Biocompatibility nanoprobe of MXene N-Ti3C2 quantum dot/Fe3+ for detection and fluorescence imaging of glutathione in living cells

Biocompatibility FeOOH QD@ATP-BODIPY nanocomposite for glutathione detection and intracellular imaging

Monitoring of glutathione has attracted considerable attention owing to its biological and clinical significance. An eco-friendly, economic, simple, biocompatible probe with excellent sensitivity and selectivity is very important. Herein, FeOOH QD@ATP-BODIPY nanocomposite was fabricated from one-step synthesized FeOOH quantum dots (FeOOH QD) and commercial boron-dipyrromethene-conjugated adenosine 5'-triphosphate (ATP-BODIPY) for glutathione (GSH) sensing in solutions and living cells. Three fascinate merits of FeOOH QD were confirmed: (a) as fluorescence quencher for ATP-BODIPY, (b) as selective recognizer of GSH and (c) with carrier effects and membrane permeability. The construction and response mechanism of the nanocomposite was based on the competitive coordination chemistry and redox reaction of FeOOH QD between GSH and phosphate group of ATP-BODIPY. Under the optimal conditions, the detection limit for GSH was as low as 68.8 nM. Excellent linear range of 0.2-400 μM was obtained. Furthermore, the chemical response of the nanocomposite exhibits high selectivity toward GSH over other electrolytes and biomolecules. It was successfully applied for GSH determination in human serum samples. The MTT assay exhibited FeOOH QD@ATP-BODIPY nanocomposite own good biocompatibility. FeOOH QD@ATP-BODIPY respond to GSH in living cells in situ was also proved via fluorescence imaging. These suggested that the FeOOH QD@ATP-BODIPY nanocomposite had potential application in biological and clinical applications.

Fe-based cyclically catalyzing double free radical nanogenerator for tumor-targeted chemodynamic therapy

The prosperity of chemodynamic therapy provides a new strategy for tumor treatment. However, the lack of reactive oxygen species and the specific reductive tumor microenvironment have limited the further development of chemodynamic therapy. Herein, we reported a Fe-based cyclically catalyzing double free radical system for tumor therapy by catalyzing exogenous potassium persulfate (K2S2O8) and endogenous hydrogen peroxide (H2O2). Sufficient amounts of Fe3+ and S2O82- were delivered to tumor sites via tumor-targeted hyaluronic acid (HA) encapsulated mesoporous silica nanoparticles (MSNs) and released under the dual stimulation of acid and hyaluronidase (HAase) in the tumor microenvironment. Fe3+ was reduced to Fe2+ by the reducing agents of loaded tannic acid (TA) and intracellular glutathione (GSH), and Fe2+ was subsequently reacted with S2O82- and endogenous H2O2 to produce two types of ROS (˙OH and SO4-˙), showing an excellent anti-tumor effect. This process not only supplied Fe2+ for the catalysis of active substances, but also reduced the concentration of reduced substances in cells, which was conducive to the existence of free radicals for the efficient killing of tumor cells. Therefore, this iron-based catalysis of exogenous and exogenous active substances to realize a dual-radical oncotherapy nanosystem would provide a new perspective for chemodynamic therapy.

Advances in MXene-based luminescence sensing strategies

MXenes have attracted the attention of many researchers as one of the latest two-dimensional (2D) materials over the last decade. Their great potential for biosensing has also been fully exploited after the discovery of their unique properties such as superior optical properties, excellent hydrophilicity, good thermal stability, excellent mechanical property, high electrical conductivity, biocompatibility, large surface area, and ease of surface functionalization. In the MXene-based luminescence sensing strategy, MXenes typically appear in the form of nanosheets, quantum dots and modified MXene nanocomposites, and they are utilized as different sensing platforms or as a luminescence source. In this review, we focused on the MXene-based luminescence sensing strategies, including fluorescence, electrochemiluminescence and chemiluminescence sensors and the comparison of their performance. Finally, the perspectives of the MXene-based luminescence sensors are discussed.

