinsic nitrogen-rich surface, which forms a chelate with Cu(ii) ions. The prepared polymeric material was characterized through Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray elemental mapping, and scanning electron microscopy for surface group analysis and structural morphology studies. A microcolumn was developed using POPs for the preconcentration of trace Cu(ii) from complex real samples. The proposed method shows a high enrichment factor of 900 and a quantification limit of 1.1 ppb for Cu(ii) ions. The accuracy of the developed method was confirmed by analyzing standard reference materials (NIES 8 and NIES 10c) and the standard addition method. The method shows good precision with an RSD value of less than 5%.

Trends in extraction and purification methods of Lignans in plant-derived foods

Lignans are widely used as dietary supplements within health foods. However, excess addition of lignans can induce adverse reactions, therefore, it is necessary to develop rapid, effective, economical, and environmentally friendly extraction and purification methods to enhance lignan extraction efficiency. Recently, the advancement of sample pretreatment has been primarily directed towards the application of novel extraction solvents (e.g., supramolecular solvents) in dispersive liquid-liquid microextraction, the miniaturization of solid-phase extraction, the utilization of innovative adsorbent materials in dispersive solid-phase microextraction and matrix-assisted solid-phase extraction, and the employment of subcritical water extraction technology. Up to now, no systematic review has encompassed these advancements. Consequently, this review provides a comprehensive overview of the extraction and purification methods of lignans from plant-derived foods since 2017, with a particular focus on the application of microextraction technologies and new materials. It also analyzes the advantages and disadvantages of these methods and discusses their future developing trends.

Highly sensitive detection of mercury ions in aqueous solutions by laser-induced fluorescence spectroscopy

Laser-induced fluorescence spectroscopy was used to detect mercury ions in aqueous solutions, in which CH-95 resin was used to chelate the ions to transform the liquid samples into solid ones. The experimental results showed that the fluorescence emission of the chelated solid-state samples excited by a low-power semiconductor laser at the wavelength of 447 nm was significantly enhanced due to the chelating reaction. The fluorescence intensity was proportional to the concentration of mercury ions with a linear correlation coefficient of R2  = 0.994, and the limit of detection was 0.117 ng/L, which was about 10,000 times lower than the permissible level of 1 µg/L for Hg(II) in drinking water. The method greatly improved the sensitivity for the detection of Hg in aqueous solutions.

Characterising the change rule of freshness and inorganic anions in reconstituted tobacco pulp with oscillation time

In order to study the change rule of freshness and acid ions in reconstituted tobacco slurry, the content changes of 17 organic acids and 5 inorganic anions in reconstituted tobacco slurry with different residence times under confined condition were determined by on-line solid-phase extraction ion chromatography in this study. The results showed that the changes of acetic acid, nitrate ion and isovaleric acid in different reconstituted tobacco slurries with oscillation time were regular and consistent, and the trends of the changes of acetic acid, nitrate ion and isovaleric acid in different reconstituted tobacco slurries with oscillation time were correlated with each other in a highly significant way. Taking the evaluation of olfactory aroma and sensory quality qualities of reconstituted tobacco pulps with different residence times as a benchmark, it was found that the variation patterns of nitrate ions and isovaleric acid in reconstituted tobacco pulps with oscillation time were consistent with the variation patterns of olfactory and sensory qualities in the process of closed oscillation; compared with the fresh pulp, the olfactory aroma and sensory qualities of tobacco pulps had unpleasant odours appearing when the content of nitrate ions was reduced by about 48%. The selection of isovaleric acid and nitrate ion as the characteristic components of tobacco reconstituted pulp for monitoring can provide technology for optimising pulp retention time and production process.

Understanding LC/MS-Based Metabolomics: A Detailed Reference for Natural Product Analysis

Liquid chromatography, when used in conjunction with mass spectrometry (LC/MS), is a powerful tool for conducting accurate and reproducible investigations of numerous metabolites in natural products (NPs). LC/MS has gained prominence in metabolomic research due to its high throughput, the availability of multiple ionization techniques and its ability to provide comprehensive metabolite coverage. This unique method can significantly influence various scientific domains. This review offers a comprehensive overview of the current state of LC/MS-based metabolomics in the investigation of NPs. This review provides a thorough overview of the state of the art in LC/MS-based metabolomics for the investigation of NPs. It covers the principles of LC/MS, various aspects of LC/MS-based metabolomics such as sample preparation, LC modes, method development, ionization techniques and data pre-processing. Moreover, it presents the applications of LC/MS-based metabolomics in numerous fields of NPs research such as including biomarker discovery, the agricultural research, food analysis, the study of marine NPs and microbiological research. Additionally, this review discusses the challenges and limitations of LC/MS-based metabolomics, as well as emerging trends and developments in this field.

