Mussel-inspired surface modification of poly(L-lactide) electrospun fibers for modulation of osteogenic differentiation of human mesenchymal stem cells

Progress in the development of piezoelectric biomaterials for tissue remodeling

Piezoelectric biomaterials have demonstrated significant potential in the past few decades to heal damaged tissue and restore cellular functionalities. Herein, we discuss the role of bioelectricity in tissue remodeling and explore ways to mimic such tissue-like properties in synthetic biomaterials. In the past decade, biomedical engineers have adopted emerging functional biomaterials-based tissue engineering approaches using innovative bioelectronic stimulation protocols based on dynamic stimuli to direct cellular activation, proliferation, and differentiation on engineered biomaterial constructs. The primary focus of this review is to discuss the concepts of piezoelectric energy harvesting, piezoelectric materials, and their application in soft (skin and neural) and hard (dental and bone) tissue regeneration. While discussing the prospective applications as an engineered tissue, an important distinction has been made between piezoceramics, piezopolymers, and their composites. The superiority of piezopolymers over piezoceramics to circumvent issues such as stiffness mismatch, biocompatibility, and biodegradability are highlighted. We aim to provide a comprehensive review of the field and identify opportunities for the future to develop clinically relevant and state-of-the-art biomaterials for personalized and remote health care.

Strategically Designed Bifunctional Polydopamine Enwrapping Polycaprolactone-Hydroxyapatite-Doxorubicin Composite Nanofibers for Osteosarcoma Treatment and Bone Regeneration

This study presents a new multifunctional nanofibrous drug delivery system to provide effective combination therapy with enormous potential for the treatment of osteosarcoma. We developed a composite nanofiber scaffold comprising poly(ε-caprolactone) (PCL) and hydroxyapatite (HAp)-loaded doxorubicin (DOX) coated with polydopamine (PDA) to combine cancer cell inhibition with bone tissue regeneration. DOX was conjugated with HAp and then mixed with a PCL solution to prepare a PCL/HAp-DOX (labeled PCLDH) nanofiber. Then, in situ polymerization of PDA on the PCLDH occurred to produce the PCLDH@PDA composite nanofiber. The morphology, XRD, FT-IR, wettability, photothermal characteristics, cumulative drug release, and in vitro bioactivities were evaluated. We found that the PDA coating not only enhanced the hydrophilic properties but also controlled drug release. The PCLDH@PDA composite scaffold significantly suppressed the proliferation of bone cancer cells initially and, consequently, improved the adhesion and proliferation of human mesenchymal stem cells (hMSCs). The PDA coating boosted the composite scaffold's bioactivity, as demonstrated through ALP activity, ARS assay, and biomineralization results. This strategy offers a promising dual-function scaffold to treat residual cancer and reconstruct defects after osteosarcoma surgery.

Pulmonary decellularized extracellular matrix (dECM) modified polyethylene terephthalate three-dimensional cell carriers regulate the proliferation and paracrine activity of mesenchymal stem cells

Introduction: Mesenchymal stem cells (MSCs) possess a high degree of self-renewal capacity and in vitro multi-lineage differentiation potential. Decellularized materials have garnered considerable attention due to their elevated biocompatibility, reduced immunogenicity, excellent biodegradability, and the ability to partially mimic the in vivo microenvironment conducive to cell growth. To address the issue of mesenchymal stem cells losing their stem cell characteristics during two-dimensional (2D) cultivation, this study established three-dimensional cell carriers modified with lung decellularized extracellular matrix and assessed its impact on the life activities of mesenchymal stem cells. Methods: This study employed PET as a substrate material, grafting with polydopamine (PDA), and constructing a decellularized extracellular matrix (dECM) coating on its surface, thus creating the PET/PDA/dECM three-dimensional (3D) composite carrier. Subsequently, material characterization of the cellular carriers was conducted, followed by co-culturing with human umbilical cord mesenchymal stem cells in vitro, aiming to investigate the material's impact on the proliferation and paracrine activity of mesenchymal stem cells. Results and Discussion: Material characterization demonstrated successful grafting of PDA and dECM materials, and it had complete hydrophilicity, high porosity, and excellent mechanical properties. The material was rich in various ECM proteins (collagen I, collagen IV , laminin, fibronectin, elastin), indicating good biocompatibility. In long-term in vitro cultivation (14 days) experiments, the PET/PDA/dECM three-dimensional composite carrier significantly enhanced adhesion and proliferation of human umbilical cord-derived mesenchymal stem cells (HUCMSCs), with a proliferation rate 1.9 times higher than that of cells cultured on tissue culture polystyrene (TCPS) at day 14. Furthermore, it effectively maintained the stem cell characteristics, expressing specific antigens for HUCMSCs. Through qPCR, Western blot, and ELISA experiments, the composite carrier markedly promoted the expression and secretion of key cell factors in HUCMSCs. These results demonstrate that the PET/PDA/dECM composite carrier holds great potential for scaling up MSCs' long-term in vitro cultivation and the production of paracrine factors.

Applications of Polydopamine in Implant Surface Modification

There is great clinical demand for orthopedic and dental implant surface modification methods to prevent osseointegration failure and improve implant biological functions. Notably, dopamine (DA) can be polymerized to form polydopamine (PDA), which is similar to the adhesive proteins secreted by mussels, to form a stable bond between the bone surface and implants. Therefore, PDA has the potential to be used as an implant surface modification material with good hydrophilicity, roughness, morphology, mechanical strength, biocompatibility, antibacterial activity, cellular adhesion, and osteogenesis. In addition, PDA degradation releases DA into the surrounding microenvironment, which is found to play an important role in regulating DA receptors on both osteoblasts and osteoclasts during the bone remodeling process. Furthermore, the adhesion properties of PDA suggest its use as an intermediate layer in assisting other functional bone remodeling materials, such as nanoparticles, growth factors, peptides, and hydrogels, to form "dual modifications." The purpose of this review is to summarize the recent progress in research on PDA and its derivatives as orthopedic and dental implant surface modification materials and to analyze the multiple functions of PDA.

Application of neurotransmitters and dental stem cells for pulp regeneration: A review

Introduction

Although there have been many studies on stem cells, few have investigated how neurotransmitters and stem cell proliferation interact to regenerate dental pulp. Dental pulp regeneration is an innovative procedure for reviving dental pulp, if feasible for the entire tooth. Upon tooth injury, activated platelets release serotonin and dopamine in bulk to mobilize dental pulp stem cells to mediate natural dental repair. This has induced research on the role of neurotransmitters in increasing the proliferation rate of stem cells. This review also covers prospective future treatments for dental pulp regeneration.

