Formation mechanism of human serum albumin monolayers on positively charged polymer microparticles

Kinetics of Human Serum Albumin Adsorption on Polycation Functionalized Silica

The adsorption kinetics of human serum albumin (HSA) on bare and poly-L-arginine (PARG)-modified silica substrates were investigated using reflectometry and atomic force microscopy (AFM). Measurements were carried out at various pHs, flow rates and albumin concentrations in the 10 and 150 mM NaCl solutions. The mass transfer rate constants and the maximum protein coverages were determined for the bare silica at pH 4.0 and theoretically interpreted in terms of the hybrid random sequential adsorption model. These results were used as reference data for the analysis of adsorption kinetics at larger pHs. It was shown that the adsorption on bare silica rapidly decreased with pH and became negligible at pH 7.4. The albumin adsorption on PARG-functionalized silica showed an opposite trend, i.e., it was negligible at pH 4 and attained maximum values at pH 7.4 and 150 mM NaCl, the conditions corresponding to the blood serum environment. These results were interpreted as the evidence of a significant role of electrostatic interactions in the albumin adsorption on the bare and PARG-modified silica. It was also argued that our results can serve as useful reference data enabling a proper interpretation of protein adsorption on substrates functionalized by polyelectrolytes.

In vitro and in vivo characterization of human serum albumin-based PEGylated nanoparticles for BDNF and NT3 codelivery

The utilization of neurotrophins in medicine shows significant potential for addressing neurodegenerative conditions, such as age-related macular degeneration (AMD). However, the therapeutic use of neurotrophins has been restricted due to their short half-life. Here, we aimed to synthesize PEGylated nanoparticles based on electrostatic-driven interactions between human serum albumin (HSA), a carrier for adsorption; neurotrophin-3 (NT3); and brain-derived neurotrophic factor (BDNF). Electrophoretic (ELS) and multi-angle dynamic light scattering (MADLS) revealed that the PEGylated HSA-NT3-BDNF nanoparticles ranged from 10 to 430 nm in diameter and exhibited a low polydispersity index (<0.4) and a zeta potential of -8 mV. Based on microscale thermophoresis (MST), the estimated dissociation constant (Kd) from the HSA molecule of BDNF was 1.6 μM, and the Kd of NT3 was 732 μM. The nanoparticles were nontoxic toward ARPE-19 and L-929 cells in vitro and efficiently delivered BDNF and NT3. Based on the biodistribution of neurotrophins after intravitreal injection into BALB/c mice, both nanoparticles were gradually released in the mouse vitreous body within 28 days. PEGylated HSA-NT3-BDNF nanoparticles stabilize neurotrophins and maintain this characteristic in vivo. Thus, given the simplicity of the system, the nanoparticles may enhance the treatment of a variety of neurological disorders in the future.

The Control of the Expansion or Compression of Colloidal Crystals Lattice with Salt Solution

Tuning the lattice spacing or stop bands holds great significance in the design and application of materials with colloidal crystals. Typically, particle surface modifications or the application of external physical fields are needed. In this study, we demonstrated the ability to expand or compress the lattice of colloidal crystals simply by utilizing a salt solution, without the need for any special treatments to the colloidal particles. We found that by only considering the diffusiophoresis effect we cannot explain the reversion of lattice expansion to lattice compression with the increase in the salt concentration and that the diffusioosmotic flow originating from the container wall must be taken into account. Further analysis revealed that variations in the salt concentration altered the relative amplitudes between diffusiophoresis and diffusioosmosis through changing the zeta potentials of the particles and the wall, and the competition between the particle diffusiophoresis and wall diffusioosmosis lay at the center of the underlying mechanism.