Removal and measurement of trace amounts of rhodamine B in aqueous samples based on the synthesis of a nanosorbent composed of Fe3O4 nanoparticles modified with SiO2 and polydopamine by magnetic solid phase extraction

Rhodamine B (RDB) dye is generally toxic and causes problems such as carcinogenic activities, neurological disorders, and respiratory tract irritations. However, some individuals still illegally use RDB as a food additive. Therefore, a simple and accurate method is needed to determine RDB in real samples such as food or cosmetic products. In this study, the magnetic solid phase extraction (MSPE) method was used to measure very low amounts of RDB dye in water samples. The advantages of this method include simplicity, good repeatability, high preconcentration factor, higher extraction efficiency, low organic solvent volume requirement, rapid separation, low cost, high sensitivity, and interference removal compared to other methods. Within this approach, iron oxide nanoparticles were synthesised, followed by the application of tetra ethoxy silane (TEOS) and polydopamine (PDA) coatings on the nanoparticle surface, resulting in the creation of the Fe3O4@SiO2@PDA nano-sorbent. This nano-sorbent was then utilized as the magnetic solid phase in MSPE. The characteristics of the synthesized compounds were investigated by various methods such as infrared Fourier transform spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and vibrating sample magnetometry (VSM). Response surface methodology (RSM) and Box-Behnken (BB) design were used to optimize the variables affecting the adsorption process and achieved high recovery percentages. Under optimal experimental conditions, the detection limit and quantification limit of the method were found to be 0.73 and 2.42 μg L-1 for RDB, respectively, with RSDs of ±0.32% and ±0.67%. Furthermore, the linear concentration range of the proposed method for solid phase extraction of RDB was determined to be 10.0-900.0 μg L-1. Moreover, the recovery rates for tap water, lake water, and well water samples ranged from 96.9% to 98.6%.

Enhancing Analytical Potential for Ultratrace Analysis of Inorganic Oxyanions Using Extraction Procedures with Layered Double Hydroxides

This article provides an overview of the use of layered double hydroxides (LDHs) as effective sorbents in various extraction methods, including column-based solid-phase extraction (SPE), dispersive solid-phase extraction (DSPE), and magnetic solid-phase extraction (MSPE), for the separation and preconcentration of inorganic oxyanions of chromium, arsenic, and selenium. The primary focus is on enhancing the analytical performance of spectrometric detection techniques, particularly in terms of sensitivity and selectivity when analyzing low concentrations of target analytes in complex matrices. LDHs, which can be readily prepared and structurally modified with various substances, offer promising potential for the development of novel analytical methods. When used in analytical extraction procedures and following careful optimization of experimental conditions, the developed methods have yielded satisfactory results, as documented by studies reviewed in this paper. This review is intended to assist analytical chemists in scientific laboratories involved in developing new extraction procedures.

Advancements in effervescent-assisted dispersive micro-solid phase extraction for the analysis of emerging pollutants

Emerging pollutants pose an increasing threat to the environment and human well-being, requiring substantial progress in analytical methodologies. Dispersive micro-solid phase extraction (μ-dSPE) has proven successful in detecting and measuring these contaminants, particularly in trace quantities. However, challenges persist in achieving a uniform sorbent distribution and efficient separation from the sample matrix. To address these issues, effervescent-assisted dispersive micro-solid phase extraction (EA-μ-dSPE) was developed. This method uses on-site produced carbon dioxide as a dispersing agent, eliminating the need for vortexing or ultrasonication. Due to the sorbent dispersion in the sample solution, the contact surface between the analyte and the sorbent increases, resulting in increased extraction efficiency, reduced extraction time, and promotes of sustainability. Several parameters are critical to the successful execution of this procedure to extract the analytes, including the type and structure of sorbent, composition of dispersing agents, sorbent separation procedure, and type and properties of desorption solvents. The sorbent plays a critical role in successful extraction of emerging pollutants. It is clear that for the extraction of the analyte on the sorbent, proper interaction must be established between the analyte and the sorbent via physical and chemical interactions. This review thoroughly evaluates the underlying principles of the approach, its potential, and the significant advancements that have been documented. It explores the method's capacity to analyse and identify emerging pollutants, emphasising its potential across various sample matrices for enhanced pollutant identification and quantification.