Methods

A literature search was performed via PubMed and ScienceDirect from 2001 to 2022, using the keywords "neurotransmitter," "stem cell," "tooth regeneration," "tooth repair," "regenerative dentistry," and "dental pulp." Different inclusion/exclusion criteria were used, and the search was restricted to English articles.

Results

Nine publications reporting neurotransmitter interactions with stem cells for tooth and pulp regeneration were selected.

Conclusion

Neurotransmitters were found to interact with dental stem cells. Evidence pointing to neurotransmitters as a factor in the increased proliferation of stem cells was found. This review thus gives hope for tooth pulp regeneration and repair.

Gelatin hydrogel reinforced with mussel-inspired polydopamine-functionalized nanohydroxyapatite for bone regeneration

Developing high-strength hydrogels with biocompatibility and bone conductibility is still desirable for bone regeneration. The nanohydroxyapatite (nHA) was incorporated into a dopamine-modified gelatin (Gel-DA) hydrogel system to create a highly biomimetic native bone tissue microenvironment. In addition, to further increase the cross-linking density between nHA and Gel-DA, nHA was functionalized by mussel-inspired polydopamine (PDA). Compared with nHA, adding polydopamine functionalized nHA (PHA) increased the compressive strength of Gel-Da hydrogel from 449.54 ± 180.32 kPa to 611.18 ± 211.86 kPa without affecting its microstructure. Besides, the gelation time of Gel-DA hydrogels with PHA incorporation (GD-PHA) was controllable from 49.47 ± 7.93 to 88.11 ± 31.18 s, contributing to its injectable ability in clinical applications. In addition, the abundant phenolic hydroxyl group of PHA was beneficial to the cell adhesion and proliferation of Gel-DA hydrogels, leading to the excellent biocompatibility of Gel-PHA hydrogels. Notably, the GD-PHA hydrogels could accelerate the bone repair efficiency in the rat model of the femoral defect. In conclusion, our results suggest the Gel-PHA hydrogel with osteoconductivity, biocompatibility, and enhanced mechanical properties is a potential bone repair material.

A critical review on polydopamine surface-modified scaffolds in musculoskeletal regeneration

Increasing concern about age-related diseases, particularly musculoskeletal injuries and orthopedic conditions, highlights the need for strategies such as tissue engineering to address them. Surface modification has been developed to create pro-healing interfaces, personalize scaffolds and provide novel medicines. Polydopamine, a mussel-inspired adhesive polymer with highly reactive functional groups that adhere to nearly all substrates, has gained attention in surface modification strategies for biomaterials. Polydopamine was primarily developed to modify surfaces, but its effectiveness has opened up promising approaches for further applications in bioengineering as carriers and nanoparticles. This review focuses on the recent discoveries of the role of polydopamine as a surface coating material, with focus on the properties that make it suitable for tackling musculoskeletal disorders. We report the evolution of using it in research, and discuss papers involving the progress of this field. The current research on the role of polydopamine in bone, cartilage, muscle, nerve, and tendon regeneration is discussed, thus giving comprehensive overview about the function of polydopamine both in-vitro and in-vivo. Finally, the report concludes presenting the critical challenges that must be addressed for the clinical translation of this biomaterial while exploring future perspectives and research opportunities in this area.

Regulation of Macrophage Polarization Through Periodic Photo-Thermal Treatment to Facilitate Osteogenesis

The richened reactive oxygen species (ROS) and their derived excessive inflammation at bone injured sites hinder osteogenesis of endosseous Ti-based implants. Herein, anti-oxidized polydopamine (PDA) is deposited on hydrothermal growth formed hydroxyapatite (HA) nanorods on Ti to form a core-shell structural nanorod-like array with HA as a core and PDA as an amorphous shell (PDA@HA), showing not only ROS scavenging ability but also near-infrared (NIR) light derived photo-thermal effects. PDA@HA suppresses inflammation based on its ROS scavenging ability to a certain extent, while periodic photo-thermal treatment (PTT) at a mild temperature (41 ± 1 °C) further accelerates the transition of the macrophages (MΦs) adhered to PDA@HA from the pro-inflammatory (M1) phenotype to the anti-inflammatory (M2) phenotype in vitro and in vivo. Transcriptomic analysis reveals that the activation of the PI3K-Akt1 signaling pathway is responsible for the periodic PTT induced acceleration of the M1-to-M2 transition of MΦs. Acting on mesenchymal stem cells (MSCs) with paracrine cytokines of M2 macrophages, PDA@HA with mild PTT greatly promote the osteogenetic functions of MSCs and thus osteogenesis. This work paves a way of employing mildly periodic PTT to induce a favorable immunomodulatory microenvironment for osteogenesis and provides insights into its underlying immunomodulation mechanism.

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Bone defects are a common challenge for clinical orthopedic surgeons. The existing bone defect repair materials are difficult to achieve satisfactory osseointegration between the material and the bone. Therefore, it is increasingly important to find effective methods to improve the integration of the materials with the bone and thus facilitate bone defect repair. Researchers have found that polydopamine (PDA) has a structure and properties similar to the adhesive proteins secreted by mussels in nature, with good biocompatibility, bioactivity, hydrophilicity, bio-adhesion and thermal stability. PDA is therefore expected to be used as a surface modification material for bone repair materials to improve the bonding of bone repair materials to the bone surface. This paper reviews research related to PDA-modified bone repair materials and looks at their future applications.

Study on the Effect of PDA-PLGA Scaffold Loaded With Islet Cells for Skeletal Muscle Transplantation in the Treatment of Diabetes

At present, islet cells transplantation was limited by the way in which islet cells are implanted into the body, their ability to adapt to the microenvironment and the maintenance time for relieving diabetic symptoms. In order to solve this problem, we made PDA-PLGA scaffold loaded with islet cells and used it for skeletal muscle transplantation to investigate its therapeutic effect in the treatment of diabetes. The PLGA scaffold was prepared by the electrospinning method, and modified by polydopamine coating. A rat diabetic model was established to evaluate the efficacy of PDA-PLGA scaffold loaded with RINm5f islet cells through skeletal muscle transplantation. The results showed that the PDA-PLGA scaffold has good biosafety performance. At the same time, transplantation of the stent to the skeletal muscle site had little effect on the serum biochemical indicators of rats, which was conducive to angiogenesis. The PDA-PLGA scaffold had no effect on the secretory function of pancreatic islet cells. The PDA-PLGA scaffold carrying RINm5f cells was transplanted into the skeletal muscle of type I diabetic rats. 1 week after the transplantation of the PDA-PLGA cell scaffold complex, the blood glucose of the treatment group was significantly lower than that of the model group (p < 0.001) and lasted for approximately 3 weeks, which further indicated the skeletal muscle transplantation site was a new choice for islet cell transplantation in the future.