Mimicking Pseudo-Virion Interactions with Abiotic Surfaces: Deposition of Polymer Nanoparticles with Albumin Corona

Adsorption of human serum albumin (HSA) molecules on negatively charged polystyrene microparticles was studied using the dynamic light scattering, the electrophoretic and the solution depletion methods involving atomic force microscopy. Initially, the physicochemical characteristics of the albumin comprising the hydrodynamic diameter, the zeta potential and the isoelectric point were determined as a function of pH. Analogous characteristics of the polymer particles were acquired, including their size and zeta potential. The formation of albumin corona on the particles was investigated in situ by electrophoretic mobility measurements. The size, stability and electrokinetic properties of the particles with the corona were also determined. The particle diameter was equal to 125 nm, which coincides with the size of the SARS-CoV-2 virion. The isoelectric point of the particles appeared at a pH of 5. The deposition kinetics of the particles was determined by atomic force microscopy (AFM) under diffusion and by quartz microbalance (QCM) under flow conditions. It was shown that the deposition rate at a gold sensor abruptly vanished with pH following the decrease in the zeta potential of the particles. It is postulated that the acquired results can be used as useful reference systems mimicking virus adsorption on abiotic surfaces.

Nanoparticle and bioparticle deposition kinetics

Mechanisms and kinetic of particle deposition at solid surfaces leading to the formation of self-assembled layers of controlled structure and density were reviewed. In the first part theoretical aspects were briefly discussed, comprising limiting analytical solutions for the linear transport under flow and diffusion. Methods of the deposition kinetics analysis for non-linear regimes affected by surface blocking were also considered. Characteristic monolayer formation times under diffusion and flow for the nanoparticle size range were calculated. In the second part illustrative experimental results obtained for micro- and nanoparticles were discussed. Deposition at planar substrates was analyzed with emphasis focused on the stability of layers and the release kinetics of silver particles. Applicability of the quartz microbalance measurements (QCM) for quantitative studies of nanoparticle deposition kinetic was also discussed. Except for noble metal and polymer particles, representative results for virus deposition at abiotic surfaces were analyzed. Final part of the review was devoted to nanoparticle corona formation at polymer carrier particles investigated by combination of the concentration depletion, AFM, SEM and the in situ electrokinetic method. It is argued that the results obtained for colloid particles can be used as reliable reference systems for interpretation of protein and other bioparticle deposition, confirming the thesis that simple is universal.

Formation of Myoglobin Corona at Polymer Microparticles

Adsorption of myoglobin molecules at negatively charged polystyrene microparticles was studied using the dynamic light scattering (DLS), electrophoresis (LDV) and the solution depletion method involving atomic force microscopy (AFM). The measurements were carried out at pH 3.5 and NaCl concentration of 10−2 and 0.15 M. Initially, the stability of myoglobin solutions and the particle suspensions as a function of pH were determined. Afterward, the formation of myoglobin molecule corona was investigated via the direct electrophoretic mobility measurements, which were converted to the zeta potential. The experimental results were quantitatively interpreted in terms of the general electrokinetic model. This approach yielded the myoglobin corona coverage under in situ conditions. The maximum hard corona coverage was determined using the AFM concentration depletion method. It was equal to 0.9 mg m−2 for the NaCl concentration in the range 0.01 to 0.15 M and pH 3.5. The electrokinetic properties of the corona were investigated using the electrophoretic mobility measurements for a broad pH range. The obtained results confirmed that thorough physicochemical characteristics of myoglobin molecules can be acquired using nM amounts of the protein. It was also argued that this method can be used for performing electrokinetic characteristics of other proteins such as the SARS-Cov-2 spike protein exhibiting, analogously to myoglobin, a positive charge at acidic pHs.

The crucial role of a protein corona in determining the aggregation kinetics and colloidal stability of polystyrene nanoplastics

Nanosized plastics are considered as being a class of contaminants of emerging concern. The interaction between nanoplastics and proteins may significantly influence the environmental behavior and fate of nanoplastics. Here, we employed time-resolved dynamic light scattering to explore the aggregation kinetics and stability of polystyrene nanoparticles (PSNPs) exposed to a model globular protein (bovine serum albumin, BSA) in the presence of a number of typical electrolytes (NaCl, CaCl₂, and Na₂SO₄). With the increase of the BSA concentration, the amount of BSA adsorbed on the surface of negatively charged PS-Bare (non-modified) and PS-COOH (carboxyl-modified) increased, resulting in higher dispersibility in comparison to the treatment without BSA. This stabilization effect derived from the protein corona structure was revealed by combining characterization techniques and visualized by transmission electron microscopy. Upon addition of NaCl and CaCl₂, the aggregation of positively charged PS-NH₂ (amino-modified) was inhibited by the BSA addition possibly due to the screening of the attractive patch-charge force and the competition for adsorption of cations between PS-NH₂ and the protein. When Na₂SO₄ was present in the suspension, BSA addition significantly increased PS-NH₂ aggregation rate due to patch-charge attraction and the high performance of SO₄^2- in attaching to particles and charge neutralization. These findings shed light on the interactions between PSNPs and proteins, which were shown to vary with the composition of the surface coatings of PSNPs. The newly gained knowledge will help us to forecast the transport and fate of PSNPs in natural aqueous systems.