Overview of Liquid Sample Preparation Techniques for Analysis, Using Metal-Organic Frameworks as Sorbents

The preparation of samples for instrumental analysis is the most essential and time-consuming stage of the entire analytical process; it also has the greatest impact on the analysis results. Concentrating the sample, changing its matrix, and removing interferents are often necessary. Techniques for preparing samples for analysis are constantly being developed and modified to meet new challenges, facilitate work, and enable the determination of analytes in the most comprehensive concentration range possible. This paper focuses on using metal-organic frameworks (MOFs) as sorbents in the most popular techniques for preparing liquid samples for analysis, based on liquid-solid extraction. An increase in interest in MOFs-type materials has been observed for about 20 years, mainly due to their sorption properties, resulting, among others, from the high specific surface area, tunable pore size, and the theoretically wide possibility of their modification. This paper presents certain advantages and disadvantages of the most popular sample preparation techniques based on liquid-solid extraction, the newest trends in the application of MOFs as sorbents in those techniques, and, most importantly, presents the reader with a summary, which a specific technique and MOF for the desired application. To make a tailor-made and well-informed choice as to the extraction technique.

Engineering of dual recognition functional aptamer-molecularly imprinted polymeric solid-phase microextraction for detecting of 17β-estradiol in meat samples

In this study, an enhanced selective recognition strategy was employed to construct a novel solid-phase microextraction fiber coating for the detection of 17β-estradiol, characterized by the combination of aptamer biorecognition and molecularly imprinted polymer recognition. Benefiting from the combination of molecularly imprinted and aptamer, aptamer-molecularly imprinted (Apt-MIP) fiber coating had synergistic recognition effect. The effects of pH, ion concentration, extraction time, desorption time and desorption solvent on the adsorption capacity of Apt-MIP were investigated. The adsorption of 17β-estradiol on Apt-MIP followed pseudo-second order kinetic model, and the Freundlich isotherm. The process was exothermic and thermodynamically spontaneous. Compared with polymers that only rely on imprinted recognition, non-imprinted recognition or aptamer affinity, Apt-MIP had the best recognition performance, which was 1.30-2.20 times that of these three materials. Furthermore, the adsorption capacity of Apt-MIP for 17β-estradiol was 885.36-1487.52 times than that of polyacrylate and polydimethylsiloxane/divinylbenzone commercial fiber coatings. Apt-MIP fiber coating had good stability and could be reused for more than 15 times. Apt-MIP solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the determination of 17β-estradiol in pork, chicken, fish and shrimp samples, with satisfactory recoveries of 79.61 %-105.70 % and low limits of detection (0.03 μg/kg). This work provides new perspectives and strategies for sample pretreatment techniques based on molecular imprinting technology and improves analytical performance.

Novel Application of Metal-Organic Frameworks as Efficient Sorbents for Solid-Phase Extraction of Chemical Warfare Agents and Related Compounds in Water Samples

In this work, we test metal-organic frameworks (MOFs) as sorbents in the solid-phase extraction (SPE) technique to determine chemical warfare agents (CWAs) and their related compounds in water samples. During this study, we used 13 target compounds to test the selectivity of MOFs thoroughly. Three MOFs were used: MIL-100(Fe), ZIF-8(Zn), and UiO-66(Zr). The obtained materials were characterized using FT-IR/ATR, SEM, and XRD. CWA's and related compounds were analyzed using gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). The effect of the type of elution solvent and the amount of sorbent (MOFs) in the column on the efficiency of the conducted extraction were verified. The LOD ranged from 0.04 to 7.54 ng mL-1, and the linearity range for the analytes tested extended from 0.11/22.62 (depending on the compound) to 1000 ng mL-1. It was found that MOFs showed the most excellent selectivity to compounds having aromatic rings in their structure or a "spread" spatial structure. The best recoveries were obtained for DPAA, CAP, and malathion. Environmental water samples collected from the Baltic Sea were analyzed using an optimized procedure to verify the developed method's usefulness.

Advancements and greenification potential of magnetic molecularly imprinted polymers for chromatographic analysis of veterinary drug residues in milk

Milk, as a widely consumed nutrient-rich food, is crucial for bone health, growth, and overall nutrition. The persistent application of veterinary drugs for controlling diseases and heightening milk yield has imparted substantial repercussions on human health and environmental ecosystems. Due to the high demand, fresh consumption, complex composition of milk, and the potential adverse impacts of drug residues, advanced greener analytical methods are necessitated. Among them, functional materials-based analytical methods attract wide concerns. The magnetic molecularly imprinted polymers (MMIPs), as a kind of typical functional material, possess excellent greenification characteristics and potencies, and they are easily integrated into various detection technologies, which have offered green approaches toward analytes such as veterinary drugs in milk. Despite their increasing applications and great potential, MMIPs' use in dairy matrices remains underexplored, especially regarding ecological sustainability. This work reviews recent advances in MMIPs' synthesis and application as efficient sorbents for veterinary drug extraction in milk followed by chromatographic analysis. The uniqueness and effectiveness of MMIPs in real milk samples are evaluated, current limitations are addressed, and greenification opportunities are proposed. MMIPs show promise in revolutionizing green analytical procedures for veterinary drug detection, aligning with the environmental goals of modern food production systems.

