A flexible analytic wavelet transform based approach for motor-imagery tasks classification in BCI applications

EEG channel and feature investigation in binary and multiple motor imagery task predictions

Introduction

Motor Imagery (MI) Electroencephalography (EEG) signals are non-stationary and dynamic physiological signals which have low signal-to-noise ratio. Hence, it is difficult to achieve high classification accuracy. Although various machine learning methods have already proven useful to that effect, the use of many features and ineffective EEG channels often leads to a complex structure of classifier algorithms. State-of-the-art studies were interested in improving classification performance with complex feature extraction and classification methods by neglecting detailed EEG channel and feature investigation in predicting MI tasks from EEGs. Here, we investigate the effects of the statistically significant feature selection method on four different feature domains (time-domain, frequency-domain, time-frequency domain, and non-linear domain) and their two different combinations to reduce the number of features and classify MI-EEG features by comparing low-dimensional matrices with well-known machine learning algorithms.

Methods

Our main goal is not to find the best classifier performance but to perform feature and channel investigation in MI task classification. Therefore, the detailed investigation of the effect of EEG channels and features is implemented using a statistically significant feature distribution on 22 EEG channels for each feature set separately. We used the BCI Competition IV Dataset IIa and 288 samples per person. A total of 1,364 MI-EEG features were analyzed in this study. We tested nine distinct classifiers: Decision tree, Discriminant analysis, Logistic regression, Naive Bayes, Support vector machine, k-Nearest neighbor, Ensemble learning, Neural networks, and Kernel approximation.

Results

Among all feature sets considered, classifications performed with non-linear and combined feature sets resulted in a maximum accuracy of 63.04% and 47.36% for binary and multiple MI task predictions, respectively. The ensemble learning classifier achieved the maximum accuracy in almost all feature sets for binary and multiple MI task classifications.

Discussion

Our research thus shows that the statistically significant feature-based feature selection method significantly improves the classification performance with fewer features in almost all feature sets, enabling detailed and effective EEG channel and feature investigation.

Exploring Feature Selection and Classification Techniques to Improve the Performance of an Electroencephalography-Based Motor Imagery Brain-Computer Interface System

The accuracy of classifying motor imagery (MI) activities is a significant challenge when using brain-computer interfaces (BCIs). BCIs allow people with motor impairments to control external devices directly with their brains using electroencephalogram (EEG) patterns that translate brain activity into control signals. Many researchers have been working to develop MI-based BCI recognition systems using various time-frequency feature extraction and classification approaches. However, the existing systems still face challenges in achieving satisfactory performance due to large amount of non-discriminative and ineffective features. To get around these problems, we suggested a multiband decomposition-based feature extraction and classification method that works well, along with a strong feature selection method for MI tasks. Our method starts by splitting the preprocessed EEG signal into four sub-bands. In each sub-band, we then used a common spatial pattern (CSP) technique to pull out narrowband-oriented useful features, which gives us a high-dimensional feature vector. Subsequently, we utilized an effective feature selection method, Relief-F, which reduces the dimensionality of the final features. Finally, incorporating advanced classification techniques, we classified the final reduced feature vector. To evaluate the proposed model, we used the three different EEG-based MI benchmark datasets, and our proposed model achieved better performance accuracy than existing systems. Our model's strong points include its ability to effectively reduce feature dimensionality and improve classification accuracy through advanced feature extraction and selection methods.

Motor Imagery EEG Signal Classification Using Distinctive Feature Fusion with Adaptive Structural LASSO

A motor imagery brain-computer interface connects the human brain and computers via electroencephalography (EEG). However, individual differences in the frequency ranges of brain activity during motor imagery tasks pose a challenge, limiting the manual feature extraction for motor imagery classification. To extract features that match specific subjects, we proposed a novel motor imagery classification model using distinctive feature fusion with adaptive structural LASSO. Specifically, we extracted spatial domain features from overlapping and multi-scale sub-bands of EEG signals and mined discriminative features by fusing the task relevance of features with spatial information into the adaptive LASSO-based feature selection. We evaluated the proposed model on public motor imagery EEG datasets, demonstrating that the model has excellent performance. Meanwhile, ablation studies and feature selection visualization of the proposed model further verified the great potential of EEG analysis.

