Smart water channelling through dual wettability by leaves of the bamboo Phyllostachys aurea

Leaf wettability and leaf angle affect air-moisture deposition in wheat for self-irrigation

BACKGROUND

Climate change and depleting water sources demand scarce natural water supplies like air moisture to be used as an irrigation water source. Wheat production is threatened by the climate variability and extremes climate events especially heat waves and drought. The present study focused to develop the wheat plant for self-irrigation through optimizing leaf architecture and surface properties for precise irrigation.

METHODS

Thirty-four genotypes were selected from 1796 genotypes with all combinations of leaf angle and leaf rolling. These genotypes were characterized for morpho-physiological traits and soil moisture content at stem-elongation and booting stages. Further, a core set of ten genotypes was evaluated for stem flow efficiency and leaf wettability.

RESULTS

Biplot, heat map, and correlation analysis indicated wide diversity and traits association. The environmental parameters indicated substantial amount of air moisture (> 60% relative humidity) at the critical wheat growth stages. Leaf angle showed negative association with leaf rolling, physiological and yield traits, adaxial and abaxial contact angle while leaf angle showed positive association with the stem flow water. The wettability and air moisture harvesting indicated that the genotypes (coded as 1, 7, and 18) having semi-erect to erect leaf angle, spiral rolling, and hydrophilic leaf surface (<90^o) with contact angle hysteresis less than 10^o had higher soil moisture content (6-8%) and moisture harvesting efficiency (3.5 ml).

CONCLUSIONS

These findings can provide the basis to develop self-irrigating, drought-tolerant wheat cultivars as an adaptation to climate change.

Design of Nanostructured Surfaces for Efficient Condensation by Controlling Condensation Modes

To meet the different needs of various industrial fields, it is of great application value to find a feasible method for controlling the condensation mode on the surface. Inspired by biological surfaces, tuning the surface structure and wettability is considered as a potential way to control the surface condensation behavior. Herein, the coupling effect of the geometric parameters and wettability distribution of the surface on the condensation process has been investigated systematically at the nanoscale. The results illustrate that the condensation mode is primarily determined by the nanopillar wettability when the nanopillars are densely distributed, while the substrate wettability dominates the condensation mode when the nanopillars are sparsely distributed. Besides, the effective contact area fraction is proposed, which more accurately reflects the influence of geometric parameters on the condensation rate of the nanopillar surface at the nanoscale. The condensation rate of the nanopillar surface increases with the increase of the effective contact area fraction. Furthermore, three surface design methods are summarized, which can control the condensation mode of water vapor on the surface into the dropwise condensation mode that generates Cassie-Baxter droplets, and this condensation process is very attractive for many practical applications.

Recent Growth of Wettability Gradient Surfaces: A Review

This review reports the recent progress and future prospects of wettability gradient surfaces (WGSs), particularly focusing on the governing principles, fabrication methods, classification, characterization, and applications. While transforming the inherent wettability into artificial wettability via bioinspiration, topographic micro/nanostructures are produced with changed surface energy, resulting in new droplet wetting regimes and droplet dynamic regimes. WGSs have been mainly classified in dry and wet surfaces, depending on the apparent surface states. Wettability gradient has long been documented as a surface phenomenon inducing the droplet mobility in the direction of decreasing wettability. However, it is herein critically emphasized that the wettability gradient does not always result in droplet mobility. Indeed, the sticky and slippery dynamic regimes exist in WGSs, prohibiting or allowing the droplet mobility, respectively. Lastly, the stringent bottlenecks encountered by WGSs are highlighted along with solution-oriented recommendations, and furthermore, phase change materials are strongly anticipated as a new class in WGSs. In all, WGSs intend to open up new technological insights for applications, encompassing water harvesting, droplet and bubble manipulation, controllable microfluidic systems, and condensation heat transfer, among others.