Use of a quartz crystal microbalance platform to study protein adsorption on aluminum hydroxide vaccine adjuvants: Focus on phosphate-hydroxide ligand exchanges

Aluminum hydroxide (AH) salts are widely used as vaccine adjuvants and controlling antigen-AH interactions is a key challenge in vaccine formulation. In a previous work, we have developed a quartz crystal microbalance (QCM) platform, based on stable AH-coated sensors, to explore the mechanisms of model antigen adsorption. The QCM study of bovine serum albumin (BSA) adsorption at different pH and ionic strength (I) values showed that protein adsorption on AH adjuvant at physiological pH cannot be explained mainly by electrostatic interactions, in contrast with previous reports. Here, we exploit further the developed QCM platform to investigate the role of phosphate-hydroxyl ligand exchanges in the adsorption mechanism of BSA, human serum albumin (HSA) and ovalbumin (OVA) on two commercial AH adjuvants. BSA adsorption decreased on immobilized AH particles previously treated with KH₂PO₄, highlighting the role of exchangeable sites on AH particles in the adsorption process. BSA and OVA were dephosphorylated by treatment with an acid phosphatase to decrease their phosphate content by about 80% and 25%, respectively. Compared to native BSA, adsorption of dephosphorylated BSA decreased significantly on one AH adjuvant at pH 7. Adsorption of dephosphorylated OVA was comparable to the one of native OVA. Further QCM assays showed that phospho-amino acids (PO₄-serine and PO₄-threonine) displaced previously adsorbed BSA and OVA from AH particles in conditions that were depending on the protein and the AH. Taken together, these observations suggest that phosphate-hydroxyl ligand exchange is an important adsorption mechanism of proteins on AH. These results moreover confirm that the developed AH-coated QCM sensors offer a new platform for the study of antigen adsorption, to the benefit of vaccine formulation.

Myoglobin molecule charging in electrolyte solutions

The compensated charge of myoglobin molecule in electrolyte solution is considerably smaller than the nominal charge.

Human Serum Albumin Adsorption Kinetics on Silica: Influence of Protein Solution Stability

Adsorption kinetics of human serum albumin (HSA) on silica substrates was studied using optical waveguide lightmode spectroscopy (OWLS) and quartz microbalance (QCM) techniques. Measurements were performed at pH 3.5, 5.6, and 7.4 for various bulk suspension concentrations and ionic strengths. The diffusion coefficient measurements showed that for pH 3.5 the HSA molecules are stable for NaCl concentrations from 10^-3 to 0.15 M. This allowed us to precisely determine the mass transfer rate coefficients for the OWLS and QCM cells. The experimental data were adequately interpreted in terms of a hybrid random sequential adsorption model. The OWLS maximum coverage of HSA at pH 3.5, which is equal to 1.3 mg m^-2, agrees with the QCM result and with previous results derived from streaming potential measurements. Thus, the results obtained at pH 3.5 served as reference data for the analysis of adsorption kinetics at higher pHs. In this way, it was confirmed that the adsorption kinetics of HSA molecules at pH 5.6 and 7.4 was considerably slower than at pH 3.5. This effect was attributed to aggregation of HSA solutions and interpreted in terms of a theoretical model combining the Smoluchowski aggregation theory with the convective diffusion mass transfer theory. New analytical equations were derived that can be used for the interpretation of other protein adsorption from unstable solutions.

