Interfacial characterization of Pluronic PE9400 at biocompatible (air–water and limonene–water) interfaces

Enhancement of polymer thermoresponsiveness and drug delivery across biological barriers by addition of small molecules

Thermoresponsive polymers that undergo sol-gel transitions in the physiological temperature range have been widely used in biomedical applications. However, some commercially and clinically available thermoresponsive materials, particularly poloxamer 407 (P407), have the significant drawback of insufficient gel strength, which limit their performance. Furthermore, co-delivery with some small molecules, including chemical permeation enhancers (CPEs) can further impair the physical properties of P407. Here, we have developed a thermoresponsive platform by combination of CPEs with the poloxamer P188 to enable gelation at physiological temperatures and enhance gel strength. P188 gels at 60 °C, which is far above the physiological range. In combination with limonene (LIM) and sodium dodecyl sulfate (SDS), P188 gels at ∼25 °C, a temperature that in useful for biomedical applications. Gelation behavior was studied by small angle neutron scattering (SANS) experiments, which identified micelle-to-cubic mesophase transitions with increasing temperature. Analysis of the SANS intensities revealed that P188 micelles became larger as LIM or SDS molecules were incorporated, making it easier to form a micellar gel structure. P188-3CPE (i.e., 2% LIM, 1% SDS and 0.5% bupivacaine (BUP)) had low viscosity at room temperature, facilitating administration, but rapidly gelled at body temperature. P188-3CPE enabled the flux of the antibiotic ciprofloxacin across the TM and completely eradicated otitis media from nontypable Haemophilus influenzae (NTHi) in chinchillas after a single administration.

Experimental techniques to study protein-surfactant interactions: New insights into competitive adsorptions via drop subphase and interface exchange

Protein surfactant (PS) interactions is an essential topic for many fundamental and technological applications such as life science, nanobiotechnology processes, food industry, biodiesel production and drug delivery systems. Several experimental techniques and data analysis approaches have been developed to characterize PS interactions in bulk and at interfaces. However, to evaluate the mechanisms and the level of interactions quantitatively, e.g., PS ratio in complexes, their stability in bulk, and reversibility of their interfacial adsorption, new experimental techniques and protocols are still needed, especially with relevance for in-situ biological conditions. The available standard techniques can provide us with the basic understanding of interactions mainly under static conditions and far from physiological criteria. However, detailed measurements at complex interfaces can be formidable due to the sophisticated tools required to carefully probe nanometric phenomena at interfaces without disturbing the adsorbed layer. Tensiometry-based techniques such as drop profile analysis tensiometry (PAT) have been among the most powerful methods for characterizing protein's and surfactant's adsorption layers at interfaces via measuring equilibrium and dynamic interfacial tension and dilational rheology analysis. PAT provides us with insightful data such as kinetics and isotherms of adsorption and related surface activity parameters. However, the data analysis and interpretation can be challenging for mixed protein-surfactant solutions via standard PAT experimental protocols. The combination of a coaxial double capillary (micro flow exchange system) with drop profile analysis tensiometry (CDC-PAT) is a promising tool to provide valuable results under different competitive adsorption/desorption conditions via novel experimental protocols. CDC-PAT provides unique experimental protocols to exchange the droplet subphase in a continuous dynamic mode during the in-situ analysis of the corresponding interfacial adsorbed layer. The contribution of diffusion/convection mechanisms on the kinetics of the adsorption/desorption processes can also be investigated using CDC-PAT. Here, firstly, we review the commonly available techniques for characterizing protein-surfactant interactions in the bulk phase and at interfaces. Secondly, we give an overview for applications of the coaxial double capillary PAT setup for investigations of mixed protein-surfactant adsorbed layers and address recently developed protocols and analysis procedures. Exploring the competitive sequential adsorption of proteins and surfactants and the reversibility of pre-adsorbed layers via the subphase exchange are the particular experiments we can perform using CDC-PAT. Also the sequential and simultaneous competitive adsorption/desorption processes of some ionic and nonionic surfactants (SDS, CTAB, DTAB, and Triton) and proteins (bovine serum albumin (BSA), lysozyme, and lipase) using CDC-PAT are discussed. Last but not least, the fabrication of micro-nanocomposite layers and membranes are additional applications of CDC-PAT discussed in this work.