Wetting mechanism and morphological adaptation; leaf rolling enhancing atmospheric water acquisition in wheat crop-a review

Several plant species such as grasses are dominant in many habitats including arid and semi-arid areas. These species survive in these regions by developing exclusive structures, which helps in the collection of atmospheric water. Before the collected water evaporates, these structures have unique canopy structure for water transportation that plays an equivalent share in the fog-harvesting mechanism. In this review, the atmospheric gaseous water harvesting mechanisms and their affinity of measurements were discussed. Morphological adaptations and their role in the capturing of atmospheric gaseous water of various species were also discussed. The key factor for the water collection and its conduction in the wheat plant is the information of contact angle hysteresis. In wheat, leaf rolling and its association with wetting property help the plant in water retention. Morphological adaptations, i.e., leaf erectness, grooves, and prickle hairs, also help in the collection and acquisition of water droplets by stem flows in directional guide toward the base of the plant and allow its rapid uptake. Morphological adaptation strengthens the harvesting mechanism by preventing the loss of water through shattering. Thus, wheat canopy architecture can be modified to harvest the atmospheric water and directional movement of water towards the root zone for self-irrigation. Moreover, these morphological adaptations are also linked with drought avoidance and corresponding physiological processes to resist water stress. The combination of these traits together with water use efficiency in wheat contributes to a highly efficient atmospheric water harvesting system that enables the wheat plants to reduce the cost of production. It also increases the yielding potential of the crop in arid and semi-arid environments. Further investigating the ecophysiology and molecular pathways of these morphological adaptations in wheat may have significant applications in varying climatic scenarios.

Identification of the fibroin of Stigmaeopsis nanjingensis by a nanocarrier-based transdermal dsRNA delivery system

Stigmaeopsis nanjingensis (Ma and Yuan) (Acari: Tetranychidae) is an important pest of bamboo-feeding behavior and silk production by the female adult mites is seriously harmful to bamboo leaves. Due to its small size, silking and cocooning, its management is difficult. This study discusses a fast and easy method for management of the pest by disturbing the spinning behavior. Stigmaeopsis nanjingensis is host specific and feeds only on bamboo leaves. Leaf margins of bamboo are highly hydrophobic, which makes dsRNA difficult to immerse. Hence, it is a challenge to apply the commonly used feeding method to inhibit gene expression in mites. In this study, we deliver dsRNA to interfere with the expression of fibroin by body wall permeation with a nanocarrier-based delivery system. The dsRNA/nanocarrier formulation droplets could enter the body cavity within 2 min after falling on the mite. The fibroin silencing efficiency was 75.4%, and the results of electron microscopy showed that dsRNA/nanocarrier damage the morphological structure of the silk thread. This study demonstrated the effectiveness of a nanocarrier-based percutaneous dsRNA delivery system in S. nanjingensis and its effect on the fibroin gene that influences the spinning behavior of S. nanjingensis. These findings may provide a new delivery system for RNAi-based control of spider mites that utilize protective webbing in the field.

In situ ESEM using 3-D printed and adapted accessories to observe living plantlets and their interaction with enzyme and fungus

This paper describes an innovative way of using environmental scanning electron microscopy (ESEM) and the development of a suitable accessory to perform in situ observation of living seedlings in the ESEM. We provide details on fabrication of an accessory that proved to be essential for such experiments but inexpensive and easy to build in the laboratory, and present our in situ observations of the tissue and cell surfaces. Sample-specific configurations and optimized tuning of the ESEM were defined to maintain Arabidopsis and flax seedlings viable throughout repetitive exposure to the imaging conditions in the microscope chamber. This method permitted us to identify cells and tissues of the live plantlets and characterize their surface morphology during their early stage of growth and development. We could extend the application of this technique, to visualize the response of living cells and tissues to exogenous enzymatic treatments with polygalacturonase in Arabidopsis, and their interaction with hyphae of the wilt fungus Verticillium dahliae during artificial infection in flax plantlets. Our results provide an incentive to the use of the ESEM for in situ studies in plant science and a guide for researchers to optimize their electron microscopy observation in the relevant fields.