Improvement of sciatic nerve regeneration by multichannel nanofibrous membrane-embedded electro-conductive conduits functionalized with laminin

Multichannel structures in the design of nerve conduits offer potential advantages for regeneration of damaged nerves. However, lack of biochemical cues and electrical stimulation could hamper satisfactory nerve regeneration. The aim of this study was to simultaneously evaluate the effects of topographical, biological, and electrical cues on sciatic nerve regeneration. Accordingly, a series of multichannel nerve conduit was made using longitudinally-aligned laminin-coated poly (lactic-co-glycolic acid) (PLGA)/carbon nanotubes (CNT) nanofibers (NF, mean diameter: 455 ± 362 nm) in the lumen and randomly-oriented polycaprolactone (PCL) NF (mean diameter: 340 ± 200 nm) on the outer surface. In vitro studies revealed that the materials were nontoxic and able to promote cell attachment and proliferation on nanofibers and on fibrin gel. To determine the influence of laminin as biological and CNT as electrical cues on nerve regeneration, either of hollow PCL conduits, PLGA NF-embedded, PLGA/CNT NF-embedded or laminin-coated PLGA/CNT NF-embedded PCL conduits were implanted in rats. A new surgery method was utilized and results were compared with an autograft. The results of motor and sensory tests in addition to histopathological examination of the regenerated nerves demonstrated the formation of nerve fibers in laminin-coated PLGA/CNT NF-embedded PCL conduits. Results suggested that these conduits have the potential to improve sciatic nerve regeneration. Graphical abstract.

Loading of erythropoietin on biphasic calcium phosphate bioceramics promotes osteogenesis and angiogenesis by regulating EphB4/EphrinB2 molecules

Improving osteogenesis and angiogenesis using different cells and drugs is critical in the field of bone tissue engineering. Recent research has found that erythropoietin (EPO) plays an important role in both osteogenesis and angiogenesis. In this study, we grafted polydopamine and EPO onto the surface of biphasic calcium phosphate. The characterization and release property of the modified bioceramics were assessed. Cell proliferation, expression of osteoblastic and endothelial markers, and EphB4/EphrinB2 molecules were investigated while employing co-cultures of two different cells [rat vein endothelial cells (VECs) and rat bone marrow mesenchymal stromal cells (BMSCs)]. The modified bioceramics were finally implanted into the SD rats' femurs and followed by investigating the bone defect repair efficacy and the expression of EphB4/EphrinB2 molecules in vivo. The results indicated that the modified bioceramics could control the release of EPO continuously. The osteogenesis and angiogenesis were improved along with the increased expression of EphB4/EphrinB2 molecules. The expression of EphB4/EphrinB2 molecules was also significantly increased in vivo and the bone defect was repaired effectively. Overall, our findings demonstrated that EPO loading on biphasic calcium phosphate bioceramics could promote both osteogenesis and angiogenesis. The results suggest that EphB4/EphrinB2 may be crucial in the process. Graphical abstract.

Biomimetic polydopamine-laced hydroxyapatite collagen material orients osteoclast behavior to an anti-resorptive pattern without compromising osteoclasts' coupling to osteoblasts

Polydopamine-assisted modification for bone substitute materials has recently shown great application potential in bone tissue engineering due to its excellent biocompatibility and adhesive properties. A scaffold material's impact on osteoclasts is equally as important as its impact on osteoblasts when considering tissue engineering for bone defect repair, as healthy bone regeneration requires an orchestrated coupling between osteoclasts and osteoblasts. How polydopamine-functionalized bone substitute materials modulate the activity of osteoblast lineage cells has been extensively investigated, but much less is known about their impact on osteoclasts. Moreover, most of the polydopamine-functionalized materials would need to additionally load a biomolecule to exert the modulation on osteoclast activity. Herein, we demonstrated that our biomimetic polydopamine-laced hydroxyapatite collagen (PDHC) scaffold material, which does not need to load additional bioactive agent, is sufficiently able to modulate osteoclast activity in vitro. First, PDHC showed an anti-resorptive potential, characterized by decreased osteoclast differentiation and resorption capacity and changes in osteoclasts' transcriptome profile. Next, cAMP response element-binding protein (CREB) activity was found to mediate PDHC's anti-osteoclastogenic effect. Finally, although PDHC altered clastokines expression pattern of osteoclasts, as revealed by transcriptomic and secretomic analysis, osteoclasts' coupling to osteoblasts was not compromised by PDHC. Collectively, this study demonstrated the PDHC material orients osteoclast behavior to an anti-resorptive pattern without compromising osteoclasts' coupling to osteoblasts. Such a feature is favorable for the net increase of bone mass, which endows the PDHC material with great application potential in preclinical/clinical bone defect repair.

Recent developments in mussel-inspired materials for biomedical applications

Over the decades, researchers have strived to synthesize and modify nature-inspired biomaterials, with the primary aim to address the challenges of designing functional biomaterials for regenerative medicine and tissue engineering. Among these challenges, biocompatibility and cellular interactions have been extensively investigated. Some of the most desirable characteristics for biomaterials in these applications are the loading of bioactive molecules, strong adhesion to moist areas, improvement of cellular adhesion, and self-healing properties. Mussel-inspired biomaterials have received growing interest mainly due to the changes in mechanical and biological functions of the scaffold due to catechol modification. Here, we summarize the chemical and biological principles and the latest advancements in production, as well as the use of mussel-inspired biomaterials. Our main focus is the polydopamine coating, the conjugation of catechol with other polymers, and the biomedical applications that polydopamine moieties are used for, such as matrices for drug delivery, tissue regeneration, and hemostatic control. We also present a critical conclusion and an inspired view on the prospects for the development and application of mussel-inspired materials.