Development of a three-dimensional porous ionic liquid-chitosan-graphene oxide aerogel for efficient extraction and detection of polyhalogenated carbazoles in sediment samples

The three-dimensional porous ionic liquid-chitosan-graphene oxide aerogel (IL-CS-GOA) monolithic adsorbent with a through-hole structure was prepared using natural chitosan (CS) as the skeletal framework, graphene oxide (GO) as the support to provide mechanical strength, and ionic liquid (IL) as the porogen and modifier. The resulting IL-CS-GOA demonstrated a fluffy and porous structure with various pore sizes and excellent regeneration capability (over six cycles). Its specific surface area exceeded that of CS-GOA and IL-GOA by more than 7 times, enhancing its polyhalogenated carbazoles (PHCZs) adsorption capacity. Within 5 min, IL-CS-GOA (1.0 mg) exhibited adsorption amounts of 539 ng mg-1 for 3-bromocarbazole (3-BCZ), 716 ng mg-1 for 2,7-dibromocarbazole (2,7-BCZ), and 798 ng mg-1 for 1,3,6,8-tetrabromocarbazole (1,3,6,8-BCZ), showcasing its rapid mass transfer and high adsorption capabilities. IL-CS-GOA was utilized as the adsorbent for glass dropper extraction (GDE) in conjunction with gas chromatography-mass spectrometry (GC-MS/MS), to develop a highly efficient and accurate method for determining PHCZs in sediments. Under optimal conditions, the established method exhibited a wide linear range (0.4-250 ng g-1, r ≥ 0.9990), low detection limits (0.04-0.24 ng g-1), and satisfactory recoveries (80.5 %-93.8 %), enabling the accurate and rapid detection of PHCZs in sediment samples. This study presents a novel approach for creating three-dimensional porous aerogels, introduces a new form of sample pretreatment using GDE with a monolithic adsorbent, and offers a new method for the determination of PHCZs in environmental matrices.

Investigation of Health Effects of Major Phenolic Compounds in Foods: Extraction Processes, Analytical Approaches and Applications

The escalating costs of healthcare services and a growing awareness of personal health responsibilities have led individuals to explore natural methods alongside conventional medicines for health improvement and disease prevention. The aging global population is experiencing increased health needs, notably related to conditions like diabetes, heart disease, and hypertension. Lifestyle-related diseases, poor dietary habits, and sedentary lifestyles underscore the importance of foods containing nutrients that can aid in preventing and managing these diseases. Phenolic compounds, a fundamental group of phytochemicals, are prominent in the chemical diversity of the natural world and are abundant in functional foods. Widely distributed in various plant parts, these compounds exhibit important functional and sensory properties, including color, taste, and aroma. Their diverse functionalities, particularly antioxidant activity, play a crucial role in mitigating cellular oxidative stress, potentially reducing damage associated with serious health issues such as cardiovascular disease, neurodegenerative disea23ses, and cancer. Phenolic compounds exist in different forms, some combined with glycosides, impacting their biological effects and absorption. Approximately 8000 polyphenols isolated from plants offer significant potential for natural medicines and nutritional supplements. Therefore, their extraction process and selective and sensitive food determination are very important. This review focuses on the extraction processes, analytical methods, and health effects of major phenolic compounds in foods. The examination encompasses a comprehensive analysis of analytical approaches and their applications in elucidating the presence and impact of these compounds on human health.

Magnetic Covalent Organic Framework for Efficient Solid-Phase Extraction of Uranium for on-Site Determination by Portable X-ray Fluorescence Spectrometry

Uranium plays a pivotal role in the nuclear industry; however, its inadvertent release has raised concerns regarding health and environmental implications. It is crucial for a prompt warning and accurate tracing of uranium contamination in emergency scenarios. In this study, a novel and simple method was proposed that combines magnetic dispersive solid-phase extraction (MDSPE) with portable X-ray fluorescence spectrometry (XRF) for the on-site sampling and determination of trace uranium in real samples. A magnetic covalent organic framework (Fe3O4@COF) composite with excellent chemical stability and a large adsorption capacity of 311 mg/g was synthesized and employed as an efficient adsorbent for the solid-phase extraction of trace uranium. Without the need for a centrifuge or filter requirement, the established method by benchtop wavelength-dispersive X-ray fluorescence spectrometry (WDXRF) exhibits an exceptionally low limit of detection (LOD) of 0.008 μg/L with a sample volume of 50 mL and a fast adsorption time of 15 min, rendering it suitable for environmental monitoring of UO22+. Consequently, this approach, in combination with a hand-held portable XRF instrument with an LOD of 0.1 μg/L, was successfully implemented for the on-site extraction and quality assessment of real water samples, yielding accurate results and satisfactory spike recoveries.

