Fabrication of carbon nanotube sheets and their bilirubin adsorption capacity

Carbon nitride reinforced chitosan/sodium alginate hydrogel as high-performance adsorbents for free hemoglobin removal in vitro and in vivo

Removing free hemoglobin generated during extracorporeal circulation remains a challenge. Currently, there is no adsorbent with specificity and good biosafety for removing hemoglobin. In this study, a new chitosan/sodium alginate/carbon nitride (CS/SA/C3N4) hydrogel adsorbent was prepared by blending SA with C3N4 to drop into CS/CaCl2 solution. The physicochemical properties of CS/SA/C3N4 hydrogel were evaluated using some techniques, including scanning electron microscope, Zeta potential measurement, and thermogravimetric analysis. Hemoglobin adsorption in vitro, stability, hemocompatibility, cell compatibility, inflammatory reaction and blood extracorporeal circulation in vivo were also evaluated. The findings revealed that the CS/SA/C3N4-0.4 % hydrogel exhibited an impressive adsorption capacity of 142.35 mg/g for hemoglobin. The kinetic data of hemoglobin adsorption were well-described by pseudo second-order model, while the isothermal model data conformed to the Langmuir model. The hardness and modulus of CS/SA/C3N4-0.4 % was 11.7 KPa and 94.66 KPa respectively, which indicated robust resistance to breakage. CS/SA/C3N4 demonstrated excellent hemocompatibility, biocompatibility and anti-inflammatory properties. In addition, the results of in vivo rabbit extracorporeal blood circulation experiment demonstrated that CS/SA/C3N4 could adsorb free hemoglobin from blood while maintaining high biosafety standard. Consequently, CS/SA/C3N4 hydrogel emerges as a promising candidate for use as a hemoglobin adsorbent in extracorporeal blood circulation system.

[Application of Modified Polyether Sulfone Microspheres in Hyperbilirubinemia]

Objective

To design and prepare a high efficiency bilirubin adsorbent with good mechanical properties and biocompatibility.

Methods

In this study, quaternary ammonium pyridine was designed and synthesized, and then modified polyether sulfone microspheres, or PES/p(4-VP-co-N-VP)@6 microspheres, were prepared by phase conversion and electrostatic spraying. The morphology of the polymer components and the microspheres were studied by means of nuclear magnetic resonance (NMR) spectroscopy and scanning electron microscopy. The basic properties of the microspheres and their bilirubin adsorption efficiency were tested, and the adsorption mechanism was further explored. Blood cell counts and the clotting time of the microspheres were also measured.

Results

The diameter of the modified polyether sulfone microspheres prepared in the study was approximately 700-800 μm. Compared with the original PES microspheres, the surface and internal structure of PES/p(4-VP-co-N-VP)@6 microspheres did not change significantly, and they also had a loose porous structure, with some micropores scattered around in addition to irregular large pores. Compared with the control group, the bilirubin removal effect of the modified microspheres was (94.91±0.73)% after static adsorption in bilirubin PBS buffer solution for 180 min, with the difference being statistically significant (P<0.0001). According to the findings for the clotting time, the activated partial thromboplastin time (APTT) of the blank plasma group, the control PES group, and the modified PES microsphere group were (27.57±1.25) s, (28.47±0.45) s, and (30.4±0.872) s, respectively, and the difference between the experimental group and the other two groups was statistically significant (P<0.01, P<0.05). There was no significant change in red blood cell and white blood cell counts.

Conclusion

The microspheres prepared in the study have high efficiency in bilirubin adsorption, excellent mechanical properties and thermal stability, and good blood biocompatibility, and are expected to be used in the clinical treatment of patients with liver failure.

MOF-Based Platform for Kidney Diseases: Advances, Challenges, and Prospects

Kidney diseases are important diseases that affect human health worldwide. According to the 2020 World Health Organization (WHO) report, kidney diseases have become the top 10 causes of death. Strengthening the prevention, primary diagnosis, and action of kidney-related diseases is of great significance in maintaining human health and improving the quality of life. It is increasingly challenging to address clinical needs with the present technologies for diagnosing and treating renal illness. Fortunately, metal-organic frameworks (MOFs) have shown great promise in the diagnosis and treatment of kidney diseases. This review summarizes the research progress of MOFs in the diagnosis and treatment of renal disease in recent years. Firstly, we introduce the basic structure and properties of MOFs. Secondly, we focus on the utilization of MOFs in the diagnosis and treatment of kidney diseases. In the diagnosis of kidney disease, MOFs are usually designed as biosensors to detect biomarkers related to kidney disease. In the treatment of kidney disease, MOFs can not only be used as an effective adsorbent for uremic toxins during hemodialysis but also as a precise treatment of intelligent drug delivery carriers. They can also be combined with nano-chelation technology to solve the problem of the imbalance of trace elements in kidney disease. Finally, we describe the current challenges and prospects of MOFs in the diagnosis and treatment of kidney diseases.

