Carbon nanotubes decorated by mesoporous cobalt oxide as electrode material for lithium-ion batteries

A Review of Cobalt-Containing Nanomaterials, Carbon Nanomaterials and Their Composites in Preparation Methods and Application

With the increasing demand for sustainable and green energy, electric energy storage technologies have received enough attention and extensive research. Among them, Li-ion batteries (LIBs) are widely used because of their excellent performance, but in practical applications, the electrochemical performance of electrode materials is not satisfactory. Carbon-based materials with high chemical stability, strong conductivity, high specific surface area, and good capacity retention are traditional anode materials in electrochemical energy storage devices, while cobalt-based nano-materials have been widely used in LIBs anodes because of their high theoretical specific capacity. This paper gives a systematic summary of the state of research of cobalt-containing nanomaterials, carbon nanomaterials, and their composites in LIBs anodes. Moreover, the preparation methods of electrode materials and measures to improve electrochemical performance are also summarized. The electrochemical performance of anode materials can be significantly improved by compounding carbon nanomaterials with cobalt nanomaterials. Composite materials have better electrical conductivity, as well as higher cycle ability and reversibility than single materials, and the synergistic effect between them can explain this phenomenon. In addition, the electrochemical performance of materials can be significantly improved by adjusting the microstructure of materials (especially preparing them into porous structures). Among the different microscopic morphologies of materials, porous structure can provide more positions for chimerism of lithium ions, shorten the diffusion distance between electrons and ions, and thus promote the transfer of lithium ions and the diffusion of electrolytes.

Filled Carbon Nanotubes as Anode Materials for Lithium-Ion Batteries

Downsizing well-established materials to the nanoscale is a key route to novel functionalities, in particular if different functionalities are merged in hybrid nanomaterials. Hybrid carbon-based hierarchical nanostructures are particularly promising for electrochemical energy storage since they combine benefits of nanosize effects, enhanced electrical conductivity and integrity of bulk materials. We show that endohedral multiwalled carbon nanotubes (CNT) encapsulating high-capacity (here: conversion and alloying) electrode materials have a high potential for use in anode materials for lithium-ion batteries (LIB). There are two essential characteristics of filled CNT relevant for application in electrochemical energy storage: (1) rigid hollow cavities of the CNT provide upper limits for nanoparticles in their inner cavities which are both separated from the fillings of other CNT and protected against degradation. In particular, the CNT shells resist strong volume changes of encapsulates in response to electrochemical cycling, which in conventional conversion and alloying materials hinders application in energy storage devices. (2) Carbon mantles ensure electrical contact to the active material as they are unaffected by potential cracks of the encapsulate and form a stable conductive network in the electrode compound. Our studies confirm that encapsulates are electrochemically active and can achieve full theoretical reversible capacity. The results imply that encapsulating nanostructures inside CNT can provide a route to new high-performance nanocomposite anode materials for LIB.

Structural and Electronic Properties of Transition-Metal Oxides Attached to a Single-Walled CNT as a Lithium-Ion Battery Electrode: A First-Principles Study

Single-walled carbon nanotubes (SWCNTs) and metal oxides (MOs), such as manganese(IV) oxide (MnO₂), cobalt(II, III) oxide (Co₃O₄), and nickel(II) oxide (NiO) hybrid structures, have received great attention because of their promising application in lithium-ion batteries (LIBs). As electrode materials for LIBs, the structure of SWCNT/MOs provides high power density, good electrical conductivity, and excellent cyclic stability. In this work, first-principles calculations were used to investigate the structural and electronic properties of MOs attached to (5, 5) SWCNT and Li-ion adsorption to SWCNT/metal oxide composites as electrode materials in LIBs. Emphasis was placed on the synergistic effects of the composite on the electrochemical performance of LIBs in terms of adsorption capabilities and charge transfer of Li-ions attached to (5, 5) SWCNT and metal oxides. Also, Li adsorption energy on SWCNTs and three different metal oxides (NiO, MnO₂, and Co₃O₄) and the accompanying changes in the electronic properties, such as band structure, density of states and charge distribution as a function of Li adsorption were calculated. On the basis of the calculation results, the top C atom was found to be the most stable position for the NiO and MnO₂ attachment to SWCNT, while the Co₃O₄ molecule, the Co²⁺, was found to be the most stable attachment on SWCNT. The obtained results show that the addition of MOs to the SWCNT electrode enables an increase in specific surface area and improves the electronic conductivity and charge transfer of an LIB.

Cobalt oxide nanoparticle embedded N-CNTs: lithium ion battery applications

ZIF-12 is converted to Co/N-CNTs at 950 °C under an argon atmosphere. The obtained hybrid nanocomposite is used for LIBs application as an anode material with superior charge storage performance.