A novel sample pretreatment of nanofiber-packed solid-phase extraction of aflatoxin B1, B2, G1 and G2 in foods and simultaneous determination with HPLC

A novel analytical method based on nanofiber-packed solid-phase extraction (PFSPE) combined with HPLC-FLD has been successfully developed and applied to determine aflatoxin B1, B2, G1, G2 in foods. In order to effectively adsorb analytes from complex food matrices, four types of nanofibers based on skeleton of polystyrene-polyvinyl pyrrolidone were prepared by electrospinning and applied as adsorbent to home-made solid-phase extraction device. The effects of type of nanofibers, pH of sample, type and concentration of salt ion, type of activation solvent, type and volume of eluent, amount of nanofibers, and extraction time on the adsorption/desorption were investigated and optimized. Under optimal conditions, the method showed satisfactory linear relationship, with limits of detection (LODs) of 0.07-0.17 ng g-1, intra-day and inter-day RSDs for spiked samples of 1.3-8.0 % and 1.9-5.8 %, and absolute recoveries in the range of 60.1-98.4 %. The results presented the great potential to be utilized to determine AFs in foodstuffs.

High-throughput analytical methodology of monoalkyl phthalate esters and the composite risk assessment with their parent phthalate esters in aquatic organisms and seawater

A sensitive, robust, and highly efficient analytical methodology involving solid phase extraction coupled to ultra-high performance liquid chromatography tandem mass spectrometry was successfully established to detect 13 monoalkyl phthalate esters (MPAEs) in aquatic organisms and seawater. After the organisms were preprocessed using enzymatic deconjugation with β-glucuronidase, extraction, purification, and qualitative and quantitative optimization procedures were performed. Under optimal conditions, the limits of detection varied from 0.07 to 0.88 μg/kg (wet weight) and 0.04-1.96 ng/L in organisms and seawater, respectively. Collectively, MPAEs achieved acceptable recovery values (91.0-102.7%) with relative standard deviations less than 10.4% and matrix effects ranging from 0.93 to 1.07 in the above matrix. Furthermore, MPAEs and phthalate esters were detected by the developed methodology and gas chromatography-triple quadrupole tandem mass spectrometer in practical samples, respectively. Mono-n-butyl phthalate and mono-iso-butyl phthalate were the most predominant congeners, accounting for 24.8-35.2% in aquatic organisms and seawater. Comprehensive health and ecological risks were higher after the MPAEs were incorporated than when phthalate esters were considered separately, and greater than their risk threshold. Therefore, the risks caused by substances and their metabolites in multiple media, with analogous structure-activity relationships, should be considered to ensure the safety of aquatic organisms and consumers.

Fe3O4@nitrogen-doped carbon core-double shell nanotubes as a novel and efficient nanosorbent for ultrasonic assisted dispersive magnetic solid phase extraction of heterocyclic pesticides from environmental soil and water samples

Fe3O4@nitrogen-doped carbon core-double shell nanotubes (Fe3O4@N-C C-DSNTs) were successfully synthesized and applied as a novel nanosorbent in ultrasonic assisted dispersive magnetic solid phase extraction (UA-DMSPE) of tribenuron-methyl, fenpyroximate, and iprodione. Subsequently, corona discharge ion mobility spectrometry (CD-IMS) was employed for the detection of the extracted analytes. Effective parameters on the extraction recovery percentage (ER%) were systematically investigated and optimized. Under optimal conditions, UA-DMSPE-CD-IMS demonstrated remarkable linearity in different ranges within 1.0 - 700 ng mL-1 with correlation coefficients exceeding 0.993, repeatability values below 6.9%, limits of detection ranging from 0.30 to 0.90 ng mL-1, high preconcentration factors (418 - 435), and ER% values (83 - 87%). The potential of the proposed method was further demonstrated by effectively determining the targeted pesticides in various environmental soil and water samples, exhibiting relative recoveries in the range 92.1 - 102%.