Recent Advances in MXene Quantum Dots: A Platform with Unique Properties for General-Purpose Functional Materials with Novel Biomedical Applications

Developing new, high-performance materials is a prerequisite for technological advancement. In comparison to bulk materials, quantum dots have a number of good advantages due to their small size, high surface area, and quantum dimensions. Quantum dots, two-dimensional materials with lateral dimensions less than 100 nm, can be generated by the quantum confinement effect. Mxene quantum dots (MQDs) retain some of their two-dimensional characteristics. They also exhibit novel physicochemical properties, including enhanced dispersibility in aqueous and nonaqueous phases, modification or doping capabilities, and photoluminescence. MQDs, due to their unique and diverse properties, have been receiving a great deal of attention as new members of the Mxene group and wide use for biotechnology, bioimaging, optoelectronics, catalysis, cancer therapy, etc. This review aims to provide an overview of the synthesis of MQDs, their optical properties, and their cancer therapy applications. MQDs exhibit remarkable photothermal and photodynamic features and can be suitable for bioimaging. In addition to obtaining bioimaging, photothermal therapy (PTT) and photodynamic therapy (PDT) effects simultaneously, MQDs have high biocompatibility in vitro and in vivo, providing evidence of their potential clinical utility. Herein, recent developments and future prospects concerning MQDs biomedical applications are discussed.

Facile preparation of bimetallic Au-Cu nanoclusters as fluorescent nanoprobes for sensitive detection of Cr3+ and S2O82- ions

Metallic nanoclusters (NCs) have attracted special attention from researchers due to their interesting optical properties. In this experiment, we proposed a facile one-step method for the synthesis of bimetallic gold-copper nanoclusters (AuCuNCs). The prepared AuCuNCs were characterized by fluorescence spectroscopy (FL), UV-vis absorption spectrum, transmission electron microscopy (TEM), etc. The emission peak of the prepared AuCuNCs was located at 455 nm and showed blue luminescence under the excitation of 365 nm UV light. Furthermore, after the addition of Cr³⁺ and S₂O₈^2- ions, the FL emission intensity of AuCuNCs was significantly reduced at 455 nm and there was a color change of diminished blue luminescence under UV lamp. The AuCuNCs exhibited excellent linearity and sensitivity for the detection of Cr³⁺ and S₂O₈^2- ions. The limits of detection (LOD) for the Cr³⁺ and S₂O₈^2- ions were calculated to be 1.5 and 0.037 μM, respectively. Finally, the recoveries of Cr³⁺ and S₂O₈^2- ions in Runxi Lake and tap water were measured by standard addition recovery test and were 96.66 ∼ 116.29 %, 95.75 ∼ 119.4 %.

A novel fluorescent nanoprobe based on potassium permanganate-functionalized Ti3C2 QDs for the unique "turn-on" dual detection of Cr3+ and Hg2+ ions

Titanium carbide quantum dots (Ti₃C₂ QDs) were synthesized by ammonia-assisted hydrothermal method. We also synthesized potassium permanganate (KMnO₄)-functionalized Ti₃C₂ QDs (Mn-QDs) by modifying Ti₃C₂ nanosheets with KMnO₄ and then cutting the functional nanosheets into Mn-QDs. The Ti₃C₂ QDs and Mn-QDs were characterized by fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR), UV-vis spectrophotometry (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Furthermore, the modified Mn-QDs have strong luminescence ability and good dispersion stability, which can be used for Cr³⁺ and Hg²⁺ double ion detection with enhanced fluorescence specificity. Cr³⁺/Hg²⁺ and negatively charged Mn-QDs are bound together by electrostatic interactions. Meanwhile, the surface of Mn-QDs is rich in functional groups, which interacts with Cr³⁺/Hg²⁺ to modify the surface traps, leading to defect passivation and exhibiting photoluminescence enhancement. For the dynamic quenching produced by the interaction of Mn-QDs with Hg²⁺ within 50 μM, it may be caused by the complex formation of Hg²⁺ trapped by the amino group on the surface of Mn-QDs. The detection limits for Cr³⁺ and Hg²⁺ were 0.80 μM and 0.16 μM, respectively. The recoveries of Cr³⁺ and Hg²⁺ ions in real water samples were 93.79-105.10% and 93.91-102.05%, respectively, by standard addition recovery test. In this work, the application of Mn-QDs in Cr³⁺ and Hg²⁺ ion detection was researched, which opens a new way for its application in the field of detecting heavy metal ions.

