SnO2 nanosheets/graphite oxide/g-C3N4 composite as enhanced performance anode material for lithium ion batteries

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

A g-C3N4 self-templated preparation of N-doped carbon nanosheets@Co-Co3O4/Carbon nanotubes as high-rate lithium-ion batteries' anode materials

A novel N-doped graphene-like carbon nanosheets (CNs) and carbon nanotubes (CNTs)-encapsulated Co-Co₃O₄ nanoparticles (NPs) (CN@Co-Co₃O₄/CNTs) were synthesized successfully by a simple hydrothermal and annealing method with graphite carbon nitride (g-C₃N₄) as self-template. By annealing Co²⁺/g-C₃N₄ under N₂ atmosphere, g-C₃N₄ was transformed into CN/CNTs, and Co²⁺ was reduced into CoNPs which were embedded in CNs. Further annealing in air, a shell of Co₃O₄ was formed around CoNPs. The amount of CNs, CNTs, and CoNPs can be adjusted by changing the ratio of Co²⁺ in Co²⁺/g-C₃N₄. The graphene-like CNs provided a large number of active sites and a large specific surface area for loading lots of small CoNPs uniformly. The CNTs with a diameter of 100 nm could not only improve the conductivity but also provide a buffer space for the aggregation and volume expansion of Co₃O₄. CNTs also enlarged the interlayer distance of CNs, which prevented the re-stacking of CNs and provided great convince for the intercalation and de-intercalation of Li⁺. When applied for anode material of lithium-ion batteries, CN@Co-Co₃O₄/CNTs exhibited a high discharge capacity of 460.0 mAh g^-1 at 5000 mA g^-1 after 300 cycles with a Coulombic efficiency of 98% and excellent higher-rate capacity (401.0 mAh g^-1 at 2000 mA g^-1 and 329.0 mAh g^-1 at 5000 mA g^-1).

Facile Green Synthesis of Pseudocapacitance-Contributed Ultrahigh Capacity Fe2(MoO4)3 as an Anode for Lithium-Ion Batteries

The investigation into the use of earth-abundant elements as electrode materials for lithium-ion batteries (LIBs) is becoming more urgent because of the high demand for electric vehicles and portable devices. Herein, a new green synthesis strategy, based on a facile solid-state reaction with the assistance of water droplets' vapor, was conducted to prepare Fe₂(MoO₄)₃ nanosheets as anode materials for LIBs. The obtained sample possesses a two-dimensional stacked nanosheet construction with open gaps providing a much higher surface area compared to the bulk sample conventionally synthesized. The nanosheet sample delivers an ultrahigh reversible capacity (1983.6 mA h g^-1) at a current density of 100 mA g^-1 after 400 cycles, which could be related to the contribution of pseudocapacitance. The enhancement in cyclability and rated performance with an interesting increased capacity could be caused by the effect of electrochemical milling and the in situ formation of metallic particles in its lithium-ion storage mechanism.

A Facile Synthesis of MoS2/g-C3N4 Composite as an Anode Material with Improved Lithium Storage Capacity

The demand for well-designed nanostructured composites with enhanced electrochemical performance for lithium-ion batteries electrode materials has been emerging. In order to improve the electrochemical performance of MoS2-based anode materials, MoS2 nanosheets integrated with g-C3N4 (MoS2/g-C3N4 composite) was synthesized by a facile heating treatment from the precursors of thiourea and sodium molybdate at 550 °C under N2 gas flow. The structure and composition of MoS2/g-C3N4 were confirmed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis and elemental analysis. The lithium storage capability of the MoS2/g-C3N4 composite was evaluated, indicating high capacity and stable cycling performance at 1 C (A·g-1) with a reversible capacity of 1204 mA·h·g-1 for 200 cycles. This result is believed the role of g-C3N4 as a supporting material to accommodate the volume change and improve charge transport for nanostructured MoS2. Additionally, the contribution of the pseudocapacitive effect was also calculated to further clarify the enhancement in Li-ion storage performance of the composite.