Biomimetic Wax Interfaces Facilitating Rehealable Polymer Composites

Epicuticular wax, the first protective film for numerous ground plant species, is crucial for modulating the evolution in plants. Since the waxy film is inherently thermoresponsive, many efforts focus on engineering materials for water/oil proofing, delivery, and collection, as well as microactuators by mimicking such film nature. Nonetheless, relatively fewer works address the mechanism of how the underlying substrates direct the reconstruction of waxy films while their temperature approaches the melting point. Here, we presented a strategy in which distinct frameworks of molten wax films could be examined among various substrates. Both “waxphobic” and “waxphilic” traits were first unveiled and could be achieved by the hydrophilic (water contact angle (WCA) = 42~82°) and hydrophobic (WCA = 109°) substrates, respectively. A theoretical model, based on experimental results, fluidic dynamics, and balance of surface energy, was developed to elucidate the above findings. Moreover, we demonstrated the above biomimetic epicuticular surface (BeSurface) can be applied for rewritable paper, erasable coding, and rehealable electronics without manual repairing. Remarkably, the healing time can be reduced down to 30 s, and the cycled folding test can be continued up to 500 times. All the new findings present the potentials of the BeSurface to improve the study of rehealable materials.

Leaf prickle hairs and longitudinal grooves help wheat plants capture air moisture as a water-smart strategy for a changing climate

The leaf features like trichome density, gradient grooves, and leaf wettability determine the efficiency to capture air moisture for self-irrigation in the wheat plant. Plants in water-scarce environments evolved to capture air moisture for their water needs either directly or indirectly. Structural features like cones, hairs, and grooves assist water capture. The morphology of crops such as wheat can promote self-irrigation under drought. To examine this further, 34 wheat genotypes were characterized for leaf traits in near optimal conditions in the field using a randomized complete block design with 3 replications. An association was found between morphological and physiological traits and yield using simple correlation plots. A core set of nine genotypes was subsequently evaluated for moisture harvesting ability and leaf wettability. Results showed that variation among genotypes exists for fog harvesting ability attributed to structural leaf features. Physiological traits, especially photosynthesis and water use efficiency, were positively associated with yield, negatively correlated with soil moisture at booting, and positively correlated with soil moisture at anthesis. The genotypes with deep to medium leaf grooves and dense hairs on the edges and adaxial surfaces (genotypes 7 and 18) captured the most moisture. This was a function of higher water drop rolling efficiency resulting from lower contact angle hysteresis. These results can be exploited to develop more heat and drought-tolerant crops.

Application of glycerol as carbon source for continuous drinking water denitrification using microorganism from natural biomass

The contamination of water resources by nitrate is a global problem. Indeed, traditional treatment technologies are not able to remove this ion from water. Alternatively, biological denitrification is a useful technique for natural water nitrate removal. This study aimed to evaluate the use of glycerol as a carbon source for drinking water nitrate removal via denitrification in a reactor using microorganisms from natural biomass. The experiment was carried out in a continuous fixed bed reactor using immobilised microorganisms from the vegetal Phyllostachys aurea. The tests were started in batch mode to provide cells growth and further immobilisation on the support. Then, the treatment experiments were accomplished in an up-flow continuous reactor. Ethanol was used as the primary carbon source, and it was gradually replaced by glycerol. The C:N (carbon to nitrogen) ratio and the hydraulic residence time (HRT) were evaluated. It was possible to remove 98.14% of nitrate using a C:N ratio and HRT of 3:1 and 1.51 days, respectively. The results have demonstrated that glycerol is a potential carbon source for denitrification in a continuous reactor using immobilised cells from natural biomass.

Superhydrophobic Plant Leaves: The Variation in Surface Morphologies and Wettability during the Vegetation Period

In this paper, for the first time, the surface wettability of cloverleaves and lotus leaves with specific surface structures at different growth stages is investigated. It is found that the clover exhibits water-repellent property similar to lotus leaves. Furthermore, the alternation in wettability of cloverleaves and lotus leaves during the whole vegetation period is investigated. The water contact angles and surface morphology of the leaves are measured by means of contact angle measurements and scanning electron microscopy, respectively. The chemical composition of plant leaves is analyzed utilizing Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. It is found that the wettability heavily depends on the surface structures during their growth and aging procedure, which enlightens us to design and fabricate biomimetic multifunctional superhydrophobic surfaces inspired by nature.