Emerging Trends and Recent Progress of MXene as a Promising 2D Material for Point of Care (POC) Diagnostics

Two-dimensional (2D) nanomaterials with chemical and structural diversity have piqued the interest of the scientific community due to their superior photonic, mechanical, electrical, magnetic, and catalytic capabilities that distinguish them from their bulk counterparts. Among these 2D materials, two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides with a general chemical formula of M_n+1X_nT_x (where n = 1-3), together known as MXenes, have gained tremendous popularity and demonstrated competitive performance in biosensing applications. In this review, we focus on the cutting-edge advances in MXene-related biomaterials, with a systematic summary on their design, synthesis, surface engineering approaches, unique properties, and biological properties. We particularly emphasize the property-activity-effect relationship of MXenes at the nano-bio interface. We also discuss the recent trends in the application of MXenes in accelerating the performance of conventional point of care (POC) devices towards more practical approaches as the next generation of POC tools. Finally, we explore in depth the existing problems, challenges, and potential for future improvement of MXene-based materials for POC testing, with the goal of facilitating their early realization of biological applications.

Investigation on conformational variation and enzymatic activity of trypsin affected by Ti3C2 QDs via spectroscopic technique and molecular modeling

In this paper, Ti₃C₂ quantum dots (Ti₃C₂ QDs) were synthesized by simply treating Ti₃C₂ MXene powder with acid and base via hydrothermal method. Ti₃C₂ QDs exhibited superior fluorescence property and were used for the fluorescent imaging of living HeLa cells successfully. In order to evaluate the influence of Ti₃C₂ QDs on protease with specific biological functions, binding interaction of Ti₃C₂ QDs with trypsin was studied comprehensively and deeply through spectroscopic strategies and molecular modeling technique. The intrinsic fluorescence of trypsin was spontaneously quenched by Ti₃C₂ QDs through static quenching mode under van der Waals interaction force, and Ti₃C₂ QDs bound with the inactive residue domain of trypsin firmly with stoichiometric ratio of 1:1. Ti₃C₂ QDs induced the microenvironmental variation of the amino acid residues in trypsin, reducing the thermal stability of trypsin significantly. Gel electrophoresis experiments and microscopic imaging experiments demonstrated that Ti₃C₂ QDs inhibited the enzymatic activity of trypsin on the digestion of human serum albumin and HeLa cells obviously. These results revealed not only the deep interaction mechanism between Ti₃C₂ QDs and protease but also the influence of Ti₃C₂ QDs on the enzymatic activity of trypsin, paving the way for the safe biological application of Ti₃C₂ QDs in the diagnosis and the therapy of protease-related diseases.