Simultaneous determination of three biomarkers of non-small cells lung cancer in urine by pipette-tip solid-phase extraction coupled with liquid chromatography tandem mass spectrometry

Simultaneous determination of multiple biomarkers can improve the effectiveness and accuracy of cancer diagnosis. Cortisol, cortisone, and 4-methoxyphenylacetic acid (4-Me) are metabolic biomarker group with high specificity and sensitivity for the diagnosis of non-small cells lung cancer (NSCLC), and the development of their simultaneous determination method is desired. Herein, a simple, sensitive, and low-cost method involving pipette-tip solid-phase extraction (PT-SPE) using anion exchange adsorbent (MAX) coupled with liquid chromatography tandem mass spectrometry (LC-MS/MS) was developed for the simultaneous determination of three biomarkers (cortisol, cortisone, and 4-Me) in human urine. The sample (0.1 mL), adsorbent (1.5 mg) and organic reagent (3.5 mL) of MAX-PT-SPE are less consumed, and have the advantages of easy access to raw materials, simple assembly, convenient on-site instant extraction, low pollution, and low cost. The limits of detection of the three biomarkers were 0.006-0.024 ng mL-1, the recoveries of three spiked levels (2, 50, and 500 ng mL-1) were 91.0%-99.3%, with the relative standard deviations (RSDs) ≤ 5.9%. Finally, the MAX-PT-SPE-LC-MS/MS method achieved the quantitative analysis of cortisol, cortisone, and 4-Me in urine of different patients of NSCLC. This method is expected to be used in the non-invasive auxiliary diagnosis of NSCLC, and it provides a new strategy for multi-molecular diagnosis and multi-omics combined diagnosis.

Th6-Based Multicomponent Heterometallic Metal-Organic Frameworks Featuring 6,12-Connected Topology for Iodine Adsorption

Its high coordination number and tendency to cluster make Th4+ suitable for constructing metal-organic frameworks (MOFs) with novel topologies. In this work, two novel thorium-based heterometallic MOF isomers (IHEP-17 and IHEP-18) were assembled from a Th6 cluster, a multifunctional organic ligand [4-(1H-pyrazol-4-yl)benzoic acid (HPyba)], and Cu2+/Ni2+ cations via the one-pot solvothermal synthesis strategy. The framework features a 6,12-connected new topology net and contains two kinds of supramolecular cage structures, Th36M4 and Th24M2, suitable for guest exchange. Both MOF materials can efficiently adsorb I2. X-ray photoelectron spectroscopy, Raman spectroscopy, and single-crystal X-ray diffraction indicate that the adsorbed iodine is uniformly distributed within the Th36M4 cage but not the Th24M2 cage in the form of I3-.

Solid-phase immunoextraction followed by liquid chromatography-tandem mass spectrometry for the selective determination of thyroxine in human serum

In this work, an analytical method based on solid-phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry analysis (LC-MS/MS) has been developed for the selective determination of thyroxine (T4) in human serum. For this purpose, two immunosorbents (ISs) specific to T4 were synthesized by grafting two different T4-specific monoclonal antibodies on a cyanogen bromide (CNBr)-activated-Sepharose® 4B solid support. The grafting yields obtained from the immobilization of each antibody on the CNBr-activated-Sepharose® 4B were over 90%, demonstrating that most of the antibodies were covalently bound to the solid support. The SPE procedure was optimized by studying the retention capability and selectivity of the two ISs in pure media fortified with T4. Under the optimized conditions, high elution efficiencies were achieved in the elution fraction for both specific ISs (i.e., 85%), whereas low ones were obtained in the control ISs (ca. 2%), showing the selectivity of the specific ISs. The ISs were also characterized by studying extraction and synthesis repeatability (RSD <8%), and capacity (104 ng of T4 per 35 mg of ISs, i.e., 3 μg g^-1). Finally, the methodology was applied to a pooled human serum sample in order to study its analytical utility and accuracy. Relative recovery (RR) values between 81 and 107% were obtained, showing no matrix effects during the global methodology. Furthermore, the need to perform the immunoextraction was evidenced by comparing the LC-MS scan chromatograms and RR values with and without applying the immunoextraction procedure on a serum sample submitted to protein precipitation. This works exploits, for the first time, the use of an IS on the selective determination of T4 in human serum samples.

Covalently Functionalized Cellulose Nanoparticles for Simultaneous Enrichment of Pb(II), Cd(II) and Cu(II) Ions

Cellulose nanoparticles are sustainable natural polymers with excellent application in environmental remediation technology. In this work, we synthesized cellulose nanoparticles and covalently functionalized them with a multi-functional group possessing ligands. The hybrid material shows excellent adsorption properties for the simultaneous extraction of multiple metal ions in the sample preparation technique. The sorbent shows excellent sorption capacity in the range of 1.8-2.2 mmol/g of material. The developed method was successfully employed for the simultaneous extraction of Pb(II), Cd(II) and Cu(II) from real-world samples (industrial effluent, river water, tap and groundwater) and subsequently determined by inductively coupled plasma optical emission spectroscopy (ICP-OES). The method shows a preconcentration limit of 0.7 ppb attributes to analyze the trace concentration of studied metal ions. The detection limit obtained for Pb(II), Cd(II) and Cu(II) is found to be 0.4 ppb.