Enwrapping Polydopamine on Doxorubicin-Loaded Lamellar Hydroxyapatite/Poly(lactic-co-glycolic acid) Composite Fibers for Inhibiting Bone Tumor Recurrence and Enhancing Bone Regeneration

Simultaneous prevention of bone tumor recurrence and promotion of repairing bone defects resulting from tumorectomy remain a challenge. Herein, we report a polydopamine (PDA)-coated composite scaffold consisting of doxorubicin (DOX)-loaded lamellar hydroxyapatite (LHAp) and poly(lactic-co-glycolic acid) (PLGA) in an attempt to reach dual functions of tumor inhibition and bone repair. The DOX was intercalated into LHAp, and the DOX-loaded LHAp was incorporated into PLGA solution to prepare a DOX-intercalated LHAp/PLGA (labeled as DH/PLGA) scaffold that was coated with PDA to obtain a PDA@DH/PLGA scaffold. The morphology, structure, wettability, mechanical properties, drug release, biocompatibility, and in vitro and in vivo bioactivities of the PDA@DH/PLGA scaffold were evaluated. It is found that PDA coating not only improves hydrophilicity and mechanical properties, but also leads to more sustainable drug release. More importantly, the PDA@DH/PLGA scaffold shows significantly inhibited growth of tumor cells initially and subsequent improved adhesion and proliferation of osteoblasts. In addition, the PDA coating improves the bioactivity of the DH/PLGA scaffold as suggested by the in vitro biomineralization. Further in vivo study demonstrates the improved bone growth around PDA@DH/PLGA over DH/PLGA after 20 days of drug release. The dual functional PDA@DH/PLGA scaffold shows great promise in the treatment of bone tumor.

Investigation of human adipose-derived stem-cell behavior using a cell-instructive polydopamine-coated gelatin-alginate hydrogel

Hydrogels can be fabricated and designed to exert direct control over stem cells' adhesion and differentiation. In this study, we have investigated the use of polydopamine (pDA)-treatment as a binding platform for bioactive compounds to create a versatile gelatin-alginate (Gel-Alg) hydrogel for tissue engineering applications. Precisely, pDA was used to modify the surface properties of the hydrogel and better control the adhesion and osteogenic differentiation of human adipose-derived stem cells (hASCs). pDA enabled the adsorption of different types of bioactive molecules, including a model osteoinductive drug (dexamethasone) as well as a model pro-angiogenic peptide (QK). The pDA treatment efficiently retained the drug and the peptide compared to the untreated hydrogel and proved to be effective in controlling the morphology, cell area, and osteogenic differentiation of hASCs. Overall, the findings of this study confirm the efficacy of pDA treatment as a valuable strategy to modulate the biological properties of biocompatible Gel-Alg hydrogels and further extend their value in regenerative medicine.

Biofunctionalized Nanofibrous Bilayer Scaffolds for Enhancing Cell Adhesion, Proliferation and Osteogenesis

A simple and efficient method for fabricating functionalized multilayered nanofibrous scaffolds has been developed by combining electrospinning and thermally induced phase separation (TIPS) techniques. In this investigation, functionalized bilayer scaffolds were constructed using this method for bone tissue engineering, which consisted of a nanofibrous poly(lactic acid-co-glycolic acid) (PLGA) membrane as the base and a nanofibrous chitosan (CS) or gelatin (Gel) mesh as the surface layer, with the PLGA nanofibers having a biomimetic polydopamine (PDA) coating. It was shown that the PDA coating strongly bonded TIPS-formed CS or Gel networks onto PDA-coated electrospun PLGA membranes. The nanofibrous PLGA membrane provided adequate mechanical support for the whole structure, and the nanofibrous CS or Gel networks enhanced cell growth and maturation. The bioinspired surface modification of PLGA scaffolds through PDA coating could not only provide strong adhesion between the two scaffold layers but also improve biological properties of scaffolds. It was demonstrated that functionalized bilayer scaffolds could promote cell adhesion, spreading and proliferation of mouse preosteoblastic MC3T3-E1 cells and rat bone-marrow-derived stromal cells (rBMSCs). Furthermore, immunofluorescence staining and calcium deposition studies revealed that functionalized bilayer scaffolds could enhance osteogenic differentiation of MC3T3-E1 cells and rBMSCs in comparison with simple electrospun PLGA scaffolds. The functionalized bilayer scaffolds are promising structures for bone tissue engineering.

A simple, green chemistry technology for fabrication of tissue-engineered scaffolds based on mussel-inspired 3D centrifugal spun

The fabrication of 3D fibrous scaffolds with highly interconnected pores has been crucial in the development of tissue regeneration techniques. The present study describes the fabrication of 3D fibrous scaffolds by freeze-drying of polydopamine (PDA) coated centrifugal spun gelatin fibers. We wanted to combine the mussel-inspired chemistry, Maillard reaction, and the 3D microstructural advantages of centrifugal spun fibers to develop the green fibrous scaffolds at low cost, high speed, and desired mold shape. The resultant PDA-gelatin fibers exhibited a smooth 3D microstructure with a uniform formation of PDA thin ad-layer that enhanced the mechanical properties and stability of the scaffolds, and thereby decreased the degradation rate. All scaffolds showed promising properties including good dimensional and mechanical stability under wet state, optimal porosity over 94%, and high water uptake of approximately 1500%. The results of cell culture studies, further confirmed that all scaffolds exhibited appropriate biocompatibility, cell proliferation, migration, and infiltration. Particularly, the PDA-coated scaffolds showed a significant enhancement in proliferation, migration, and infiltration of HDF-GFP⁺ cells. These results show that a 3D porous fibrous scaffold with simplifying tunable density and desirable shape on a large scale can be readily prepared for different fields of tissue engineering applications.

Antibacterial activity of an NIR-induced Zn ion release film

Photothermal therapy originated from using gold nanorods (GNRs) and near-infrared (NIR) irradiation has been widely used in the antibacterial field. Zn element exhibits antimicrobial activity against various bacterial and fungal strains. In this study, a bilayer film, consisting of GNRs as the inner layer and a polydopamine layer containing Zn element (PDA@Zn) as the outer layer, was deposited on the Ti surface. The results testified that all the GNR-modified surfaces had the same photothermal conversion efficiency. The Ti surface modified with GNR and PDA@Zn layers had better antibacterial activity against E. coli and S. aureus due to the GNR-induced photothermal effect and the antibacterial Zn element. Moreover, the accelerated release of Zn ions from the PDA@Zn layer was attributed to the GNR-induced high temperature under the NIR irradiation, which caused the concentration of Zn ions to be high enough to kill the surrounding bacteria. This study illustrates that a composite surface possessing both the contact and heat-responsive antibacterial property was constructed on titanium for potential clinical applications.