Variance characteristic preserving common spatial pattern for motor imagery BCI

Introduction

The common spatial patterns (CSP) algorithm is the most popular technique for extracting electroencephalogram (EEG) features in motor imagery based brain-computer interface (BCI) systems. CSP algorithm embeds the dimensionality of multichannel EEG data to extract features of motor imagery tasks. Most previous studies focused on the optimization of the time domain and the spectrum domain of EEG signal to improve the effectiveness of CSP, whereas ignoring the constraint on the projected feature space.

Methods

This study proposed a variance characteristic preserving CSP (VPCSP) that is modified by a regularization item based on graph theory. Specifically, we calculated the loss of abnormalities of the projected data while preserving the variance characteristic locally. Then the loss could be rewritten as a matrix with the introduction of the Laplace matrix, which turned it into a generalized eigenvalue problem equivalent to CSP. This study evaluated the proposed method on two public EEG datasets from the BCI competition. The modified method could extract robust and distinguishable features that provided higher classification performance. Experimental results showed that the proposed regularization improved the effectiveness of CSP significantly and achieved superior performance compared with reported modified CSP algorithms significantly.

Results

The classification accuracy of the proposed method achieved 87.88 %, 90.07 %, and 76.06 % on public dataset IV part I, III part IVa and the self-collected dataset, respectively. Comparative experiments are conducted on two public datasets and one self-collected dataset. Results showed that the proposed method outperformed the reported algorithm.

Discussion

The proposed method can extract robust features to increase the performance of BCI systems. And the proposal still has expandability. These results show that our proposal is a promising candidate for the performance improvement of MI-BCI.

Implementation of artificial intelligence and machine learning-based methods in brain-computer interaction

Brain-computer interfaces are used for direct two-way communication between the human brain and the computer. Brain signals contain valuable information about the mental state and brain activity of the examined subject. However, due to their non-stationarity and susceptibility to various types of interference, their processing, analysis and interpretation are challenging. For these reasons, the research in the field of brain-computer interfaces is focused on the implementation of artificial intelligence, especially in five main areas: calibration, noise suppression, communication, mental condition estimation, and motor imagery. The use of algorithms based on artificial intelligence and machine learning has proven to be very promising in these application domains, especially due to their ability to predict and learn from previous experience. Therefore, their implementation within medical technologies can contribute to more accurate information about the mental state of subjects, alleviate the consequences of serious diseases or improve the quality of life of disabled patients.

EEG-CDILNet: a lightweight and accurate CNN network using circular dilated convolution for motor imagery classification

Objective.The combination of the motor imagery (MI) electroencephalography (EEG) signals and deep learning-based methods is an effective way to improve MI classification accuracy. However, deep learning-based methods often need too many trainable parameters. As a result, the trade-off between the network decoding performance and computational cost has always been an important challenge in the MI classification research.Approach.In the present study, we proposed a new end-to-end convolutional neural network (CNN) model called the EEG-circular dilated convolution (CDIL) network, which takes into account both the lightweight model and the classification accuracy. Specifically, the depth-separable convolution was used to reduce the number of network parameters and extract the temporal and spatial features from the EEG signals. CDIL was used to extract the time-varying deep features that were generated in the previous stage. Finally, we combined the features extracted from the two stages and used the global average pooling to further reduce the number of parameters, in order to achieve an accurate MI classification. The performance of the proposed model was verified using three publicly available datasets.Main results.The proposed model achieved an average classification accuracy of 79.63% and 94.53% for the BCIIV2a and HGD four-classification task, respectively, and 87.82% for the BCIIV2b two-classification task. In particular, by comparing the number of parameters, computation and classification accuracy with other lightweight models, it was confirmed that the proposed model achieved a better balance between the decoding performance and computational cost. Furthermore, the structural feasibility of the proposed model was confirmed by ablation experiments and feature visualization.Significance.The results indicated that the proposed CNN model presented high classification accuracy with less computing resources, and can be applied in the MI classification research.

