Stabilization of non-aqueous emulsions by poly(2-vinylpyridine)-b-poly(butadiene) block copolymers

Self-Assembly of Block Copolymers in Thin Films Swollen-Rich in Solvent Vapors

In this study we have employed a polymer processing method based on solvent vapor annealing in order to condense relatively large amounts of solvent vapors onto thin films of block copolymers and thus to promote their self-assembly into ordered nanostructures. As revealed by the atomic force microscopy, a periodic lamellar morphology of poly(2-vinylpyridine)-b-polybutadiene and an ordered morphology comprised of hexagonally-packed structures made of poly(2-vinylpyridine)-b-poly(cyclohexyl methacrylate) were both successfully generated on solid substrates for the first time.

Nonaqueous Emulsion Polycondensation Enabled by a Self-Assembled Cage-like Surfactant

Nonaqueous emulsions are crucial for a range of applications based on water-sensitive systems such as controlled polymerizations requiring anhydrous reaction conditions and the stabilization of readily hydrolyzable reagents or pharmacologically active components. However, defined molecular surfactants to stabilize such nonaqueous emulsions are scarce. We introduce a self-assembled coordination cage, decorated with cholesterol functionalities, to serve as a molecular surfactant for various oil-in-oil emulsions of immiscible organic solvents. While the positively charged cage forms the amphiphile's polar moiety, the non-polar cholesterol appendices can bend in a common direction to stabilize the emulsion. Templated by the droplets, polycondensation reactions were carried out to produce microstructured polyurethane and polyurea materials of different particle sizes and morphologies. Further, the amphiphilic cage can encapsulate a guest molecule and the resulting host-guest assembly was also examined as a surfactant. In addition, the aggregation behavior of the amphiphilic cage in an aqueous medium was examined.

Tailor-made urethane-linked alkyl-celluloses: A Promising Stabilizer for Oil-in-oil Pickering Emulsions

Oil-in-oil emulsions or nonaqueous emulsions are formulated from two immiscible organic solvents, which provide an ideal platform for water-sensitive systems such as readily hydrolyzable reagents and polymerization in anhydrous conditions....

Dynamic Covalent Nanoparticles for Acid-Responsive Nonaqueous Pickering Emulsions

Acid-responsive nonaqueous (glycerol in n-decane) Pickering emulsions were prepared using preferentially oil-wetted dynamic covalent silica (SiO₂-pDB) nanoparticles as the Pickering emulsifiers. The acid-responsive Pickering emulsifier SiO₂-pDB was prepared based on a Schiff base reaction between amino silica (SiO₂-NH₂) and p-decanoxybenzaldehyde (pDBA). The formation of SiO₂-pDB was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. The preferentially oil-wetted character of SiO₂-pDB was indicated by contact angle measurement. Stable nonaqueous Pickering emulsions were prepared using preferentially oil-wetted SiO₂-pDB as the Pickering emulsifier. However, after adjusting the nonaqueous Pickering emulsions to an acidic environment, complete phase separation occurred. In the acidic environment, preferentially oil-wetted SiO₂-pDB decomposed into hydrophilic SiO₂-NH₂ and hydrophobic pDBA due to the decomposition of the dynamic imine bond in the SiO₂-pDB. Then, the hydrophilic SiO₂-NH₂ and hydrophobic pDBA desorbed from the two-phase interface, resulting in complete phase separation of the initially stable nonaqueous Pickering emulsions. The acid-responsive nonaqueous Pickering emulsions show great potential in application in water sensitive systems, such as oil-based drilling fluids.

