Adsorption and mechanism study for phosphonate antiscalant HEDP removal from reverse osmosis concentrates by magnetic La/Zn/Fe3O4@PAC composite

New design to enhance phosphonate selective removal from water by MOF confined in hyper-cross-linked resin

Although polymeric anion exchange resins can remove phosphonates, they lack selectivity for target phosphonates and are susceptible to interference by anions and other substances. Here, we developed a novel strategy via confining MIL-101(Fe)-NH2 inside commercial resins IRA-900 for high-efficient and precise phosphonate removal, accompanying with the improvement of the stability and recovery of MIL-101(Fe)-NH2. The obtained nanocomposite MIL-101(Fe)-NH2@IRA-900 (MFNI) exhibited significantly enhanced phosphonate removal in the presence of competing anions (Cl-, SO42-, NO3- and CO32-) and natural organic matter (humic acid) at high concentrations (2-4 times of phosphonate concentration). Moreover, MFNI displayed the highest phosphonate adsorption capacity (12.9 mg P/g) and the fastest adsorption kinetics (120 min) than hydrated ferric oxides modified IRA-900 (HFOI) (6.7 mg P/g, 180 min), MIL-101(Fe)-NH2 (7.6 mg P/g, 240 min) and IRA-900 (5.6 mg P/g, 360 min). Such higher adsorption affinity and anti-interference ability came from the synergistic effect of the host IRA-900 (hydrogen-bond interaction and electrostatic attraction) and the embedded MIL-101(Fe)-NH2 (ligand exchange). The depleted MFNI could be regenerated with a binary NaOH-NaCl solution and reused without significant loss of capacity. Column adsorption runs by using MFNI indicated the fresh MFNI could achieve 100 % removal of PPOA in 10.5 h continuously feeding, which offered the possibility of achieving potential large-scale applications. In general, a new MOF-confined design approach was practiced to achieve selective elimination of phosphates and to improve the stability and recovery of MOF.

Adsorption of inorganic and organic phosphorus onto polypyrrole modified red mud: Evidence from batch and column experiments

The ubiquitous presence of inorganic and organic phosphorus in wastewater and natural water bodies has deteriorated the water environment qualities and exerted significant influences on ecosystems. In this study, an effective polypyrrole modified red mud adsorbent (PRM) was optimized for the adsorptive removal of inorganic and organic phosphorus from aqueous solutions. The addition of ferric chloride and pyrrole was optimized for complete oxidation and modification of polypyrrole onto red mud. Kinetic studies illustrated that the adsorption progress was accomplished by physical and chemical adsorption. The experimental data of the optimized PRM were described well by Langmuir isotherm, and the equilibrium adsorption capacity was 32.9 and 54.7 mg/g for inorganic and organic phosphorus, respectively. The PRM showed commendable adsorption performance despite the pH conditions ranging from 3 to 11. From the effect of ion strength and X-ray photoelectron spectroscopy (XPS) tests, we found that ligand exchange is the main mechanism of orthophosphate adsorption onto PRM, while electrostatic attraction played an important role in organic phosphorus adsorption. The adsorption performance from column studies showed that the velocity of flow influenced the breakthrough time of the column but the initial concentration had minor impacts. This study would extend the potential application of polypyrrole modified red mud, acting as an efficient adsorbent for inorganic and organic phosphorus adsorption in water treatment.

Anionic Dye Removal by Polypyrrole-Modified Red Mud and Its Application to a Lab-Scale Column: Adsorption Performance and Phytotoxicity Assessment

In this study, polypyrrole-modified red mud (PRM) was prepared for the efficient removal of anionic dyes (methyl orange and Congo red) from aqueous solutions. The phytotoxicity (bean sprouts) of the dye solution before and after dye removal was investigated. Adsorption kinetics confirmed that the adsorption of methyl orange (MO) and Congo red (CR) on PRM was controlled by chemical reactions between the functional groups of polypyrrole and dyes. From Langmuir isotherm fitting, we found the theoretical adsorption capacities of MO and CR on PRM were 194.1 and 314.9 mg/g, respectively. The adsorption progress of MO and CR on PRM was found to be spontaneous and endothermic. The column studies demonstrated that, under dynamic flow, the PRM can efficiently remove MO and CR from aqueous solution, with adsorption capacities of 31.08 and 55.04 mg/g, respectively. In the toxicity test, the phytotoxicity of the column effluents (after dye removal) was significantly lowered compared to the initial dye influents. After the removal of MO and CR, the average root length of bean sprouts was increased from 3.30 cm to 5.18 cm and from 3.01 cm to 7.00 cm, respectively. These findings highlighted the efficient removal of dyes by PRM from aqueous solution, demonstrating the possible application of PRM for the removal of dye from dye-contaminated wastewaters.