DPD Study on the Interfacial Properties of PEO/PEO-PPO-PEO/PPO Ternary Blends: Effects of Pluronic Structure and Concentration

Using the method of dissipative particle dynamics (DPD) simulations, we investigated the interfacial properties of PEO/PEO-PPO-PEO/PPO ternary blends composed of the Pluronics L64(EO₁₃PO₃₀EO₁₃), F68(EO₇₆PO₂₉EO₇₆), F88(EO₁₀₄PO₃₉EO₁₀₄), or F127(EO₁₀₆PO₇₀EO₁₀₆) triblock copolymers. Our simulations show that: (i) The interfacial tensions (γ) of the ternary blends obey the relationship γF68 < γL64 < γF88 < γF127, which indicates that triblock copolymer F68 is most effective in reducing the interfacial tension, compared to L64, F88, and F127; (ii) For the blends of PEO/L64/PPO and the F64 copolymer concentration ranging from c_cp = 0.2 to 0.4, the interface exhibits a saturation state, which results in the aggregation and micelle formation of F64 copolymers added to the blends, and a lowered efficiency of the L64 copolymers as a compatibilizer, thus, the interfacial tension decreases slightly; (iii) For the blends of PEO/F68/PPO, elevating the Pluronic copolymer concentration can promote Pluronic copolymer enrichment at the interfaces without forming the micelles, which reduces the interfacial tension significantly. The interfacial properties of the blends contained the PEO-PPO-PEO triblock copolymer compatibilizers are, thus, controlled by the triblock copolymer structure and the concentration. This work provides important insights into the use of the PEO-PPO-PEO triblock copolymer as compatibilizers in the PEO and PPO homopolymer blend systems.

Effect of Hyaluronic Acid and Pluronic-F68 on the Surface Properties of Foam as a Delivery System for Polidocanol in Sclerotherapy

The use of foams to deliver bioactive agents and drugs is increasing in pharmaceutics. One example is the use of foam as a delivery system for polidocanol (POL) in sclerotherapy, with the addition of bioactive compounds to improve the delivery system being a current subject of study. This work shows the influence of two bioactive additives on the structure and stability of POL foam: hyaluronic acid (HA) and Pluronic-F68 (F68). HA is a natural non-surface-active biopolymer present in the extracellular matrix while F68 is a surface-active poloxamer that is biocompatible with plasma-derived fluids. Both additives increase the bulk viscosity of the sample, improving foam stability. However, HA doubled and F68 quadruplicated the foam half lifetime of POL. HA reduced the size and polydispersity of the bubble size distribution and increased the surface elasticity with respect to POL. Both facts have a positive impact in terms of foam stability. F68 also altered bubble structure and increased surface elasticity, again contributing to the enhancement of foam stability. The surface characterization of these systems is important, as in foam sclerotherapy it is crucial to assure the presence of POL at the surface of the bubbles in order to deliver the sclerosant agent in the target vein.

Transport of Flexible, Oil-Soluble Diblock and BAB Triblock Copolymers to Oil/Water Interfaces

The connection between block copolymer architecture and adsorption at fluid/fluid interfaces is poorly understood. We characterize the interfacial properties of a well-defined series of polyethylene oxide/polydimethyl siloxane (PDMS) diblock and BAB triblock copolymers at the dodecane/water interface. They are oil-soluble and quite flexible because of their hydrophobic PDMS block. Rather than relying on equilibrium interfacial measurements for which it is difficult to mitigate experimental uncertainty during adsorption, we combine measurements of steady-state adsorption, dilatational rheology, and adsorption/desorption dynamics. Steady-state interfacial pressure is insensitive to interfacial curvature and mostly agrees with theory. Adsorption does not occur in the diffusive limit as is the case for many aqueous, small-molecule surfactants. Dilatational rheology reveals differences in behavior between the diblocks and triblocks, and all interfaces possess elasticities below the thermodynamic limit. Desorption dynamics show that material exchange between the interface and the neighboring fluid occurs too slowly to relax dilatational stresses. The mechanism of relaxation occurs at the interface, likely from the reorientation of adsorbed chains.