Graphene Oxide Deposited with Transition Metal Chalcogenide for Selective Extraction and Determination of Hg(II): Experimental and Computational Analysis

A graphene oxide (GO/CdS) nanocomposite was synthesized by an in situ hydrothermal process and studied to develop a micro solid phase extraction procedure. Microscopic and spectroscopic characterizations have confirmed the successful preparation of the GO/CdS composite. The prepared nanocomposite selectively extracts Hg(II) ions from various water samples (tap, river, and groundwater). The intriguing characteristic of GO sheets is to provide exceptional hydrophilicity and Hg(II) accessibility to surface-decorated CdS nanoparticles. The GO/CdS nanocomposite shows excellent extraction of trace Hg(II) in a short interval of time. Computations based on density functional theory (DFT) suggest that energetically favorable multinuclear S-Hg binding leads to rapid adsorption with high sorption capacity at GO/CdS sites. The analytical features of merit suggested that the developed method has a low detection limit (0.07 µg L^-1) and shows good accuracy and precision (with RSD 3.5%; N = 5). The developed method was verified by analyzing SRM 1641d (Standard Reference Material) and real samples after spiking to a predetermined amount.

Covalently linked mercaptoacetic acid on ZrO2 coupled cellulose nanofibers for solid phase extraction of Hg(ii): experimental and DFT studies

Zirconium oxide (ZrO₂) nanoparticles were introduced onto cellulose nanofibers after being covalently functionalized with mercaptoacetic acid. We experimentally demonstrate that the nanocomposite is capable of selectively capturing Hg(ii) from aqueous samples down to trace level concentrations. Density functional theory (DFT) calculations indicate that energetically favorable R-S → Hg ← O-R bidentate complex formation enhances the rapid adsorption, leading to selective extraction of Hg(ii). Furthermore, the loss of ZrO₂ particles during flow-through studies is controlled and restricted after binding to CNF rather than being used directly in the column. The Hg(ii) selectivity is primarily due to the Lewis soft-soft acid-base chelation of Hg(ii) with the mercapto functionalities of the adsorbent. The experimental observations depict a high sorption capacity of 280.5 mg g^-1 for Hg(ii). The limit of detection and quantification of the proposed approach were found to be 0.04 μg L^-1 and 0.15 μg L^-1, respectively. Analytical method accuracy and validity were determined by analyzing Standard Reference Materials and by the standard addition method (recovery > 95% with a 5% RSD). The findings of a Student's t-test were found to be lower than the critical Student's t value. Real water samples were successfully analyzed using the developed procedure.

Extraction Systems and Analytical Techniques for Food Phenolic Compounds: A Review

Phenolic compounds are highly valuable food components due to their potential utilisation as natural bioactive and antioxidant molecules for the food, cosmetic, chemical, and pharmaceutical industries. For this purpose, the development and optimisation of efficient extraction methods is crucial to obtain phenolic-rich extracts and, for some applications, free of interfering compounds. It should be accompanied with robust analytical tools that enable the standardisation of phenolic-rich extracts for industrial applications. New methodologies based on both novel extraction and/or analysis are also implemented to characterise and elucidate novel chemical structures and to face safety, pharmacology, and toxicity issues related to phenolic compounds at the molecular level. Moreover, in combination with multivariate analysis, the extraction and analysis of phenolic compounds offer tools for plant chemotyping, food traceability and marker selection in omics studies. Therefore, this study reviews extraction techniques applied to recover phenolic compounds from foods and agri-food by-products, including liquid-liquid extraction, solid-liquid extraction assisted by intensification technologies, solid-phase extraction, and combined methods. It also provides an overview of the characterisation techniques, including UV-Vis, infra-red, nuclear magnetic resonance, mass spectrometry and others used in minor applications such as Raman spectroscopy and ion mobility spectrometry, coupled or not to chromatography. Overall, a wide range of methodologies are now available, which can be applied individually and combined to provide complementary results in the roadmap around the study of phenolic compounds.

