Ion concentration effect (Na+ and Cl-) on lipid vesicle formation

Sequential gentle hydration increases encapsulation in model protocells

Small, spherical vesicles are a widely used chassis for the formation of model protocells and investigating the beginning of compartmentalized evolution. Various methods exist for their preparation, with one of the most common approaches being gentle hydration, where thin layers of lipids are hydrated with aqueous solutions and gently agitated to form vesicles. An important benefit to gentle hydration is that the method produces vesicles without introducing any organic contaminants, such as mineral oil, into the lipid bilayer. However, compared to other methods of liposome formation, gentle hydration is much less efficient at encapsulating aqueous cargo. Improving the encapsulation efficiency of gentle hydration would be of broad use for medicine, biotechnology, and protocell research. Here, we describe a method of sequentially hydrating lipid thin films to increase encapsulation efficiency. We demonstrate that sequential gentle hydration significantly improves encapsulation of water-soluble cargo compared to the traditional method, and that this improved efficiency is dependent on buffer composition. Similarly, we also demonstrate how this method can be used to increase concentrations of oleic acid, a fatty acid commonly used in origins of life research, to improve the formation of vesicles in aqueous buffer.

Giant vesicles form in physiological saline and encapsulate pDNA by the modified electroformation method

Giant vesicles (GVs) are used to study the structures and functions of cells and cell membranes. Electroformation is the most commonly used method for GV preparation. However, the electroformation of GVs is hindered in highly concentrated ionic solutions, limiting their application as cell models for research under physiological conditions. In this study, giant multilayer vesicles were successfully generated in physiological saline using a modified electroformation device by adding an insulating layer between the two electrode plates. The influence of the electric frequency and strength on the electroformation of GVs in physiological saline was explored, and a possible mechanism for this improvement was assessed. It has been shown that an insulating layer between the two electrodes can improve the electroformation of GVs in physiological saline by increasing the electrical impedance, which is weakened by the saline solution, thereby restoring the reduced effective electric field strength. Furthermore, macromolecular plasmid DNA (pDNA) was successfully encapsulated in the electroformed GVs of the modified device. This modified electroformation method may be useful for generating eukaryotic cell models under physiological conditions.

Development of tLyP-1 functionalized nanoliposomes with tunable internal water phase for glioma targeting

tLyP-1 peptide is verified to recognize neuropilin (NRP) receptors overexpressed on the surface of both glioma cells and endothelial cells of angiogenic blood vessels. In the present study, tLyP-1 was conjugated with DSPE-PEG2000 to prepare tLyP-1-DSPE-PEG2000, which was further employed to prepare tLyP-1 functionalized nanoliposome (tLyP-1-Lip) to achieve enhancing target of glioblastoma. Process parameters were systematically studied to investigate the feasibility of tuning the internal water phase of nanoliposomes and encapsulating more Temozolomide (TMZ). The particle size, Zeta potential, and encapsulation efficiency of tLyP-1-Lip/TMZ were fully characterized in comparison with conventional nanoliposomes (Lip-TMZ) and PEGylated nanoliposomes (PEG-Lip/TMZ). The release behaviors of TMZ from PEG-Lip/TMZ and tLyP-1-Lip/TMZ are similar and slower than TMZ-Lip in acidic solutions. The tLyP-1-Lip/TMZ demonstrated the strongest cytotoxicity in comparison with TMZ-Lip and PEG-Lip/TMZ in both U87 and HT22 cells, and displayed the highest cellular internalization. The pharmacokinetic studies in rats revealed that tLyP-1-Lip/TMZ showed a 1.4-fold (p < 0.001) increase in AUCINF_obs and a 1.4-fold decrease (p < 0.01) in clearance compared with PEG-Lip/TMZ. We finally confirmed by in vivo imaging that tLyP-1-Lip were able to penetrate the brains and tumors of mice.