A simple route to functionalising electrospun polymer scaffolds with surface biomolecules

Surface functionalisation of polymeric electrospun scaffolds with therapeutic biomolecules is often explored in regenerative medicine and tissue engineering. However, the bioconjugation method must be carefully selected to prevent partial or full loss of activity of the biomolecule following chemical manipulation. Perfluorophenyl azide bearing a N-hydroxysuccinimide (PFPA-NHS) active ester group is a versatile tool for UV-initiated covalent coupling of amine-containing molecules to hydrocarbon-based polymers, such as polydioxanone or polycaprolactone (PCL). This study therefore explored the feasibility of PFPA-NHS functionalisation of electrospun PCL scaffolds with model biomolecules. Protein conjugation was extensively explored using fluorescence staining and attachment studies, confirming the retention of amine coupling capability following photografting of PFPA-NHS to the PCL surface. The effect of the washing method used to remove unreacted PFPA was explored in Caco-2 cell viability studies, and it was determined that sonication washing is required to avoid cell death. A model enzyme, catalase, was then successfully attached to the surface of PCL scaffolds for potential applications in oncological photodynamic therapy. Catalase retained its enzymatic activity following attachment to the fibres and the majority of the enzyme (~60%) remained bound to the fibre after incubation in an aqueous environment for six days. The anticipated prolonged presentation and sustained release of proteins as a result of PFPA-NHS conjugation could be advantageous in progressing protein-based therapies.

A Biomimetic Glue Protein Modulates Hepatic Gene Expression

Glue protein as secretion from fruit fly larva plays a significant role in metamorphosis as cementing material for pupation sites. However, the biochemical composition of this macromolecule remains obscure. This study takes the advantage of high-resolution proteomic analysis to unveil the protein compositions. A glue protein group is identified as chitin-binding motifs by bioinformatic analysis. Computational modeling analysis of representative proteins illustrates the binding site between protein and chitin. A biosynthetic approach is used to fabricate a glue protein by a modified Escherichia coli recombinant system. The as-biosynthesized biomimetic glue protein is applied as an extracellular matrix to investigate its biocompatibility and functionality. It is found that the purified recombinant protein shows enhanced performance to cellular viability. This finding provides a potential biomacromolecule candidate as an extracellular matrix for cell culture.

Electrospinning for healthcare: recent advancements

This perspective explores recent developments and innovations in the electrospinning technique and their potential applications in biomedicine.

Peptide decorated demineralized dentin matrix with enhanced bioactivity, osteogenic differentiation via carboxymethyl chitosan

OBJECTIVES

To improve the biocompatibility and osteogenic activity of demineralized dentin matrix (DDM) by grafting peptides on its surface.

METHODS

DDM was obtained by pulverizing extracted human teeth that had been systematically demineralized and dried. Four groups of materials were evaluated: DDM, DDM/carboxymethyl chitosan (CMC), DDM/CMC/bone forming peptide-1 (BFP-1), and blank. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and fluorescence localization were used to characterize the surface of the DDM materials. Cell viability was assessed using a CCK8 assay, scanning electron microscopy (SEM) and in vitro osteogenesis was analyzed using real-time RT-PCR (RT-qPCR) and Alizarin red and alkaline phosphatase staining. Three different materials were implanted into mandibular bone defects in rats. After 8 weeks, bone regeneration was assessed by histomorphometry of HE-stained slides.

RESULTS

FT-IR, XPS, and fluorescence microscopy demonstrated that the DDM surfaces were successfully modified with BFP-1. The CCK8 assay indicated that the proliferation of cells is higher on the DDM/CMC/BFP-1 material than on DDM or DDM/CMC (P < 0.05). Cells were more likely to adhere to DDM/CMC/BFP-1, as observed by SEM. Greater in vitro osteogenesis was observed in the DDM/CMC/BFP-1 group which displayed stronger alkaline phosphatase activity, more alizarin red-stained nodules, and higher target gene expression, as detected by RT-qPCR (P＜0.05). HE staining of in vivo explants indicated that greater quantities of new bone had formed in the DDM/CMC/BFP-1 group.

SIGNIFICANCE

Compared with DDM, DDM/CMC/BFP-1 exhibited superior biocompatibility and osteogenesis, using a method of surface modification that has great potential for future clinical use.

Synergetic effect of growth factor and topography on fibroblast proliferation

An innovative basic fibroblast growth factor (bFGF)-loaded polycaprolactone (PCL) fibrous membrane with highly aligned structure is developed for guided tissue regeneration (GTR). The aligned membrane is fabricated by electrospinning. In order to make efficient use of bFGF, PCL electrospun fibrous membrane is firstly surface-coated by self-polymerization of dopamine, and followed by immobilization of heparin via covalent conjugation to the polydopamine (PDA) layer. Subsequently, bFGF is loaded by binding to heparin. The loading yield of bFGF on heparin-immobilized PDA-coated PCL membrane significantly increases to around 7 times as compared with that of pure PCL membrane. NIH-3T3 cells show an enhanced proliferation and exhibit a stretched morphology aligned along the direction of the fibers on the aligned membranes. However, aligned bFGF-loaded PCL membrane exhibit a similar morphology but a highest cell density prolonged till 9 days. The synergetic effect of growth factor and topography would effectively regulate cell proliferation.