Functional two-dimensional MXenes as cancer theranostic agents

Recently, MXenes, as a kind of two-dimensional (2D) layered materials with exceptional performance, have become the research hotspots owing to their unique structural, electronic, and chemical properties. They have potential applications in electrochemical storage, photocatalysis, and biosensors. Furthermore, they have certain characteristics such as large surface area, favorable biocompatibility, and ideal mechanical properties, which can expand their applications in biomedical fields, especially in cancer therapy. To date, several researchers have explored the applications of MXenes in tumor elimination, which exhibited other fantastic properties of those 2D MXenes, such as efficient in vivo photothermal ablation, low phototoxicity, high biocompatibility, etc. In this review, the structures, properties, modifications, and preparation methods are introduced respectively. More importantly, the multifunctional platforms for cancer therapy based on MXenes nanosheets (NSs) are reviewed in detail, including single-modality and combined-modality cancer therapy. Finally, the prospects and challenges of MXenes are prospected and discussed. STATEMENT OF SIGNIFICANCE: In this review, the structures, properties, modifications, and preparation methods of MXenes nanomaterials are introduced, respectively. In addition, the preparation conditions and morphological characterizations of some common MXenes for therapeutic platforms are also summarized. More importantly, the practical applications of MXenes-based nanosheets are reviewed in detail, including drug delivery, biosensing, bioimaging, and multifunctional tumor therapy platforms. Finally, the future prospects and challenges of MXenes are prospected and discussed.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Tunable fluorescent amino-functionalized Ti3C2Tx MXene quantum dots for ultrasensitive Fe3+ ion sensing

The development of sensors with high sensitivity, good selectivity and reproducibility are of great importance for the detection of Fe³⁺ in contaminated water for environmental monitoring. In this work, a reflux approach has been adopted to synthesize Ti₃C₂T_x quantum dots (QDs) based on the cutting effect of tetramethylammonium hydroxide (TMAOH) on Ti₃C₂T_x at high temperature. The surface-functionalized Ti₃C₂T_x QDs contained abundant amino groups and exhibited tunable pH-dependent emission, which was attributed to the protonation and deprotonation of the surface terminations. The linearity of the radiometric fluorescence intensity versus pH indicates its great potential as a dual-emission ratiometric pH sensor. Additionally, the Ti₃C₂T_x QDs exhibited tunable excitation-dependent emission behavior, which was related to the degree of passivation by the amino groups on the surface. Furthermore, the fluorescence intensity of the Ti₃C₂T_x QDs shows a linear response toward Fe³⁺ in the nanomolar to micromolar range with a low detection limit of 2 nM, originating from the oxidation and reduction between Fe³⁺ and Ti₃C₂T_x. This ultra-sensitive and selective detection capability demonstrated the environmental application potential for Ti₃C₂T_x QDs as a nanoprobe to monitor Fe³⁺.

Multi-activity cobalt ferrite/MXene nanoenzymes for drug-free phototherapy in bacterial infection treatment

Drug-free antibacterial strategies are of great significance for pathogenic bacterial infection treatment in clinical practice. Phototherapy with antibacterial function plays a vital role in mainstream germicidal research. However, phototherapy could lead to residual heat and excess reactive oxygen species (ROS), which are the main side-effects during antibacterial treatment. Unique CoFe₂O₄/MXene (CM) nanoenzymes, which were fabricated with electrostatic interactions, have been designed to conquer those challenges caused by side-effects of phototherapy in our research. The CM nanoenzymes possess many promising properties including photothermal and photodynamic induced phototherapy and mimic peroxidase (POD), glutathione oxidase (GSHOx), and catalase (CAT). Upon treatment with near-infrared (NIR) light, CM nanoenzymes can create a local high-temperature circumstance as well as raise bacterial membrane permeability. Furthermore, the photodynamic process and multi-enzyme-mimicking activities of CM enzymes boost the interbacterial ROS level. Herein, bacteria can hardly survive in synergistic phototherapy and multi-enzyme-mimicking catalytic therapy in vitro and in vivo. Meanwhile, the CM nanoenzymes exhibit excellent biocompatibility in vitro and in vivo. Overall, this research establishes a strong foundation for effectively employing nanoenzymes, leading to a new way to cure bacterial infections.

The CM nanoenzymes are synthesized with electrostatic interactions. Bacteria can hardly survive synergistic phototherapy and multi-enzyme-mimicking catalytic therapy with CM, which reinforces the foundation of drug-free antibacterial strategies.

MXenes in photomedicine: Advances and prospects

MXenes and their related nanocomposites with superior physicochemical properties such as high surface area, ease of synthesis and functionalization, high drug loading capacity, collective therapy potentials, pH-triggered drug release behavior,...