Sequential gentle hydration increases encapsulation in model protocells

Small, spherical vesicles are a widely used chassis for the formation of model protocells and investigating the beginning of compartmentalized evolution. Various methods exist for their preparation, with one of the most common approaches being gentle hydration, where thin layers of lipids are hydrated with aqueous solutions and gently agitated to form vesicles. An important benefit to gentle hydration is that the method produces vesicles without introducing any organic contaminants, such as mineral oil, into the lipid bilayer. However, compared to other methods of liposome formation, gentle hydration is much less efficient at encapsulating aqueous cargo. Improving the encapsulation efficiency of gentle hydration would be of broad use for medicine, biotechnology, and protocell research. Here, we describe a method of sequentially hydrating lipid thin films to increase encapsulation efficiency. We demonstrate that sequential gentle hydration significantly improves encapsulation of water-soluble cargo compared to the traditional method, and that this improved efficiency is dependent on buffer composition. Similarly, we also demonstrate how this method can be used to increase concentrations of oleic acid, a fatty acid commonly used in origins of life research, to improve the formation of vesicles in aqueous buffer.

Giant Unilamellar Vesicle Electroformation: What to Use, What to Avoid, and How to Quantify the Results

Since its inception more than thirty years ago, electroformation has become the most commonly used method for growing giant unilamellar vesicles (GUVs). Although the method seems quite straightforward at first, researchers must consider the interplay of a large number of parameters, different lipid compositions, and internal solutions in order to avoid artifactual results or reproducibility problems. These issues motivated us to write a short review of the most recent methodological developments and possible pitfalls. Additionally, since traditional manual analysis can lead to biased results, we have included a discussion on methods for automatic analysis of GUVs. Finally, we discuss possible improvements in the preparation of GUVs containing high cholesterol contents in order to avoid the formation of artifactual cholesterol crystals. We intend this review to be a reference for those trying to decide what parameters to use as well as an overview providing insight into problems not yet addressed or solved.

Rational design of dynamic imine surfactants for oil-water emulsions: Learning from oil-induced reversible dynamic imine bond formation

HYPOTHESIS

Dynamic imine surfactants (DIS) can be constructed by the formation of dynamic imine bonds (Dibs) between aromatic aldehydes and aliphatic amines in water. Because of the nature of Dibs in water, a thermodynamic equilibrium state was achieved between the DIS and aldehyde and amine precursors to form a dynamic combinatorial library (DCL). When the DIS served as sole emulsifier to form oil-H₂O emulsions, the precursors migrated between the H₂O phase and the oil phase, which altered the DCL equilibrium. The DIS concentration and emulsion stability also changed.

EXPERIMENTS

By mixing 4-(2-sulfobetaine-ethoxy)-benzaldehyde (SBBA) and aliphatic amines of C_nH_2n+1NH₂ (n = 4, BA; n = 6, HA; n = 8, OA; n = 10, DA) in water, four amphoteric DIS (SBBA-BA/HA/OA/DA) were prepared. Dib formation was characterized using ¹H NMR. The DIS surface activity was studied by surface tension and fluorescence probe methods. The reversible switching of DIS and its wormlike micelles were explored.

FINDINGS

SBBA-OA (or SBBA-DA) DIS was not a suitable emulsifier for stable hydrocarbon (HC)-H₂O emulsions. OA and DA were more soluble in the HC phase than the H₂O phase. The precursors of OA and DA migrated from the H₂O to the HC phase, and the thermodynamic equilibrium state of DCL shifted towards Dib dissociation. The Dib could be regenerated by HC phase removal. A novel strategy where volatile HC (such as pentane) was used as a trigger was developed to switch the DIS reversibly and its self-assemblies (such as wormlike micelles) in water without inorganic salt accumulation. The SBBA-HA (or SBBA-BA) DIS was a suitable emulsifier for stable emulsions because HA and BA were more soluble in the H₂O phase.