PLGA Membranes Functionalized with Gelatin through Biomimetic Mussel-Inspired Strategy

Electrospun membranes have been widely used as scaffolds for soft tissue engineering due to their extracellular matrix-like structure. A mussel-inspired coating approach based on 3,4-dihydroxy-DL-phenylalanine (DOPA) polymerization was proposed to graft gelatin (G) onto poly(lactic-co-glycolic) acid (PLGA) electrospun membranes. PolyDOPA coating allowed grafting of gelatin to PLGA fibers without affecting their bulk characteristics, such as molecular weight and thermal properties. PLGA electrospun membranes were dipped in a DOPA solution (2 mg/mL, Tris/HCl 10 mM, pH 8.5) for 7 h and then incubated in G solution (2 mg/mL, Tris/HCl 10 mM, pH 8.5) for 16 h. PLGA fibers had an average diameter of 1.37 ± 0.23 µm. Quartz crystal microbalance with dissipation technique (QCM-D) analysis was performed to monitor DOPA polymerization over time: after 7 h the amount of deposited polyDOPA was 71 ng/cm2. After polyDOPA surface functionalization, which was, also revealed by Raman spectroscopy, PLGA membranes maintained their fibrous morphology, however the fiber size and junction number increased. Successful functionalization with G was demonstrated by FTIR-ATR spectra, which showed the presence of G adsorption bands at 1653 cm-1 (Amide I) and 1544 cm-1 (Amide II) after G grafting, and by the Kaiser Test, which revealed a higher amount of amino groups for G functionalized membranes. Finally, the biocompatibility of the developed substrates and their ability to induce cell growth was assessed using Neonatal Normal Human Dermal Fibroblasts.

Enhanced osteogenesis of 3D printed β-TCP scaffolds with Cissus Quadrangularis extract-loaded polydopamine coatings

Growing demand in bone tissue replacement has shifted treatment strategy from pursuing traditional autogenous and allogeneic grafts to tissue replacement with bioactive biomaterials. Constructs that exhibit the ability to support the bone structure while encouraging tissue regeneration, integration, and replacement represent the future of bone tissue engineering. The present study aimed to understand the osteogenic and mechanical effects of binder jet 3D printed, porous β-tricalcium phosphate scaffolds modified with a natural polymer/drug coating of polydopamine and Cissus Quadrangularis extract. Compression testing was used to determine the effect the polydopamine coating process had on the mechanical strength of the scaffolds. 3D printed scaffolds with and without polydopamine coatings fractured at 3.88 ± 0.51 MPa and 3.84 ± 1 MPa, respectively, suggesting no detrimental effect on strength due to the coating process. The osteogenic potential of the extract-loaded coating was tested in vitro, under static and dynamic flow conditions, and in vivo in a rat distal femur model. Static osteoblast cultures indicated polydopamine-coated samples with and without the extract exhibited greater proliferation after 3 days (p < 0.05). Similarly, polydopamine resulted in increased proliferation and alkaline phosphatase expression under dynamic flow, but alkaline phosphatase expression was significantly enhanced (p < 0.05) only in samples treated with the extract. Histological analysis of implanted scaffolds showed substantially more new bone growth throughout the implant pores at 4 weeks post-op in polydopamine and extract-loaded implants compared to pure β-tricalcium phosphate. These results indicated that implants coated with polydopamine and Cissus Quadrangularis extract facilitated osteoblast proliferation and alkaline phosphatase production and improved early bone formation and ingrowth while maintaining mechanical strength.

Applications of Polydopamine-Modified Scaffolds in the Peripheral Nerve Tissue Engineering

Peripheral nerve injury is a common and complicated traumatic disease in clinical neurosurgery. With the rapid advancement and development of medical technologies, novel tissue engineering provides alternative therapies such as nerve conduit transplantation. It has achieved significant outcomes. The scaffold surface modification is vital to the reconstruction of a pro-healing interface. Polydopamine has high chemical activity, adhesion, hydrophilicity, hygroscopicity, stability, biocompatibility, and other properties. It is often used in the surface modification of biomaterials, especially in the peripheral nerve regeneration. The present review discusses that polydopamine can promote the adhesion, proliferation, and differentiation of neural stem cells and the growth of neuronal processes. Polydopamine is widely used in the surface modification of nerve conduits and has a potential application prospect of repairing peripheral nerve injury. Polydopamine-modified scaffolds are promising in the peripheral nerve tissue engineering.

The effect of surface modification of poly-lactide-co-glycolide/carbon nanotube nanofibrous scaffolds by laminin protein on nerve tissue engineering

The presence of biological cues to promote the attachment, proliferation, and differentiation of neuronal cells is important in the process of nerve regeneration. In this study, laminin as a neurite promoting protein, has been used to modify poly-lactide-co-glycolide/carbon nanotube (PLGA/CNT) electrospun nanofibrous scaffolds by means of either mussel-inspired poly(dopamine) (PD) coating or via direct physical adsorption as a simple route for the functionalization of biomaterials. The laminin-modified scaffolds were characterized by a combination of field emission scanning electron microscopy (SEM), X-ray photoelectron spectroscopy, and contact angle measurements. Subsequently, various properties of scaffolds such as degradation time, amount of attached laminin and the rate of CNT release were investigated. The synergistic effect of topographical and biological cues for PC12 cell attachment, proliferation, and differentiation were then studied by SEM and confocal microscopy. The results of degradation study showed that laminin-modified scaffolds were biodegradable with good structural integrity that persisted about 4 weeks. The amount of laminin attached to the PLGA/CNT and PLGA/CNT-PD scaffolds was 3.12 ± 0.6 and 3.04 ± 071 μg per mg of the scaffold, respectively. Although laminin-modified scaffolds could improve cell proliferation identically, neurite extensions on the PLGA/CNT scaffold modified via PD coating (PLGA/CNT-PD-lam scaffold) were significantly longer than those observed on PLGA/CNT scaffold modified via physical adsorption (PLGA/CNT-lam scaffold) and unmodified scaffolds. Together, these results indicated that surface modification via PD coating could be a promising strategy to fabricate biomimetic scaffolds capable of sustaining longer neuronal growth for nerve tissue engineering.

Mussel-inspired polydopamine induced the osteoinductivity to ice-templating PLGA-gelatin matrix for bone tissue engineering application

In this study, poly(lactic-co-glycolic acid) (PLGA)-gelatin scaffolds were fabricated using the freeze-casting technique. Polydopamine (PDA) coating was applied on the surface of scaffolds to enhance the hydrophilicity, bioactivity, and cellular behavior of the composite constructs. Further, the synergistic effect of PDA coating and lamellar microstructure of scaffolds was evaluated on the promotion of properties. Based on morphological observations, freeze-casting constructs showed lamellar pore channels while the uniformity and pore size were slightly affected by deposition of PDA. The hydrophilicity and swelling capacity of the scaffolds were assessed using contact angle measurement and phosphate buffered saline absorption ratio. The results indicated a significant increment in water-matrix interactions following surface modification. The evaluation of the biodegradation ratio revealed the higher degree of degradation in PDA-coated samples owing to the presence of hydrophilic functional groups in the chemical structure of PDA. On the other hand, the bioactivity potential of PDA in the simulated body fluid solution confirmed the possibility of using coated constructs as a bone reconstructive substitute. The improvement of cellular attachment and filopodia formation in PDA-contained matrixes was the other benefit of the coating process. Furthermore, cellular proliferation and ALP activity were enhanced after PDA coating. The suggested PDA-coated PLGA-gelatin scaffolds can be applied in bone tissue regeneration.