Kinetically Enhanced Fabrication of Homogeneous Biomimetic and Functional Emulsion Droplets

Characterized by a fluid and deformable interface, ligand-functionalized emulsion droplets are used as model probes to address biophysical, biological, and developmental questions. Functionalization protocols usually rely on the use of headgroup-modified phospholipids that are dissolved in the oil phase prior to emulsification, leading to a broad range of surface densities within a given droplet population. With the aim to coat particles homogeneously with biologically relevant lipids and proteins (streptavidin, immunoglobulins, etc.), we developed a reliable surface decoration protocol based on the use of polar cosolvents to dissolve the lipids in the aqueous phase after the droplet production. We show that the surface density of the lipids at the interface has a narrow normal distribution for droplets having the same size. We performed titration isotherms for lipids and biologically relevant proteins on these drops. Then, we studied the influence of the presence of surfactants in the medium on lipid insertion and compared the results for a range of polar cosolvents of increasing polarity. To assess both the generality and the biocompatibility of the method, we show that we can produce more sophisticated, monodisperse functional magnetic emulsions with a very high surface homogeneity. Using an oil denser than the surrounding culture medium, we show that IgG-coated droplets can be used as probes for phagocytosis experiments.

Structural Characterization of Pluronic Micelles Swollen with Perfume Molecules

The insertion in nonionic polymer micelles (Pluronics F127) of seven essential oils and some of the pure compounds that compose them was investigated by complementary differential scanning calorimetry, small-angle X-ray, and neutron scattering (SAXS and SANS). The study revealed various insertion and swelling behaviors for the different oil molecules, an evidence of different interaction mechanisms involved between oils and Pluronic monomers. Thermodynamically, the addition of oil increased the micellization enthalpy due to an enhanced release of water molecules, leading subsequently to a decrease of the critical micellar temperature (CMT). Structurally, with oil, SANS revealed the presence of large aggregates at lower temperature than the CMT for which their size is maximal. Above the CMT, the size decreased and the equilibrium was reached a few degrees after the temperature corresponding to the maximum of the endothermic peak. At 37 °C, the detailed combined SANS and SAXS analysis demonstrated a partial phase separation between the oil and the poly(propylene oxide) core. The hydrophilic stabilizing poly(ethylene oxide) shell remains unchanged.

Surface Mechanical and Rheological Behaviors of Biocompatible Poly((D,L-lactic acid-ran-glycolic acid)-block-ethylene glycol) (PLGA-PEG) and Poly((D,L-lactic acid-ran-glycolic acid-ran-ε-caprolactone)-block-ethylene glycol) (PLGACL-PEG) Block Copolymers at the Air-Water Interface

Air-water interfacial monolayers of poly((D,L-lactic acid-ran-glycolic acid)-block-ethylene glycol) (PLGA-PEG) exhibit an exponential increase in surface pressure under high monolayer compression. In order to understand the molecular origin of this behavior, a combined experimental and theoretical investigation (including surface pressure-area isotherm, X-ray reflectivity (XR) and interfacial rheological measurements, and a self-consistent field (SCF) theoretical analysis) was performed on air-water monolayers formed by a PLGA-PEG diblock copolymer and also by a nonglassy analogue of this diblock copolymer, poly((D,L-lactic acid-ran-glycolic acid-ran-caprolactone)-block-ethylene glycol) (PLGACL-PEG). The combined results of this study show that the two mechanisms, i.e., the glass transition of the collapsed PLGA film and the lateral repulsion of the PEG brush chains that occur simultaneously under lateral compression of the monolayer, are both responsible for the observed PLGA-PEG isotherm behavior. Upon cessation of compression, the high surface pressure of the PLGA-PEG monolayer typically relaxes over time with a stretched exponential decay, suggesting that in this diblock copolymer situation, the hydrophobic domain formed by the PLGA blocks undergoes glass transition in the high lateral compression state, analogously to the PLGA homopolymer monolayer. In the high PEG grafting density regime, the contribution of the PEG brush chains to the high monolayer surface pressure is significantly lower than what is predicted by the SCF model because of the many-body attraction among PEG segments (referred to in the literature as the "n-cluster" effects). The end-grafted PEG chains were found to be protein resistant even under the influence of the "n-cluster" effects.