Analytical perspective and environmental remediation potentials of magnetic composite nanosorbents

The synthesis and application of magnetic nanosorbents to remove emerging pollutants have been considered the best environmental remediation and sustainability option. Incorporating magnetism shortens the treatment time and allows the sorbent to be recovered quickly using external magnetic with many cycles. The implementation of magnetic solid-phase extraction (MSPE) using magnetic materials of different shapes, sizes, and surface morphology can be a valuable tool in applying materials to prepare analytical samples. In MSPE applications, materials with strong magnetic domain can be used as precursors for constructing magnetic composite as a promising sorbent. This article focuses on the most recent and exceptional applications of magnetic adsorbents for preconcentration and removal purposes. Magnetic adsorbents, such as nanoparticles (NPs), foam, sponges, nanocomposites, hydrogels, and beads with multifunctional attributes have been comprehensively studied in terms of preparation procedures, limitations, advantages, and interactions between pollutants and magnetic composites. The role of magnetic sorbents in sample preparation methods, such as simple solid-phase extraction and microextraction, as well as sorptive extraction using a stir bar, was also examined. The use of magnetic adsorbents with analytical techniques, such as solid-phase extraction and solid-phase microextraction improves the method for preparing samples concerning the influential role of magnetic adsorbents. Towards the end, promising features and future outlook are also directed.

Preconcentration and Separation of Gold Nanoparticles from Environmental Waters Using Extraction Techniques Followed by Spectrometric Quantification

The quantification of gold nanoparticles (AuNP) in environmental samples at ultratrace concentrations can be accurately performed by sophisticated and pricey analytical methods. This paper aims to challenge the analytical potential and advantages of cheaper and equally reliable alternatives that couple the well-established extraction procedures with common spectrometric methods. We discuss several combinations of techniques that are suitable for separation/preconcentration and quantification of AuNP in complex and challenging aqueous matrices, such as tap, river, lake, brook, mineral, and sea waters, as well as wastewaters. Cloud point extraction (CPE) has been successfully combined with electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma mass spectrometry (ICP-MS), chemiluminescence (CL), and total reflection X-ray fluorescence spectrometry (TXRF). The major advantage of this approach is the ability to quantify AuNP of different sizes and coatings in a sample with a volume in the order of milliliters. Small volumes of sample (5 mL), dispersive solvent (50 µL), and extraction agent (70 µL) were reported also for surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) coupled with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS). The limits of detection (LOD) achieved using different combinations of methods as well as enrichment factors (EF) varied greatly, being 0.004–200 ng L−1 and 8–250, respectively.

A simple method for simultaneous determination of organophosphate esters and their diester metabolites in dairy products and human milk by using solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry

Organophosphate esters (OPEs) and their diester metabolites have been frequently found in various environmental matrices and regarded as emerging environmental pollutants, whereas data on their occurrence in foods and human matrices are still limited. In this study, a novel and simple procedure was developed to simultaneously determine 14 OPEs and 6 diester metabolites in dairy products and human milk. After enzymatic hydrolysis by β-glucuronidase/arylsulfatase, a freeze-dried milk sample was extracted with acetonitrile and purified by solid-phase extraction. Subsequently, all target compounds were determined by HPLC-ESI-MS/MS. Linearity, limits of detection (LODs), recovery, precision, and matrix effects of the proposed methodology were validated, and the parameters of HPLC-ESI-MS/MS were optimized. LODs for OPEs and their diester metabolites were from 0.001 to 0.02 ng/mL, and limits of quantification (LOQs) were 0.01-0.3 ng/mL. Average recoveries at two spiked levels ranged between 67.3 and 121%, with relative standard deviation lower than 20.7%. A test for matrix effects showed that most analytes presented signal suppression, and isotopically labeled ISs were essential for compensating for the matrix effects. Finally, OPEs and their metabolites both showed high detecting frequencies in real samples, which indicated that these emerging pollutants were ubiquitous in foods and the human body, and the impact of the diester metabolites on population exposure must be included in exposure assessment.

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of SPE techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects. This article is protected by copyright. All rights reserved.

Selective Extraction of Trace Arsenite Ions Using a Highly Porous Aluminum Oxide Membrane with Ordered Nanopores

Metal ion extraction and determination at trace level concentration are challenging due to sample complexity or spectral interferences. Herein, we prepared a through-hole aluminum oxide membrane (AOM) by electrochemical anodization of aluminum substrates. The prepared AOM was characterized by scanning electron microscopy, surface area analysis, porosity measurements, and X-ray photoelectron spectroscopy. The AOM with ordered nanopores was highly porous and possess inherent binding sites for selective arsenite sorption. The AOM was used as a novel sorbent for solid-phase microextraction and preconcentration of arsenite ions in water samples. The AOM's sub-micrometer thickness allows water molecules to flow freely across the pores. Before instrumental determination, the suggested microextraction approach removes spectral interferents and improves the analyte ion concentration, with a detection limit of 0.02 μg L^-1. Analyzing a standard reference material was used to validate the procedure. Student's t-test value was less than critical Student's t-value of 4.303 at a 95% confidence level. With coefficients of variation of 3.25%, good precision was achieved.