Statistically significant features improve binary and multiple Motor Imagery task predictions from EEGs

In recent studies, in the field of Brain-Computer Interface (BCI), researchers have focused on Motor Imagery tasks. Motor Imagery-based electroencephalogram (EEG) signals provide the interaction and communication between the paralyzed patients and the outside world for moving and controlling external devices such as wheelchair and moving cursors. However, current approaches in the Motor Imagery-BCI system design require effective feature extraction methods and classification algorithms to acquire discriminative features from EEG signals due to the non-linear and non-stationary structure of EEG signals. This study investigates the effect of statistical significance-based feature selection on binary and multi-class Motor Imagery EEG signal classifications. In the feature extraction process performed 24 different time-domain features, 15 different frequency-domain features which are energy, variance, and entropy of Fourier transform within five EEG frequency subbands, 15 different time-frequency domain features which are energy, variance, and entropy of Wavelet transform based on five EEG frequency subbands, and 4 different Poincare plot-based non-linear parameters are extracted from each EEG channel. A total of 1,364 Motor Imagery EEG features are supplied from 22 channel EEG signals for each input EEG data. In the statistical significance-based feature selection process, the best one among all possible combinations of these features is tried to be determined using the independent t-test and one-way analysis of variance (ANOVA) test on binary and multi-class Motor Imagery EEG signal classifications, respectively. The whole extracted feature set and the feature set that contain statistically significant features only are classified in this study. We implemented 6 and 7 different classifiers in multi-class and binary (two-class) classification tasks, respectively. The classification process is evaluated using the five-fold cross-validation method, and each classification algorithm is tested 10 times. These repeated tests provide to check the repeatability of the results. The maximum of 61.86 and 47.36% for the two-class and four-class scenarios, respectively, are obtained with Ensemble Subspace Discriminant among all these classifiers using selected features including only statistically significant features. The results reveal that the introduced statistical significance-based feature selection approach improves the classifier performances by achieving higher classifier performances with fewer relevant components in Motor Imagery task classification. In conclusion, the main contribution of the presented study is two-fold evaluation of non-linear parameters as an alternative to the commonly used features and the prediction of multiple Motor Imagery tasks using statistically significant features.

A novel online BCI system using speech imagery and ear-EEG for home appliances control

BACKGROUND AND OBJECTIVE

This paper investigates a novel way to interact with home appliances via a brain-computer interface (BCI), using electroencephalograph (EEG) signals acquired from around the user's ears with a custom-made wearable BCI headphone.

METHODS

The users engage in speech imagery (SI), a type of mental task where they imagine speaking out a specific word without producing any sound, to control an interactive simulated home appliance. In this work, multiple models are employed to improve the performance of the system. Temporally-stacked multi-band covariance matrix (TSMBC) method is used to represent the neural activities during SI tasks with spatial, temporal, and spectral information included. To further increase the usability of our proposed system in daily life, a calibration session, where the pre-trained models are fine-tuned, is added to maintain performance over time with minimal training. Eleven participants were recruited to evaluate our method over three different sessions: a training session, a calibration session, and an online session where users were given the freedom to achieve a given goal on their own.

RESULTS

In the offline experiment, all participants were able to achieve a classification accuracy significantly higher than the chance level. In the online experiments, a few participants were able to use the proposed system to freely control the home appliance with high accuracy and relatively fast command delivery speed. The best participant achieved an average true positive rate and command delivery time of 0.85 and 3.79 s/command, respectively.

CONCLUSION

Based on the positive experimental results and user surveys, the novel ear-EEG-SI-based BCI paradigm is a promising approach for the wearable BCI system for daily life.

Robustly Effective Approaches on Motor Imagery-Based Brain Computer Interfaces

Motor Imagery Brain Computer Interfaces (MI-BCIs) are systems that receive the users’ brain activity as an input signal in order to communicate between the brain and the interface or an action to be performed through the detection of the imagination of a movement. Brainwaves’ features are crucial for the performance of the interface to be increased. The robustness of these features must be ensured in order for the effectiveness to remain high in various subjects. The present work consists of a review, which includes scientific publications related to the use of robust feature extraction methods in Motor Imagery from 2017 until today. The research showed that the majority of the works focus on spatial features through Common Spatial Patterns (CSP) methods (44.26%). Based on the combination of accuracy percentages and K-values, which show the effectiveness of each approach, Wavelet Transform (WT) has shown higher robustness than CSP and PSD methods in the majority of the datasets used for comparison and also in the majority of the works included in the present review, although they had a lower usage percentage in the literature (16.65%). The research showed that there was an increase in 2019 of the detection of spatial features to increase the robustness of an approach, but the time-frequency features, or a combination of those, achieve better results with their increase starting from 2019 onwards. Additionally, Wavelet Transforms and their variants, in combination with deep learning, manage to achieve high percentages thus making a method robustly accurate.