Preparing high-performance microspheres based on the chitosan-assisted dispersion of reduced graphene oxide in aqueous solution for bilirubin removal

The removal of excess bilirubin from blood is of great clinical importance. Reduced graphene oxide (rGO) is often used to efficiently remove bilirubin. However, thin rGO pieces tend to aggregate in the aqueous phase because they are hydrophobic. In this context, we propose an effective strategy based on the chitosan-assisted (CS-assisted) dispersion of rGO to produce high-performance bilirubin-adsorbing microspheres. CS possesses a hydrophobic CH structure, which offers strong hydrophobic interactions with rGO that assist its dispersion, and the large number of hydrophilic sites of CS increases the hydrophilicity of rGO. CS serves as a dispersant in a surfactant-like manner to achieve a homogeneous and stable CS/rGO dispersion by simply and gently stirring CS and rGO in a LiOH/KOH/urea/H2O system. Subsequently, CS/rGO hybrid microspheres were prepared by emulsification. CS ensures blood compatibility as a base material, and the entrapped rGO contributes to mechanical strength and a high adsorption capacity. The CS/rGO microspheres exhibited a high bilirubin adsorption capacity (215.56 mg/g), which is significantly higher than those of the rGO and CS microspheres. The determined mass-transfer factors revealed that the rich pores of the CS/rGO microspheres promote mass transfer during bilirubin adsorption (equilibrium is almost achieved within 30 min). The CS/rGO microspheres are promising candidates for bilirubin removal owing to a combination of high strength, blood compatibility, and high adsorption capacity.

Pharmaceutical strategies for preventing toxicity and promoting antioxidant and anti-inflammatory actions of bilirubin

Bilirubin (BR) is the final product of haem catabolism. Disruptions along BR metabolic/transport pathways resulting from inherited disorders can increase plasma BR concentration (hyperbilirubinaemia). Unconjugated hyperbilirubinemia may induce BR accumulation in brain, potentially causing irreversible neurological damage, a condition known as BR encephalopathy or kernicterus, to which newborns are especially vulnerable. Numerous pharmaceutical strategies, mostly based on hemoperfusion, have been proposed over the last decades to identify new valid, low-risk alternatives for BR removal from plasma. On the other hand, accumulating evidence indicates that BR produces health benefits due to its potent antioxidant, anti-inflammatory and immunomodulatory action with a significant potential for the treatment of a multitude of diseases. The present manuscript reviews both such aspects of BR pharmacology, gathering literature data on applied pharmaceutical strategies adopted to: (i) reduce the plasma BR concentration for preventing neurotoxicity; (ii) produce a therapeutic effect based on BR efficacy in the treatment of many disorders.

Biocompatible Composite Microspheres of Chitin/Ordered Mesoporous Carbon CMK3 for Bilirubin Adsorption and Cell Microcarrier Culture

Extra bilirubin in the blood can provoke serious illness in patients with severe liver disease. Hemoperfusion is an effective method to remove the extra bilirubin, but its application is limited by the low adsorption efficiency and poor biocompatibility of available adsorbent materials. In this study, chitin/ordered mesoporous carbon CMK3 (Ch/CMK3) microspheres were successfully prepared. Results of characterization experiments indicated that these composite microspheres possess a multilayered porous nanofibrous structure with an extremely large specific surface area (300.19 m² g^-1 ) and large pore size. Notably, the Ch/CMK3 microspheres demonstrated a high bilirubin adsorption capacity (228.19 mg g^-1 ) in phosphate buffer solution, and an outstanding bilirubin removal ratio (76.78%±4.40%) in the plasma of rabbits with hyperbilirubinemia without affecting the protein components. More importantly, the Ch/CMK3 microspheres showed no effect on other blood components, no cytotoxicity, and no systemic toxicity to mice. Cell coculture experiments revealed that the microspheres could provide a three-dimensional (3D) space to promote cell adhesion, proliferation, and nutrient exchange. These Ch/CMK3 microspheres featuring a strong ability for bilirubin adsorption and good biocompatibility could be a promising candidate in biomedical applications such as hemoperfusion, cell microcarrier, and 3D tissue engineering. This article is protected by copyright. All rights reserved.

Metal-Organic Framework Traps with Record-High Bilirubin Removal Capacity for Hemoperfusion Therapy

Adsorption-based hemoperfusion has been widely used to remove toxins from the blood of patients suffering acute liver failure (ALF). However, its detoxification effect has been severely hampered by the unsatisfactory adsorption performance of clinically used porous adsorbents, such as activated carbon (AC) and adsorption resin. Herein, two cage-based metal-organic frameworks (MOFs), PCN-333 (constructed from 4,4,4-s-triazine-2,4,6-triyl-tribenzoic acid (H₃TATB) ligands and Al₃ metal clusters) and MOF-808 (constructed from 1,3,5-benzenetricarboxylic acid (H₃BTC) ligands and Zr₆ metal clusters), are introduced for highly efficient hemoperfusion. They possess negligible hemolytic activity and can act as "bilirubin traps" to achieve outstanding adsorption performance toward bilirubin, a typical toxin related to ALF. Notably, PCN-333 shows a record-high adsorption capacity (∼1003.8 mg g^-1) among various bilirubin adsorbents previously reported. More importantly, they can efficiently adsorb bilirubin in bovine serum albumin (BSA) solution or even in 100% fetal bovine serum (FBS) due to their high selectivity. Strikingly, the adsorption rate and capacity of PCN-333 in biological solutions are approximately four times faster and 69 times higher than those of clinical AC, respectively. Findings in this work pave a new avenue to overcome the challenge of low adsorption efficiency and capacity in hemoperfusion therapy.