One-Pot Decoration of Cupric Oxide on Activated Carbon Fibers Mediated by Polydopamine for Bacterial Growth Inhibition

Despite the widespread application of activated carbon fiber (ACF) filters in air cleaning owing to their high surface area and low price, they have certain limitations in that they facilitate bacterial growth upon prolonged use as ACF filters can provide favorable conditions for bacterial survival. The deposition of cupric oxide (CuO) on ACFs can be an effective way of resolving this problem because CuO can inhibit the proliferation of bacteria owing to its antimicrobial properties. However, finding a new method that allows the simple and uniform coating of CuO on ACF filters is challenging. Here, we demonstrate one-pot CuO deposition mediated by polydopamine (PD) to realize an ACF filter with antimicrobial activity. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) analyses reveal that CuO and PD are uniformly deposited on the ACF surface. The amount of CuO formed on the ACFs is measured by thermogravimetric analysis (TGA). Finally, the changes in surface area, pressure drop, and antimicrobial activity after coating PD-CuO on the ACFs are evaluated. The use of PD-CuO on the ACFs effectively suppresses the growth of bacteria and enhances the mechanical properties without significantly sacrificing the original characteristics of the ACF filter.

ECM Mimetic Electrospun Porous Poly (L-lactic acid) (PLLA) Scaffolds as Potential Substrates for Cardiac Tissue Engineering

Cardiac tissue engineering (CTE) aims to generate potential scaffolds to mimic extracellular matrix (ECM) for recreating the injured myocardium. Highly porous scaffolds with properties that aid cell adhesion, migration and proliferation are critical in CTE. In this study, electrospun porous poly (l-lactic acid) (PLLA) porous scaffolds were fabricated and modified with different ECM derived proteins such as collagen, gelatin, fibronectin and poly-L-lysine. Subsequently, adult human cardiac fibroblasts (AHCF) were cultured on the protein modified and unmodified fibers to study the cell behavior and guidance. Further, the cytotoxicity and reactive oxygen species (ROS) assessments of the respective fibers were performed to determine their biocompatibility. Excellent cell adhesion and proliferation of the cardiac fibroblasts was observed on the PLLA porous fibers regardless of the surface modifications. The metabolic rate of cells was on par with the conventional cell culture ware while the proliferation rate surpassed the latter by nearly two-folds. Proteome profiling revealed that apart from being an anchorage platform for cells, the surface topography has modulated significant expression of the cellular proteome with many crucial proteins responsible for cardiac fibroblast growth and proliferation.

A high-strength double network polydopamine nanocomposite hydrogel for adhesion under seawater

A mussel-inspired catechol-based strategy has been widely used in the development of underwater adhesives.

Hydroxyapatite/silver electrospun fibers for anti-infection and osteoinduction

Bone implant materials cause the most common complication of bone infections in orthopedic surgery, resulting in implant failure. Antibiotic treatment of bone infections leads to problems such as bacterial resistance and reduced osteogenic capacity. In this study, dopamine (DA) was self-polymerized on the surface of Polylactic acid (PLLA)/Hydroxyapatite (HA) nanowire composite fibers to form an adhesive polydopamine (PDA) membrane, and a stable silver-nanoparticles (Ag-NPs) coating layer was constructed on it by electrochemically driven Ag⁺ coordination and chelation through Polypyrrole (PPy) mediation, achieving steady and slow release of Ag-NPs. With optimized DA soaking time of 24 h and soaking concentration of 0.5 g·L^-1, nanoparticles were uniformly distributed on PLLA/HA/PDA/PPy/Ag composite fibers and the hydrophilicity of the composite fibers was well-behaved. Besides, the composite fibers possessed good physiological stability and 100% antibacterial rate against Escherichia coli (E. coli) as well as Staphylococcus aureus (S. aureus). In addition, the composite fibers had promoted apatite nucleation and growth on surface and good cytocompatibility with osteoblasts, indicating ability of inducing osteogenic differentiation. In summary, a multi-functional PLLA/HA/PDA/PPy/Ag composite fiber with long-term antibacterial property, bioactivity and osteoinductivity was successfully constructed by electrospinning and electrochemical deposition.

In vitro behavior of tendon stem/progenitor cells on bioactive electrospun nanofiber membranes for tendon-bone tissue engineering applications

Purpose

In order to accelerate the tendon-bone healing processes and achieve the efficient osteointegration between the tendon graft and bone tunnel, we aim to design bioactive electrospun nanofiber membranes combined with tendon stem/progenitor cells (TSPCs) to promote osteogenic regeneration of the tendon and bone interface.

Methods

In this study, nanofiber membranes of polycaprolactone (PCL), PCL/collagen I (COL-1) hybrid nanofiber membranes, poly(dopamine) (PDA)-coated PCL nanofiber membranes and PDA-coated PCL/COL-1 hybrid nanofiber membranes were successfully fabricated by electrospinning. The biochemical characteristics and nanofibrous morphology of the membranes, as well as the characterization of rat TSPCs, were defined in vitro. After co-culture with different types of electrospun nanofiber membranes in vitro, cell proliferation, viability, adhesion and osteogenic differentiation of TSPCs were evaluated at different time points.

Results

Among all the membranes, the performance of the PCL/COL-1 (volume ratio: 2:1 v/v) group was superior in terms of its ability to support the adhesion, proliferation, and osteogenic differentiation of TSPCs. No benefit was found in this study to include PDA coating on cell adhesion, proliferation and osteogenic differentiation of TSPCs.

Conclusion

The PCL/COL-1 hybrid electrospun nanofiber membranes are biocompatible, biomimetic, easily fabricated, and are capable of supporting cell adhesion, proliferation, and osteogenic differentiation of TSPCs. These bioactive electrospun nanofiber membranes may act as a suitable functional biomimetic scaffold in tendon-bone tissue engineering applications to enhance tendon-bone healing abilities.