Feature Selection Using Extreme Gradient Boosting Bayesian Optimization to upgrade the Classification Performance of Motor Imagery signals for BCI

BACKGROUND

A motor imagery (MI) based brain computer interface (BCI) is a challenging nonmuscular connection system used to independently perform movement-related tasks. It is gaining increasing prominence in helping paralyzed individuals communicate with the real world. Achieving better classification accuracy is the major concern in the field of motor imagery-based BCI. To upgrade the classification performance, relevant features play a vital role. The relevant features can be selected by the extreme gradient Bayesian optimization (XGBO) method.

METHODS

In this paper, a combination of time-, frequency-, and spatial-related MI features are extracted to design a reliable MI-BCI system. The proposed method incorporates the XGBO algorithm for feature selection and the random forest for the classification of EEG signals. The potency of the proposed system was investigated using two public EEG datasets (BCI Competition III dataset IIIa and dataset IVa). A novel XGBO algorithm increases the accuracy and reduces the time consumption by reducing the dimensionality of features. The proposed algorithm selects the minimum number of features that increase the computational efficacy for MI-based BCI systems.

COMPARISON WITH EXISTING METHODS

The proposed method is compared with ANOVA, sequential forward selection, recursive feature elimination, and LASSO methods and the accuracy rate is increased with the lowest computation time.

RESULTS

The proposed method achieves mean accuracies of 94.44% and 88.72% and classification errors of 5.56% and 11.28% for Datasets IIIa and IVa, respectively. It outperforms four state-of-art methods with 0.87% and 0.59% increases in the accuracy for Datasets IIIa and IVa, respectively.

Motor Imagination of Lower Limb Movements at Different Frequencies

Motor imagination (MI) is the mental process of only imagining an action without an actual movement. Research on MI has made significant progress in feature information detection and machine learning decoding algorithms, but there are still problems, such as a low overall recognition rate and large differences in individual execution effects, which make the development of MI run into a bottleneck. Aiming at solving this bottleneck problem, the current study optimized the quality of the MI original signal by “enhancing the difficulty of imagination tasks,” conducted the qualitative and quantitative analyses of EEG rhythm characteristics, and used quantitative indicators, such as ERD mean value and recognition rate. Research on the comparative analysis of the lower limb MI of different tasks, namely, high-frequency motor imagination (HFMI) and low-frequency motor imagination (LFMI), was conducted. The results validate the following: the average ERD of HFMI (−1.827) is less than that of LFMI (−1.3487) in the alpha band, so did (−3.4756 < −2.2891) in the beta band. In the alpha and beta characteristic frequency bands, the average ERD of HFMI is smaller than that of LFMI, and the ERD values of the two are significantly different (p=0.0074 < 0.01; r = 0.945). The ERD intensity STD values of HFMI are less than those of LFMI. which suggests that the ERD intensity individual difference among the subjects is smaller in the HFMI mode than in the LFMI mode. The average recognition rate of HFMI is higher than that of LFMI (87.84% > 76.46%), and the recognition rate of the two modes is significantly different (p=0.0034 < 0.01; r = 0.429). In summary, this research optimizes the quality of MI brain signal sources by enhancing the difficulty of imagination tasks, achieving the purpose of improving the overall recognition rate of the lower limb MI of the participants and reducing the differences of individual execution effects and signal quality among the subjects.

Imaginary Finger Movements Decoding Using Empirical Mode Decomposition and a Stacked BiLSTM Architecture

Motor Imagery Electroencephalogram (MI-EEG) signals are widely used in Brain-Computer Interfaces (BCI). MI-EEG signals of large limbs movements have been explored in recent researches because they deliver relevant classification rates for BCI systems. However, smaller and noisy signals corresponding to hand-finger imagined movements are less frequently used because they are difficult to classify. This study proposes a method for decoding finger imagined movements of the right hand. For this purpose, MI-EEG signals from C3, Cz, P3, and Pz sensors were carefully selected to be processed in the proposed framework. Therefore, a method based on Empirical Mode Decomposition (EMD) is used to tackle the problem of noisy signals. At the same time, the sequence classification is performed by a stacked Bidirectional Long Short-Term Memory (BiLSTM) network. The proposed method was evaluated using k-fold cross-validation on a public dataset, obtaining an accuracy of 82.26%.

