Revealing deposition mechanism of colloid particles on human serum albumin monolayers

QCM-D Investigations of Anisotropic Particle Deposition Kinetics: Evidences of the Hydrodynamic Slip Mechanisms

Deposition kinetics of positively charged polymer microparticles, characterized by prolate spheroid shape, at silica and gold sensors was investigated using the quartz microbalance (QCM) technique. Reference measurements were also performed for positively charged polymer particles of spherical shape and the same mass as the spheroids. Primarily, the frequency and bandwidth shifts for various overtones were measured as a function of time. It is shown that the ratio of these signals is close to unity for all overtones. These results were converted to the dependence of the frequency shift on the particle coverage, directly determined by atomic force microscopy and theoretically interpreted in terms of the hydrodynamic model. A quantitative agreement with experiments was attained considering particle slip relative to the ambient oscillating flow. In contrast, the theoretical results pertinent to the rigid contact model proved inadequate. The particle deposition kinetics derived from the QCM method was compared with theoretical modeling performed according to the random sequential adsorption approach. This allowed to assess the feasibility of the QCM technique to furnish proper deposition kinetics for anisotropic particles. It is argued that the hydrodynamic slip effect should be considered in the interpretation of QCM kinetic results acquired for bioparticles, especially viruses.

Nanoparticle and bioparticle deposition kinetics

Mechanisms and kinetic of particle deposition at solid surfaces leading to the formation of self-assembled layers of controlled structure and density were reviewed. In the first part theoretical aspects were briefly discussed, comprising limiting analytical solutions for the linear transport under flow and diffusion. Methods of the deposition kinetics analysis for non-linear regimes affected by surface blocking were also considered. Characteristic monolayer formation times under diffusion and flow for the nanoparticle size range were calculated. In the second part illustrative experimental results obtained for micro- and nanoparticles were discussed. Deposition at planar substrates was analyzed with emphasis focused on the stability of layers and the release kinetics of silver particles. Applicability of the quartz microbalance measurements (QCM) for quantitative studies of nanoparticle deposition kinetic was also discussed. Except for noble metal and polymer particles, representative results for virus deposition at abiotic surfaces were analyzed. Final part of the review was devoted to nanoparticle corona formation at polymer carrier particles investigated by combination of the concentration depletion, AFM, SEM and the in situ electrokinetic method. It is argued that the results obtained for colloid particles can be used as reliable reference systems for interpretation of protein and other bioparticle deposition, confirming the thesis that simple is universal.

Microparticle Deposition on Human Serum Albumin Layers: Unraveling Anomalous Adsorption Mechanism

Human serum albumin (HSA) layers are adsorbed on mica under controlled diffusion transport at pH 3.5 and various ionic strengths. The surface concentration of HSA is directly determined by AFM imaging of single molecules. It is shown that the adsorption kinetics derived in this way is quantitatively described using the random sequential (RSA) adsorption model. The electrokinetic characteristics of the HSA layers at various pHs comprising their zeta potential are acquired in situ while using the streaming potential method. It is shown that at pH 3.5 the zeta potential of mica becomes positive for HSA concentrations above 3000 μm−2. At larger pHs, HSA layers exhibit negative zeta potential for the entire range of coverage. Thorough characteristics of these monolayers at various pHs were performed applying the colloid deposition method involving negatively charged polystyrene microparticles. The kinetics of their deposition and their maximum coverage are determined as a function of the HSA layer surface concentration, pH, and ionic strength. An anomalous deposition of microparticles on substrates also exhibiting a negative zeta potential is observed, which contradicts the Derjaguin, Landau, Vervey, Overbeek (DLVO) theory. This effect is interpreted in terms of heterogeneous charge distribution that results from molecule concentration fluctuations. It is also shown that the maximum concentration of microparticles abruptly decreases with the electric double-layer thickness that is regulated by changing ionic strength, which indicates that their deposition is governed by electrostatic interactions. One can argue that the results obtained in this work can be exploited as useful reference data for the analysis of deposition phenomena of bioparticles on protein layers.

Adsorption kinetic of myoglobin on mica and silica - Role of electrostatic interactions

Adsorption kinetics of myoglobin molecules on mica and silica was studied using the atomic force microscopy (AFM), the colloid enhancement and the quartz microbalance (QCM) methods. Measurements were carried out for the NaCl concentration of 0.01 and 0.15 M as a function of pH comprising pH 7.4 stabilized by the PBS buffer. The electrophoretic mobility measurements enabled to derive the molecules zeta potential as a function of pH. The isoelectric point appearing at pH 5, is lower than that predicted from the theoretical calculations of the nominal dissociation charge. The AFM investigations confirmed that myoglobin molecules irreversibly adsorb at pH 3.5 yielding well-defined layers of single molecules. These layers were characterized using the colloid enhancement method involving polymer microparticles for pH range 3-9. The microparticle deposition kinetics was adequately interpreted in terms of a hybrid random sequential adsorption model. It is confirmed that the myoglobin layers exhibit a negligible zeta potential at pH equal to 5 in accordance with the electrophoretic mobility measurements. Analogous adsorption kinetic measurements were performed for the silica substrate using QCM and AFM. It is observed that myoglobin molecules irreversibly adsorb at pH 3.5 forming stable layers of single molecules. On the other hand, its adsorption kinetics at larger pHs was much slower exhibiting a poorly defined maximum coverage. This was attributed to aggregation of the myoglobin solutions due to their vanishing charge. The kinetic QCM runs were adequately interpreted in terms of a theoretical model combining the Smoluchowski aggregation theory with the convective diffusion mass transfer theory.