Essentials in saline pharmacology for nasal or respiratory hygiene in times of COVID-19

PURPOSE

Nasal irrigation or nebulizing aerosol of isotonic or hypertonic saline is a traditional method for respiratory or nasal care. A recent small study in outpatients with COVID-19 without acute respiratory distress syndrome suggests substantial symptom resolution. We therefore analyzed pharmacological/pharmacodynamic effects of isotonic or hypertonic saline, relevant to SARS-CoV-2 infection and respiratory care.

METHODS

Mixed search method.

RESULTS

Due to its wetting properties, saline achieves an improved spreading of alveolar lining fluid and has been shown to reduce bio-aerosols and viral load. Saline provides moisture to respiratory epithelia and gels mucus, promotes ciliary beating, and improves mucociliary clearance. Coronaviruses and SARS-CoV-2 damage ciliated epithelium in the nose and airways. Saline inhibits SARS-CoV-2 replication in Vero cells; possible interactions involve the viral ACE2-entry mechanism (chloride-dependent ACE2 configuration), furin and 3CLpro (inhibition by NaCl), and the sodium channel ENaC. Saline shifts myeloperoxidase activity in epithelial or phagocytic cells to produce hypochlorous acid. Clinically, nasal or respiratory airway care with saline reduces symptoms of seasonal coronaviruses and other common cold viruses. Its use as aerosol reduces hospitalization rates for bronchiolitis in children. Preliminary data suggest symptom reduction in symptomatic COVID-19 patients if saline is initiated within 48 h of symptom onset.

CONCLUSIONS

Saline interacts at various levels relevant to nasal or respiratory hygiene (nasal irrigation, gargling or aerosol). If used from the onset of common cold symptoms, it may represent a useful add-on to first-line interventions for COVID-19. Formal evaluation in mild COVID-19 is desirable as to establish efficacy and optimal treatment regimens.

Mechanism study of how lipid vesicle electroformation is suppressed by the presence of sodium chloride

Giant lipid vesicles (GLVs) are usually adopted as models of cell membranes and electroformation is the most commonly used method for GLV formation. However, GLV electroformation are known to be suppressed by the presence of salt and the mechanism is not clear so far. In this paper, the lipid hydration and GLV electroformation were investigated as a function of the concentration of sodium chloride by depositing the lipids on the bottom substrates and top substrates. In addition, the electrohydrodynamic force generated by the electroosmotic flow (EOF) on the lipid phase was calculated with COMSOL Multiphysics. It was found that the mechanisms for the failure of GLV electroformation in salt solutions are: 1) the presence of sodium chloride decreases the membrane permeability to aqueous solution by accelerating the formation of well-packed membranes, suppressing the swelling and detachment of the lipid membranes; 2) the presence of sodium chloride decreased the electrohydrodynamic force by increasing the medium conductivity.

Formation of Giant Lipid Vesicles in the Presence of Nonelectrolytes—Glucose, Sucrose, Sorbitol and Ethanol

Lipid vesicles, especially giant lipid vesicles (GLVs), are usually adopted as cell membrane models and their preparation has been widely studied. However, the effects of some nonelectrolytes on GLV formation have not been specifically studied so far. In this paper, the effects of the nonelectrolytes, including sucrose, glucose, sorbitol and ethanol, and their coexistence with sodium chloride, on the lipid hydration and GLV formation were investigated. With the hydration method, it was found that the sucrose, glucose and sorbitol showed almost the same effect. Their presence in the medium enhanced the hydrodynamic force on the lipid membranes, promoting the GLV formation. GLV formation was also promoted by the presence of ethanol with ethanol volume fraction in the range of 0 to 20 percent, but higher ethanol content resulted in failure of GLV formation. However, the participation of sodium chloride in sugar solution and ethanol solution stabilized the lipid membranes, suppressing the GLV formation. In addition, the ethanol and the sodium chloride showed the completely opposite effects on lipid hydration. These results could provide some suggestions for the efficient preparation of GLVs.