Encapsulation and Characterization of Nanoemulsions Based on an Anti-oxidative Polymeric Amphiphile for Topical Apigenin Delivery

Apigenin (Apig) is used as a model drug due to its many beneficial bio-activities and therapeutic potentials. Nevertheless, its poor water solubility and low storage stability have limited its application feasibility on the pharmaceutical field. To address this issue, this study developed nanoemulsions (NEs) using an anti-oxidative polymeric amphiphile, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), hydrogenated soy lecithin (HL), black soldier fly larvae (BSFL) oil, and avocado (AV) oil through pre-homogenization and ultrasonication method. Addition of TPGS (weight ratios 100 and 50% as compared to HL) into NEs effectively reduced particle size and phase transition region area of NEs with pure HL. Incorporation of Apig into NEs made particle size increase and provided a disorder effect on intraparticle molecular packing. Nevertheless, the encapsulation efficiency of NEs for Apig approached to about 99%. The chemical stability of Apig was significantly improved and its antioxidant ability was elevated by incorporation with BSFL oil and AV oil NEs, especially for NEs with single TPGS. NEs with single TPGS also exhibited the best Apig skin deposition. For future application of topical Apig delivery, NEs-gel was formed by the addition of hyaluronic acid (HA) into NEs. Their rheological characteristics were dominated by the surfactant ratios of HL to TPGS.

Advances and Opportunities of Oil-in-Oil Emulsions

Emulsions are mixtures of two immiscible liquids in which droplets of one are dispersed in a continuous phase of the other. The most common emulsions are oil-water systems, which have found widespread use across a number of industries, for example, in the cosmetic and food industries, and are also of advanced scientific interest. In addition, the past decade has seen a significant increase in both the design and application of nonaqueous emulsions. This has been primarily driven by developments in understanding the mechanism of effective stabilization of oil-in-oil (o/o) systems, either using block copolymers (BCPs) or solid (Pickering) particles with appropriate surface functionality. These systems, as highlighted in this review, have enabled emergent applications in areas such as pharmaceutical delivery, energy storage, and materials design (e.g., polymerization, monolith, and porous polymer synthesis). These o/o emulsions complement traditional emulsions that utilize an aqueous phase and allow the use of materials incompatible with water. We assess recent advances in the preparation and stabilization of o/o emulsions, focusing on the identity of the stabilizer (BCP or particle), the interplay between stabilizer and oils, and highlighting applications and opportunities associated with o/o emulsions.

Antitumoral Drug-Loaded Biocompatible Polymeric Nanoparticles Obtained by Non-Aqueous Emulsion Polymerization

Non-aqueous dispersions (NAD) with two types of polymeric nanoparticles (NPs), such as hydrophobic poly(ε-caprolactone) (PCL) and hydrophilic cross-linked poly(vinylpyrrolidone) (PNVP), were synthesized in the present study starting from monomer-in-silicone oil (PDMS) polymerizable non-aqueous emulsions stabilized with the same tailor-made PDMS-based block copolymer. These NPs were loaded with CCisplatin, an antitumoral model drug, directly from the emulsion polymerization step, and it was observed that the presence of the drug leads only to a slight increase of the NPs size, from 120 to 150 nm. The drug release kinetics was evaluated at 37 °C in phosphate buffer at pH = 7.4 and it appeared that the drug release rate from the hydrophilic cross-linked PNVP-based NPs is higher than that from the hydrophobic PCL-based NPs. Moreover, haemolysis tests revealed the fact that these two types of NPs have a good compatibility with the blood. Furthermore, for both the free and drug-loaded NPs, the in vitro cytotoxicity and apoptosis was studied on two types of cancer cell lines, such as MCF-7 (breast cancer cell line) and A-375 (skin cancer cell line). Both types of NPs had no cytotoxic effect but, at a concentration of 500 μg/mL, presented an apoptotic effect similar to that of the free drug.

Micellization of poly(2-vinylpyrridine)-b-poly(cyclohexyl methacrylate) (P2VP-b-PCHMA) block copolymers and their interpolymer complex formation in non-aqueous medium

HYPOTHESIS

The interpolymer complex formation between poly(vinylpyridine)-based polymers with poly(acrylic acid) (PAA), in aqueous or organic medium, is driven by the hydrogen-bonding complexation. Well-defined nanostructures, with specific practical applications, may be obtained by taking advantage of such non-covalent interactions.