The Ensemble Machine Learning-Based Classification of Motor Imagery Tasks in Brain-Computer Interface

The Brain-Computer Interface (BCI) permits persons with impairments to interact with the real world without using the neuromuscular pathways. BCIs are based on artificial intelligence piloted systems. They collect brain activity patterns linked to the mental process and transform them into commands for actuators. The potential application of BCI systems is in the rehabilitation centres. In this context, a novel method is devised for automated identification of the Motor Imagery (MI) tasks. The contribution is an effective hybridization of the Multiscale Principal Component Analysis (MSPCA), Wavelet Packet Decomposition (WPD), statistical features extraction from subbands, and ensemble learning-based classifiers for categorization of the MI tasks. The intended electroencephalogram (EEG) signals are segmented and denoised. The denoising is achieved with a Daubechies algorithm-based wavelet transform (WT) incorporated in the MSPCA. The WT with the 5th level of decomposition is used. Onward, the Wavelet Packet Decomposition (WPD), with the 4th level of decomposition, is used for subbands formation. The statistical features are selected from each subband, namely, mean absolute value, average power, standard deviation, skewness, and kurtosis. Also, ratios of absolute mean values of adjacent subbands are computed and concatenated with other extracted features. Finally, the ensemble machine learning approach is used for the classification of MI tasks. The usefulness is evaluated by using the BCI competition III, MI dataset IVa. Results revealed that the suggested ensemble learning approach yields the highest classification accuracies of 98.69% and 94.83%, respectively, for the cases of subject-dependent and subject-independent problems.

A self-learned decomposition and classification model for schizophrenia diagnosis

BACKGROUND

Schizophrenia (SZ) is a type of neurological disorder that is diagnosed by professional psychiatrists based on interviews and manual screening of patients. The procedures are time-consuming, burdensome, and prone to human error. This urgently necessitates the development of an effective and precise computer-aided design for the detection of SZ. One such efficient source for SZ detection is the electroencephalogram (EEG) signals. Because EEG signals are non-stationary, it is challenging to find representative information in its raw form. Decomposing the signals into multi-modes can provide detailed insight information from it. But the choice of uniform decomposition and hyper-parameters leads to information loss affecting system performance drastically.

METHOD

In this paper, automatic signal decomposition and classification methods are proposed for the detection of SZ and healthy control EEG signals. The Fisher score method is used for the selection of the most discriminant channel. Flexible tunable Q wavelet transform (F-TQWT) is developed for efficient decomposition of EEG signals by reducing root mean square error with grey wolf optimization (GWO) algorithm. Five features are extracted from the adaptively generated subbands and selected by the Kruskal Wallis test. The feature matrix is given as an input to the flexible least square support vector machine (F-LSSVM) classifier. The hyper-parameters and kernel of classifier are selected such that the accuracy of each subband is maximized using GWO algorithm.

RESULTS

The effectiveness and superiority of the proposed method is tested by evaluating seven performance parameters. An accuracy of 91.39%, sensitivity, specificity, precision, F-1 measure, false positive rate and error of 92.65%, 93.22%, 95.57%, 0.9306, 6.78% and 8.61% is achieved. The results prove superiority of the developed F-TQWT decomposition and F-LSSVM classifier over existing methodologies.

CONCLUSION

The EEG signals of healthy control and SZ subjects performing motor and auditory tasks simultaneously provide higher discrimination ability over the subjects performing auditory and motory tasks separately. The developed model is accurate, robust, and effective as it is developed on a relatively larger data-set, obtained maximum performance, and tested using ten-fold cross-validation technique. This proposed model is ready to be put to test for real-time SZ detection.