In Situ Characterization of Protein Corona Formation on Silica Microparticles Using Confocal Laser Scanning Microscopy Combined with Microfluidics

In biological fluids, proteins bind to particles, forming so-called protein coronas. Such adsorbed protein layers significantly influence the biological interactions of particles, both in vitro and in vivo. The adsorbed protein layer is generally described as a two-component system comprising "hard" and "soft" protein coronas. However, a comprehensive picture regarding the protein corona structure is lacking. Herein, we introduce an experimental approach that allows for in situ monitoring of protein adsorption onto silica microparticles. The technique, which mimics flow in vascularized tumors, combines confocal laser scanning microscopy with microfluidics and allows the study of the time-evolution of protein corona formation. Our results show that protein corona formation is kinetically divided into three different phases: phase 1, proteins irreversibly and directly bound (under physiologically relevant conditions) to the particle surface; phase 2, irreversibly bound proteins interacting with preadsorbed proteins, and phase 3, reversibly bound "soft" protein corona proteins. Additionally, we investigate particle-protein interactions on low-fouling zwitterionic-coated particles where the adsorption of irreversibly bound proteins does not occur, and on such particles, only a "soft" protein corona is formed. The reported approach offers the potential to define new state-of-the art procedures for kinetics and protein fouling experiments.

In vivo tailor-made protein corona of a prodrug-based nanoassembly fabricated by redox dual-sensitive paclitaxel prodrug for the superselective treatment of breast cancer

Prodrug self-nanoassemblies have many advantages for anticancer drug delivery, including high drug loading rate, resistance to recrystallization, and on-demand drug release. However, few studies have focused on their protein corona, which is inevitably formed after entering the blood and determines their subsequent fates in vivo. To actively tune the protein corona of prodrug nanoassemblies, three maleimide-paclitaxel prodrugs were synthesized via different redox-sensitive linkers (ester bond, thioether bond and disulfide bond). After incubation with rat plasma, the surface maleimide groups effectively captured albumins, resulting in albumin-enriched protein corona. The recruited albumin corona enabled enhanced tumor accumulation and facilitated cellular uptake, ensuring the high-efficiency delivery of nanoassemblies to tumor cells. Surprisingly, we found that the traditionally reduction-sensitive disulfide bond could also be triggered by reactive oxygen species (ROS). Such a redox dual-responsive drug release property of the disulfide bond-containing prodrug nanoassemblies further increased the selectivity in cytotoxicity between normal and tumor cells. Moreover, the disulfide bond-containing prodrug nanoassemblies exhibited the highest antitumor efficacy in vivo compared to marketed Abraxane® and other prodrug nanoassemblies. Thus, the fabrication of the maleimide-decorated disulfide bond bridged prodrug nanoassembly, integrating a tunable protein corona and on-demand drug release, is a promising strategy for improved cancer chemotherapy.

Kinetics of human serum albumin adsorption at silica sensor: Unveiling dynamic hydration function

Adsorption kinetics of human serum albumin (HSA) at a silica substrate was studied using the QCM-D and AFM methods. Measurements were performed at pH 3.5 for various bulk suspension concentrations and ionic strengths. The QCM experimental data were compared with the dry coverage of HSA derived from AFM and from the solution of the mass transfer equation. In this way, the dynamic hydration functions and water factors of HSA monolayers were quantitatively evaluated as a function of dry coverage for various ionic strengths. Using the hydration functions, the HSA adsorption runs derived from QCM-D measurements were converted to the dry coverage vs. the time relationships. In this way, the maximum coverage of irreversibly bound HSA molecules was determined. It was equal to 0.35 and 1.4 mg m^-2 for NaCl concentration of 0.001 and 0.15 M, respectively. These results agree with previous experimental data derived by streaming potential measurements for mica and with theoretical modeling. Therefore, the side-on mechanism of HSA adsorption at silica sensor at pH 3.5 was confirmed. Also, a quantitative analysis of the desorption runs allowed one to calculate the binding energy of the reversibly bound HSA fraction. Beside significance to basic science, these results enable to develop a robust technique of preparing HSA monolayers at silica sensor of well-controlled coverage and molecule orientation.