Subphase exchange experiments with the pendant drop technique

INTRODUCTION

The development of the coaxial double capillary 15 years ago opened up the possibility to undertake accurate desorption and penetration studies of interfacial layers in the pendant drop technique. Drop and bubble methods offer several advantages with respect to other interfacial techniques. They allow a more stringent control of the environmental conditions, use smaller amounts of material and provide a much higher interface/volume ratio than in conventional Langmuir Troughs.

EXPERIMENTAL

The coaxial capillary was developed 15 years ago at the University of Granada as an accessory for the pendant drop surface film balance. It allows exchanging the subphase of the drop without disturbing the surface film and preserving the drop volume throughout the subphase exchange. Hence, this methodology enables one to carry out a great variety of interfacial studies well beyond the usual adsorption profiles. Penetration studies, sequential adsorption measurements, desorption kinetics, reversibility of adsorption and testing of enzymatic treatments on interfacial layers are amongst the principal applications. The coaxial capillary has been recently upgraded to a multi-exchange device which has boosted its applicability. It can be now used to address multilayer formation, create soft interfacial nano-composites such as membranes, polyelectrolyte assemblies and simulate in vitro digestion in a single droplet.

APPLICATIONS

This review aims to compile the experimental work done, using the pendant drop subphase exchange in the last decade, and how its use has provided new insights into the surface/interfacial properties of many different materials. Special emphasis is placed on recent work regarding simulation of in vitro digestion in order to address issues relating to metabolism degradation profiles. The use of this methodology when dealing with interfacial studies allows setting the foundations of interfacial engineering technology. Based on subphase exchange experiments, we aim to develop models for competitive adsorption of different compounds at the interface and build up layer-by-layer interfacial structures. Future challenges comprise the design of finely adjusted nanoengineering systems, based on multilayer assemblies with tailored functionalities, to match the application demand.

Formulation and optimization by experimental design of eco-friendly emulsions based on d-limonene

d-Limonene is a natural occurring solvent that can replace more pollutant chemicals in agrochemical formulations. In the present work, a comprehensive study of the influence of dispersed phase mass fraction, ϕ, and of the surfactant/oil ratio, R, on the emulsion stability and droplet size distribution of d-limonene-in-water emulsions stabilized by a non-ionic triblock copolymer surfactant has been carried out. An experimental full factorial design 3(2) was conducted in order to optimize the emulsion formulation. The independent variables, ϕ and R were studied in the range 10-50 wt% and 0.02-0.1, respectively. The emulsions studied were mainly destabilized by both creaming and Ostwald ripening. Therefore, initial droplet size and an overall destabilization parameter, the so-called turbiscan stability index, were used as dependent variables. The optimal formulation, comprising minimum droplet size and maximum stability was achieved at ϕ=50 wt%; R=0.062. Furthermore, the surface response methodology allowed us to obtain the formulation yielding sub-micron emulsions by using a single step rotor/stator homogenizer process instead of most commonly used two-step emulsification methods. In addition, the optimal formulation was further improved against Ostwald ripening by adding silicone oil to the dispersed phase. The combination of these experimental findings allowed us to gain a deeper insight into the stability of these emulsions, which can be applied to the rational development of new formulations with potential application in agrochemical formulations.

Block copolymers at interfaces: interactions with physiological media

Triblock copolymers (also known as Pluronics or poloxamers) are biocompatible molecules composed of hydrophobic and hydrophilic blocks with different lengths. They have received much attention recently owing to their applicability for targeted delivery of hydrophobic compounds. Their unique molecular structure facilitates the formation of dynamic aggregates which are able to transport lipid soluble compounds. However, these structures can be unstable and tend to solubilize within the blood stream. The use of nanoemulsions as carriers for the lipid soluble compounds appears as a new alternative with improved protection against physiological media. The interfacial behavior of block copolymers is directly related to their peculiar molecular structure and further knowledge could provide a rational use in the design of poloxamer-stabilized nanoemulsions. This review aims to combine the new insights gained recently into the interfacial properties of block copolymers and their performance in nanoemulsions. Direct studies dealing with the interactions with physiological media are also reviewed in order to address issues relating metabolism degradation profiles. A better understanding of the physico-chemical and interfacial properties of block copolymers will allow their manipulation to modulate lipolysis, hence allowing the rational design of nanocarriers with efficient controlled release.