A Review of the Role of Machine Learning Techniques towards Brain–Computer Interface Applications

This review article provides a deep insight into the Brain–Computer Interface (BCI) and the application of Machine Learning (ML) technology in BCIs. It investigates the various types of research undertaken in this realm and discusses the role played by ML in performing different BCI tasks. It also reviews the ML methods used for mental state detection, mental task categorization, emotion classification, electroencephalogram (EEG) signal classification, event-related potential (ERP) signal classification, motor imagery categorization, and limb movement classification. This work explores the various methods employed in BCI mechanisms for feature extraction, selection, and classification and provides a comparative study of reviewed methods. This paper assists the readers to gain information regarding the developments made in BCI and ML domains and future improvements needed for improving and designing better BCI applications.

A novel method for classification of multi-class motor imagery tasks based on feature fusion

Motor imagery based brain computer interface (MI-BCI) has the advantage of strong independence that can rely on the spontaneous brain activity of the user to operate external devices. However, MI-BCI still has the problem of poor control effect, which requires more effective feature extraction algorithms and classification methods to extract distinctly separable features from electroencephalogram (EEG) signals. This paper proposes a novel framework based on Bispectrum, Entropy and common spatial pattern (BECSP). Here we use three methods of bispectrum in higher order spectra, entropy and CSP to extract MI-EEG signal features, and then select the most contributing features through tree-based feature selection algorithm. By comparing the classification results of SVM, Random Forest, Naive Bayes, LDA, KNN, Xgboost and Adaboost, we finally decide to use the SVM algorithm based on RBF kernel function which obtained the best result among them for classification. The proposed method is applied to the BCI competition IV data set 2a and BCI competition III data set IVa. On data set 2a, the highest accuracy on the evaluation data set reaches 85%. The experiment on data set IVa can also achieve good results. Compared with other algorithms that use the same data set, the performance of our algorithm has also been improved.

Abdul Majeed A. The classification of motor imagery response: an accuracy enhancement through the ensemble of random subspace k-NN

Brain-computer interface (BCI) is a viable alternative communication strategy for patients of neurological disorders as it facilitates the translation of human intent into device commands. The performance of BCIs primarily depends on the efficacy of the feature extraction and feature selection techniques, as well as the classification algorithms employed. More often than not, high dimensional feature set contains redundant features that may degrade a given classifier's performance. In the present investigation, an ensemble learning-based classification algorithm, namely random subspace k-nearest neighbour (k-NN) has been proposed to classify the motor imagery (MI) data. The common spatial pattern (CSP) has been applied to extract the features from the MI response, and the effectiveness of random forest (RF)-based feature selection algorithm has also been investigated. In order to evaluate the efficacy of the proposed method, an experimental study has been implemented using four publicly available MI dataset (BCI Competition III dataset 1 (data-1), dataset IIIA (data-2), dataset IVA (data-3) and BCI Competition IV dataset II (data-4)). It was shown that the ensemble-based random subspace k-NN approach achieved the superior classification accuracy (CA) of 99.21%, 93.19%, 93.57% and 90.32% for data-1, data-2, data-3 and data-4, respectively against other models evaluated, namely linear discriminant analysis, support vector machine, random forest, Naïve Bayes and the conventional k-NN. In comparison with other classification approaches reported in the recent studies, the proposed method enhanced the accuracy by 2.09% for data-1, 1.29% for data-2, 4.95% for data-3 and 5.71% for data-4, respectively. Moreover, it is worth highlighting that the RF feature selection technique employed in the present study was able to significantly reduce the feature dimension without compromising the overall CA. The outcome from the present study implies that the proposed method may significantly enhance the accuracy of MI data classification.

A facile and flexible motor imagery classification using electroencephalogram signals

BACKGROUND

Mind machine interface (MMI) enables communication with milieu by measuring brain activities. The reliability of MMI systems is highly dependent on the identification of various motor imagery (MI) tasks. Perfect discrimination of brain activities is required to avoid miscommunication. Electroencephalogram (EEG) signals provide a scrupulous solution for the development of MMI. Analysis of multi-channel EEG signals increases the burden of computation drastically. The extraction of hidden information from raw EEG signals is difficult due to its complex nature. A signal is needed to be decomposed and classified for the extraction of hidden information from it. But selecting the uniform decomposition and hyperparameters for decomposition and classification of the signal can lead to information loss and misclassification.