Biomineralization guided by polydopamine-modifed poly(L-lactide) fibrous membrane for promoted osteoconductive activity

A method to mediate biomineralization of electrospinning poly(L-lactide) (PLLA) fibrous membrane assisted by polydopamine (PDA) coating was developed to obtain enhanced osteoconductive activity. The biomineralization mechanism, surface composition, morphology and hydrophilicity of the original and modified PLLA fibrous membranes were characterized. Results revealed that the PDA coating effectively accelerated the formation of hydroxyapatite (HA) on PLLA fibrous membrane and resulted a great increase in hydrophilicity. Moreover, the tensile property of PLLA fibrous membrane was enhanced by the PDA coating while almost kept unchanged by further immobilized with HA. Cells culture results indicated that the successive introduction of PDA and HA contributed to an obvious improvement in the adhesion and proliferation, as well as up-regulated alkaline phosphatase (ALP) activity and promoted osteogenic-related genes and proteins expression of MC3T3-E1 cells. Overall, the as-prepared PLLA-PDA-HA fibrous membrane can be expected as a favorable scaffold for bone tissue repair.

Application of piezoelectric cells printing on three-dimensional porous bioceramic scaffold for bone regeneration

In recent years, the additive manufacture was popularly used in tissue engineering, as the various technologies for this field of research can be used. The most common method is extrusion, which is commonly used in many bioprinting applications, such as skin. In this study, we combined the two printing techniques; first, we use the extrusion technology to form the ceramic scaffold. Then, the stem cells were printed directly on the surface of the ceramic scaffold through a piezoelectric nozzle. We also evaluated the effects of polydopamine (PDA)-coated ceramic scaffolds for cell attachment after printing on the surface of the scaffold. In addition, we used fluorescein isothiocyanate to simulate the cell adhered on the scaffold surface after ejected by a piezoelectric nozzle. Finally, the attachment, growth, and differentiation behaviors of stem cell after printing on calcium silicate/polycaprolactone (CS/PCL) and PDACS/PCL surfaces were also evaluated. The PDACS/PCL scaffold is more hydrophilic than the original CS/PCL scaffold that provided for better cellular adhesion and proliferation. Moreover, the cell printing technology using the piezoelectric nozzle, the different cells can be accurately printed on the surface of the scaffold that provided and analyzed more information of the interaction between different cells on the material. We believe that this method may serve as a useful and effective approach for the regeneration of defective complex hard tissues in deep bone structures.

Synthetic scaffolds for musculoskeletal tissue engineering: cellular responses to fiber parameters

Tissue engineering often uses synthetic scaffolds to direct cell responses during engineered tissue development. Since cells reside within specific niches of the extracellular matrix, it is important to understand how the matrix guides cell response and then incorporate this knowledge into scaffold design. The goal of this review is to review elements of cell-matrix interactions that are critical to informing and evaluating cellular response on synthetic scaffolds. Therefore, this review examines fibrous proteins of the extracellular matrix and their effects on cell behavior, followed by a discussion of the cellular responses elicited by fiber diameter, alignment, and scaffold porosity of two dimensional (2D) and three dimensional (3D) synthetic scaffolds. Variations in fiber diameter, alignment, and scaffold porosity guide stem cells toward different lineages. Cells generally exhibit rounded morphology on nanofibers, randomly oriented fibers, and low-porosity scaffolds. Conversely, cells exhibit elongated, spindle-shaped morphology on microfibers, aligned fibers, and high-porosity scaffolds. Cells migrate with higher velocities on nanofibers, aligned fibers, and high-porosity scaffolds but migrate greater distances on microfibers, aligned fibers, and highly porous scaffolds. Incorporating relevant biomimetic factors into synthetic scaffolds destined for specific tissue application could take advantage of and further enhance these responses.

Effect of mussel adhesive protein coating on osteogenesis in vitro and osteointegration in vivo to alkali-treated titanium with nanonetwork structures

Purpose: On the basis of reasonable superposition of various surface treatment methods, alkali-treated titanium with nanonetwork structures (TNS) was coated with mussel adhesive protein (MAP) and named TNS-MAP. The aims were to optimize the biological properties of TNS, endue it with new properties, and enhance its utility in clinical dental applications. Methods: TNS disks were coated with MAP and the product surface was characterized. Its osteogenic properties were determined by evaluating its effects on cell adhesion, cell proliferation, the expression of osteogenesis-related genes, and in vivo experiments. Results: The treated materials showed excellent hydrophilicity, good surface roughness, and advantages of both TNS and MAP. TNS-MAP significantly promoted initial cell attachment especially after 15 mins and 30 mins. At every time point, cell adhesion and proliferation, the detection rate of osteogenesis-related markers in the extracellular matrix, and the expression of osteogenesis-related genes were markedly superior on TNS-MAP than the control. The in vivo experiments revealed that TNS-MAP promoted new bone growth around the implants and the bone-implant interface. Conclusion: We verified through in vitro and in vivo experiments that we successfully created an effective TNS-MAP composite implant with excellent biocompatibility and advantages of both its TNS and MAP parent materials. Therefore, the new biocomposite implant material TNS-MAP may potentially serve in practical dentistry and orthopedics.

Fabrication and Evaluation of 3D Printed Poly(l-lactide) Scaffold Functionalized with Quercetin-Polydopamine for Bone Tissue Engineering

Quercetin (Qu), a bioflavonoid, has been reported to positively affect bone metabolism. For the first time, Qu with different concentrations was utilized to functionalize 3D-printed poly(l-lactide) (PLLA) scaffold with the aid of a polydopamine (PDA) layer through a convenient and effective way in this study. Results revealed that the coexistence of PDA and Qu can capacitate the 3D-printed PLLA scaffold to possess rougher surface, as well as better hydrophilicity and compressive properties. The resulting PDA- and Qu-modified PLLA scaffolds (Qu/PD-PLLA) can sustainably release Qu to some extent, which is more beneficial to the proliferation and attachment of MC3T3-E1 cells, upregulating ALP activity and calcium nodules as well as promoting the expression of related osteogenic genes and proteins. More significantly, such a positive impact of the Qu on the cell affinity and osteogenic activity played in a dose-dependent manner. This study revealed the potential of the 3D-printed Qu/PD-PLLA scaffolds with a certain amount of Qu as bone-repair materials.