EXPERIMENTS

Poly(2-vinylpyridine)-b-poly(cyclohexyl methacrylate) (P2VP-b-PCHMA) and poly(2-vinylpyridine)-b-poly(t-butyl methacrylate)-b-poly(cyclohexyl methacrylate) (P2VP-b-PtBuMA-b-PCHMA) copolymers were synthesized by sequential anionic polymerization. Their micellar characteristics were examined as a function of their molecular characteristics in methylcyclohexane and toluene respectively, as cycloaliphatic and aromatic solvents for the selective solubilization of the PCHMA sequence. The size of interpolymer complexes was determined by DLS, in 1,4 dioxane, and their structural composition was characterized by ¹H NMR.

FINDINGS

The scaling relationship between the molecular composition and the micellar characteristics, such as particle size and aggregation number, could be established for the PCHMA-based copolymers in methylcyclohexane. It was further demonstrated that controlled micellization in 1,4 dioxane, as a non-selective organic solvent, could be achieved by hydrogen bond type interpolymer complex formation between P2VP-b-PCHMA and PAA-b-PCHMA under stoichiometric P2VP/PAA conditions. Finally, the size of the PCHMA-b-PAA/P2VP block copolymer/homopolymer complexes as well as of the PCHMA-b-PAA/PCHMA-b-P2VP block copolymer/block copolymer complexes was correlated with the molecular characteristics of the copolymers.

Self-Assembly of Block and Graft Copolymers in Organic Solvents: An Overview of Recent Advances

This review is an attempt to update the recent advances in the self-assembly of amphiphilic block and graft copolymers. Their micellization behavior is highlighted for linear AB, ABC triblock terpolymers, and graft structures in non-aqueous selective polar and non-polar solvents, including solvent mixtures and ionic liquids. The micellar characteristics, such as particle size, aggregation number, and morphology, are examined as a function of the copolymers' architecture and molecular characteristics.

Particles adsorbed at various non-aqueous liquid-liquid interfaces

Particles adsorbed at liquid interfaces are commonly used to stabilise water-oil Pickering emulsions and water-air foams. The fundamental understanding of the physics of particles adsorbed at water-air and water-oil interfaces is improving significantly due to novel techniques that enable the measurement of the contact angle of individual particles at a given interface. The case of non-aqueous interfaces and emulsions is less studied in the literature. Non-aqueous liquid-liquid interfaces in which water is replaced by other polar solvents have properties similar to those of water-oil interfaces. Nanocomposites of non-aqueous immiscible polymer blends containing inorganic particles at the interface are of great interest industrially and consequently more work has been devoted to them. By contrast, the behaviour of particles adsorbed at oil-oil interfaces in which both oils are immiscible and of low dielectric constant (ε<3) is scarcely studied. Hydrophobic particles are required to stabilise these oil-oil emulsions due to their irreversible adsorption, high interfacial activity and elastic shell behaviour.

Nonaqueous Dispersion Formed by an Emulsion Solvent Evaporation Method Using Block-Random Copolymer Surfactant Synthesized by RAFT Polymerization

As surfactants for preparation of nonaqueous microcapsule dispersions by the emulsion solvent evaporation method, three copolymers composed of stearyl methacrylate (SMA) and glycidyl methacrylate (GMA) with different monomer sequences (i.e., random, block, and block-random) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Despite having the same comonomer composition, the copolymers exhibited different functionality as surfactants for creating emulsions with respective dispersed and continuous phases consisting of methanol and isoparaffin solvent. The optimal monomer sequence for the surfactant was determined based on the droplet sizes and the stabilities of the emulsions created using these copolymers. The block-random copolymer led to an emulsion with better stability than obtained using the random copolymer and a smaller droplet size than achieved with the block copolymer. Modification of the epoxy group of the GMA unit by diethanolamine (DEA) further decreased the droplet size, leading to higher stability of the emulsion. The DEA-modified block-random copolymer gave rise to nonaqueous microcapsule dispersions after evaporation of methanol from the emulsions containing colored dyes in their dispersed phases. These dispersions exhibited high stability, and the particle sizes were small enough for application to the inkjet printing process.