Selective bilirubin sensor fabrication based on doped IAO nanorods for environmental remediation

In this approach, low-dimensional facile IAO nanorods were prepared by using the hydrothermal technique, which is efficiently applied to develop a non-enzymatic sensor coated with GCE probe by electrochemical reduction method.

Construction of blood compatible chitin/graphene oxide composite aerogel beads for the adsorption of bilirubin

Excess bilirubin in blood can provoke hepatic damage and related malfunctions. Hereby we designed and constructed a novel bilirubin adsorbent, called chitin/graphene oxide (Ch/GO) composite aerogel beads, for efficient, fast and safe removal for bilirubin. The Ch/GO aerogel beads were prepared from chitin and GO in a NaOH/urea aqueous solution, followed dried by supercritical carbon dioxide. The morphology, structure and properties of the Ch/GO composite aerogel beads were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and compressive strength measurement. The results indicated that GO was successfully bound to chitin matrix with enhanced surface area, thermal stability and mechanical strength. The adsorption capacity of Ch/GO composite aerogel beads for bilirubin was examined by UV-vis spectrophotometry. Moreover, batch adsorption results revealed that the Ch/GO composite aerogel beads showed excellent bilirubin adsorption capacity (484.1 ± 16.9 mg/g) and short adsorption equilibrium time (0.5 h) under optimized condition. Furthermore, the Ch/GO aerogel beads exhibited a lower hemolysis property and improved anticoagulant property. Hence, this work provided a new strategy to develop a novel blood compatible bilirubin adsorbent, which presented good application potential for bilirubin adsorption.

Fabrication of chitin/graphene oxide composite sponges with higher bilirubin adsorption capacity

Chitin/graphene oxide (Ch/GO) composite sponges had been synthesized in 11 wt% NaOH/4 wt% urea aqueous solution by a simple method. The structure, thermal stability and mechanical properties of the composite sponges were investigated by scanning electron microscopy, Fourier-transform infrared spectroscopy, wide-angle X-ray diffraction, thermogravimetric analysis, and compressive strength measurements. The results revealed that chitin and GO were mixed homogeneously. Interestingly, the composite sponges showed meso-macroporous structure, which played an important role in improving their adsorption properties. Besides, thermal stability and mechanical properties were significantly improved compared with pure chitin sponges. Taking advantages of these fantastic characteristics, the maximum adsorption capacity of composite sponges for bilirubin was up to 422.9 mg/g under the optimized condition, which was not only significantly higher than the adsorption capacities of pure chitin sponges, but also superior to those of many reported adsorbents for removal of bilirubin. Furthermore, blood compatibility evaluations confirmed that this blended sponges had negligible hemolysis and coagulation. Therefore, this work provided a potential possibility to offer Ch/GO composite sponges for removal of bilirubin.

Construction of blood compatible lysine-immobilized chitin/carbon nanotube microspheres and potential applications for blood purified therapy

Novel lysine-immobilized chitin/carbon nanotube microspheres are prepared with excellent bilirubin adsorption properties and good blood compatibility for blood purified therapy.

Facile one-pot synthesis of magnetic nitrogen-doped porous carbon for high-performance bilirubin removal from BSA-rich solution

A magnetic nitrogen-doped porous carbon was facilely prepared and exhibited superior adsorption properties for BSA-boned bilirubin.

Nanofibrous polymeric beads from aramid fibers for efficient bilirubin removal

Polymer based hemoperfusion has been developed as an effective therapy to remove the extra bilirubin from patients.

Selective adsorption of bilirubin against albumin to oxidized single-wall carbon nanohorns

Bilirubin adsorption capacities of single-wall carbon nanohorns (SWNHs) are investigated to develop an efficient adsorbent in plasma apheresis. Pristine, thermally oxidized and H2O2-oxidized SWNHs are examined and it is demonstrated that higher oxidization levels of the SWNHs enhance bilirubin adsorption capacity owing to increase in their dispersibility and formation of nanoscaled holes on the SWNH walls. Under co-existance of albumin molecules, the bilirubin adsorption capacity of the SWNHs increases with the oxidation level whereas the albumin adsorption capacity is kept small. Bilirubin is selectively adsorbed to the SWNHs, especially to the SWNHs with high oxidation levels, against albumin. This selectivity is maintained under high-concentrations of albumin in the near-clinical environment.