METHOD

This paper presents a novel method for identifying right-hand and right-foot MI tasks. The method employs a single-channel adaptive decomposition and EEG signal classification. The multi-cluster unsupervised learning method is employed for the selection of significant channel. Further, flexible variational mode decomposition (F-VMD) is used for the adaptive decomposition of signals. The values of decomposition parameters are selected adaptively following the nature of EEG signals. The value of decomposition parameters is used to decompose the signals into narrow-band modes. Hjorth, entropy and quartile based features are elicited from the modes of F-VMD. These features are classified by using a flexible extreme learning machine (F-ELM). F-ELM selects the hyperparameters and kernel adaptively by reducing the classification error.

RESULTS

The performance of the proposed method is evaluated by measuring five performance parameters namely accuracy (ACC), sensitivity (SEN), specificity (SPE), Mathew's correlation coefficient (MCC), and F-1 score. An ACC, SEN, SPE, MCC and F-1 score is obtained as 100%, 100%, 100%, 100%, and 1. The performance parameters obtained by the proposed method prove the superiority over other methodologies using the same data-set.

CONCLUSION

The proposed method proved to be promising and efficient with a single channel and two features. This framework can be utilized for the development of a real-time mind-machine interface like robotic arm, wheel chairs, etc.

Identification of Motor and Mental Imagery EEG in Two and Multiclass Subject-Dependent Tasks Using Successive Decomposition Index

The development of fast and robust brain-computer interface (BCI) systems requires non-complex and efficient computational tools. The modern procedures adopted for this purpose are complex which limits their use in practical applications. In this study, for the first time, and to the best of our knowledge, a successive decomposition index (SDI)-based feature extraction approach is utilized for the classification of motor and mental imagery electroencephalography (EEG) tasks. First of all, the public datasets IVa, IVb, and V from BCI competition III were denoised using multiscale principal analysis (MSPCA), and then a SDI feature was calculated corresponding to each trial of the data. Finally, six benchmark machine learning and neural network classifiers were used to evaluate the performance of the proposed method. All the experiments were performed for motor and mental imagery datasets in binary and multiclass applications using a 10-fold cross-validation method. Furthermore, computerized automatic detection of motor and mental imagery using SDI (CADMMI-SDI) is developed to describe the proposed approach practically. The experimental results suggest that the highest classification accuracy of 97.46% (Dataset IVa), 99.52% (Dataset IVb), and 99.33% (Dataset V) was obtained using feedforward neural network classifier. Moreover, a series of experiments, namely, statistical analysis, channels variation, classifier parameters variation, processed and unprocessed data, and computational complexity, were performed and it was concluded that SDI is robust for noise, and a non-complex and efficient biomarker for the development of fast and accurate motor and mental imagery BCI systems.

A Simplified CNN Classification Method for MI-EEG via the Electrode Pairs Signals

A brain-computer interface (BCI) based on electroencephalography (EEG) can provide independent information exchange and control channels for the brain and the outside world. However, EEG signals come from multiple electrodes, the data of which can generate multiple features. How to select electrodes and features to improve classification performance has become an urgent problem to be solved. This paper proposes a deep convolutional neural network (CNN) structure with separated temporal and spatial filters, which selects the raw EEG signals of the electrode pairs over the motor cortex region as hybrid samples without any preprocessing or artificial feature extraction operations. In the proposed structure, a 5-layer CNN has been applied to learn EEG features, a 4-layer max pooling has been used to reduce dimensionality, and a fully-connected (FC) layer has been utilized for classification. Dropout and batch normalization are also employed to reduce the risk of overfitting. In the experiment, the 4 s EEG data of 10, 20, 60, and 100 subjects from the Physionet database are used as the data source, and the motor imaginations (MI) tasks are divided into four types: left fist, right fist, both fists, and both feet. The results indicate that the global averaged accuracy on group-level classification can reach 97.28%, the area under the receiver operating characteristic (ROC) curve stands out at 0.997, and the electrode pair with the highest accuracy on 10 subjects dataset is FC3-FC4, with 98.61%. The research results also show that this CNN classification method with minimal (2) electrode can obtain high accuracy, which is an advantage over other methods on the same database. This proposed approach provides a new idea for simplifying the design of BCI systems, and accelerates the process of clinical application.